NABEYA Clamp Units (for Manual Tightening)

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 12 Days or Less 14 Days or Less

?* Information on days to ship and prices

Swing Clamp S Type

NABEYA

An inexpensive, compact clamp. The free swivel makes it easy to attach and detach workpieces.

Starting from^∗ ：	60.88 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Promotional pricing

Toggle Down Clamp 6830

NABEYA

[Features]
· 6830: SS400/6830NI: SUS304, 6830: Zinc-plated toggle-down clamp 6830. 6830S: The structure prevents operation unless holding the safety lever, preventing erroneous operation and malfunction.

Starting from^∗ ：	63.76 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Vacuum Chuck

NABEYA

[Features]
· Adsorption of workpieces is possible by simply supplying air from a compressor.
· Supports non-magnetic workpieces such as aluminum, stainless steel, and copper, etc. with which a magnetic chuck cannot be used.
· VCM0303E.
· Supply valve can only turn the adsorption ON or OFF.
· VCM0303S.
· Adsorption and air blowing are both possible using the changeover switch.
· The current adsorption force can be confirmed by vacuum pressure gauge.
· Adsorption force can be adjusted by vacuum regulator

Starting from^∗ ：	2,454.42 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Heavy Duty Toggle Side Clamp 6842PL

NABEYA

Can be used for either pushing or pulling. Clamping screw and rubber cap attached.

Starting from^∗ ：	188.63 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Toggle Hook Clamp 6848V

NABEYA

6848VNI is made of stainless steel. The hook length can be adjusted.

Starting from^∗ ：	108.98 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Toggle Down Clamp 6832

NABEYA

[Features]
· SS400/galvanized toggle down clamp 6832.
· 6832S: The structure prevents operation unless holding the safety lever, preventing erroneous operation and malfunction.

Starting from^∗ ：	66.26 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Nut Runner Clamp Large Model

NABEYA

A clamp bar for L-type nut runners. This product can be additionally processed by the customer.

[Features]
· Torque control and speedy clamping can be performed by using Nut Runner.
· Quasi-hydraulic operability, no piping is required so it is handy to use.
· Clamp bar springs up to easily attach/detach the workpiece.
· Free from troubles such as oil leakage as it does not use oil.

Starting from^∗ ：	659.44 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Double Swing Clamp S Type

NABEYA

This product can clamp 2 workpieces at the same time. Due to its compact structure (cylinder diameter 10 mm to 30 mm), it can be used in small spaces. The freely rotating structure saves time when loading and unloading the workpieces.

Starting from^∗ ：	84.55 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Toggle Side Clamp 6844

NABEYA

6844: SS400/6844NI: SUS304/6844: Zinc-plated toggle side clamp 6844.

Starting from^∗ ：	188.19 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Quick Lock

NABEYA

Annoying thread feeding when clamping is not necessary. Quick action clamp which adopts a cam lock mechanism.

Starting from^∗ ：	330.81 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Toggle Down Clamp 6803

NABEYA

[Features]
· SS400 and galvanized toggle down clamp 6803.
· 6803S: Since it has a structure where it cannot be operated unless the safety lever is gripped, it prevents error operation and malfunction.

Starting from^∗ ：	99.55 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Low Edge Clamp (Double Sided Type)

NABEYA

It is a compact clamp that does not lift much. Ideal for machining thin, low-profile objects. There are three sizes of tightening bolts: M4, M6, and M12. It has a compact size and large stroke of 0.3 to 1.1. The guide groove of the main body shortens workpiece setup time (excluding LWC4). It has a structure that prevents chips from entering inside.

Starting from^∗ ：	35.73 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Swing Clamp Set S Type

NABEYA

An inexpensive, compact clamp. The free swivel makes it easy to attach and detach workpieces.

Starting from^∗ ：	83.64 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Toe Adjusting Clamp TCL Type

NABEYA

Tightening is performed while pressing the movable part downward, preventing the workpiece from lifting.

Starting from^∗ ：	311.67 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Toggle Side Clamp 6841

NABEYA

6841: SS400, 6841NI: SUS304/6841: Zinc-plated toggle side clamp 6841.

Starting from^∗ ：	129.93 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Low Edge Clamp (One Sided Type)

NABEYA

[Features]
· It is a compact clamp that does not lift much.
· Ideal for machining thin, low-profile objects.
· There are three sizes of tightening bolts: M4, M6, and M12.
· It has a compact size and large stroke of 0.3 to 1.1.
· The guide groove of the main body shortens workpiece setup time (excluding LWC4).
· It has a structure that prevents chips from entering inside.
· Ideal for small workpieces.
· Brass material is used to avoid scratching workpieces.
· Lifting up of the workpiece is minimal.
· Ideal for thin workpieces.

Starting from^∗ ：	21.85 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Adjusting Clamp

NABEYA

Standard T-slot bolted clamp.

Starting from^∗ ：	108.53 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Mag Side Stopper

NABEYA

A side stopper for use with magnetic chucks.

Starting from^∗ ：	147.62 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Magnetic Chucks Attachment Set

NABEYA

Metal fittings for fixing magnetic chucks to tables.

Starting from^∗ ：	130.56 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Arm Clamp

NABEYA

Forged S45C/hardened HRC45 arm clamp.

Starting from^∗ ：	73.36 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Quick Hold Down Clamp

NABEYA

Flat jaw and angled handle for quick hold down clamp (medium).

Starting from^∗ ：	330.25 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Bar for Quick Lock

NABEYA

[Features]
· Bar for Quick Lock.
· Annoying thread feeding when clamping is not necessary.
· A one-action clamp that adopts a cam lock mechanism

Starting from^∗ ：	53.81 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Check Plate for Quick Lock

NABEYA

Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.

Starting from^∗ ：	7.33 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Clamp Part of Wedge Clamp (for T-Shaped Grooves)

NABEYA

For the T-slot on the clamping part of the wedge clamp set. Compatible T-groove 14 mm to 22 mm, clamp stroke 6 mm. The workpiece contact surface is a flat type. The manufacturer also sells the clamp part only.

Starting from^∗ ：	195.85 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Wedge Clamp Set (for T-Shaped Grooves)

NABEYA

Wedge clamp set for T-grooves, flat type.

Starting from^∗ ：	320.13 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Swing Clamp Holder S Type

NABEYA

An inexpensive, compact clamp. The free swivel makes it easy to attach and detach workpieces.

Starting from^∗ ：	26.83 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Swing Clamp Height Adjusting Support

NABEYA

Of course, it can also be used for height adjustment in fixing workpieces. It can be used for both T-grooves and tap holes.

Starting from^∗ ：	102.02 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Toe Adjusting Clamp TCH Type

NABEYA

Tightening is performed while pressing the movable part downward, preventing the workpiece from lifting.

Starting from^∗ ：	312.30 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Base Unit 7110F

NABEYA

It is the base part of the Clamp Unit 7110 series. By combining various parts (spacers and supports), the height can be adjusted to suit the workpiece.

Starting from^∗ ：	548.14 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Base Unit 7110FA

NABEYA

It will be the base part of the Clamp Unit 7111 series. By combining various parts (spacers and supports), the height can be adjusted to suit the workpiece.

Starting from^∗ ：	1,019.75 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Hold Clamp, Stopper

NABEYA

Includes a hex wrench. Completely tightened with a sliding mechanism. Saves time thanks to its "one point" fitting and removal function. For machining the whole top surface of the workpiece and through-hole machining. Fully heat-treated for semi-permanent use. A workpiece rising prevention mechanism type.

Starting from^∗ ：	190.51 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Hold Clamp Set

NABEYA

Starting from^∗ ：	329.87 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Mini Low Height Clamp

NABEYA

With wrench operation from the side, the jaw is locked in the downward direction, and the workpiece does not rise up.

Starting from^∗ ：	198.36 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Universal Clamp

NABEYA

It can steplessly fasten tall and short workpieces.

Starting from^∗ ：	110.57 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Rubber Cap 6893

NABEYA

Dedicated clamping screw for toggle clamps.

Starting from^∗ ：	6.35 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Clamp Part of Wedge Clamp (for Tapped Holes)

NABEYA

The workpiece is prevented from rising up by being fastened downward. Ideal for machining through holes.

Starting from^∗ ：	125.60 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Side Clamp Jack

NABEYA

It serves as the base for clamping the side of large-scale processing machine workpieces. Compatible with workpiece contact side tapped hole M 20 / Table mounting side slotted hole structure allows fine adjustment

Starting from^∗ ：	150.00 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Side Jack B Type

NABEYA

[Features]
· Simply insert into the T-groove.
· Useful for receiving cutting resistance from the side.
· The tap hole opening is horizontal to the table. With stopper bolt.

Starting from^∗ ：	89.39 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Side Jack E Type

NABEYA

[Features]
· Simply insert into the T-groove.
· Useful for receiving cutting resistance from the side.
· Especially for large processing machines

Starting from^∗ ：	343.67 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Side Jack F Type

NABEYA

[Features]
· Simply insert into the T-groove.
· Useful for receiving cutting resistance from the side.
· Especially for large processing machines. Cutting resistance is received with greater strength by clamping the step part

Starting from^∗ ：	371.60 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Start Element 7110FT

NABEYA

S45C / quenched base unit low type (for T slot).

Starting from^∗ ：	339.86 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Double Swing Clamp Set S Type

NABEYA

This product can clamp 2 workpieces at the same time. It has a compact structure and can be used in small spaces. The freely rotatable structure saves time in loading and unloading workpieces.

