Rejestracja

Tłumaczymy nasz sklep na język polski!

Wymaga to jednak czasu, ponieważ w ofercie mamy dużo artykułów, a na nasz sklep składa się wiele stron. Chwilowo nasz katalog produktów dostępny będzie w języku angielskim. Dziękujemy za cierpliwość!
Kategoria
Zobacz więcej
Warunki filtrowania

Wyczyść wszystko

  • R Size(mm)
  • Type
  • work material
  • Blade length (ℓ)(mm)
    [5–30/1mm jedn.]
  • Number of flutes(sheet)
  • Coating
  • Producent

MISUMI Carbide Ball End Mills（Machining Application：Engraving）

Liczba pozycji: 39
* Informacje o dniach wysyłki, kosztach wysyłki i cenach.
Lista
Zdjęcie
Porównaj specyfikacje
  • 1
    • XAL series carbide ball end mill, 2-flute / short model
      • Volume Discount
      • XAL
      • General Steel
      • 2 Flutes

      MISUMI

      XAL series carbide ball end mill, 2-flute / short model

      XAL Series is the definitive choice for cost-sensitive customers
      Czytaj dalej
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.05 ～ 10BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○/◎] / Resin[○]0.2 ～ 382For General Steels (AlCrN, etc.)40 ～ 160-3 ～ 20
      Cena (bez VAT) od:
      14.53 €～
      Cena zawiera VAT:
      17.29 €～
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • TSC series carbide ball end mill, 3-flute / short model
      • Volume Discount
      • TS
      • General Steel
      • 3 Flutes
      • S (Short)

      MISUMI

      TSC series carbide ball end mill, 3-flute / short model

      [Features] -The 3-edge shape is resistant to chattering and enables high feed rate-The surface of the workpiece is very well finished after machining.-The coating has high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Czytaj dalej
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.5 ～ 10BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]2 ～ 253For High Hardness (Silicon Group)50 ～ 15015 ～ 756 ～ 20
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • TSC series carbide long neck ball end mill, 2-flute / long neck model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes

      MISUMI

      TSC series carbide long neck ball end mill, 2-flute / long neck model

      [Features] -Long neck shape suitable for deep cavity milling-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Czytaj dalej
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.05 ～ 3Long-Neck BallGeneral Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.07 ～ 82For High Hardness (Silicon Group)40 ～ 1100.2 ～ 603 ～ 8
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model
      • Volume Discount
      • TS
      • High-Hardness Steel
      • 3 Flutes

      MISUMI

      TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model

      [Features] The shape with 3 flutes and short flute length prevents chatter and enables high feed machiningThe tapered neck effectively suppresses chatterMachining of high hardness steel up to 65HRC is possibleThe coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, pricing, etc.
      Czytaj dalej
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.5 ～ 3Tapered neck ballGeneral Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]0.8 ～ 4.83For High Hardness (Silicon Group)70 ～ 11020 ～ 504 ～ 8
      Cena (bez VAT) od:
      74.53 €～
      Cena zawiera VAT:
      88.69 €～
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model
      • Volume Discount
      • Non-Coated
      • Aluminum
      • 2 Flutes
      • S (Short)

      MISUMI

      Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model

      A type for aluminum that achieves high efficiency while having the affordable uncoated design
      Czytaj dalej
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.5 ～ 6BallAluminum[◎] / Copper[○] / Graphite[○] / Resin[○]1.5 ～ 182Non-Coated50 ～ 11014 ～ 684 ～ 12
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute
      • Volume Discount
      • DIA
      • Graphite
      • 2 Flutes
      • L (Long)

      MISUMI

      Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute

      Diamond coated products that exert tremendous durability are available in the industry's lowest price
      Czytaj dalej
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.5 ～ 6BallAluminum[○] / Copper[○] / Graphite[◎] / Resin[○]3 ～ 552Dia Coat50 ～ 20020 ～ 654 ～ 12
      Cena (bez VAT) od:
      106.79 €～
      Cena zawiera VAT:
      127.08 €～
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • CBN Ball End Mill, 2-Flute
      • Volume Discount
      • High-Hardness Steel
      • 2 Flutes

      MISUMI

      CBN Ball End Mill, 2-Flute

      CBN ball end mill that's ideal for precision finishing is available at a value price
      Czytaj dalej
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.3 ～ 1BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]0.5 ～ 1.22Non-Coated501.5 ～ 54
      Cena (bez VAT) od:
      133.02 €～
      Cena zawiera VAT:
      158.29 €～
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • TSC series carbide ball end mill (R accuracy ±3μm)
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes
      • S (Short)

