Carbide Radius End Mills（Machining Application：Inclined Cuts）

Search by sub-category

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 13 Days or Less 15 Days or Less

?* Information on days to ship and prices

HGGVRX HG Coated Carbide High Helix Radius

SANKO MFG

[Features]
· HGGCNX radius type.
· Suitable for corner rounding or cutting curved surfaces.
· High efficiency machining can be achieved due to a larger contact area than with a ball end mill, which increases the pick feed.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	85.81 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

XAL series carbide radius end mill, 4-flute / short model

MISUMI

The 4-flute type that simultaneously achieves improved efficiency and tool cost reduction can be selected from 17 sizes

Volume Discount

XAL
General Steel
4 Flutes

Select to compare

Configure now
Starting from^∗ ：	18.89 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model

MISUMI

[Features]
-Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, which enables high-speed feed (2) Minimizing cusp height (unmachined part) when contour milling reduces the number of middle finishing operations
-Long neck type, which avoids tool interference, achieves high efficiency even when milling deep cavities
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Volume Discount

TS
High-Hardness Steel
3 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	89.61 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XAL series carbide radius end mill, 3-flute, 45° torsion / regular model

MISUMI

3-flute 45° helix radius that's resistant to chattering is available at an affordable price

Volume Discount

XAL
General Steel
3 Flutes

Select to compare

Configure now
Starting from^∗ ：	23.73 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XAL series carbide radius end mill, 4-flute, 45° torsion / regular model

MISUMI

4-Flute Radius for High-Efficiency and High-Speed Machining

Volume Discount

XAL
General Steel
4 Flutes

Select to compare

Configure now
Starting from^∗ ：	23.73 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XAL series carbide radius end mill, 2-flute / short model

MISUMI

Radius end mills are available at low prices

Volume Discount

XAL
General Steel
2 Flutes

Select to compare

Configure now
Starting from^∗ ：	14.52 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade

MISUMI

[Features]
-High rigidity is achieved by using a negative radius and a short cutting edge length with no helix angle, and chatter is suppressed even in pocket corners
-Since the machine has a rear taper, it is possible to perform machining without the peripheral edge hitting the side when machining corners
-Even when machining the bottom side, a single machine can be used from middle finishing to final finishing, achieving a reduction in machining time.

Volume Discount

TS
High-Hardness Steel
4 Flutes

Select to compare

Configure now
Starting from^∗ ：	61.48 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide radius end mill, 3-flute, 45° spiral / short model

MISUMI

[Features]
-The 3-flute shape makes it resistant to chatter and can smoothly transition from grooving to slot milling
-Unique chip channel shape enables slot milling with a depth of cut equivalent to 2 flutes
-Comparable to 30° helix angle square cutters, both rotation and feed are more than twice as fast
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
3 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide radius end mill, 2-flute / regular model

MISUMI

[Features]
General 2-flute cutter with regular flute length and flute radius
-Radius cutting edge also effectively suppresses chipping
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
2 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide radius end mill, 4-flute / stub model

MISUMI

[Features]
-Short cutting edge length with cutting edge radius fitted to a general purpose 4 flute cutter
-Radius cutting edge is also effective in suppressing chipping
-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, prices, etc.

Volume Discount

TS
General Steel
4 Flutes
B (Stub)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide long neck radius end mill, 2-flute, long neck model

MISUMI

Long neck radius that can be used as a ball and allows a large pick feed

Volume Discount

TS
General Steel
2 Flutes

Select to compare

Configure now
Min. Shipping Days ：	5 Days

Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill

MISUMI

[Features]
-Alteration cutter that can determine the radius of the carbide cutter in 0.1 mm increments
-Can be reground. Please refer to the "Regrinding service" page for information on possible applications, range of services, prices, etc.

Non-Coated
General Steel

Select to compare

Configure now
Min. Shipping Days ：	7 Days

DLC Mill, Radius 2DLCM-R

NACHI(FUJIKOSHI)

End-mill for aluminum and copper alloys. R part processing of corner of the groove is possible.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	83.54 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

CBN End MILL (Small-Diameter, 2-Flute, Corner Radius End Mill) CBN-SXR

OSG

The three-dimensional negative shape of the R-profile provides both sharpness and rigidity, and the effect of the spiral blade suppresses fluctuations in cutting force, enabling high-precision side milling.