Starting from^∗ ：	107.34 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Toe Adjusting Clamp

NABEYA

[Features]
· Tightening is performed while pressing the movable part downward, preventing the workpiece from lifting.
· Lifting prevention (generates force in the downward direction).
· Ideal for thin workpieces.
· Dovetail groove can withstand lateral force.
· Free Mounting Position

Starting from^∗ ：	427.55 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Toggle Down Clamp 6800

NABEYA

[Features]
· 6800: SS400/6800NI: SUS304, 6800: Zinc-plated toggle-down clamp 6800.
· 6800S: The structure prevents operation unless holding the safety lever, preventing erroneous operation and malfunction.

Starting from^∗ ：	72.64 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Hold Clamp, Clamp

NABEYA

Starting from^∗ ：	284.99 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days ：

		Promotional pricing
Brand	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA	NABEYA
Product Series	Swing Clamp S Type	Toggle Down Clamp 6830	Vacuum Chuck	Heavy Duty Toggle Side Clamp 6842PL	Toggle Hook Clamp 6848V	Toggle Down Clamp 6832	Nut Runner Clamp Large Model	Double Swing Clamp S Type	Toggle Side Clamp 6844	Quick Lock	Toggle Down Clamp 6803	Low Edge Clamp (Double Sided Type)	Swing Clamp Set S Type	Toe Adjusting Clamp TCL Type	Toggle Side Clamp 6841	Low Edge Clamp (One Sided Type)	Adjusting Clamp	Mag Side Stopper	Magnetic Chucks Attachment Set	Arm Clamp	Quick Hold Down Clamp	Bar for Quick Lock	Check Plate for Quick Lock	Clamp Part of Wedge Clamp (for T-Shaped Grooves)	Wedge Clamp Set (for T-Shaped Grooves)	Swing Clamp Holder S Type	Swing Clamp Height Adjusting Support	Toe Adjusting Clamp TCH Type	Base Unit 7110F	Base Unit 7110FA	Hold Clamp, Stopper	Hold Clamp Set	Mini Low Height Clamp	Universal Clamp	Rubber Cap 6893	Clamp Part of Wedge Clamp (for Tapped Holes)	Side Clamp Jack	Side Jack B Type	Side Jack E Type	Side Jack F Type	Start Element 7110FT	Double Swing Clamp Set S Type	Toe Adjusting Clamp	Toggle Down Clamp 6800	Hold Clamp, Clamp
Starting from^∗	60.88 € *Unit price with basic configuration	63.76 € Special price *Unit price with basic configuration Promotional pricing	2,454.42 € *Unit price with basic configuration	188.63 € *Unit price with basic configuration	108.98 € *Unit price with basic configuration	66.26 € *Unit price with basic configuration	659.44 € *Unit price with basic configuration	84.55 € *Unit price with basic configuration	188.19 € *Unit price with basic configuration	330.81 € *Unit price with basic configuration	99.55 € *Unit price with basic configuration	35.73 € *Unit price with basic configuration	83.64 € *Unit price with basic configuration	311.67 € *Unit price with basic configuration	129.93 € *Unit price with basic configuration	21.85 € *Unit price with basic configuration	108.53 € *Unit price with basic configuration	147.62 € *Unit price with basic configuration	130.56 € *Unit price with basic configuration	73.36 € *Unit price with basic configuration	330.25 € *Unit price with basic configuration	53.81 € *Unit price with basic configuration	7.33 € *Unit price with basic configuration	195.85 € *Unit price with basic configuration	320.13 € *Unit price with basic configuration	26.83 € *Unit price with basic configuration	102.02 € *Unit price with basic configuration	312.30 € *Unit price with basic configuration	548.14 € *Unit price with basic configuration	1,019.75 € *Unit price with basic configuration	190.51 € *Unit price with basic configuration	329.87 € *Unit price with basic configuration	198.36 € *Unit price with basic configuration	110.57 € *Unit price with basic configuration	6.35 € *Unit price with basic configuration	125.60 € *Unit price with basic configuration	150.00 € *Unit price with basic configuration	89.39 € *Unit price with basic configuration	343.67 € *Unit price with basic configuration	371.60 € *Unit price with basic configuration	339.86 € *Unit price with basic configuration	107.34 € *Unit price with basic configuration	427.55 € *Unit price with basic configuration	72.64 € *Unit price with basic configuration	284.99 € *Unit price with basic configuration
Min. Shipping Days ：	5 Days	Same day	7 Days	7 Days	5 Days	5 Days	7 Days	5 Days	7 Days	7 Days	5 Days	7 Days	5 Days	7 Days	5 Days	5 Days	5 Days	7 Days	7 Days	5 Days	5 Days	7 Days	7 Days	7 Days	5 Days	5 Days	5 Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	5 Days	5 Days	5 Days	7 Days	7 Days	7 Days	7 Days	7 Days	5 Days	7 Days	5 Days	7 Days