      MISUMI

      TSC series carbide ball end mill (R accuracy ±3μm)

      [Features] -Radius tolerance within 6 µm (compared to manufacturer's measurements), shank diameter tolerance h5 standard adopted. Optimal for high precision 3D machining of moulds with high quality tools with low quality variation-Seamless shape (sharpening from outer edge to centre of rounded blade in 1 process) is designed to create smooth cutting edge flank without steps.
      Czytaj dalej
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      1.5 ～ 3BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]4.5 ～ 92For High Hardness (Silicon Group)60 ～ 90-6
      Cena (bez VAT) od:
      48.69 €～
      Cena zawiera VAT:
      57.94 €～
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes
      • B (Stub)

      MISUMI

      TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model

      [Features] -Designed with optimum blade length, shank length and overall length considering processing with shrink fit holder-Radius tolerance within 6 µm (compared to manufacturer's measurements), shank diameter tolerance h5 standard adopted. High-precision tools with low quality variation are ideal for high-precision 3D machining of moulds-Sampless shape (sharpening from the outer edge to the centre of the rounded blade in one process) is designed to produce a smooth cutting edge without steps.
      Czytaj dalej
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.3 ～ 2BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.6 ～ 42For High Hardness (Silicon Group)40-6
      Cena (bez VAT) od:
      66.91 €～
      Cena zawiera VAT:
      79.62 €～
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes
      • B (Stub)

      MISUMI

      TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model

      [Features] -Compatible with shrink fit chucks for high precision machining-Designed with short flute length and overall length for shrink fit and emphasis on rigidityIt has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.
      Czytaj dalej
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.2 ～ 6BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.4 ～ 122For High Hardness (Silicon Group)40 ～ 65-4 ～ 12
      Cena (bez VAT) od:
      25.08 €～
      Cena zawiera VAT:
      29.85 €～
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • XAC series carbide ball end mill, 2-flute / short model
      • Volume Discount
      • TiAlN
      • General Steel
      • 2 Flutes
      • S (Short)

      MISUMI

      XAC series carbide ball end mill, 2-flute / short model

      [Features] All-purpose ball nose end mill with 2 cutting edges for a wide range of profiling-For rough machining of workpieces that are expected to have a good surface finish after machining-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.
      Czytaj dalej
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.2 ～ 12.5BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.8 ～ 502TiAlN40 ～ 180-3 ～ 25
      Cena (bez VAT) od:
      22.45 €～
      Cena zawiera VAT:
      26.72 €～
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • XAC series carbide ball end mill, 2-flute / short, long shank model
      • Volume Discount
      • TiAlN
      • General Steel
      • 2 Flutes

      MISUMI

      XAC series carbide ball end mill, 2-flute / short, long shank model

      [Features] -Ideal for high precision 3D machining of moulds due to high tool rigidity and excellent chip evacuation-For rough machining of the workpiece, a good surface finish can be expected after machining.-Long shank type, ideal for deep cavity milling-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
      Czytaj dalej
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      2 ～ 8BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]8 ～ 302TiAlN100 ～ 250-4 ～ 16
      Cena (bez VAT) od:
      43.83 €～
      Cena zawiera VAT:
      52.16 €～
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • TSC series carbide ball end mill, short model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes
      • S (Short)

      MISUMI

      TSC series carbide ball end mill, short model

      [Features] -Good surface finish can be expected for the rough surface of the workpiece after machiningIt has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Czytaj dalej
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.05 ～ 10BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.2 ～ 252For High Hardness (Silicon Group)40 ～ 15015 ～ 753 ～ 20
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • TSC series carbide ball end mill, regular model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes
      • R (Regular)

      MISUMI

      TSC series carbide ball end mill, regular model

      [Features] -Regular bridge length allows for many regrinding times-Can be regrinded. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Czytaj dalej
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.2 ～ 8BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]1.5 ～ 302For High Hardness (Silicon Group)50 ～ 14017 ～ 804 ～ 16
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • TSC series carbide ball end mill, 2-flute / short, long shank model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes
      • S (Short)

      MISUMI

      TSC series carbide ball end mill, 2-flute / short, long shank model

      [Features] -Long shank, ideal for deep cavity millingIt has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Czytaj dalej
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.5 ～ 12.5BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]2 ～ 302For High Hardness (Silicon Group)70 ～ 28015 ～ 803 ～ 25
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes
      • B (Stub)