Select to compare

Configure now
Starting from^∗ ：	101.29 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

End Mill with 2 Carbide Flutes and Corner Radius KSRA-2

KYOWA SEIKO

[Features] It can be used for flat surface machining, side machining, curved surface machining, grooving and angular cutting. [Features] By using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	108.75 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

SPEED / T 4 Flute Anti-Vibration Radius

SPEED TIGER

[Features]
· Supports high speed processing and large cutting depth with vibration prevention effects due to core thickness change.
· Total length of 100 mm and inexpensive so that it's easy to use.

Select to compare

Configure now
Starting from^∗ ：	49.41 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

WATERMILLS ® End Mill for Aluminum WR345 3-Flute High-Helix AL R345, No Coating

WATERMILLS

[Features]
· Strong torsion.

Select to compare

Configure now
Starting from^∗ ：	62.73 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model

MISUMI

Achieves high efficiency machining using the high feed. The 3-flute structure suppresses the occurrence of chattering

Volume Discount

TS
High-Hardness Steel
3 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	117.55 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model

MISUMI

[Features]
-Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when bottom face is milled, enabling high-speed feed (2) Minimizing cusp height (uncut part) during contour milling reduces the number of average finishing operations
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
High-Hardness Steel
4 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	111.66 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model

MISUMI

[Features]
-Combined corner radius shape of shoulder R and bottom R, (1) cutting chips are thin when bottom face is milled, enabling high-speed feed (2) minimizing cusp height (uncut part) during contour milling reduces the number of middle finishing operations
-Long neck type, which avoids tool interference, achieves high efficiency even when milling deep cavities.

Volume Discount

TS
High-Hardness Steel
4 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	93.03 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide radius end mill, 4-flute / stub model

MISUMI

A high precision radius end mill for shrink fit holder. Achieves high accuracy and high efficiency machining

Volume Discount

TS
General Steel
4 Flutes
B (Stub)

Select to compare

Configure now
Starting from^∗ ：	57.32 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model

MISUMI

[Features]
-High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining
-Uses a 3-bladed shape that is resistant to chatter, so that plunge machining is possible
-Using stitch grooves that are the same length as the cutting diameter, it is possible to machine the bottom surface while suppressing chatter
-Multi-use for engraving, side face, rough and medium grinding.

Volume Discount

TS
High-Hardness Steel
3 Flutes
B (Stub)

Select to compare

Configure now
Starting from^∗ ：	84.39 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model

MISUMI

[Features]
-High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining
-Uses a 3-bladed shape that is resistant to chatter, allowing plunge-cut machining
-Multi-faceted type that can be used for engraving, side face, rough and medium grinding
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Volume Discount

TS
High-Hardness Steel
3 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	79.89 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model

MISUMI

[Features]
-High rigidity and cutting sharpness are achieved by the combination of negative cutting edge radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining
-Using stitch grooves that have the same groove length as the cutting edge diameter, it is possible to machine the bottom surface while suppressing chatter
-Multi-purpose for engraving, side face, rough and medium finishing
-Can be resharpened. Please refer to the "Regrinding Service" page for information on application methods, range of services, prices, etc.

Volume Discount

TS
High-Hardness Steel
4 Flutes
B (Stub)

Select to compare

Configure now
Starting from^∗ ：	54.32 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model

MISUMI

[Features]
-High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining
-Variable design that can be used for engraving, side faces, coarse and medium finish
-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the machine, what services it offers, prices, etc.

Volume Discount

TS
High-Hardness Steel
4 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	74.55 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model

MISUMI

Long neck type with interference prevention can be selected from a number of effective lengths

Volume Discount

TS
High-Hardness Steel
4 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	88.68 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model

MISUMI

[Features]
-Designed with optimum blade, shank and overall length taking into account machining with shrink fit holders
-Unique chip groove shape allows grooving with a depth of cut equivalent to that of 2 cutting edges
-Comparable to square cutters with 30° helix angle, both rotation and feed are more than twice as fast
-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services they offer, pricing, etc.

