Tłumaczymy nasz sklep na język polski!
Wymaga to jednak czasu, ponieważ w ofercie mamy dużo artykułów, a na nasz sklep składa się wiele stron. Chwilowo nasz katalog produktów dostępny będzie w języku angielskim. Dziękujemy za cierpliwość!
Jigs for Manual Tightening
Hand-tightening jigs are jigs for fixing a workpiece to a table or base jig of a machine tool by hand-tightening. This category includes clamping parts, clamping units and locating elements. Clamping parts are individual parts of jigs for hand tightening of workpieces and include screw jacks, toggle clamps, and T-slot nuts. Clamp units are jigs for fixing workpieces similar to clamping parts, but they are set consisting of various parts. Locating elements are tools and optional parts used for positioning and raising workpieces and supporting workpieces, such as guide blocks and straight pins.
Liczba pozycji: 753
* Informacje o dniach wysyłki, kosztach wysyłki i cenach.
- ZNIŻKA
AMF
6400 Screw jack with flat support
Screw jack with flat support Centring hole dia. 12 mm. Spindle: Trapezoidal thread, self-locking with end stopbody. Tempering steel, varnished. The product is available per 1 peace.Czytaj dalejKonfigurujCena (bez VAT) od:40.27 €～Cena specjalnaStandardowa data wysyłki:Towar dostępny w magazynie: 1 dzień roboczyNiektóre pozycje mogą zostać wysłane tego samego dnia
AMF
Clamping Module, Screw-In Version, Short Design, 6215RP-251
Clamping module, screw-in version, short design Pneumatic opening. Operating pressure for opening: min. 5 bar - max. 12 bar. Housing and piston hardened. Repetition accuracy < 0.1 mm.Czytaj dalejKonfigurujCena (bez VAT) od:238.42 €Standardowa data wysyłki:6 dni robocze
NABEYA
[Features]· 6830: SS400/6830NI: SUS304, 6830: Zinc-plated toggle-down clamp 6830. 6830S: The structure prevents operation unless holding the safety lever, preventing erroneous operation and malfunction.Czytaj dalejKonfigurujCena (bez VAT) od:63.71 €～Standardowa data wysyłki:6 dni robocze
- Volume Discount
GANTER
Base plate connector clamps / Aluminum / GN 163 / 2-with Stainless Steel-clamping screw DIN 912
The clamping bores of GN 163 base plate connector clamps are mechanically machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively. The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 911 (article code see table of dimensions).Czytaj dalejKonfigurujCena (bez VAT) od:23.26 €～Standardowa data wysyłki:7 dni robocze
AMF
Clamping Module, Mechanical, Screw-In Version, 6214M
Clamping module, mechanical, screw-in version Mechanical opening. Housing and piston hardened. Repetition accuracy < 0.1 mm.Czytaj dalejKonfigurujCena (bez VAT) od:158.94 €Standardowa data wysyłki:6 dni robocze
AMF
6321 Stepless height adjustable clamp
Stepless height adjustable clamp Steel, forged and tempered, zinc-plated. The product is available per 1 peace.Czytaj dalejKonfigurujCena (bez VAT) od:60.58 €～Standardowa data wysyłki:5 dni robocze
AMF
Installation Clamping Module, Screw-In Version, 6203L
Installation clamping module, screw-in version Pneumatic opening. Opening operating pressure: min. 6 bar - max. 12 bar. Cover and piston hardened. Repeatability < 0.02 mm.Czytaj dalejKonfigurujCena (bez VAT) od:559.03 €～Standardowa data wysyłki:6 dni robocze
AMF
6405 Aluminium screw jack with magnetic base
Aluminium screw jack with magnetic base Centring hole dia. 12 mm. Spindle: Tempering steel, blued. Trapezoidal thread, self-locking with end stopbody. Base: Aluminium 400 N/mm2 tensile strength. The product is available per 1 peace.Czytaj dalejKonfigurujCena (bez VAT) od:159.81 €～Standardowa data wysyłki:5 dni robocze
NABEYA
An inexpensive, compact clamp. The free swivel makes it easy to attach and detach workpieces.Czytaj dalejKonfigurujCena (bez VAT) od:58.53 €～Standardowa data wysyłki:6 dni robocze
SUPER TOOL
[Features]· For use with presses. Features a head portion with a large diameter dish. (FS70P does not have a lock nut)Czytaj dalejKonfigurujCena (bez VAT) od:58.89 €～Standardowa data wysyłki:6 dni robocze
- ZNIŻKA
AMF
6314V Tapered clamp with adjusting support screw