      MISUMI

      TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model

      A lineup of 16 sizes centering on small diameter that employs a unique spherical cutting edge
      Czytaj dalej
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.5 ～ 5Long-Neck Ball / Spherical BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]-2For High Hardness (Silicon Group)70 ～ 904 ～ 556 ～ 10
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • TSC series carbide ball end mill, 3-flute / regular model
      • Volume Discount
      • TS
      • General Steel
      • 3 Flutes
      • R (Regular)

      MISUMI

      TSC series carbide ball end mill, 3-flute / regular model

      [Features] -The 3-edge shape is chatter resistant and enables high feed-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Czytaj dalej
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      1 ～ 6BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]5 ～ 223For High Hardness (Silicon Group)50 ～ 11017 ～ 726 ～ 12
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • TSC series carbide ball end mill, short model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes
      • S (Short)

      MISUMI

      TSC series carbide ball end mill, short model

      [Features] -The surface of the workpiece is very good after machining.-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.
      Czytaj dalej
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      1 ～ 10BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]3 ～ 254For High Hardness (Silicon Group)50 ～ 15015 ～ 756 ～ 20
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • TSC series carbide ball end mill, 4-flute / regular model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes
      • R (Regular)

      MISUMI

      TSC series carbide ball end mill, 4-flute / regular model

      [Features] -The surface of the workpiece is very good after machining.-It has coating with high oxidation resistance and high hardness, and achieves long service life. As a coating property, it is effective in high-speed machining and dry machining.-Can be reground. Please refer to the "Regrinding Service" page for application methods, range of services, prices, etc.
      Czytaj dalej
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      1.5 ～ 6BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]5 ～ 224For High Hardness (Silicon Group)60 ～ 11017 ～ 726 ～ 12
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • Carbide ball end mill, 2-flute / short model
      • Volume Discount
      • Non-Coated
      • General Steel
      • 2 Flutes
      • S (Short)

      MISUMI

      Carbide ball end mill, 2-flute / short model

      Highly versatile due to the non-coated specification
      Czytaj dalej
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.2 ～ 10BallGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]0.8 ～ 252Non-Coated40 ～ 150-3 ～ 20
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model
      • Volume Discount
      • TS
      • General Steel
      • 2 Flutes

      MISUMI

      TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model

      [Features] -High rigidity, 2 flute type with longitudinal taper-It has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Czytaj dalej
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.15 ～ 5Tapered neck ballGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.3 ～ 82For High Hardness (Silicon Group)50 ～ 1101.5 ～ 604 ～ 12
      Cena (bez VAT) od:
      33.49 €～
      Cena zawiera VAT:
      39.85 €～
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model
      • Volume Discount
      • TS
      • General Steel
      • 3 Flutes

      MISUMI

      TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model

      [Features] -High feed, high rigidity 3-spiral taper shape with taper length-It has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.
      Czytaj dalej
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.5 ～ 3Tapered neck ballGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.8 ～ 63For High Hardness (Silicon Group)50 ～ 1107 ～ 604 ～ 8
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • TSC series carbide long neck ball end mill, 3-flute / long neck model
      • Volume Discount
      • TS
      • General Steel
      • 3 Flutes

      MISUMI

      TSC series carbide long neck ball end mill, 3-flute / long neck model

      [Features] -Long-neck ball with 3 cutting edges, suitable for high-speed machining of deep cutting areas-The coating has high oxidation resistance and high hardness, and achieves long service life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Czytaj dalej
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.5 ～ 3Long-Neck BallGeneral Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.8 ～ 4.82 ～ 3For High Hardness (Silicon Group)50 ～ 1103 ～ 504 ～ 6
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • TSC series carbide long neck ball end mill, 4-flute / long neck model
      • Volume Discount
      • TS
      • General Steel
      • 4 Flutes

      MISUMI

      TSC series carbide long neck ball end mill, 4-flute / long neck model

      [Features] -Long Neck Ball 4-Flute type suitable for high-feed machining of deep cutting areas-It has coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Czytaj dalej
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      1 ～ 3Long-Neck BallGeneral Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]1.6 ～ 64For High Hardness (Silicon Group)50 ～ 704 ～ 304 ～ 6
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • TS Coated Carbide Ball End Mill, Cutting Edge Rigidity Machining / For High-Hardness Steel Machining, 2-Flute / No Side Blade
      • Volume Discount
      • TS
      • High-Hardness Steel
      • 2 Flutes

      MISUMI

      TS Coated Carbide Ball End Mill, Cutting Edge Rigidity Machining / For High-Hardness Steel Machining, 2-Flute / No Side Blade

