Tłumaczymy nasz sklep na język polski!
Wymaga to jednak czasu, ponieważ w ofercie mamy dużo artykułów, a na nasz sklep składa się wiele stron. Chwilowo nasz katalog produktów dostępny będzie w języku angielskim. Dziękujemy za cierpliwość!
Clamp Units (for Manual Tightening) (Strona 2)
The clamp unit (for hand tightening) is an auxiliary tool for holding and securing the workpiece while working. If the work is not firmly secured, it will lift up or become misaligned, so a clamp unit that is optimal for each work will be required. The shape and size vary depending on what is secured and how to secure it, such as a slide clamp that secures the workpiece from the side, etc. In addition, there are various types of clamp units, such as a type suitable for thin clamps that tighten while pressing the claw at the tip downward, a type that can be tightened steplessly according to the height of the workpiece, a side jack ideal for large processing machines, etc. Therefore, it is necessary to select the best one according to the application, work environment, etc.
Liczba pozycji: 211
* Informacje o dniach wysyłki, kosztach wysyłki i cenach.
NABEYA
Swing Clamp Height Adjusting Support
Of course, it can also be used for height adjustment in fixing workpieces. It can be used for both T-grooves and tap holes.Czytaj dalejKonfigurujCena (bez VAT) od:98.09 €Standardowa data wysyłki:6 dni robocze
NABEYA
This product can clamp 2 workpieces at the same time. Due to its compact structure (cylinder diameter 10 mm to 30 mm), it can be used in small spaces. The freely rotating structure saves time when loading and unloading the workpieces.Czytaj dalejKonfigurujCena (bez VAT) od:81.28 €Standardowa data wysyłki:6 dni robocze
NABEYA
Tightening is performed while pressing the movable part downward, preventing the workpiece from lifting.Czytaj dalejKonfigurujCena (bez VAT) od:300.23 €Standardowa data wysyłki:8 dni robocze
NABEYA
It is the base part of the Clamp Unit 7110 series. By combining various parts (spacers and supports), the height can be adjusted to suit the workpiece.Czytaj dalejKonfigurujCena (bez VAT) od:526.97 €Standardowa data wysyłki:8 dni robocze
NABEYA
It will be the base part of the Clamp Unit 7111 series. By combining various parts (spacers and supports), the height can be adjusted to suit the workpiece.Czytaj dalejKonfigurujCena (bez VAT) od:980.38 €Standardowa data wysyłki:8 dni robocze
NABEYA
Includes a hex wrench. Completely tightened with a sliding mechanism. Saves time thanks to its "one point" fitting and removal function. For machining the whole top surface of the workpiece and through-hole machining. Fully heat-treated for semi-permanent use. A workpiece rising prevention mechanism type.Czytaj dalejKonfigurujCena (bez VAT) od:183.15 €Standardowa data wysyłki:8 dni robocze
NABEYA
Includes a hex wrench. Completely tightened with a sliding mechanism. Saves time thanks to its "one point" fitting and removal function. For machining the whole top surface of the workpiece and through-hole machining. Fully heat-treated for semi-permanent use. A workpiece rising prevention mechanism type.Czytaj dalejKonfigurujCena (bez VAT) od:317.12 €Standardowa data wysyłki:8 dni robocze
NABEYA
With wrench operation from the side, the jaw is locked in the downward direction, and the workpiece does not rise up.Czytaj dalejKonfigurujCena (bez VAT) od:190.69 €Standardowa data wysyłki:8 dni robocze
NABEYA
Clamp Part of Wedge Clamp (for Tapped Holes)
The workpiece is prevented from rising up by being fastened downward. Ideal for machining through holes.Czytaj dalejKonfigurujCena (bez VAT) od:120.76 €Standardowa data wysyłki:6 dni robocze
NABEYA
It serves as the base for clamping the side of large-scale processing machine workpieces. Compatible with workpiece contact side tapped hole M 20 / Table mounting side slotted hole structure allows fine adjustmentCzytaj dalejKonfigurujCena (bez VAT) od:144.21 €Standardowa data wysyłki:8 dni robocze
NABEYA
[Features]· Simply insert into the T-groove.· Useful for receiving cutting resistance from the side.· The tap hole opening is horizontal to the table. With stopper bolt.Czytaj dalejKonfigurujCena (bez VAT) od:85.95 €Standardowa data wysyłki:8 dni robocze
NABEYA
[Features]· Simply insert into the T-groove.· Useful for receiving cutting resistance from the side.· Especially for large processing machinesCzytaj dalejKonfigurujCena (bez VAT) od:330.40 €Standardowa data wysyłki:8 dni robocze
NABEYA
[Features]· Simply insert into the T-groove.· Useful for receiving cutting resistance from the side.· Especially for large processing machines. Cutting resistance is received with greater strength by clamping the step partCzytaj dalejKonfigurujCena (bez VAT) od:357.25 €Standardowa data wysyłki:8 dni robocze
KonfigurujCena (bez VAT) od:326.73 €Standardowa data wysyłki:8 dni robocze
NABEYA
This product can clamp 2 workpieces at the same time. It has a compact structure and can be used in small spaces. The freely rotatable structure saves time in loading and unloading workpieces.Czytaj dalejKonfigurujCena (bez VAT) od:103.20 €Standardowa data wysyłki:6 dni robocze
NABEYA
[Features]· Tightening is performed while pressing the movable part downward, preventing the workpiece from lifting.· Lifting prevention (generates force in the downward direction).· Ideal for thin workpieces.· Dovetail groove can withstand lateral force.· Free Mounting PositionCzytaj dalejKonfigurujCena (bez VAT) od:411.04 €Standardowa data wysyłki:8 dni robocze
NABEYA
[Features]· SS400 and galvanized toggle down clamp 6803.· 6803S: Since it has a structure where it cannot be operated unless the safety lever is gripped, it prevents error operation and malfunction.Czytaj dalejKonfigurujCena (bez VAT) od:95.70 €Standardowa data wysyłki:6 dni robocze
NABEYA
6848VNI is made of stainless steel. The hook length can be adjusted.Czytaj dalejKonfigurujCena (bez VAT) od:104.78 €Standardowa data wysyłki:6 dni robocze
NABEYA
Includes a hex wrench. Completely tightened with a sliding mechanism. Saves time thanks to its "one point" fitting and removal function. For machining the whole top surface of the workpiece and through-hole machining. Fully heat-treated for semi-permanent use. A workpiece rising prevention mechanism type.Czytaj dalejKonfigurujCena (bez VAT) od:273.98 €Standardowa data wysyłki:8 dni robocze
KonfigurujCena (bez VAT) od:2,238.87 €Standardowa data wysyłki:8 dni robocze
NABEYA
Heavy Duty Toggle Side Clamp 6842PL
Can be used for either pushing or pulling. Clamping screw and rubber cap attached.Czytaj dalejKonfigurujCena (bez VAT) od:181.34 €Standardowa data wysyłki:8 dni robocze
NABEYA
Heavy Duty Toggle Side Clamp 6845
Can be used for either pushing or pulling. Clamping screw and rubber cap attached.Czytaj dalejKonfigurujCena (bez VAT) od:150.80 €Standardowa data wysyłki:6 dni robocze
NABEYA
Heavy Duty Toggle Hook Clamp 6849PH
Heavy-duty type hook clamp. The hook length can be adjusted.Czytaj dalejKonfigurujCena (bez VAT) od:337.52 €Standardowa data wysyłki:8 dni robocze
NABEYA
Can be selected from T-slot nut (T-groove type) / T-slot nut (tapped hole type).Czytaj dalejKonfigurujCena (bez VAT) od:155.22 €Standardowa data wysyłki:6 dni robocze
NABEYA
Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.Czytaj dalejKonfigurujCena (bez VAT) od:21.41 €Standardowa data wysyłki:8 dni roboczeNABEYA
Adjustment Bolt for Quick Lock
Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.Czytaj dalejKonfigurujCena (bez VAT) od:51.73 €Standardowa data wysyłki:8 dni robocze- Volume Discount
NABEYA
Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.Czytaj dalejKonfigurujCena (bez VAT) od:5.47 €Standardowa data wysyłki:10 dni roboczeNABEYA
Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.Czytaj dalejKonfigurujCena (bez VAT) od:26.47 €Standardowa data wysyłki:8 dni robocze
NABEYA
Wedge Clamp Stopper Part (for T-Shaped Grooves)
It is for the T-groove of the stopper part of the wedge clamp set. Compatible T-groove 14 mm to 22 mm, Workpiece contact surface can be selected from 3 types: flat, step, universal type. The manufacturer also sell the stopper part only.Czytaj dalejKonfigurujCena (bez VAT) od:118.28 €Standardowa data wysyłki:8 dni roboczeNABEYA