Volume Discount

TS
General Steel
3 Flutes
B (Stub)

Select to compare

Configure now
Starting from^∗ ：	73.40 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model

MISUMI

[Features]
-Designed with optimum blade, shank and overall length taking into account machining with shrink fit holders
-Unique chip groove shape allows cutting grooves with a depth of cut equal to that of 2 cutting edges
-Comparable to square cutters with 30° helix angle, both rotation and feed are more than twice as fast
-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services they offer, pricing, etc.

Volume Discount

TS
General Steel
4 Flutes
B (Stub)

Select to compare

Configure now
Starting from^∗ ：	78.99 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide radius end mill, 3-flute, 45° spiral / stub model

MISUMI

[Features]
-Unique chip shape allows flute cutting with a depth of cut equal to that of 2 cutting edges
-Comparable to square end mills with 30° helix angle, both rotation and feed are more than twice as fast
-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services they offer, pricing, etc.

Volume Discount

TS
General Steel
3 Flutes
B (Stub)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide radius end mill, 3-flute, 45° spiral / regular model

MISUMI

[Features]
-Radius multi-function cutter
-The 3-flute shape makes it resistant to chatter and can be used continuously from plunging to grooving
-Unique chip groove shape allows grooving with a depth of cut equivalent to that of 2 flutes
-Compared to square cutters with 30° helix angle, both rotation and feed are more than twice as fast
-Radius flute is also effective in suppressing chips.

Volume Discount

TS
General Steel
3 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model

MISUMI

[Features]
-Unique chip groove shape allows cutting grooves with a depth of cut equal to that of 2 flutes
-The high cutting capacity makes it possible to work at a feed rate more than twice that of a standard cutter
-Long shank is ideal for milling deep cavities
-For ø7 and above, the shank diameter is thinner than the cutting diameter to avoid interference
-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, prices, etc.

Volume Discount

TS
General Steel
4 Flutes
S (Short)

Select to compare

Configure now
Starting from^∗ ：	73.62 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide radius end mill, 4-flute, 45° spiral / stub model

MISUMI

[Features]
-Radius end mill
-Unique shape of chip groove enables cutting of grooves with a depth of cut equal to that of 2 cutting edges
-Comparable to square end mills with 30° helix angle, both rotation and feed are more than twice as fast
-Radius cutting edge is also effective in suppressing chipping
-By adopting a throat length, which is 1.5 times longer than the cutting diameter, it is possible to machine the bottom surface and suppress chatter at the same time

Volume Discount

TS
General Steel
4 Flutes
B (Stub)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide radius end mill, 4-flute, 45° spiral / short model

MISUMI

[Features]
-Multi-function end mill with radius
-Unique chip groove shape allows cutting of grooves with a depth of cut equal to that of 2 flutes
-Comparable to square end mills with 30° helix angle, both rotation and feed are more than twice as fast
-Radius cutting edge is also effective in suppressing chipping
-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services it offers, prices, etc.

Volume Discount

TS
General Steel
4 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide radius end mill, 4-flute, 45°, regular model

MISUMI

[Features]
-Radius multi-function cutter
-Unique chip shape enables flute cutting with a depth of cut equal to that of 2 cutting edges
-Comparable to 30° helix angle square cutters, both rotation and feed are more than twice as fast
-Radius cutting edge also effectively suppresses chipping
-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services it offers, pricing, etc.

Volume Discount

TS
General Steel
4 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide radius end mill, 2-flute stub model

MISUMI

[Features]
-Stiffness-oriented design with optimum blade, shank and overall length taking into account processing with shrink fit holder
-Regrindable. Please refer to the "Regrinding Service" page for application procedures, scope of services, prices, etc.

Volume Discount

TS
General Steel
2 Flutes
B (Stub)

Select to compare

Configure now
Starting from^∗ ：	36.28 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model

MISUMI

[Features]
-Short cutting edge length with cutting edge radius attached to the 2-flute general purpose cutters
-Radius cutting edge is also effective in suppressing chipping
-Can be reground. Please refer to the "Regrinding Service" page for application information, scope of service, pricing, etc.

Volume Discount

TS
General Steel
2 Flutes
B (Stub)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide radius end mill, 2-flute / short model

MISUMI

Volume Discount

TS
General Steel
2 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide radius end mill, 4-flute / stub model

MISUMI

[Features]
-Designed with optimum blade length, shank length and overall length considering processing with shrink holder
-Can be resharpened. Please refer to the "Regrinding Service" page for information on possible applications, range of services, prices, etc.