Tapered clamp with adjusting support screw Tempering steel, varnished. The product is available per 1 peace.Czytaj dalejKonfigurujCena (bez VAT) od:30.12 €～Cena specjalnaStandardowa data wysyłki:Towar dostępny w magazynie: 1 dzień roboczyNiektóre pozycje mogą zostać wysłane tego samego dnia
NABEYA
[Features]· Tightening is performed while pressing the movable part downward, preventing the workpiece from lifting.· Lifting prevention (generates force in the downward direction).· Ideal for thin workpieces.· Dovetail groove can withstand lateral force.· Free Mounting PositionCzytaj dalejKonfigurujCena (bez VAT) od:411.04 €～Standardowa data wysyłki:8 dni robocze
- Volume Discount
SUPER TOOL
[Features]· Ideal for thin workpieces and clamping mass production products.· Irregular articles can also be clamped with ease.· Clamping operation is quick and easy.· The material and hardness are suitable for repeated operation, and the contact surface does not cling to workpieces and clamp rings.Czytaj dalejKonfigurujCena (bez VAT) od:23.73 €～Standardowa data wysyłki:9 dni robocze![Long Clamp [With Screw Hole] EA637CL-20](https://uk.misumi-ec.com/linked/material/fs/ESC1/PHOTO/223007318376_001.jpg)
ESCO
Long Clamp [With Screw Hole] EA637CL-20
【Product Specifications】・Material-Quenched steel・A…40・B…60・E…298・I…47・N…221Czytaj dalejKonfigurujCena (bez VAT) od:168.92 €Standardowa data wysyłki:9 dni robocze
AMF
6313K Clamp, short with saddle
Clamp short with saddle continuously adjustable, tempered, galvanized and blue passivated. The product is available per 1 peace.Czytaj dalejKonfigurujCena (bez VAT) od:40.73 €～Standardowa data wysyłki:5 dni robocze
AMF
Installation Clamping Module, Screw-In Version, with Pneumatic Opening, 6370EARL
Installation clamping module, screw-in version Pneumatic opening. Opening operating pressure: min. 8 bar - max. 12 bar. Retensioning operating pressure (turbo): min. 5 bar - max. 6 bar. Cover and piston hardened. Repeatability < 0.005 mm.Czytaj dalejKonfigurujCena (bez VAT) od:911.63 €Standardowa data wysyłki:6 dni robocze
AMF
Surface-Mounted Clamping Module with Pneumatic Opening, 6370AARL
Surface-mounted clamping module Pneumatic opening. Opening operating pressure: min. 8 bar - max. 12 bar. Retensioning operating pressure (turbo): min. 5 bar - max. 6 bar. Cover and piston hardened. Repeatability < 0.005 mm.Czytaj dalejKonfigurujCena (bez VAT) od:1,755.67 €Standardowa data wysyłki:6 dni robocze
NORELEM
· Flexible positioning through off-centre fastening hole· Contact faces ground and tempered· Fastened with a socket head screw· Various heights available· For supporting workpiecesCzytaj dalejKonfigurujCena (bez VAT) od:27.79 €～Standardowa data wysyłki:4 dni robocze
KonfigurujCena (bez VAT) od:5.48 €～Standardowa data wysyłki:4 dni robocze
AMF
Heavy screw jack with nickel lock bolt. Centring hole D12 / M10. Spindle: Tempered steel, self-locking acme thread, with final stop. Spindle head burnished. Body: tempered steel, painted.Czytaj dalejKonfigurujCena (bez VAT) od:406.16 €～Standardowa data wysyłki:6 dni robocze
NORELEM
Screw rest with flat face, steel (02170)
· Supporting overhanging clamping points· Prevents vibrations and bending· Height-adjustable· Flexible positioning· Self-locking trapezoidal threadCzytaj dalejKonfigurujCena (bez VAT) od:30.33 €～Standardowa data wysyłki:4 dni robocze
NABEYA
It is a part for toe adjustment clamp. The screw is common to all sizes. The manufacturer sell from partsCzytaj dalejKonfigurujCena (bez VAT) od:32.18 €Standardowa data wysyłki:6 dni robocze
SUPER TOOL
Slide Clamp A Type (Set of 2)【2 szt.】
[Features]· The tip of the jaw is engraved with a rack to clamp the workpiece downwards.· Operation consists of inserting the wrench, and tightening in order to clamp the workpiece by the clamp head sliding along a 45° inclination.Czytaj dalejKonfigurujCena (bez VAT) od:282.41 €～Standardowa data wysyłki:9 dni robocze
- ZNIŻKA
AMF
Plain clamp Tempering steel, varnished. The product is available per 1 peace.Czytaj dalejKonfigurujCena (bez VAT) od:9.46 €～Cena specjalnaStandardowa data wysyłki:Towar dostępny w magazynie: 1 dzień roboczyNiektóre pozycje mogą zostać wysłane tego samego dnia