      [Features] -Ultra-fine-grained carbide base material suitable for machining high hardness steels is used (according to the manufacturer's cutting test results).-MIAutomatic steelI-Original shape with rigid cutting edge treatment and no side cutting edge. High strength of the tool and cutting edge, resulting in a stable cutting edge shape and long tool life in high-speed milling-Can be reground. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.
      Czytaj dalej
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      1 ～ 5BallGeneral Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]1 ～ 52For High Hardness (Silicon Group)50 ～ 905 ～ 106 ～ 10
      Cena (bez VAT) od:
      108.89 €～
      Cena zawiera VAT:
      129.58 €～
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model
      • Volume Discount
      • TS
      • High-Hardness Steel
      • 2 Flutes
      • B (Stub)

      MISUMI

      TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model

      The high precision ball end mill for shrink fit holder is ideal for the high-precision 3D machining of high-hardness steel
      Czytaj dalej
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.3 ～ 3BallGeneral Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]0.6 ～ 62For High Hardness (Silicon Group)40-6
      Cena (bez VAT) od:
      66.98 €～
      Cena zawiera VAT:
      79.71 €～
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • TSC Series Carbide Ball End Mill for Stainless Steel Machining, 2-Flute / Short Model
      • Volume Discount
      • TS
      • SUS
      • 2 Flutes
      • S (Short)

      MISUMI

      TSC Series Carbide Ball End Mill for Stainless Steel Machining, 2-Flute / Short Model

      Blade shape ball end mill that's suitable for work materials with low thermal conductivity such as the hard-to-cut SUS
      Czytaj dalej
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      1 ～ 5BallGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○]3 ～ 152For High Hardness (Silicon Group)50 ～ 100-6 ～ 10
      Cena (bez VAT) od:
      99.51 €～
      Cena zawiera VAT:
      118.42 €～
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • DLC Coated Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model
      • Volume Discount
      • DLC
      • Aluminum
      • 2 Flutes
      • S (Short)

      MISUMI

      DLC Coated Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model

      The cutting performance of aluminum has been improved by the combination of sharp cutting edge and DLC coating
      Czytaj dalej
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.5 ～ 6BallAluminum[◎] / Copper[○] / Resin[○]1.5 ～ 182DLC50 ～ 11014 ～ 684 ～ 12
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • CRN Coated Ball End Mill for Copper Electrode Machining, 2-Flute / Short Model
      • Volume Discount
      • CrN
      • Copper
      • 2 Flutes
      • S (Short)

      MISUMI

      CRN Coated Ball End Mill for Copper Electrode Machining, 2-Flute / Short Model

      Ideal for copper electrode processing due to the CrN coating that exhibits excellent lubricity
      Czytaj dalej
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.5 ～ 6BallAluminum[○] / Copper[◎] / Resin[○]1.5 ～ 182CrN50 ～ 120-4 ～ 12
      Cena (bez VAT) od:
      33.74 €～
      Cena zawiera VAT:
      40.15 €～
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • CRN Coated Carbide Long Neck Ball End Mill for Copper Electrode Machining, 2-Flute / Stub, Long Neck Model
      • Volume Discount
      • CrN
      • Copper
      • 2 Flutes

      MISUMI

      CRN Coated Carbide Long Neck Ball End Mill for Copper Electrode Machining, 2-Flute / Stub, Long Neck Model

      CrN coated products that are ideal for copper electrode processing are available at affordable prices
      Czytaj dalej
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.2 ～ 2Long-Neck BallAluminum[○] / Copper[◎] / Graphite[○] / Resin[○]0.4 ～ 42CrN50 ～ 1102 ～ 404 ～ 6
      Cena (bez VAT) od:
      33.74 €～
      Cena zawiera VAT:
      40.15 €～
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • Diamond Coated Carbide Ball End Mill for Graphite Machining, 4-Flute / Short Model
      • Volume Discount
      • DIA
      • Graphite
      • 4 Flutes
      • S (Short)

      MISUMI

      Diamond Coated Carbide Ball End Mill for Graphite Machining, 4-Flute / Short Model

      4-flute ball for graphite that achieves high feed
      Czytaj dalej
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      1 ～ 6BallAluminum[○] / Copper[○] / Graphite[◎] / Resin[○]4 ～ 244Dia Coat50 ～ 80-6 ～ 12
      Cena (bez VAT) od:
      99.52 €～
      Cena zawiera VAT:
      118.43 €～
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute / Stub, Long Neck Model (for Deep Ribbing)
      • Volume Discount
      • DIA
      • Graphite
      • 2 Flutes

      MISUMI

      Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute / Stub, Long Neck Model (for Deep Ribbing)

