THK Rod End Bearings, Spherical Bearings（Connection screw M：M8）

The holder is perpendicular to the ball shank.With grease pockets on the top and bottom of the spherical area, this model has high lubricity and high wear resistance.

This model is a highly rigid rod end that is basically the same as the female threaded model PHS, but has a male thread on the holder end.* The rod end shown in the photo is a representative product.Thread sizes M5 and M6 do not come with a nipple. Lubricate the bearing directly.

Highly rigid with superior abrasion and corrosion resistance.The correct amount of lubricant can be supplied to the sliding surface via the grease nipple attached to the holder.[Features]· Lubrication: Lubricate before use. There is a lubrication hole and oil groove on the holder, so it can be lubricated via the grease nipple.· Left-hand female thread identification: For left-hand female threads, the letter "L" is added. "L" is marked on the holder of the product.

This model is an oil free type rod end that is basically the same as the female threaded model NHS-T, but has a male thread on the holder end.

The mounting bolt and holder are arranged on the same axis, allowing this model to bear an axial load.The boot contains grease, providing high lubricity and high abrasion resistance.

An oil free type rod end that uses self-lubricating synthetic plastic formed between the steel holder and the spherical inner ring.The gap on the sliding surface is minimized, allowing accurate link motion to be achieved.[Features]· NHS-T Type (oil free type)