Rejestracja

Tłumaczymy nasz sklep na język polski!

Wymaga to jednak czasu, ponieważ w ofercie mamy dużo artykułów, a na nasz sklep składa się wiele stron. Chwilowo nasz katalog produktów dostępny będzie w języku angielskim. Dziękujemy za cierpliwość!
Warunki filtrowania

Wyczyść wszystko

  • Stan magazynowy
  • Tooth Type
  • Characteristics/Applications
  • Module
  • Length L(mm)
    [20–1980/1mm jedn.]
  • Material
  • Heat Treatment
  • Ground Tooth
  • Surface Treatment
  • Material Details
  • Length (nominal)
  • CAD
  • Rack Gears / Toothed Racks (Heat Treatment: Not Provided)

    At MISUMI, you will find highly configurable rack gears in many geometric designs that can be customized to your needs.
    Use our configurator to preselect your individual rack gear. Do you need help? Here you will find useful tutorials for using our configurator.

    In the MISUMI online shop you will find a variety of milled or ground rack gears for your rack drive, including helical, linear or round rack gears. In most cases, straight-toothed racks are used, but MISUMI also offers slanted-toothed racks.
    Rigid or flexible gear racks can be selected in the materials steel, stainless steel, brass, aluminum and plastic. The rack gears are burnished or chromated and protected against corrosion. Hardened rack gears are inductively hardened on the surface so that they are protected from wear and their durability is thereby increased. The module for the rack drive can be selected in 0.5 to 10. The rack is available in widths from 3 to 90 mm and in diameters from 8 to 50 mm. The racks can be configured in lengths from 45 mm to 4000 mm in 1 mm increments.

    The range of use of the rack and pinion gear is very far-reaching in mechanical engineering and plant engineering. These can convert simple rotational movements into linear movements, but can also serve as a rack drive in precise controls. Racks are often found in lifting tables and positioning stages.



    MISUMI offers you various helpful tools that can significantly shorten and simplify the design process.
    Here are some of the useful tools: 

    meviy

    Rapid-Design

    FRAMES

    Tech-Blog

    On-Demand manufacturing via CAD data uploadAdd-on for SOLIDWORKSSoftware for aluminum profile designInteresting articles

      • Rack gears / contact angle 20 degrees / dimension L configurable

          MISUMI

          Rack gears / contact angle 20 degrees / dimension L configurable

          Tooth TypeEnvironmentally friendlyShapeCharacteristics/ApplicationsModuleLength L(mm)MaterialHeat TreatmentGround Tooth
          StandardRoHS Compliant (10 Substances)Square RackCorrosion Resistant / Chemical Resistant ~ Not Applicable0.5 ~ 320 ~ 1980General Steel Material / Stainless Steel / Resin / BrassNot ProvidedNot Provided
          Standardowa data wysyłki:
          7 dni robocze
          Konfiguruj
        • Rack gears / contact angle 20 degrees / dimension L standard
          • Volume Discount

          MISUMI

          Rack gears / contact angle 20 degrees / dimension L standard

          Tooth TypeEnvironmentally friendlyShapeCharacteristics/ApplicationsModuleLength L(mm)MaterialHeat TreatmentGround Tooth
          StandardRoHS Compliant (10 Substances)Square RackCorrosion Resistant / Chemical Resistant ~ Not Applicable0.5 ~ 394.25 ~ 999.03General Steel Material / Stainless Steel / Resin / BrassNot ProvidedNot Provided
          Cena (bez VAT) od:
          7.34 €
          Standardowa data wysyłki:
          Towar dostępny w magazynie: 1 dzień roboczy
          Niektóre pozycje mogą zostać wysłane tego samego dnia
          Konfiguruj
        • Round racks / contact angle 20 degrees / dimension L Standard
          • Volume Discount

          MISUMI

          Round racks / contact angle 20 degrees / dimension L Standard

          Tooth TypeEnvironmentally friendlyShapeCharacteristics/ApplicationsModuleLength L(mm)MaterialHeat TreatmentGround Tooth
          Standard-Round Rack-0.5 ~ 350 ~ 499.51-Not ProvidedNot Provided
          Standardowa data wysyłki:
          7 dni robocze
          Konfiguruj
        • Rack gears / stainless steel / RK-SU
          • Volume Discount

          KYOUIKU GEAR MFG(KG)

          Rack gears / stainless steel / RK-SU

          Material is SUS304 for excellent corrosion resistance. Module 0.5 / 0.75 / 0.8 / 1.0 / 1.5 / 2.0. Angle dimensions can be selected from squares and rectangles. Mounting hole type, and both end surface processed type also available. Overall length 200 mm to 1,000 mm. SUS304 mating pinion also has a number of tooth number options to choose from.
          Czytaj dalej
          Tooth TypeEnvironmentally friendlyShapeCharacteristics/ApplicationsModuleLength L(mm)MaterialHeat TreatmentGround Tooth
          Standard-Square Rack-0.5 ~ 1.5202~205 ~ 1008.5Stainless SteelNot ProvidedNot Provided
          Cena (bez VAT) od:
          29.08 €
          Standardowa data wysyłki:
          6 dni robocze
          Konfiguruj
        • Rack gears / SR
          • Volume Discount

          KOHARA GEAR INDUSTRY

          Rack gears / SR

          [Additional machining possible]*Ohara gear (KHK) rack gear added to, MISUMI-VONA lineup.* In addition to specified size cuts, side and rear hole tapping, and side counterbore machining can be done.Please specify desired dimensions in specification / dimensions on the left.Note: Will be machined one end. Delivered without surface treatment applied to the cut end.[Features]Rack made from S45C, with rich selection of modules, lengths etc. at a reasonable price.
          Czytaj dalej
          Tooth TypeEnvironmentally friendlyShapeCharacteristics/ApplicationsModuleLength L(mm)MaterialHeat TreatmentGround Tooth
          Standard-Square Rack-0.5 ~ 1098 ~ 505General Steel MaterialNot ProvidedNot Provided
          Cena (bez VAT) od:
          12.04 €
          Standardowa data wysyłki:
          Towar dostępny w magazynie: 1 dzień roboczy
          Niektóre pozycje mogą zostać wysłane tego samego dnia
          Konfiguruj
        • Rack gears / CP / RKP-B
          • ZNIŻKA
          • Volume Discount

          KYOUIKU GEAR MFG(KG)

          Rack gears / CP / RKP-B

          CP2.0 CP rack. With the integer tooth pitch, calculating travel distance is easy. Material C3604B.
          Czytaj dalej
          Tooth TypeEnvironmentally friendlyShapeCharacteristics/ApplicationsModuleLength L(mm)MaterialHeat TreatmentGround Tooth
          Standard-Square Rack-0.6366200 ~ 500BrassNot ProvidedNot Provided
          Cena (bez VAT) od:
          15.60 €
          Cena specjalna
          Standardowa data wysyłki:
          Towar dostępny w magazynie: 1 dzień roboczy
          Niektóre pozycje mogą zostać wysłane tego samego dnia
          Konfiguruj
        • Rack gears / steel / RK-SD
          • ZNIŻKA
          • Volume Discount

          KYOUIKU GEAR MFG(KG)

          Rack gears / steel / RK-SD

          Rack gear made of S45C. Module 1.0/1.25/1.5/2.0/2.5/3.0/4.0/5.0. Angle dimensions can be selected from squares and rectangles. Mounting hole type, and both end surface processed type also available. Overall length 300 mm to 1,600 mm.
          Czytaj dalej
          Tooth TypeEnvironmentally friendlyShapeCharacteristics/ApplicationsModuleLength L(mm)MaterialHeat TreatmentGround Tooth
          Standard-Square Rack-1 ~ 3303~306 ~ 1602.2General Steel MaterialNot ProvidedNot Provided
          Cena (bez VAT) od:
          23.97 €
          Cena specjalna
          Standardowa data wysyłki:
          Towar dostępny w magazynie: 1 dzień roboczy
          Niektóre pozycje mogą zostać wysłane tego samego dnia
          Konfiguruj
        • Helical Rack Gears - L Fixed