Volume Discount

TS
General Steel
4 Flutes
B (Stub)

Select to compare

Configure now
Starting from^∗ ：	43.32 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide radius end mill, 4-flute / short model

MISUMI

[Features]
-Short cutting edge length with cutting edge radius attached to a general purpose cutter with 4 cutting edges
-Radius cutting edge is also effective in suppressing chipping
-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, prices, etc.

Volume Discount

TS
General Steel
4 Flutes
S (Short)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide radius end mill, 4-flute / regular model

MISUMI

[Features]
-Regular cutting edge length with cutting edge radius fitted to a general purpose cutter with 4 cutting edges
-Radius cutting edge is also effective in suppressing chipping
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
4 Flutes
R (Regular)

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide long neck radius end mill, 2-flute, 45° spiral / long neck model

MISUMI

[Features]
-Multi-functional long neck radius with high feed rate and excellent durability
-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
3 Flutes

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide long neck radius end mill, 4-flute / long neck model

MISUMI

[Features]
-Radius (R)-accuracy of ±5 µm (compared to manufacturer's measurements) enables high-precision milling of deep cavities
-By adopting 4-spiral shape, it is possible to work with high feed setting compared to 2-spiral shape
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
4 Flutes

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model

MISUMI

[Features]
-Suppresses chattering with a short flute length and a tapered shape at the peripheral edge
-It has a coating with high oxidation resistance and high hardness, and achieves a long service life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
2 Flutes

Select to compare

Configure now
Min. Shipping Days ：	5 Days

TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model

MISUMI

By the adoption of 3-blade shape and tapered neck, chattering is suppressed in deep engraving

Volume Discount

TS
High-Hardness Steel
3 Flutes
B (Stub)

Select to compare

Configure now
Starting from^∗ ：	83.63 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TSC series carbide radius end mill, 4-flute, 45° spiral, stub / tapered neck model

MISUMI

[Features]
-High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining
-Conical neck effectively suppresses chatter
-Variable design that can be used for engraving, side face, rough and medium grinding
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

Volume Discount

TS
High-Hardness Steel
4 Flutes
B (Stub)

Select to compare

Configure now
Starting from^∗ ：	97.30 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Specifications
Blade diameter (D)(φ)
R Size(mm)
work material
Blade length (ℓ)(mm)
Number of flutes(sheet)
Type
Overall Length (L)(mm)
Shank diameter (d)(mm)
Underneck length (ℓ1)(mm)
Machining Application
Coating
Torsion Angle (θ)
R Precision(μm)

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	SANKO MFG	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	OSG	KYOWA SEIKO	SPEED TIGER	WATERMILLS	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	HGGVRX HG Coated Carbide High Helix Radius	XAL series carbide radius end mill, 4-flute / short model	TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model	XAL series carbide radius end mill, 3-flute, 45° torsion / regular model	XAL series carbide radius end mill, 4-flute, 45° torsion / regular model	XAL series carbide radius end mill, 2-flute / short model	TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade	TSC series carbide radius end mill, 3-flute, 45° spiral / short model	TSC series carbide radius end mill, 2-flute / regular model	TSC series carbide radius end mill, 4-flute / stub model	TSC series carbide long neck radius end mill, 2-flute, long neck model	Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill	DLC Mill, Radius 2DLCM-R	CBN End MILL (Small-Diameter, 2-Flute, Corner Radius End Mill) CBN-SXR	End Mill with 2 Carbide Flutes and Corner Radius KSRA-2	SPEED / T 4 Flute Anti-Vibration Radius	WATERMILLS ® End Mill for Aluminum WR345 3-Flute High-Helix AL R345, No Coating	TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model	TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model	TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model	TSC series carbide radius end mill, 4-flute / stub model	TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model	TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model	TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model	TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model	TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model	TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model	TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model	TSC series carbide radius end mill, 3-flute, 45° spiral / stub model	TSC series carbide radius end mill, 3-flute, 45° spiral / regular model	TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model	TSC series carbide radius end mill, 4-flute, 45° spiral / stub model	TSC series carbide radius end mill, 4-flute, 45° spiral / short model	TSC series carbide radius end mill, 4-flute, 45°, regular model	TSC series carbide radius end mill, 2-flute stub model	TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model	TSC series carbide radius end mill, 2-flute / short model	TSC series carbide radius end mill, 4-flute / stub model	TSC series carbide radius end mill, 4-flute / short model	TSC series carbide radius end mill, 4-flute / regular model	TSC series carbide long neck radius end mill, 2-flute, 45° spiral / long neck model	TSC series carbide long neck radius end mill, 4-flute / long neck model	TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model	TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model	TSC series carbide radius end mill, 4-flute, 45° spiral, stub / tapered neck model
Starting from^∗	85.81 € *Unit price with basic configuration Volume Discount	18.89 € *Unit price with basic configuration Volume Discount	89.61 € *Unit price with basic configuration Volume Discount	23.73 € *Unit price with basic configuration Volume Discount	23.73 € *Unit price with basic configuration Volume Discount	14.52 € *Unit price with basic configuration Volume Discount	61.48 € *Unit price with basic configuration Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	-	83.54 € *Unit price with basic configuration Volume Discount	101.29 € *Unit price with basic configuration	108.75 € *Unit price with basic configuration Volume Discount	49.41 € *Unit price with basic configuration	62.73 € *Unit price with basic configuration	117.55 € *Unit price with basic configuration Volume Discount	111.66 € *Unit price with basic configuration Volume Discount	93.03 € *Unit price with basic configuration Volume Discount	57.32 € *Unit price with basic configuration Volume Discount	84.39 € *Unit price with basic configuration Volume Discount	79.89 € *Unit price with basic configuration Volume Discount	54.32 € *Unit price with basic configuration Volume Discount	74.55 € *Unit price with basic configuration Volume Discount	88.68 € *Unit price with basic configuration Volume Discount	73.40 € *Unit price with basic configuration Volume Discount	78.99 € *Unit price with basic configuration Volume Discount	- Volume Discount	- Volume Discount	73.62 € *Unit price with basic configuration Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	36.28 € *Unit price with basic configuration Volume Discount	- Volume Discount	- Volume Discount	43.32 € *Unit price with basic configuration Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	- Volume Discount	83.63 € *Unit price with basic configuration Volume Discount	97.30 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	8 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	7 Days	6 Days	6 Days	8 Days	7 Days	7 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days
Specifications		XAL General Steel 4 Flutes	TS High-Hardness Steel 3 Flutes S (Short)	XAL General Steel 3 Flutes	XAL General Steel 4 Flutes	XAL General Steel 2 Flutes	TS High-Hardness Steel 4 Flutes	TS General Steel 3 Flutes S (Short)	TS General Steel 2 Flutes R (Regular)	TS General Steel 4 Flutes B (Stub)	TS General Steel 2 Flutes	Non-Coated General Steel						TS High-Hardness Steel 3 Flutes S (Short)	TS High-Hardness Steel 4 Flutes S (Short)	TS High-Hardness Steel 4 Flutes S (Short)	TS General Steel 4 Flutes B (Stub)	TS High-Hardness Steel 3 Flutes B (Stub)	TS High-Hardness Steel 3 Flutes S (Short)	TS High-Hardness Steel 4 Flutes B (Stub)	TS High-Hardness Steel 4 Flutes S (Short)	TS High-Hardness Steel 4 Flutes S (Short)	TS General Steel 3 Flutes B (Stub)	TS General Steel 4 Flutes B (Stub)	TS General Steel 3 Flutes B (Stub)	TS General Steel 3 Flutes R (Regular)	TS General Steel 4 Flutes S (Short)	TS General Steel 4 Flutes B (Stub)	TS General Steel 4 Flutes S (Short)	TS General Steel 4 Flutes R (Regular)	TS General Steel 2 Flutes B (Stub)	TS General Steel 2 Flutes B (Stub)	TS General Steel 2 Flutes S (Short)	TS General Steel 4 Flutes B (Stub)	TS General Steel 4 Flutes S (Short)	TS General Steel 4 Flutes R (Regular)	TS General Steel 3 Flutes	TS General Steel 4 Flutes	TS General Steel 2 Flutes	TS High-Hardness Steel 3 Flutes B (Stub)	TS High-Hardness Steel 4 Flutes B (Stub)
Blade diameter (D)(φ)	4 ～ 25	3 ～ 20	4 ～ 12	3 ～ 12	4 ～ 12	1 ～ 12	3 ～ 12	3 ～ 12	1 ～ 20	1 ～ 12	0.2 ～ 6	1 ～ 20	2 ～ 20	0.5 ～ 3	0.5 ～ 3	6	3 ～ 20	4 ～ 12	4 ～ 20	4 ～ 12	2 ～ 6	2 ～ 12	2 ～ 12	2 ～ 12	2 ～ 20	4 ～ 16	3 ～ 12	3 ～ 12	3 ～ 12	3 ～ 20	3 ～ 22	3 ～ 12	3 ～ 20	3 ～ 20	2 ～ 12	1 ～ 12	1 ～ 20	2 ～ 12	1 ～ 12	1 ～ 12	1 ～ 4	1 ～ 6	0.2 ～ 3	3 ～ 12	3 ～ 12
R Size(mm)	0.5 ～ 3	0.1 ～ 3	0.813 ～ 2.438	0.2 ～ 2	0.2 ～ 2	0.1 ～ 3	0.75 ～ 3	0.3 ～ 2	0.1 ～ 3	0.1 ～ 3	0.05 ～ 1	0.1 ～ 3	0.2 ～ 3	0.05 ～ 0.5	-	2	0.3 ～ 4	0.813 ～ 2.438	0.813 ～ 2.607	0.813 ～ 2.438	0.2 ～ 0.5	0.5 ～ 2	0.5 ～ 2	0.5 ～ 2	0.5 ～ 3	1 ～ 3	0.3 ～ 1	0.3 ～ 1	0.5 ～ 1	0.2 ～ 2	0.2 ～ 2	0.5 ～ 1	0.2 ～ 3	0.2 ～ 3	0.2 ～ 3	0.1 ～ 3	0.1 ～ 3	0.3 ～ 1	0.1 ～ 3	0.1 ～ 3	0.2 ～ 1	0.05 ～ 1	0.05 ～ 0.5	0.8 ～ 2	0.8 ～ 2
