Rejestracja

Tłumaczymy nasz sklep na język polski!

Wymaga to jednak czasu, ponieważ w ofercie mamy dużo artykułów, a na nasz sklep składa się wiele stron. Chwilowo nasz katalog produktów dostępny będzie w języku angielskim. Dziękujemy za cierpliwość!
Warunki filtrowania

Wyczyść wszystko

  • Hole diameter (drill diameter) D(mm)
  • Groove Length L(mm)
  • work material
  • Tool Material Type
  • Shank Type
  • Coating Y/N
  • Producent

MISUMI Straight Shank / End Mill Shank Drills (Carbide)(work material:Cast Iron)

  • TiAlN Coated Carbide Small-Diameter Drill, 0.01 mm / 0.05 mm Unit Diameter Designation Model
    • Volume Discount

    MISUMI

    TiAlN Coated Carbide Small-Diameter Drill, 0.01 mm / 0.05 mm Unit Diameter Designation Model

    [Features] -Ideal for high-precision small-diameter drilling-The shank diameter is standardised at 3 mm and enables high-precision clamping-The combination of super-fine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining.
    Czytaj dalej
    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
    0.38 ~ 2.76 ~ 12Cast Iron[○]Carbide38End Mill ShankAvailableTiAlNN/A
    Cena (bez VAT) od:
    36.61 €
    Cena zawiera VAT:
    43.57 €
    Standardowa data wysyłki:
    5 dni robocze
    Konfiguruj
  • Carbide Burnishing Drill, Straight Model

      MISUMI

      Carbide Burnishing Drill, Straight Model

      [Features] -Enables high-precision drilling of aluminium without pre-drilling-Tip diameter can be specified in units of 0.01mm and flute length in units of 0.1mm.
      Czytaj dalej
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      00Cast Iron[○]Carbide40 ~ 60End Mill ShankN/A-N/A
      Standardowa data wysyłki:
      8 dni robocze
      Konfiguruj
    • TiAlN Coated Carbide Drill for Cast Iron Machining, 3-Flute / Regular
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide Drill for Cast Iron Machining, 3-Flute / Regular

      [Features] -Due to its special shape, it has excellent cutting performance even in non-ferrous metals such as grey cast iron, ductile iron, aluminium alloys, brass and magnesium-Due to the spiral tip shape of the pointed bit part, drilling without centring is possible-Wide flute design promotes chip flow.
      Czytaj dalej
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      5 ~ 1244 ~ 71Cast Iron[◎]Carbide82 ~ 118End Mill ShankAvailableTiAlNN/A
      Cena (bez VAT) od:
      70.12 €
      Cena zawiera VAT:
      83.44 €
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • Carbide Drill, Straight Shank / Regular
      • Volume Discount

      MISUMI

      Carbide Drill, Straight Shank / Regular

      [Features] -Multi-faceted uncoated carbide drill bit for a variety of applications-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.
      Czytaj dalej
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      1 ~ 7.512 ~ 69Cast Iron[○]Carbide34 ~ 109Straight ShankN/A-N/A
      Cena (bez VAT) od:
      12.59 €
      Cena zawiera VAT:
      14.98 €
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Regular
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Regular

      [Features] -Capable of high feed and high speed cutting from general steel to stainless steel-The adoption of a wavy edge achieves outstanding sharpness and strength and promotes chip evacuation-. High-speed cutting is achieved by maintaining outstanding strength and stability through the adoption of a tapered shape and R-type thinning-Suppresses chipping through the adoption of a bevel-edge treatment on the shoulder-Through the adoption of a diameter-plus tolerance, it is effective for high-precision hole machining closer to hole tolerance
      Czytaj dalej
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      3 ~ 1328 ~ 77Cast Iron[○]Carbide66 ~ 124End Mill ShankAvailableTiAlNN/A
      Cena (bez VAT) od:
      47.83 €
      Cena zawiera VAT:
      56.92 €
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Straight Shank / Stub, Regular Model
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Straight Shank / Stub, Regular Model