AMF
Step clamp Tempering steel, varnished. Only match step blocks no. 6500E. The longer versions are used for large clamping distances due to large T-slot distance or enlarged work depth, i.e. on graving machines. The product is available per 1 peace.Czytaj dalejKonfigurujCena (bez VAT) od:15.81 €～Standardowa data wysyłki:5 dni robocze
AMF
Aluminium screw jack Centring hole dia. 12 mm. Spindle: Tempering steel, blued, Trapezoidal thread, self-locking with end stopbody. Base: Aluminium 400 N/mm2 tensile strength. The product is available per 1 peace.Czytaj dalejKonfigurujCena (bez VAT) od:66.34 €～Standardowa data wysyłki:5 dni robocze
AMF
Vee-pad Steel tempered, burnished. The product is available per 1 peace.Czytaj dalejKonfigurujCena (bez VAT) od:33.93 €～Standardowa data wysyłki:5 dni robocze
- Volume Discount
GANTER
Clamping plates for position indicators / GN 953.6 / B14, B15, B16, B20
Clamping plates GN 953.6 are used in connection with position indicators GN 953 / GN 9053.In a simpler way and without large construction and installation effort these spindles can, after adjustment, be clamped and locked.At the same time these plates are fitted with the bore Ø 6,1 to accept the torque limiter for the position indicator.The spacer can be installed so that it lies as required either to the right or the left.Czytaj dalejKonfigurujCena (bez VAT) od:20.60 €～Standardowa data wysyłki:Towar dostępny w magazynie: 1 dzień roboczyNiektóre pozycje mogą zostać wysłane tego samego dnia
- ZNIŻKA
- Volume Discount
GANTER
Flanged connector clamps / Aluminium / GN 145 / 2-with Stainless Steel-clamping screw DIN 912
The clamping bores of GN 145 flanged connector clamps are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.GN 145 flanged connector clamps are also suitable for mounting on profile systems.The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 911 (article code see table of dimensions).Czytaj dalejKonfigurujCena (bez VAT) od:19.96 €～Cena specjalnaStandardowa data wysyłki:Towar dostępny w magazynie: 1 dzień roboczyNiektóre pozycje mogą zostać wysłane tego samego dnia
AMF
Clamping Module, Screw-In Version, 6215RP
Clamping module, screw-in version Pneumatic opening. Opening operating pressure: min. 5 bar - max. 12 bar. Housing and piston hardened. Repetition accuracy < 0.1 mm.Czytaj dalejKonfigurujCena (bez VAT) od:208.27 €Standardowa data wysyłki:6 dni robocze
KonfigurujCena (bez VAT) od:106.29 €～Standardowa data wysyłki:6 dni robocze
NABEYA
Low Edge Clamp (Double Sided Type)
It is a compact clamp that does not lift much. Ideal for machining thin, low-profile objects. There are three sizes of tightening bolts: M4, M6, and M12. It has a compact size and large stroke of 0.3 to 1.1. The guide groove of the main body shortens workpiece setup time (excluding LWC4). It has a structure that prevents chips from entering inside.Czytaj dalejKonfigurujCena (bez VAT) od:34.36 €～Standardowa data wysyłki:8 dni robocze
NABEYA
6848HNI is made of stainless steel. The hook length can be adjusted.Czytaj dalejKonfigurujCena (bez VAT) od:104.68 €～Standardowa data wysyłki:8 dni robocze
NABEYA
Low Edge Clamp (One Sided Type)
[Features]· It is a compact clamp that does not lift much.· Ideal for machining thin, low-profile objects.· There are three sizes of tightening bolts: M4, M6, and M12.· It has a compact size and large stroke of 0.3 to 1.1.· The guide groove of the main body shortens workpiece setup time (excluding LWC4).· It has a structure that prevents chips from entering inside.· Ideal for small workpieces.· Brass material is used to avoid scratching workpieces.· Lifting up of the workpiece is minimal.· Ideal for thin workpieces.Czytaj dalejKonfigurujCena (bez VAT) od:21.01 €～Standardowa data wysyłki:6 dni robocze
NABEYA
Q Lock (Screw Type) Clamp Bushing
A two-sided restraint type jig setup element that provides high speed, high precision, and high rigidity, for the replacement and positioning of jigs. It can be incorporated into an existing jig. Can be used for the automatic replacement of jigs.Czytaj dalejKonfigurujCena (bez VAT) od:114.72 €～Standardowa data wysyłki:6 dni robocze