work material	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○/◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]	Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[○/◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]
Blade length (ℓ)(mm)	9 ～ 56	8 ～ 38	8 ～ 24	16 ～ 38	18 ～ 38	3 ～ 30	1.2 ～ 5	5 ～ 26	3 ～ 60	1.5 ～ 18	0.16 ～ 12	4 ～ 60	6 ～ 38	0.3 ～ 1.8	1.5 ～ 10	15	12 ～ 50	8 ～ 24	8 ～ 40	8 ～ 24	3 ～ 9	2 ～ 12	4 ～ 24	2 ～ 12	4 ～ 40	6 ～ 24	4.5 ～ 18	4.5 ～ 18	4.5 ～ 18	5 ～ 56	4.5 ～ 30	4.5 ～ 18	5 ～ 38	5 ～ 56	3 ～ 18	1.5 ～ 18	2 ～ 40	3 ～ 18	2 ～ 24	3 ～ 36	0.8 ～ 3.2	1.5 ～ 12	0.16 ～ 6	4.5 ～ 18	4.5 ～ 18
Number of flutes(sheet)	4	4	3	3	4	2	4	3	2	4	2	2 ～ 4	2	2	2	4	3	3	4	4	4	3	3	4	4	4	3	4	3	3	4	4	4	4	2	2	2	4	4	4	3 ～ 4	4	2	3	4
Type	Radius	Radius	High-Feed Radius	Radius	Radius	Radius	High-Feed Radius	Radius	Radius	Radius	Long-Neck Radius	Radius	Radius	Radius	Radius	Long-Neck Radius	Radius	High-Feed Radius	High-Feed Radius	High-Feed Radius	Radius	High-Feed Radius	High-Feed Radius	High-Feed Radius	High-Feed Radius	Long-Neck Radius	Radius	Radius	Radius	Radius	Radius	Radius	Radius	Radius	Radius	Radius	Radius	Radius	Radius	Radius	Long-Neck Radius	Long-Neck Radius	Tapered neck radius	Tapered neck radius	Tapered neck radius
Overall Length (L)(mm)	50 ～ 140	50 ～ 100	80 ～ 160	60 ～ 100	60 ～ 100	50 ～ 75	60 ～ 110	60 ～ 100	45 ～ 125	40 ～ 75	40 ～ 100	40 ～ 125	40 ～ 100	45 ～ 50	60	100	39 ～ 104	50 ～ 100	50 ～ 150	80 ～ 160	50	50 ～ 100	50 ～ 100	50 ～ 100	50 ～ 130	70 ～ 180	40 ～ 65	40 ～ 65	60 ～ 100	60 ～ 130	80 ～ 200	60 ～ 100	60 ～ 110	60 ～ 130	35 ～ 60	40 ～ 75	40 ～ 110	35 ～ 60	40 ～ 75	45 ～ 85	45 ～ 70	40 ～ 100	40 ～ 100	80 ～ 160	80 ～ 160
Shank diameter (d)(mm)	4 ～ 25	4 ～ 20	6 ～ 12	6 ～ 12	6 ～ 12	4 ～ 12	6 ～ 12	6 ～ 12	4 ～ 20	4 ～ 12	4 ～ 6	4 ～ 20	4 ～ 20	4 ～ 6	3	6	3 ～ 20	6 ～ 12	6 ～ 20	6 ～ 12	6	4 ～ 12	4 ～ 12	4 ～ 12	4 ～ 20	4 ～ 16	6 ～ 12	6 ～ 12	6 ～ 12	6 ～ 20	6 ～ 20	6 ～ 12	6 ～ 20	6 ～ 20	4 ～ 12	4 ～ 12	4 ～ 20	4 ～ 12	4 ～ 12	4 ～ 12	4 ～ 6	4 ～ 6	4 ～ 6	6 ～ 16	6 ～ 16
Underneck length (ℓ1)(mm)	-	-	35 ～ 108	-	-	-	7.5 ～ 24	18 ～ 70	23 ～ 55	14 ～ 45	1 ～ 40	-	-	1.5 ～ 6	-	-	-	-	-	35 ～ 108	-	-	-	-	-	-	-	-	14 ～ 68	26 ～ 92	10 ～ 18	14 ～ 68	18 ～ 73	26 ～ 92	-	14 ～ 45	17 ～ 45	-	17 ～ 45	23 ～ 55	6 ～ 30	3 ～ 40	1 ～ 60	24 ～ 105	24 ～ 105
Machining Application	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts	Inclined Cuts
Coating	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group) / Non-Coated	DLC	-	TiAlN	AlTiN	Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)
Torsion Angle (θ)	High Helix (45˚ to 60˚)	Standard Helix (30˚ to 40˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	Standard Helix (30˚ to 40˚)	No torsion	High Helix (45˚ to 60˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	-	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	Standard Helix (30˚ to 40˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	High Helix (45˚ to 60˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	High Helix (45˚ to 60˚)	High Helix (45˚ to 60˚)
R Precision(μm)	0～+0.04	±0.02	-	±0.02	±0.02	±0.02	±0.02	±0.01	±0.01 ～ ±0.02	±0.01 ～ ±0.02	±0.005 ～ ±0.01	±0.02	-0.032～-0.059 ～ -0.014～-0.028	-	-	±0.01	-	-	-	-	±0.005	±0.015	±0.015	±0.015	±0.015	±0.015	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01 ～ ±0.02	±0.01 ～ ±0.02	±0.02	±0.01 ～ ±0.02	±0.01 ～ ±0.02	±0.005 ～ ±0.01	±0.005 ～ ±0.01	±0.005 ～ ±0.01	±0.02	±0.02

Filter by:

Blade diameter (D)(φ)
0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1

1.2

1.4

1.5

1.6

1.8

2

2　

2.5

2.8

3

3　

3.5

4

4　

4.5

5

5　

5.5

6

7

8

8　

9

10

10　

11

12

12　

13

14

16

17

18

20

22

25
Drawing

Clear

R Size(mm)
R0

0.02

0.03

0.05

0.1

0.15

0.2

0.25

0.3

0.4

0.5

0.6

0.7

0.75

0.76

0.8

0.813

0.9

1

R1

1.1

1.2

1.219

1.3

1.4

1.5

R1.5

1.6

1.625

1.7

1.8

1.9

2

R2

2.031

2.1

2.2

2.3

2.4

2.438

2.465

2.5

R2.5

2.6

2.607

2.7

2.8

2.9

3

R3

3.05

3.2

3.5

4

R4

5

R5

6

R6

6.35

6.5

8
[0.1-3/0.1mm Unit(s)]
Drawing

Clear

work material
- General Steel
- Quenched and tempered steel
- High Hardness Steel: to HRC55
- High Hardness Steel: to HRC60
- High Hardness Steel: to HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear

Blade length (ℓ)(mm)
0.08

0.13

0.15

0.16

0.2

0.24

0.25

0.28

0.3

0.32

0.4

0.48

0.5

0.55

0.56

0.6

0.64

0.65

0.7

0.72

0.75

0.8

0.9

0.96

1

1.2

1.44

1.5

1.6

1.8

2

2.1

2.2

2.25

2.3

2.4

2.5

2.7

3

3　

3.2

3.5

3.7

4

4　

4.5

4.8

5

5　

5.25

5.5

5.6

6

6　

6.75

7

7.5

8

8.25

8.4

9

10

10　

10.5

11

12

12　

12.5

13

13.5

14

15

15　

16

16.5

17

17.5

18

19

19.5

20

21

22

24

25

25.5

26

27

28

30

32

33

34

35

36

37.5

38

40

42

45

48

50

55

56

60

64

75

80

100
[5-56/1mm Unit(s)]
Drawing

Clear

Number of flutes(sheet)
2

3

4

5

6

8
Drawing

Clear

Type
- Radius
- High-Feed Radius
- Long-Neck Radius
- Tapered neck radius
Clear

Overall Length (L)(mm)
32

34

35

38

39

40

45

48

49

50

51

52

53

55

57

58

60

62

63

64

65

68

70

72

74

75

80

83

85

86

88.90

90

92

95

100

104

105

110

115

120

121

125

130

135

140

145

150

160

170

175

180

185

190

200

220

230
Drawing

Clear

Shank diameter (d)(mm)
3

4

5

5.8

6

7.8

8

9.8

10

11

12

13

14

15

16

17

18

20

25
Drawing

Clear

Underneck length (ℓ1)(mm)
0.20

0.5

1

1.5

1.60

1.8

2

2.4

2.5

3

3.5

3.8

4

4.5

5

6

7

7.5

8

9

10

11

12

12.35

12.5

13

14

14.35

15

16

16.65

18

19

20

21

22

24

25

26

27

28

29

30

32

32.1

32.6

33.6

34

34.6

35

35.6

36

38

39

40

41.2

42

42.2

43.2

44

44.2

45

45.2

46.5

48

50

54

55

56

60

60.3

60.8

61.3

62.3

63.3

64

64.3

65

66

70

72

75

80

80.4

81.4

82

82.4

84

85

90

92.9

95

100

102

105

108

110

120

120.6

121.6

122.6

125

140

160

160.8

-
[8-92/1mm Unit(s)]
Drawing

Clear

Machining Application
- Plane
- Side
- Curved surface
- Groove
- Plunging (Z feed)
- Inclined Cuts
Images

Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- DLC
- Dia Coat
- Non-Coated
- AlTiN
- Other
Details

Clear

Torsion Angle (θ)
- No torsion
- Weak torsion (15˚ to 25˚)
- Standard Helix (30˚ to 40˚)
- High Helix (45˚ to 60˚)
- Other
Clear

R Precision(μm)
-0.032～-0.059

-0.025～-0.047

-0.020～-0.038

-0.014～-0.028

-0.005 to 0.005

0～-20

0～-0.05

0～-0.030

0～-0.015

0～-0.01

0～+0.04

±0.005

0.005 to -0.005

0.005～-0.005

±0.01

0.01 to -0.01

0.01～-0.01

±0.015

0.015～-0.015

±0.02

0.02～-0.02

0.025～-0.025

±0.03

±0.05

±10

±15

±20
Drawing

Clear

Brand

- MISUMI (55)
- Cost Efficient Products ()
- KYOWA SEIKO (12)
- SANKO MFG (4)
- OSG (3)
- NACHI(FUJIKOSHI) (1)
- SPEED TIGER (1)
- WATERMILLS (1)
- OKAZAKI SEIKO (0)
- DIJET (0)
- SANDVIK (0)
- ATOM (0)
- UNION TOOL (0)
- VAN_HOORN (0)
- NS TOOL (0)
- TAIYO-TOOL (0)
- 7 LEADERS (0)
- THE CUT (0)
- GUHRING (0)
Clear