      [Features] -Capable of high feed and high speed cutting from general steel to stainless steel-Adopting a fluted cutting edge achieves outstanding sharpness and strength and promotes chip evacuation-. High-speed cutting is achieved by maintaining outstanding strength and stability through the adoption of a tapered shape + R-type thinning-Suppresses chipping through the adoption of a bevel-edge treatment on the shoulder-Through the adoption of a diameter-plus tolerance, it is effective for high-precision hole machining closer to hole tolerance
      Czytaj dalej
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      3 ~ 1316 ~ 78Cast Iron[○]Carbide46 ~ 137Straight ShankAvailableTiAlNN/A
      Cena (bez VAT) od:
      36.40 €
      Cena zawiera VAT:
      43.32 €
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • TiAlN Coated Carbide Drill, Stub
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide Drill, Stub

      [Features] -Designed with small core diameter to improve chip evacuation-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
      Czytaj dalej
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      0.3 ~ 62 ~ 28Cast Iron[○]Carbide38 ~ 66End Mill ShankAvailableTiAlNN/A
      Cena (bez VAT) od:
      23.28 €
      Cena zawiera VAT:
      27.70 €
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • TiAlN Coated Carbide Drill, Regular Model with Oil Holes
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide Drill, Regular Model with Oil Holes

      [Features] -Internal lubrication efficiently evacuates chips and improves tool life-Supports a wide range of materials, from general steel to stainless steel-Achieves excellent strength by adopting a straight cutting edge-Demonstrates high centripetal force by using three chip and X-type thinning-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining.
      Czytaj dalej
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      3 ~ 1328 ~ 77Cast Iron[○]Carbide66 ~ 124End Mill ShankAvailableTiAlNAvailable
      Cena (bez VAT) od:
      79.21 €
      Cena zawiera VAT:
      94.26 €
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • TiAlN Coated Carbide Drill, Straight Shank / Stub Model
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide Drill, Straight Shank / Stub Model

      [Features] -Multi-faceted carbide drill for a wide range of applications-TiAlN coating enables high-speed cutting-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the drill, its performance, pricing, etc.
      Czytaj dalej
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      1 ~ 86 ~ 37Cast Iron[○]Carbide26 ~ 79Straight ShankAvailableTiAlNN/A
      Cena (bez VAT) od:
      20.63 €
      Cena zawiera VAT:
      24.55 €
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • Carbide Drill, Straight Shank / Stub
      • Volume Discount

      MISUMI

      Carbide Drill, Straight Shank / Stub

      [Features] -Multi-faceted uncoated carbide drill bit for a wide range of applications-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.
      Czytaj dalej
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      0.5 ~ 83 ~ 37Cast Iron[○]Carbide20 ~ 79Straight ShankN/A-N/A
      Cena (bez VAT) od:
      11.04 €
      Cena zawiera VAT:
      13.14 €
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • TS Coated Carbide Composite Spiral Drill, Stub Model
      • Volume Discount

      MISUMI

      TS Coated Carbide Composite Spiral Drill, Stub Model

      [Features] -Designed with a 30° helix angle near the tip and 20° near the shank-The 20° section has a large core diameter for improved tool durability-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, delivery times, etc.
      Czytaj dalej
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      3 ~ 1220 ~ 55Cast Iron[○]Carbide50 ~ 115End Mill ShankAvailable-N/A
      Cena (bez VAT) od:
      100.34 €
      Cena zawiera VAT:
      119.40 €
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • TiAlN Coated Carbide Burnishing Bladed Drill, Stub (No Oil Holes), Regular (with Oil Holes)
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide Burnishing Bladed Drill, Stub (No Oil Holes), Regular (with Oil Holes)