            MISUMI

            Helical Rack Gears - L Fixed

            Features: Helical rack gears have a higher contact ratio than straight rack gears, resulting in superior transmission accuracy and quieter operation.The 19° 31' 42" helical angle has a CP (circular pitch) front surface pitch, which makes it easy to design and position.The helical rack gear is becoming the world standard in helical angles, mainly in Europe.
            Czytaj dalej
            Tooth TypeEnvironmentally friendlyShapeCharacteristics/ApplicationsModuleLength L(mm)MaterialHeat TreatmentGround Tooth
            HelicalRoHS Compliant (10 Substances)Square RackNot Applicable1 ~ 3100 ~ 1000General Steel MaterialNot ProvidedNot Provided
            Cena (bez VAT) od:
            50.60 €
            Standardowa data wysyłki:
            7 dni robocze
            Konfiguruj
          • Round racks / stainless steel
            • Volume Discount

            KOHARA GEAR INDUSTRY

            Round racks / stainless steel

            Stainless steel round processed rack with outer diameter tolerance h9. Use for rust-intolerant machinery.
            Czytaj dalej
            Tooth TypeEnvironmentally friendlyShapeCharacteristics/ApplicationsModuleLength L(mm)MaterialHeat TreatmentGround Tooth
            Standard-Round Rack-1 ~ 3505 ~ 1010Stainless SteelNot ProvidedNot Provided
            Cena (bez VAT) od:
            105.00 €
            Standardowa data wysyłki:
            6 dni robocze
            Konfiguruj
          • Rack gears / RK-B
            • ZNIŻKA
            • Volume Discount

            KYOUIKU GEAR MFG(KG)

            Rack gears / RK-B

            Small module rack gear for module 0.3 /0.5 / 0.75 / 0.8. Angle dimensions can be selected from squares and rectangles. Overall length 200 mm to 500 mm. Material C3604B.
            Czytaj dalej
            Tooth TypeEnvironmentally friendlyShapeCharacteristics/ApplicationsModuleLength L(mm)MaterialHeat TreatmentGround Tooth
            Standard-Square Rack-0.3 ~ 0.8200 ~ 505BrassNot ProvidedNot Provided
            Cena (bez VAT) od:
            14.18 €
            Cena specjalna
            Standardowa data wysyłki:
            Towar dostępny w magazynie: 1 dzień roboczy
            Niektóre pozycje mogą zostać wysłane tego samego dnia
            Konfiguruj
          • Molded Flexible Rack
            • Volume Discount

            KOHARA GEAR INDUSTRY

            Molded Flexible Rack

            Molded flexible rack made by extrusion molding of Duracon®, that can be freely shaped.Duracon® is a registered trademark of Polyplastics Co., Ltd. in Japan and other countries.
            Czytaj dalej
            Tooth TypeEnvironmentally friendlyShapeCharacteristics/ApplicationsModuleLength L(mm)MaterialHeat TreatmentGround Tooth
            Standard-Flexible Rack-0.8 ~ 22000ResinNot ProvidedNot Provided
            Cena (bez VAT) od:
            36.96 €
            Standardowa data wysyłki:
            Towar dostępny w magazynie: 1 dzień roboczy
            Niektóre pozycje mogą zostać wysłane tego samego dnia
            Konfiguruj
          • Round racks with handle (ORK-SU)
            • ZNIŻKA
            • Volume Discount

            KYOUIKU GEAR MFG(KG)

            Round racks with handle (ORK-SU)

            Material is SUS304 for excellent corrosion resistance.As the shaft outer diameter is ground, the shaft diameter tolerance is h7, with good surface roughness of the shaft outer diameter, contributing to longer life of the sliding part compared with the cut processed part.
            Czytaj dalej
            Tooth TypeEnvironmentally friendlyShapeCharacteristics/ApplicationsModuleLength L(mm)MaterialHeat TreatmentGround Tooth
            Standard-Round Rack-0.5 ~ 1200 ~ 300Stainless SteelNot ProvidedNot Provided
            Cena (bez VAT) od:
            89.54 €
            Cena specjalna
            Standardowa data wysyłki:
            Towar dostępny w magazynie: 1 dzień roboczy
            Niektóre pozycje mogą zostać wysłane tego samego dnia
            Konfiguruj
          • Helical Rack Gears - L Configurable (One End Machined)

              MISUMI

              Helical Rack Gears - L Configurable (One End Machined)

              Features: Helical rack gears have a higher contact ratio than straight rack gears, resulting in superior transmission accuracy and quieter operation.The 19° 31' 42" helical angle has a CP (circular pitch) front surface pitch, which makes it easy to design and position.The helical rack gear is becoming the world standard in helical angles, mainly in Europe.
              Czytaj dalej
              Tooth TypeEnvironmentally friendlyShapeCharacteristics/ApplicationsModuleLength L(mm)MaterialHeat TreatmentGround Tooth
              HelicalRoHS Compliant (10 Substances)Square RackNot Applicable1 ~ 320 ~ 980General Steel MaterialNot ProvidedNot Provided
              Standardowa data wysyłki:
              7 dni robocze
              Konfiguruj
            • Rack gears / CP
              • Volume Discount

              KOHARA GEAR INDUSTRY

              Rack gears / CP

              CP rack with 1 pinion rotation movement amount in integer length.
              Czytaj dalej
              Tooth TypeEnvironmentally friendlyShapeCharacteristics/ApplicationsModuleLength L(mm)MaterialHeat TreatmentGround Tooth
              Standard-Square Rack-0.7958 ~ 6.366298 ~ 2050General Steel MaterialNot ProvidedNot Provided
              Cena (bez VAT) od:
              14.60 €
              Standardowa data wysyłki:
              Towar dostępny w magazynie: 1 dzień roboczy
              Niektóre pozycje mogą zostać wysłane tego samego dnia
              Konfiguruj
            • Rack gears with machined fixing bore SRF
              • Volume Discount

              KOHARA GEAR INDUSTRY

              Rack gears with machined fixing bore SRF

              Both end machined rack with mount hole processing, saving the labor of additional work, at a reasonable price. Low price and usability, allowing connection of as many as needed.
              Czytaj dalej
              Tooth TypeEnvironmentally friendlyShapeCharacteristics/ApplicationsModuleLength L(mm)MaterialHeat TreatmentGround Tooth
              Standard-Square Rack-0.5 ~ 6298.45 ~ 2049.88General Steel MaterialNot ProvidedNot Provided
              Cena (bez VAT) od:
              81.75 €
              Standardowa data wysyłki:
              Towar dostępny w magazynie: 1 dzień roboczy
              Niektóre pozycje mogą zostać wysłane tego samego dnia
              Konfiguruj
            • Rack gears / round / CP

                KOHARA GEAR INDUSTRY

                Rack gears / round / CP

                CP round processed rack with outer diameter tolerance h9, S45C made. Convenient in applications when the rack needs to be used in reciprocal motion.
                Czytaj dalej
                Tooth TypeEnvironmentally friendlyShapeCharacteristics/ApplicationsModuleLength L(mm)MaterialHeat TreatmentGround Tooth
                Standard-Round Rack-0.7958 ~ 3.1831505 ~ 1010General Steel MaterialNot ProvidedNot Provided
                Cena (bez VAT) od:
                83.33 €
                Standardowa data wysyłki:
                7 dni robocze
                Konfiguruj
              • Rack gears / platic / DRF / DRFD / DRFK
                • Volume Discount

                KOHARA GEAR INDUSTRY

                Rack gears / platic / DRF / DRFD / DRFK

                [Features]· Plastic rack with less water absorption and smaller dimensional change than MC nylon.
                Czytaj dalej
                Tooth TypeEnvironmentally friendlyShapeCharacteristics/ApplicationsModuleLength L(mm)MaterialHeat TreatmentGround Tooth
                Standard-Square Rack-1 ~ 3499.51 ~ 1005.31ResinNot ProvidedNot Provided
                Cena (bez VAT) od:
                95.47 €
                Standardowa data wysyłki:
                Towar dostępny w magazynie: 1 dzień roboczy
                Niektóre pozycje mogą zostać wysłane tego samego dnia
                Konfiguruj
              • Rack gears / both ends machined / KF
                • ZNIŻKA
                • Volume Discount

                KATAYAMA CHAIN

                Rack gears / both ends machined / KF

                K standard rack gear with a wide range of modules and lengths. S45C made with black dye treatment. A precision rack gear.
                Czytaj dalej
                Tooth TypeEnvironmentally friendlyShapeCharacteristics/ApplicationsModuleLength L(mm)MaterialHeat TreatmentGround Tooth
                Standard-Square Rack-1 ~ 6499.51 ~ 2049.89General Steel MaterialNot ProvidedNot Provided
                Cena (bez VAT) od:
                38.45 €
                Cena specjalna
                Standardowa data wysyłki:
                Towar dostępny w magazynie: 1 dzień roboczy
                Niektóre pozycje mogą zostać wysłane tego samego dnia
                Konfiguruj
              • Rack gears / helical
                • Volume Discount

                KOHARA GEAR INDUSTRY

                Rack gears / helical

                Helical rack with a high contact gear ratio, and is effective for noise and vibration control. Both end face and mount hole processed type also available.
                Czytaj dalej
                Tooth TypeEnvironmentally friendlyShapeCharacteristics/ApplicationsModuleLength L(mm)MaterialHeat TreatmentGround Tooth
                Helical-Square Rack-2 ~ 395 ~ 995.24General Steel MaterialNot ProvidedNot Provided
                Cena (bez VAT) od:
                26.17 €
                Standardowa data wysyłki:
                Towar dostępny w magazynie: 1 dzień roboczy
                Niektóre pozycje mogą zostać wysłane tego samego dnia
                Konfiguruj
              • Double sided machined rack gears / SRF
                • Volume Discount
                • Stock

                KOHARA GEAR INDUSTRY

                Double sided machined rack gears / SRF

                Both ends machined rack, with rich selection of modules, lengths, etc. Low price and usability, allowing connection of as many as needed.
                Czytaj dalej
                Tooth TypeEnvironmentally friendlyShapeCharacteristics/ApplicationsModuleLength L(mm)MaterialHeat TreatmentGround Tooth
                Standard-Square Rack-0.5 ~ 10298.45 ~ 2049.88General Steel MaterialNot ProvidedNot Provided
                Cena (bez VAT) od:
                42.53 €
                Standardowa data wysyłki:
                6 dni robocze
                Konfiguruj
              • Rack gears / BSR
                • Volume Discount

                KOHARA GEAR INDUSTRY

                Rack gears / BSR

                Fine pitch rack made from rust resistant brass (C3604) with excellent workability. BSS Use together with gear.
                Czytaj dalej
                Tooth TypeEnvironmentally friendlyShapeCharacteristics/ApplicationsModuleLength L(mm)MaterialHeat TreatmentGround Tooth
                Standard-Square Rack-0.5 ~ 1303BrassNot ProvidedNot Provided
                Cena (bez VAT) od:
                25.82 €
                Standardowa data wysyłki:
                6 dni robocze
                Konfiguruj
              • CP Metal Flexible Rack

                  KOHARA GEAR INDUSTRY

                  CP Metal Flexible Rack

                  Machined CP metal flexible rack made of SS400. Continuous length product with total length up to 4000 mm available. Can bend to an arc to some degree to suit base.
                  Czytaj dalej
                  Tooth TypeEnvironmentally friendlyShapeCharacteristics/ApplicationsModuleLength L(mm)MaterialHeat TreatmentGround Tooth
                  Standard-Flexible Rack-1.59152000 ~ 3000General Steel MaterialNot ProvidedNot Provided
                  Cena (bez VAT) od:
                  176.49 €
                  Standardowa data wysyłki:
                  7 dni robocze
                  Konfiguruj
                • Rack gears / plastic
                  • Volume Discount

                  KOHARA GEAR INDUSTRY

                  Rack gears / plastic

                  MC Nylon material is used, so lightweight and can be used without lubrication. Ideal for clean rooms and equipment adverse to lubricating oil.
                  Czytaj dalej
                  Tooth TypeEnvironmentally friendlyShapeCharacteristics/ApplicationsModuleLength L(mm)MaterialHeat TreatmentGround Tooth
                  Standard-Square Rack-1 ~ 3505 ~ 1005.31ResinNot ProvidedNot Provided
                  Cena (bez VAT) od:
                  94.12 €
                  Standardowa data wysyłki:
                  6 dni robocze
                  Konfiguruj
                • Rack gears / Tapered / CP

                    KOHARA GEAR INDUSTRY

                    Rack gears / Tapered / CP

                    CP tapered rack with tooth face processed into a tapered shape, combining CP tapered spur gear and backlash adjustment.
                    Czytaj dalej
                    Tooth TypeEnvironmentally friendlyShapeCharacteristics/ApplicationsModuleLength L(mm)MaterialHeat TreatmentGround Tooth
                    Standard-Tapered Racks-1.5915 ~ 3.18311000General Steel MaterialNot ProvidedNot Provided
                    Cena (bez VAT) od:
                    180.17 €
                    Standardowa data wysyłki:
                    7 dni robocze
                    Konfiguruj
                  • Rack gears / steel / CP / RKP-SD

                      KYOUIKU GEAR MFG(KG)

                      Rack gears / steel / CP / RKP-SD

                      CP5.0/10.0 CP rack. With the integer tooth pitch, calculating travel distance is easy. Material S45C.
                      Czytaj dalej
                      Tooth TypeEnvironmentally friendlyShapeCharacteristics/ApplicationsModuleLength L(mm)MaterialHeat TreatmentGround Tooth
                      Standard-Square Rack-1.5915 ~ 3.1831503~506 ~ 1000General Steel MaterialNot ProvidedNot Provided
                      Cena (bez VAT) od:
                      58.12 €
                      Standardowa data wysyłki:
                      6 dni robocze
                      Konfiguruj
                    • Round racks
                      • Volume Discount

                      KOHARA GEAR INDUSTRY

                      Round racks

                      Round processed rack with outer diameter tolerance h9, S45C made. Convenient in applications when the rack needs to be used in reciprocal motion. S series with easy to machine shaft part also available.
                      Czytaj dalej
                      Tooth TypeEnvironmentally friendlyShapeCharacteristics/ApplicationsModuleLength L(mm)MaterialHeat TreatmentGround Tooth
                      Standard-Round Rack-1 ~ 5505 ~ 1010General Steel MaterialNot ProvidedNot Provided
                      Cena (bez VAT) od:
                      79.46 €
                      Standardowa data wysyłki:
                      Towar dostępny w magazynie: 1 dzień roboczy
                      Niektóre pozycje mogą zostać wysłane tego samego dnia
                      Konfiguruj
                    • [Full Length Specified] Brass Rack BSR

                        KOHARA GEAR INDUSTRY

                        [Full Length Specified] Brass Rack BSR

                        [Additional machining possible]*Ohara gear (KHK) rack gear added to, MISUMI-VONA lineup.* Please specify desired dimensions in specification / dimensions on the left.* Will be machined one end. Delivered without surface treatment applied to the cut end.[Features]Fine pitch rack made from rust resistant brass (C3604) with excellent workability. BSS Use together with gear.
                        Czytaj dalej
                        Tooth TypeEnvironmentally friendlyShapeCharacteristics/ApplicationsModuleLength L(mm)MaterialHeat TreatmentGround Tooth
                        Standard-Square Rack-0.8 ~ 120 ~ 303BrassNot ProvidedNot Provided
                        Standardowa data wysyłki:
                        14 dni robocze
                        Konfiguruj
                      • Helical Rack Gears - Assembly Gauge

                          MISUMI

                          Helical Rack Gears - Assembly Gauge

                          Features: Assembly gauge for connecting helical rack gears. MISUMI helical rack gears are right-twisted, so a left-twisted assembly gauge is required to connect them.
                          Czytaj dalej
                          Tooth TypeEnvironmentally friendlyShapeCharacteristics/ApplicationsModuleLength L(mm)MaterialHeat TreatmentGround Tooth
                          HelicalRoHS Compliant (10 Substances)Square RackNot Applicable1 ~ 3100General Steel MaterialNot ProvidedNot Provided
                          Cena (bez VAT) od:
                          43.83 €
                          Standardowa data wysyłki:
                          7 dni robocze
                          Konfiguruj
                        • Rack gears /KCPF / (with both ends already finished)
                          • Volume Discount

