Tłumaczymy nasz sklep na język polski!

Wymaga to jednak czasu, ponieważ w ofercie mamy dużo artykułów, a na nasz sklep składa się wiele stron. Chwilowo nasz katalog produktów dostępny będzie w języku angielskim. Dziękujemy za cierpliwość!

Kategoria

Zobacz więcej

Warunki filtrowania

Wyczyść wszystko

Blade diameter (D)(φ)
- 0.2
- 0.3
- 0.4
- 0.5
- 0.6
- 0.7
- 0.8
- 0.9
- 1
- 1.2
- 1.5
- 2
- 2.5
- 2.8
- 3
- 3.5
- 4
- 4.5
- 5
- 5.5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 16
- 17
- 18
- 20
- 22
R Size(mm)
- 0.05
- 0.1
- 0.2
- 0.3
- 0.4
- 0.5
- 0.6
- 0.7
- 0.75
- 0.8
- 0.813
- 0.9
- 1
- 1.1
- 1.2
- 1.219
- 1.3
- 1.4
- 1.5
- 1.6
- 1.625
- 1.7
- 1.8
- 1.9
- 2
- 2.031
- 2.1
- 2.2
- 2.3
- 2.4
- 2.438
- 2.465
- 2.5
- 2.6
- 2.607
- 2.7
- 2.8
- 2.9
- 3
- 4
[0.1–3/0.1mm jedn.]
work material
- General Steel
- Quenched and tempered steel
- High Hardness Steel: to HRC55
- High Hardness Steel: to HRC60
- High Hardness Steel: to HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Blade length (ℓ)(mm)
- 0.16
- 0.24
- 0.28
- 0.3
- 0.32
- 0.4
- 0.48
- 0.5
- 0.56
- 0.6
- 0.64
- 0.7
- 0.72
- 0.8
- 0.9
- 0.96
- 1
- 1.2
- 1.5
- 1.6
- 1.8
- 2
- 2.25
- 2.3
- 2.4
- 2.5
- 3
- 3.2
- 3.5
- 3.7
- 4
- 4.5
- 4.8
- 5
- 5.25
- 5.6
- 6
- 6.75
- 7
- 7.5
- 8
- 8.25
- 8.4
- 9
- 10
- 10.5
- 11
- 12
- 12.5
- 13
- 13.5
- 14
- 15
- 16
- 16.5
- 17.5
- 18
- 19
- 20
- 21
- 22
- 24
- 25
- 26
- 27
- 28
- 30
- 32
- 33
- 34
- 35
- 36
- 38
- 40
- 42
- 45
- 48
- 50
- 56
- 60
[5–56/1mm jedn.]
Number of flutes(sheet)
- 2
- 3
- 4
Type
- Radius
- High-Feed Radius
- Long-Neck Radius
- Tapered neck radius
Overall Length (L)(mm)
- 35
- 39
- 40
- 45
- 50
- 51
- 55
- 57
- 60
- 63
- 65
- 70
- 72
- 75
- 80
- 83
- 85
- 90
- 92
- 95
- 100
- 104
- 105
- 110
- 115
- 120
- 125
- 130
- 135
- 140
- 150
- 160
- 180
- 200
Shank diameter (d)(mm)
- 3
- 4
- 5
- 6
- 8
- 10
- 12
- 14
- 16
- 18
- 20
Underneck length (ℓ1)(mm)
- 1
- 1.5
- 2
- 2.5
- 3
- 3.8
- 4
- 5
- 6
- 7.5
- 8
- 10
- 12
- 12.35
- 14
- 14.35
- 15
- 16
- 16.65
- 18
- 20
- 24
- 25
- 26
- 30
- 32
- 35
- 40
- 50
- 55
- 60
- 70
- 80
- 85
- 95
- 100
- 105
- 108
[8–92/1mm jedn.]
Machining Application
- Inclined Cuts
Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- DLC
- Dia Coat
- Non-Coated
Torsion Angle (θ)
- No torsion
- Standard Helix (30˚ to 40˚)
- High Helix (45˚ to 60˚)
R Precision(μm)
- -0.014～-0.028
- 0～-0.01
- ±0.005
- ±0.01
- ±0.015
- ±0.02
- ±20
Producent

Carbide Radius End Mills (Machining Application: Inclined Cuts Strona 2)

Liczba pozycji: 72

* Informacje o dniach wysyłki, kosztach wysyłki i cenach.