      [Features] -Providing an edge with smoothing groove on the outer circumference, it is possible to perform hole drilling and hole finishing simultaneously-Supports a wide range of materials, from general steel to stainless steel-Internal lubricant supply efficiently removes chips and improves tool life (TAC-HBNESDR)-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Czytaj dalej
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      3 ~ 1320 ~ 71Cast Iron[○]Carbide62 ~ 124End Mill ShankAvailableTiAlNAvailable / N/A
      Cena (bez VAT) od:
      55.49 €
      Cena zawiera VAT:
      66.03 €
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • TiAlN Coated Carbide 3-Flute Drill, Stub Model, Regular
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide 3-Flute Drill, Stub Model, Regular

      3-flute drill with outstanding afferent * If the chip flow is not good, perform the appropriate step process depending on the chip flow condition
      Czytaj dalej
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      2 ~ 1312 ~ 77Cast Iron[○]Carbide46 ~ 124End Mill ShankAvailableTiAlNN/A
      Cena (bez VAT) od:
      60.30 €
      Cena zawiera VAT:
      71.76 €
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • TiAlN Coated Carbide Double Margin Drill, Regular
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide Double Margin Drill, Regular

      [Features] -Providing 4 edges on the outer circumference of the drill improves guiding performance during chamfering and penetration, enabling very straight and stable drilling-Supports a wide range of materials, from general steel to stainless steel-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
      Czytaj dalej
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      1 ~ 1112 ~ 71Cast Iron[○]Carbide45 ~ 118End Mill ShankAvailableTiAlNN/A
      Cena (bez VAT) od:
      81.68 €
      Cena zawiera VAT:
      97.20 €
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Stub
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Stub

      [Features] -The wavy cutting edge achieves excellent sharpness and strength and promotes chip evacuation-The use of triple rake and R-type thinning achieves high centripetal force-Designed with larger core diameter than TAC-ESDBA to improve durability-Can be reground. Please refer to the "Regrinding Service" page for details on how to proceed, what services you can avail of, prices, etc.
      Czytaj dalej
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      3 ~ 1320 ~ 60Cast Iron[○]Carbide66 ~ 107End Mill ShankAvailableTiAlNN/A
      Cena (bez VAT) od:
      43.35 €
      Cena zawiera VAT:
      51.59 €
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Regular
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Regular

      By applying three rake + R thinning, it demonstrates a high level of afferent.
      Czytaj dalej
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      3 ~ 1328 ~ 77Cast Iron[○]Carbide66 ~ 124End Mill ShankAvailableTiAlNN/A
      Cena (bez VAT) od:
      51.31 €
      Cena zawiera VAT:
      61.06 €
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • TiAlN Coated Carbide Drill with Corner Radius, Straight Shank / Stub Model, Regular
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide Drill with Corner Radius, Straight Shank / Stub Model, Regular

      [Features] -Corner radius treatment suppresses chipping-Wavy flute shape achieves excellent cutting sharpness and strength and promotes chip flow-High centripetal force is achieved by using three chip and R thinning-Combination of ultra-fine grain carbide alloy + TiAlN coating provides excellent abrasion resistance and enables high speed machining-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.
      Czytaj dalej
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      3 ~ 1316 ~ 77Cast Iron[○]Carbide49 ~ 124Straight ShankAvailableTiAlNN/A
      Cena (bez VAT) od:
      40.76 €
      Cena zawiera VAT:
      48.50 €
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Stub
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Stub

      [Features] -Capable of high feed and high speed cutting from general steel to stainless steel-The adoption of a corrugated cutting edge achieves excellent sharpness and strength and promotes chip evacuation-. High-speed cutting is achieved by maintaining outstanding strength and stability through the adoption of a tapered shape + R-type thinning-Suppresses chipping through the adoption of a bevel edge treatment on the shoulder-Through the adoption of a diameter-plus tolerance, it is effective for high-precision hole machining closer to hole tolerance
      Czytaj dalej
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      3 ~ 820 ~ 41Cast Iron[○]Carbide62 ~ 79End Mill ShankAvailableTiAlNN/A
      Cena (bez VAT) od:
      40.39 €
      Cena zawiera VAT:
      48.06 €
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • TiAlN Coated Carbide High-Speed High-Feed Machining Drill, With Oil Holes / Stub, Regular
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide High-Speed High-Feed Machining Drill, With Oil Holes / Stub, Regular