Wedge Clamp Stopper Part (for Tapped Holes)
Wedge clamp, stopper tapped hole, flat type.Czytaj dalejKonfigurujCena (bez VAT) od:110.13 €Standardowa data wysyłki:8 dni robocze
NABEYA
Wedge Clamp Set (for Tapped Holes)
The workpiece is prevented from rising up by being fastened downward. Ideal for machining through holes.Czytaj dalejKonfigurujCena (bez VAT) od:190.52 €Standardowa data wysyłki:6 dni robocze
NABEYA
This is the clamp unit part of the Clamp Unit 7110 series. M 12 mm, M 16 mm / Select from 2 types. Since it is a unit, nuts, bolts, support screws (height adjustment), etc., are included, so there is no need to assemble.Czytaj dalejKonfigurujCena (bez VAT) od:751.04 €Standardowa data wysyłki:8 dni robocze
NABEYA
It can be horizontally swung to attach and remove workpieces. Can be used for T-grooves and for tapped holes. Automatically rises via a built-in spring when unclamped. Attachments can be mounted.Czytaj dalejKonfigurujCena (bez VAT) od:341.63 €Standardowa data wysyłki:8 dni robocze
NABEYA
[Features]· It can be horizontally swung to attach and remove workpieces.· Can be used for T-grooves and for tapped holes.· The dedicated height adjust support enables the clamp height to be adjusted to the workpiece.· Tool-less (with handle).· Free clamping direction (without guide groove).· The built-in spring causes it to automatically rise when unclamping.· Attachments can be mountedCzytaj dalejKonfigurujCena (bez VAT) od:363.36 €Standardowa data wysyłki:6 dni robocze
NABEYA
This is a block for adjusting the height of the S-type swing clamp set. If the height of the S-type swing clamp set is not sufficient, select the S-type swing clamp joint. M 8 mm, M 16 mm / 2 types availableCzytaj dalejKonfigurujCena (bez VAT) od:21.12 €Standardowa data wysyłki:6 dni robocze
NABEYA
Single-action clamp for vertical clamp. There is no troublesome screw feeding. The 6802S type also has a careless mistake reduction function that makes it impossible to operate without holding the safety lever.Czytaj dalejKonfigurujCena (bez VAT) od:78.04 €Standardowa data wysyłki:6 dni robocze
NABEYA
Toggle Side Clamp 6850 (Pneumatic Type)
Comes with a double-acting pneumatic cylinder.Czytaj dalejKonfigurujCena (bez VAT) od:814.43 €Standardowa data wysyłki:6 dni robocze
NABEYA
Suitable for tightening drum and can lids. The hook length can be adjusted.Czytaj dalejKonfigurujCena (bez VAT) od:143.56 €Standardowa data wysyłki:8 dni robocze
NABEYA
The structure prevents return unless the button is pressed, preventing erroneous operation and malfunction. Suitable for tightening drum and can lids. The hook length can be adjusted.Czytaj dalejKonfigurujCena (bez VAT) od:201.86 €Standardowa data wysyłki:8 dni robocze
NABEYA
[Features]· Parts for universal clamps.· It can steplessly fasten tall and short workpieces.Czytaj dalejKonfigurujCena (bez VAT) od:74.93 €Standardowa data wysyłki:6 dni roboczeNABEYA
PA Adjustment Bolt for Quick Lock
Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.Czytaj dalejKonfigurujCena (bez VAT) od:21.41 €Standardowa data wysyłki:8 dni roboczeNABEYA
Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.Czytaj dalejKonfigurujCena (bez VAT) od:31.53 €Standardowa data wysyłki:8 dni roboczeNABEYA
Simply insert into the T-groove. Useful for receiving cutting resistance from the side.Czytaj dalejKonfigurujCena (bez VAT) od:65.38 €Standardowa data wysyłki:8 dni robocze
NABEYA
It will be the spacer part of the Clamp Unit 7111 series. By combining various parts (base part and support part), the height can be changed to suit the workpiece.Czytaj dalejKonfigurujCena (bez VAT) od:691.30 €Standardowa data wysyłki:8 dni robocze
NABEYA
It will be the spacer part of the Clamp Unit 7112 series. By combining various parts (base part and support part), the height can be changed to suit the workpiece.Czytaj dalejKonfigurujCena (bez VAT) od:236.81 €Standardowa data wysyłki:8 dni robocze