Lista

Zdjęcie

Porównaj specyfikacje

Liczba pozycji do wyświetlenia:Sortuj według:

Data wysyłki:

Poprzednia

DLC Coated Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model

Volume Discount
DLC
Aluminum
2 Flutes
R (Regular)

MISUMI

DLC Coated Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model

In addition to the standard products, the radius can be selected extensively for manufactured products

Czytaj dalej

Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
2 ～ 12	0.2 ～ 1	Aluminum[◎] / Copper[○] / Resin[○]	5 ～ 36	2	Radius	40 ～ 80	4 ～ 12	23 ～ 50

Standardowa data wysyłki:

5 dni robocze

Konfiguruj

DLC Coated Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model

Volume Discount
DLC
Aluminum
3 Flutes
R (Regular)

MISUMI

DLC Coated Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model

The radius-equipped type prevents cutter marks and also shows effectiveness in improving the surface roughness

Czytaj dalej

Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
2 ～ 12	0.2 ～ 1	Aluminum[◎] / Copper[○] / Resin[○]	5 ～ 36	3	Radius	40 ～ 80	4 ～ 12	23 ～ 50

Standardowa data wysyłki:

5 dni robocze

Konfiguruj

Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model

Volume Discount
Non-Coated
Aluminum
2 Flutes
R (Regular)

MISUMI

Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model

Non-coated manufactured products can be shipped on the 5th day in addition to the stocked products

Czytaj dalej

Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
2 ～ 12	0.2 ～ 1	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	5 ～ 36	2	Radius	40 ～ 80	4 ～ 12	23 ～ 50

Standardowa data wysyłki:

5 dni robocze

Konfiguruj

Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model

Volume Discount
Non-Coated
Aluminum
3 Flutes
R (Regular)

MISUMI

Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model

Radius type that's also effective in preventing cutter marks

Czytaj dalej

Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
2 ～ 12	0.2 ～ 1	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	5 ～ 36	3	Radius	40 ～ 80	4 ～ 12	23 ～ 50

Standardowa data wysyłki:

5 dni robocze

Konfiguruj

Diamond Coated Carbide Radius End Mill for Graphite Machining, 4-Flute / Long Model

Volume Discount
DIA
Graphite
4 Flutes
Long

MISUMI

Diamond Coated Carbide Radius End Mill for Graphite Machining, 4-Flute / Long Model

The diamond coated radius shape that's ideal for shaping graphite

Czytaj dalej

Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
6 ～ 12	0.5 ～ 3	Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○]	30 ～ 60	4	Radius	150 ～ 200	6 ～ 12	60 ～ 85

Cena (bez VAT) od:

166.75 €～

Standardowa data wysyłki:

5 dni robocze

Konfiguruj

Carbide Radius End Mill for Resin Machining, 2-Flute / Regular Model

Volume Discount
Non-Coated
Resin
2 Flutes
R (Regular)

MISUMI

Carbide Radius End Mill for Resin Machining, 2-Flute / Regular Model

Small radius type that prevents cutter marks on resin

Czytaj dalej

Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
1 ～ 10	0.2	Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]	3 ～ 30	2	Radius	50 ～ 80	3 ～ 10	-

Cena (bez VAT) od:

44.46 €～

Standardowa data wysyłki:

5 dni robocze

Konfiguruj

TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model

Volume Discount
TS
High-Hardness Steel
3 Flutes

MISUMI

TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model

[Features] -High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining-The long neck type is ideal for milling deep pockets, etc.-Multi-use for engraving, side faces, R, coarse and medium finish-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Czytaj dalej

Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
4 ～ 12	1 ～ 2	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	8 ～ 24	3	Long-Neck Radius	70 ～ 140	4 ～ 12	-

Cena (bez VAT) od:

90.46 €～

Standardowa data wysyłki:

5 dni robocze

Konfiguruj

Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill

Non-Coated
General Steel

MISUMI

Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill

[Features] -Alteration cutter that can determine the radius of the carbide cutter in 0.1 mm increments-Can be reground. Please refer to the "Regrinding service" page for information on possible applications, range of services, prices, etc.

Czytaj dalej

Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
1 ～ 20	0.1 ～ 3	General Steel[◎] / Quenched and tempered steel[○/◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	4 ～ 60	2 ～ 4	Radius	40 ～ 125	4 ～ 20	-

Standardowa data wysyłki:

7 dni robocze

Konfiguruj

XCP Coated Carbide Radius End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / Blade Length 2.5D Type / Regular Type

Volume Discount

MISUMI

XCP Coated Carbide Radius End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / Blade Length 2.5D Type / Regular Type

· A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.· 45° radius end mill capable of high-speed and high-efficiency machining

Czytaj dalej

Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
4 ～ 12	0.2 ～ 1	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	18 ～ 38	4	Radius	60 ～ 100	6 ～ 12	-

Cena (bez VAT) od:

75.31 €～

Standardowa data wysyłki:

5 dni robocze

Konfiguruj

XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion / Short Model

Volume Discount

MISUMI

XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion / Short Model

Introducing the short type in the 4-flute radius for high-efficiency and high-speed machining

Czytaj dalej

Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
2 ～ 20	0.2 ～ 3	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	4 ～ 45	4	Radius	50 ～ 110	4 ～ 20	-

Cena (bez VAT) od:

17.06 €～

Standardowa data wysyłki:

5 dni robocze

Konfiguruj

VAC Series Carbide 2-Flute Long Neck Radius End Mill

Volume Discount

MISUMI

VAC Series Carbide 2-Flute Long Neck Radius End Mill

[Features] -Effective for deep cutting due to long neck-Ultra-fine particle carbide base material and coating with excellent adhesion and heat resistance are adopted-Can handle heat treated steel up to 50HRC-Cutting edge radius also reinforced cutting edge stiff-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Czytaj dalej

Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
0.4 ～ 12	0.1 ～ 1	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	0.6 ～ 18	-	Long-Neck Radius	40 ～ 100	4 ～ 12	2 ～ 50

Cena (bez VAT) od:

38.08 €～

Standardowa data wysyłki:

5 dni robocze

Konfiguruj

VAC Series Carbide 4-Flute Uneven Lead Long Neck Radius End Mill

Volume Discount

MISUMI

VAC Series Carbide 4-Flute Uneven Lead Long Neck Radius End Mill

[Features] -Effective for deep cutting due to long neck type-Ultra-fine particle carbide base material and coating with excellent adhesion and heat resistance are adopted-Can process heat treated steel up to 50HRC-Cutting edge radius also reinforced cutting edge rigid-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Czytaj dalej

Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
1 ～ 12	0.2 ～ 1	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	1.5 ～ 30	4	Long-Neck Radius	50 ～ 110	4 ～ 12	4 ～ 50

Cena (bez VAT) od:

40.28 €～

Standardowa data wysyłki:

5 dni robocze

Konfiguruj

Volume Discount

NACHI(FUJIKOSHI)

DLC Mill, Radius 2DLCM-R

End-mill for aluminum and copper alloys. R part processing of corner of the groove is possible.

Czytaj dalej

Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
3	0.2	Aluminum[◎] / Copper[○]	8	2	Radius	45	6	-

Cena (bez VAT) od:

95.67 €

Standardowa data wysyłki:

6 dni robocze

Konfiguruj

OSG

CBN End MILL (Small-Diameter, 2-Flute, Corner Radius End Mill) CBN-SXR

The three-dimensional negative shape of the R-profile provides both sharpness and rigidity, and the effect of the spiral blade suppresses fluctuations in cutting force, enabling high-precision side milling.

Czytaj dalej

Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
0.5 ～ 3	0.05 ～ 0.5	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]	0.3 ～ 1.8	2	Radius	45 ～ 50	4 ～ 6	1.5 ～ 6

Cena (bez VAT) od:

101.29 €～

Standardowa data wysyłki:

6 dni robocze

Konfiguruj

Carbide End Mill Phoenix Long Neck Tough Radius PHX-LN-CRE

Volume Discount

OSG

Carbide End Mill Phoenix Long Neck Tough Radius PHX-LN-CRE

4-cutter radius cutter with long neck, suitable for rib machining.

Czytaj dalej

Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
0.8 ～ 3	0.1 ～ 0.5	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○]	0.32 ～ 1.2	4	Long-Neck Radius	50	4	2 ～ 16.65

Cena (bez VAT) od:

84.40 €～

Standardowa data wysyłki:

6 dni robocze

Konfiguruj

OSG

CBN End Mill (Small-Diameter, 2-Flute, Long Neck Radius) CBN-LN-SXR

The CBN construction allows for highly efficient and accurate machining, and fewer tool changes make for continuous machining, which reduces costs.

Czytaj dalej

Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
0.5 ～ 3	0.05 ～ 0.5	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]	0.3 ～ 1.8	2	Long-Neck Radius	45 ～ 50	4 ～ 6	2.5 ～ 12

Cena (bez VAT) od:

114.29 €～

Standardowa data wysyłki:

6 dni robocze

Konfiguruj

KYOWA SEIKO

CBN 2-Flute Corner Radius End Mill SBRE-2

Direct milling of high-hardness materials and hardened steel.Increasing the depth of cut is possible.Machining applications (machining mode): flat surface / side face / curved surface / groove / angled cut

Czytaj dalej

Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
0.3 ～ 6	-	High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]	0.3 ～ 2	2	Radius	50 ～ 60	6	-

Cena (bez VAT) od:

166.80 €～

Standardowa data wysyłki:

8 dni robocze

Konfiguruj

KYOWA SEIKO

CBN 2-Flute Corner Radius End Mill SBREF-2

Direct carving of high hardness materials and hardened steel.It is possible to increase the depth of cut.Machining applications (machining type): flat face / side face / curved face / groove / bevel cut.

