NABEYA Jigs for Manual Tightening

[Features]· 6830: SS400/6830NI: SUS304, 6830: Zinc-plated toggle-down clamp 6830. 6830S: The structure prevents operation unless holding the safety lever, preventing erroneous operation and malfunction.

An inexpensive, compact clamp. The free swivel makes it easy to attach and detach workpieces.

Dedicated clamping screw for toggle clamps.

[Features]· 6800: SS400/6800NI: SUS304, 6800: Zinc-plated toggle-down clamp 6800.· 6800S: The structure prevents operation unless holding the safety lever, preventing erroneous operation and malfunction.

It is a compact clamp that does not lift much. Ideal for machining thin, low-profile objects. There are three sizes of tightening bolts: M4, M6, and M12. It has a compact size and large stroke of 0.3 to 1.1. The guide groove of the main body shortens workpiece setup time (excluding LWC4). It has a structure that prevents chips from entering inside.

Clamp support screw jack is convenient for supporting a variety of clamps. When one unit is insufficient in operation or height, two or three units can be stacked together. (Only for same sizes) The attachment is convenient for supporting irregular objects.

· Attachment for No. E-9175A can be used for SJK type.· SJK-K type is provided with through holes in the center of the jack, making it possible to fix the jacks using bolts, etc.

Convenient for clamp table and raising blocks of large machinery workpieces.

6844: SS400/6844NI: SUS304/6844: Zinc-plated toggle side clamp 6844.

It can steplessly fasten tall and short workpieces.

Annoying thread feeding when clamping is not necessary. Quick action clamp which adopts a cam lock mechanism.

It is a part for toe adjustment clamp. The screw is common to all sizes. The manufacturer sell from parts

An inexpensive, compact clamp. The free swivel makes it easy to attach and detach workpieces.

6841: SS400, 6841NI: SUS304/6841: Zinc-plated toggle side clamp 6841.

[Features]· It is a compact clamp that does not lift much.· Ideal for machining thin, low-profile objects.· There are three sizes of tightening bolts: M4, M6, and M12.· It has a compact size and large stroke of 0.3 to 1.1.· The guide groove of the main body shortens workpiece setup time (excluding LWC4).· It has a structure that prevents chips from entering inside.· Ideal for small workpieces.· Brass material is used to avoid scratching workpieces.· Lifting up of the workpiece is minimal.· Ideal for thin workpieces.

[Features]· The one that fits the workpiece can be selected from the various types of attachments.· For N0.E-175 clamp support screw jack and N0.E-176 screw jack only.

Attachment for No. E-175A can be used for SJK type. SJK-K type is provided with through holes in the center of the jack, making it possible to fix the jacks using bolts, etc.

A clamp bar for L-type nut runners. This product can be additionally processed by the customer.[Features]· Torque control and speedy clamping can be performed by using Nut Runner.· Quasi-hydraulic operability, no piping is required so it is handy to use.· Clamp bar springs up to easily attach/detach the workpiece.· Free from troubles such as oil leakage as it does not use oil.

A two-sided restraint type jig setup element that provides high speed, high precision, and high rigidity, for the replacement and positioning of jigs. It can be incorporated into an existing jig. Can be used for the automatic replacement of jigs.

EN 1.7264 Equiv., Hardening HRC60 eccentricity height cylinder.Compatible bolts are M12/16.

Chips bite into in the aluminum base, leaving no scratches on the machine table. Lightweight as it is made of aluminum.

Forged S45C/hardened HRC45 arm clamp.

Flat jaw and angled handle for quick hold down clamp (medium).

[Features]· Bar for Quick Lock.· Annoying thread feeding when clamping is not necessary.· A one-action clamp that adopts a cam lock mechanism

Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.

For the T-slot on the clamping part of the wedge clamp set. Compatible T-groove 14 mm to 22 mm, clamp stroke 6 mm. The workpiece contact surface is a flat type. The manufacturer also sells the clamp part only.

Wedge clamp set for T-grooves, flat type.

An inexpensive, compact clamp. The free swivel makes it easy to attach and detach workpieces.

Of course, it can also be used for height adjustment in fixing workpieces. It can be used for both T-grooves and tap holes.

This product can clamp 2 workpieces at the same time. Due to its compact structure (cylinder diameter 10 mm to 30 mm), it can be used in small spaces. The freely rotating structure saves time when loading and unloading the workpieces.

Tightening is performed while pressing the movable part downward, preventing the workpiece from lifting.

It is the base part of the Clamp Unit 7110 series. By combining various parts (spacers and supports), the height can be adjusted to suit the workpiece.

It will be the base part of the Clamp Unit 7111 series. By combining various parts (spacers and supports), the height can be adjusted to suit the workpiece.

Includes a hex wrench. Completely tightened with a sliding mechanism. Saves time thanks to its "one point" fitting and removal function. For machining the whole top surface of the workpiece and through-hole machining. Fully heat-treated for semi-permanent use. A workpiece rising prevention mechanism type.

Includes a hex wrench. Completely tightened with a sliding mechanism. Saves time thanks to its "one point" fitting and removal function. For machining the whole top surface of the workpiece and through-hole machining. Fully heat-treated for semi-permanent use. A workpiece rising prevention mechanism type.

With wrench operation from the side, the jaw is locked in the downward direction, and the workpiece does not rise up.

Made of aluminum so doesn't scratch the base, clamps, etc. Convenient for use as a support jack for plastic clamp sets.

The workpiece is prevented from rising up by being fastened downward. Ideal for machining through holes.

It serves as the base for clamping the side of large-scale processing machine workpieces. Compatible with workpiece contact side tapped hole M 20 / Table mounting side slotted hole structure allows fine adjustment

[Features]· Simply insert into the T-groove.· Useful for receiving cutting resistance from the side.· The tap hole opening is horizontal to the table. With stopper bolt.

[Features]· Simply insert into the T-groove.· Useful for receiving cutting resistance from the side.· Especially for large processing machines

[Features]· Simply insert into the T-groove.· Useful for receiving cutting resistance from the side.· Especially for large processing machines. Cutting resistance is received with greater strength by clamping the step part

S45C / quenched base unit low type (for T slot).

This product can clamp 2 workpieces at the same time. It has a compact structure and can be used in small spaces. The freely rotatable structure saves time in loading and unloading workpieces.

[Features]· Tightening is performed while pressing the movable part downward, preventing the workpiece from lifting.· Lifting prevention (generates force in the downward direction).· Ideal for thin workpieces.· Dovetail groove can withstand lateral force.· Free Mounting Position