                          KATAYAMA CHAIN

                          Rack gears /KCPF / (with both ends already finished)

                          K standard rack gear with a wide range of circular pitches and lengths. S45C made with black dye treatment. A precision rack gear.
                          Czytaj dalej
                          Tooth TypeEnvironmentally friendlyShapeCharacteristics/ApplicationsModuleLength L(mm)MaterialHeat TreatmentGround Tooth
                          Standard-Square Rack-1.59151500 ~ 2050General Steel MaterialNot ProvidedNot Provided
                          Cena (bez VAT) od:
                          130.27 €
                          Standardowa data wysyłki:
                          8 dni robocze
                          Konfiguruj
                        • Double sided machined rack gears / SRAF
                          • Volume Discount

                          KOHARA GEAR INDUSTRY

                          Double sided machined rack gears / SRAF

                          Compared with conventional SRF rack, low cost and compact square-shaped product with the same tooth width and height. Any number of pieces can be added by processing both ends.
                          Czytaj dalej
                          Tooth TypeEnvironmentally friendlyShapeCharacteristics/ApplicationsModuleLength L(mm)MaterialHeat TreatmentGround Tooth
                          Standard-Square Rack-1.5 ~ 4999.03 ~ 1005.31General Steel MaterialNot ProvidedNot Provided
                          Cena (bez VAT) od:
                          85.14 €
                          Standardowa data wysyłki:
                          7 dni robocze
                          Konfiguruj
                        • Rack gears with machined mounting hole SRAF
                          • Volume Discount

                          KOHARA GEAR INDUSTRY

                          Rack gears with machined mounting hole SRAF

                          European size SRAF rack added to full lineup of J-series.
                          Czytaj dalej
                          Tooth TypeEnvironmentally friendlyShapeCharacteristics/ApplicationsModuleLength L(mm)MaterialHeat TreatmentGround Tooth
                          Standard-Square Rack-1.5 ~ 4999.03 ~ 1005.31General Steel MaterialNot ProvidedNot Provided
                          Cena (bez VAT) od:
                          92.18 €
                          Standardowa data wysyłki:
                          9 dni robocze
                          Konfiguruj
                        • Rack mounting hole bar / CP
                          • Volume Discount

                          KOHARA GEAR INDUSTRY

                          Rack mounting hole bar / CP

                          CP rack with bolt holes machined with full line-up.
                          Czytaj dalej
                          Tooth TypeEnvironmentally friendlyShapeCharacteristics/ApplicationsModuleLength L(mm)MaterialHeat TreatmentGround Tooth
                          Standard-Square Rack-0.7958 ~ 6.3662500 ~ 2050General Steel MaterialNot ProvidedNot Provided
                          Cena (bez VAT) od:
                          93.87 €
                          Standardowa data wysyłki:
                          6 dni robocze
                          Konfiguruj
                        • [All Length / Bolt Hole Specifiable] Plastic Rack PR

                            KOHARA GEAR INDUSTRY

                            [All Length / Bolt Hole Specifiable] Plastic Rack PR

                            [Additional machining possible]*Ohara gear (KHK) rack gear added to, MISUMI-VONA lineup.* In addition to specified size cuts, side and rear hole tapping, and side counterbore machining can be done.* Please specify desired dimensions in specification / dimensions on the left.* Will be machined one end. Delivered without surface treatment applied to the cut end.[Features]· MC Nylon material is used, so lightweight and can be used without lubrication. Ideal for clean rooms and equipment adverse to lubricating oil.
                            Czytaj dalej
                            Tooth TypeEnvironmentally friendlyShapeCharacteristics/ApplicationsModuleLength L(mm)MaterialHeat TreatmentGround Tooth
                            Standard-Square Rack-120 ~ 505ResinNot ProvidedNot Provided
                            Standardowa data wysyłki:
                            14 dni robocze
                            Konfiguruj