Czytaj dalej

Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
0.3 ～ 3	-	High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]	0.3 ～ 2	2	Radius	50 ～ 60	4	-

Cena (bez VAT) od:

159.70 €～

Standardowa data wysyłki:

8 dni robocze

Konfiguruj

KYOWA SEIKO

CBN 3-Flute Corner Radius End Mill SBRE-3

Direct milling of high hardness materials and hardened steel.High efficiency machining is possible with high feed rate.Machining applications (machining shape): flat surface / side surface / curved surface / groove / bevel cut.

Czytaj dalej

Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
3 ～ 6	-	High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]	1.5 ～ 2	3	High-Feed Radius	50 ～ 70	6	-

Cena (bez VAT) od:

288.25 €～

Standardowa data wysyłki:

8 dni robocze

Konfiguruj

KYOWA SEIKO

CBN 3-Flute Corner Radius End Mill SBREF-3

Direct milling of high-hardness materials and hardened steelHighly efficient machining with high feed rate possibleMachining applications (machining mode): flat surface / side surface / curved surface / groove / angled cut.

Czytaj dalej

Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
0.3 ～ 2	-	High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]	0.5 ～ 1.5	3	High-Feed Radius	50	4	-

Cena (bez VAT) od:

188.11 €～

Standardowa data wysyłki:

8 dni robocze

Konfiguruj

End Mill with 2 Carbide Flutes and Corner Radius KSER-2

Volume Discount

KYOWA SEIKO

End Mill with 2 Carbide Flutes and Corner Radius KSER-2

[Features] It can be used for flat surface machining, side machining, curved surface machining, grooving and angular cutting. [Features] By using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.

Czytaj dalej

Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
1 ～ 4	-	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	1 ～ 40	2	Radius	50 ～ 80	4 ～ 6	-

Cena (bez VAT) od:

91.83 €～

Standardowa data wysyłki:

8 dni robocze

Konfiguruj

End Mill with 2 Carbide Flutes and Corner Radius KSR-2

Volume Discount

KYOWA SEIKO

End Mill with 2 Carbide Flutes and Corner Radius KSR-2

Czytaj dalej

Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
1 ～ 6	-	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	3 ～ 13	2	Radius	40 ～ 50	4 ～ 6	-

Cena (bez VAT) od:

84.42 €～

Standardowa data wysyłki:

8 dni robocze

Konfiguruj

KYOWA SEIKO

Endmill with 3 Carbide Flutes for Aluminum Alloys for Use with Vertical Walls ALRE-3DLC

[Specifications]· Shape: Radius End Mill (carbide)· Material: Super Micro Grain Alloy· Work materials: General steel [◎] / tempered steel [○] / stainless steel [◎] / cast iron [◎][Applications] Flat Surfaces / Side Surfaces / Curved Surfaces / Grooves / Inclined Cutting

Czytaj dalej

Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
8 ～ 16	-	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	12 ～ 24	3	-	100 ～ 160	6 ～ 14	-

Cena (bez VAT) od:

128.44 €～

Standardowa data wysyłki:

8 dni robocze

Konfiguruj

KYOWA SEIKO

Endmill with 3 Carbide Flutes and Corner Radius for Aluminum Alloys Short Type ALERS-3DLC

[Specifications]· Shape: Radius End Mill (carbide)· Material: Super Micro Grain Alloy· Work Materials: Aluminum [◎], Copper [◎][Applications] Flat Surfaces / Side Surfaces / Curved Surfaces / Grooves / Inclined Cutting

Czytaj dalej

Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
3 ～ 16	-	Aluminum[◎] / Copper[◎]	6 ～ 32	3	-	60 ～ 100	6 ～ 16	-

Cena (bez VAT) od:

109.63 €～

Standardowa data wysyłki:

8 dni robocze

Konfiguruj

KYOWA SEIKO

Endmill with 3 Carbide Flutes and Corner Radius for Aluminum Alloys Strong Type ALERT-3DLC

Czytaj dalej

Blade diameter (D)(φ)	R Size(mm)	work material	Blade length (ℓ)(mm)	Number of flutes(sheet)	Type	Overall Length (L)(mm)	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)
3 ～ 16	-	Aluminum[◎] / Copper[◎]	4.5 ～ 24	3	-	60 ～ 120	6 ～ 16	-

Cena (bez VAT) od:

102.52 €～

Standardowa data wysyłki:

8 dni robocze

Konfiguruj

End Mill with 4 Carbide Flutes and Corner Radius KSRA-4

Volume Discount

KYOWA SEIKO

End Mill with 4 Carbide Flutes and Corner Radius KSRA-4

[Features] A carbide cutter suitable for general steel, stainless steel and other workpieces, 2 cutting edges, with corner R.It is resistant to breakage and chipping.The high cutting speed and high production efficiency lead to a reduction in overall production costs.[Features] Suitable for plate milling, side milling, curved surface milling, grooving and ramping.

Czytaj dalej