      Astonishingly inexpensive! Unprecedented price reduction on the premium diamond coated products!
      Czytaj dalej
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.2 ～ 3Long-Neck BallAluminum[◎] / Copper[○] / Graphite[◎] / Resin[○]0.6 ～ 7.52Dia Coat50 ～ 1102 ～ 604 ～ 6
      Cena (bez VAT) od:
      87.71 €～
      Cena zawiera VAT:
      104.37 €～
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • Carbide Ball End Mill for Graphite Machining, 2-Flute / Long Model
      • Volume Discount
      • Non-Coated
      • Graphite
      • 2 Flutes
      • L (Long)

      MISUMI

      Carbide Ball End Mill for Graphite Machining, 2-Flute / Long Model

      The price of the non-coated product with excellent cost performance has been further reduced
      Czytaj dalej
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      1 ～ 6BallAluminum[○] / Copper[○] / Graphite[◎] / Resin[○]10 ～ 552Non-Coated100 ～ 20020 ～ 654 ～ 12
      Cena (bez VAT) od:
      80.28 €～
      Cena zawiera VAT:
      95.53 €～
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • Carbide Ball End Mill for Resin Machining, 2-Flute / Short Model
      • Volume Discount
      • Non-Coated
      • Resin
      • 2 Flutes
      • S (Short)

      MISUMI

      Carbide Ball End Mill for Resin Machining, 2-Flute / Short Model

      Sharp edge that's suitable for machining resin
      Czytaj dalej
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.5 ～ 6BallAluminum[○] / Copper[○] / Graphite[○] / Resin[◎]1.5 ～ 182Non-Coated50 ～ 120-4 ～ 12
      Cena (bez VAT) od:
      31.53 €～
      Cena zawiera VAT:
      37.52 €～
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • XAL Series Carbide Long Neck Ball End Mill, 2-Flute / Stub, Long Neck Model
      • Volume Discount
      • XAL
      • General Steel
      • 2 Flutes

      MISUMI

      XAL Series Carbide Long Neck Ball End Mill, 2-Flute / Stub, Long Neck Model

      A significant number of specifications has been added to the XAL series that can be widely used for everything from general steel to copper
      Czytaj dalej
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.05 ～ 3Long-Neck BallGeneral Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]0.07 ～ 62For General Steels (AlCrN, etc.)50 ～ 1100.2 ～ 603 ～ 6
      Cena (bez VAT) od:
      17.09 €～
      Cena zawiera VAT:
      20.34 €～
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Short Model
      • Volume Discount
      • MR
      • General Steel
      • 2 Flutes
      • S (Short)

      MISUMI

      MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Short Model

      High-performance products with emphasis on the machined surface accuracy are available in the deferred prices of the conventional products!
      Czytaj dalej
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.1 ～ 10BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]0.4 ～ 252MRC50 ～ 150-4 ～ 20
      Cena (bez VAT) od:
      19.40 €～
      Cena zawiera VAT:
      23.09 €～
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Regular Model
      • Volume Discount
      • MR
      • General Steel
      • 2 Flutes
      • R (Regular)

      MISUMI

      MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Regular Model

      The user friendly regular flute length type is released simultaneously
      Czytaj dalej
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.2 ～ 8BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]1.5 ～ 302MRC50 ～ 140-4 ～ 16
      Cena (bez VAT) od:
      22.98 €～
      Cena zawiera VAT:
      27.35 €～
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • MRC Series Carbide Long Neck Ball End Mill, 2-Flute / Long Neck Model
      • Volume Discount
      • MR
      • General Steel
      • 2 Flutes
      • S (Short)

      MISUMI

      MRC Series Carbide Long Neck Ball End Mill, 2-Flute / Long Neck Model

      High-performance MRC series is available in the industry's largest number of sizes
      Czytaj dalej
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.05 ～ 3Long-Neck BallGeneral Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]0.07 ～ 62MRC50 ～ 1100.2 ～ 604 ～ 6
      Cena (bez VAT) od:
      20.69 €～
      Cena zawiera VAT:
      24.62 €～
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • XAL Series Carbide Ball End Mill, 2-Flute / Regular Model
      • Volume Discount
      • XAL
      • General Steel
      • 2 Flutes

      MISUMI

      XAL Series Carbide Ball End Mill, 2-Flute / Regular Model

      The regular flute length type is introduced in the low-price and popular XAL balls
      Czytaj dalej
      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
      0.2 ～ 8BallGeneral Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]1.5 ～ 482For General Steels (AlCrN, etc.)50 ～ 140-4 ～ 16
      Cena (bez VAT) od:
      16.61 €～
      Cena zawiera VAT:
      19.77 €～
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
  • 1

    • Kategorie związane z Carbide Ball End Mills