- ZNIŻKA
- Volume Discount
NEW STRONG
[Features] Materials: EN 1.1191 Equiv., hardness: HRC35, black oxide coating, finish.Czytaj dalejKonfigurujCena (bez VAT) od:20.32 €～Cena specjalnaStandardowa data wysyłki:Towar dostępny w magazynie: 1 dzień roboczyNiektóre pozycje mogą zostać wysłane tego samego dnia
- Volume Discount
ESCO
Diamond-Shaped T-Slot Nut EA637FS-18
【Product Specifications】・Material-Quenched steel・TSlot…18・Screw…M16・A…20・C…28・D…10Czytaj dalejKonfigurujCena (bez VAT) od:22.78 €Standardowa data wysyłki:9 dni robocze
ESCO
【Product Specifications】・Material-Quenched steel・Screw…M24・D1…25・D…60・H…8Czytaj dalejKonfigurujCena (bez VAT) od:11.13 €Standardowa data wysyłki:9 dni robocze
- ZNIŻKA
- Volume Discount
AMF
Low type tenons Steel C15, case hardened and ground. The product is available per 1 peace.Czytaj dalejKonfigurujCena (bez VAT) od:11.24 €～Cena specjalnaStandardowa data wysyłki:Towar dostępny w magazynie: 1 dzień roboczyNiektóre pozycje mogą zostać wysłane tego samego dnia
AMF
6490 Low height clamping jaws, model Bulle
Low height clamping jaws, model Bulle tempered and burnished. Packing: 2 units in carton, complete with cap screw ISO 4762-10.9, T-nuts DIN 508 and hexagon key ISO 2936. Available in pairs only! The product is available per 1 peace.Czytaj dalejKonfigurujCena (bez VAT) od:148.85 €～Standardowa data wysyłki:5 dni robocze
AMF
6492 Flat clamp, model Mini-Bulle
Flat clamp, model Mini-Bulle tempered and burnished. Packing: 2 units in carton, complete with fastening screws ISO 4762 (8.8) and hexagon key ISO 2936. Only delivered in pairs! The product is available per 1 peace.Czytaj dalejKonfigurujCena (bez VAT) od:139.04 €～Standardowa data wysyłki:5 dni robocze
- Volume Discount
AMF
Angle base, solid for no. 6840 and no. 6844. Increased range of application due to enlarged height of center line. Fastening by means of 4 screws. The product is available per 1 peace.Czytaj dalejKonfigurujCena (bez VAT) od:10.09 €～Standardowa data wysyłki:4 dni robocze
- ZNIŻKA
- Volume Discount
GANTER
Base plate connector clamps / Aluminum / GN 162.3 / 2-with Stainless Steel-clamping screw DIN 912
The clamping bore of GN 162.3 base plate connector clamps is mechanically machined and designed for construction tubes GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.Base plate connector clamps GN 162.3 are also suitable for mounting on profile systems.The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 911 (article code see table of dimensions).Czytaj dalejKonfigurujCena (bez VAT) od:19.10 €～Cena specjalnaStandardowa data wysyłki:Towar dostępny w magazynie: 1 dzień roboczyNiektóre pozycje mogą zostać wysłane tego samego dnia
- Volume Discount
GANTER
Clamping plates for position indicators / GN 954.6 / B8, B10, B12, B14
Clamping plates GN 954.6 are used in connection with position indicators GN 954 / GN 9054.In a simpler way and without large construction and installation effort these spindles can, after adjustment, be clamped and locked.At the same time these plates are fitted with the bore Ø 6,1 to accept the torque limiter for the position indicator.The spacer can be installed so that it lies as required either to the right or the left.Czytaj dalejKonfigurujCena (bez VAT) od:18.12 €Standardowa data wysyłki:4 dni robocze
- ZNIŻKA
- Volume Discount
GANTER
Stainless Steel-Flanged connector clamps
The clamping bores of GN 145 flanged connector clamps are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectivelyGN 145 flanged connector clamps are also suitable for mounting on profile systems. The standard version of the clamping screw is a socket cap screw with hexagonal socket DIN 912. It can be replaced by a clamping kit GN 911 (article code see table of dimensions).Czytaj dalejKonfigurujCena (bez VAT) od:45.90 €～Cena specjalnaStandardowa data wysyłki:Towar dostępny w magazynie: 1 dzień roboczyNiektóre pozycje mogą zostać wysłane tego samego dnia