      [Features] -Internal lubrication efficiently evacuates chips and improves tool life-Capable of high feed and high speed cutting from general steel to stainless steel-Adopting a corrugated cutting edge achieves excellent sharpness and strength, and promotes chip evacuation-High-speed cutting is achieved by maintaining excellent strength and stability by adopting tapered shape and R-type thinning-Suppresses chipping by adopting chamfer treatment on the shoulder-By adopting diameter plus tolerance, it is effective for high-precision finishing of holes closer to hole tolerance
      Czytaj dalej
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      4.2 ~ 724 ~ 53Cast Iron[○]Carbide66 ~ 91End Mill ShankAvailableTiAlNAvailable
      Cena (bez VAT) od:
      107.05 €
      Cena zawiera VAT:
      127.39 €
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • TiAlN Coated Carbide Drill, Regular
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide Drill, Regular

      [Features] -Designed with small core diameter to improve chip evacuation-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, performance range, prices, delivery times, etc.
      Czytaj dalej
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      0.3 ~ 133 ~ 77Cast Iron[○]Carbide38 ~ 124End Mill ShankAvailableTiAlNN/A
      Cena (bez VAT) od:
      22.57 €
      Cena zawiera VAT:
      26.86 €
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • TiAlN Coated Carbide Drill, Straight Shank / Regular
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide Drill, Straight Shank / Regular

      [Features] -Multi-faceted carbide drill for a wide range of applications-TiAlN coating enables high-speed cutting-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.
      Czytaj dalej
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      1 ~ 812 ~ 75Cast Iron[○]Carbide34 ~ 117Straight ShankAvailableTiAlNN/A
      Cena (bez VAT) od:
      22.24 €
      Cena zawiera VAT:
      26.47 €
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • TiAlN Coated Carbide Long Drill, Straight Shank
      • Volume Discount

      MISUMI

      TiAlN Coated Carbide Long Drill, Straight Shank

      Carbide long drill that achieves the high efficiency deep-hole drilling
      Czytaj dalej
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      3 ~ 1060 ~ 140Cast Iron[○]Carbide100 ~ 200Straight ShankAvailableTiAlNAvailable / N/A
      Cena (bez VAT) od:
      100.26 €
      Cena zawiera VAT:
      119.31 €
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • TS Coated Carbide Drill for High-Hardness Steel Machining, Small Diameter / Stub / Regular
      • Volume Discount

      MISUMI

      TS Coated Carbide Drill for High-Hardness Steel Machining, Small Diameter / Stub / Regular

      A small radius type of the high-hardness steel series
      Czytaj dalej
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      0.8 ~ 36 ~ 27Cast Iron[○]Carbide47 ~ 67End Mill ShankAvailable-N/A
      Cena (bez VAT) od:
      42.03 €
      Cena zawiera VAT:
      50.02 €
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • DLC Coated Carbide Drill for Aluminium Machining, Regular
      • Volume Discount

      MISUMI

      DLC Coated Carbide Drill for Aluminium Machining, Regular

      [Features] -The DLC coating with excellent abrasion resistance and chip weld resistance makes it ideal for machining non-ferrous metals such as aluminium and copper-The high helix shape provides excellent chip evacuation and sharpness-The size range is suitable for drilling pilot holes for plastic processing with mould taps where precision is difficult to control-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, scope of services, prices, etc.
      Czytaj dalej
      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
      5.52 ~ 11.3841 ~ 71Cast Iron[○]Carbide85 ~ 128End Mill ShankAvailableDLCN/A
      Cena (bez VAT) od:
      83.76 €
      Cena zawiera VAT:
      99.67 €
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj