Rejestracja
Kategoria
Zobacz więcej
Warunki filtrowania

Wyczyść wszystko

  • Stan magazynowy
  • Blade diameter (D)(φ)
  • R Size(mm)
    [0.1–3/0.1mm jedn.]
  • work material
  • Blade length (ℓ)(mm)
    [5–56/1mm jedn.]
  • Number of flutes(sheet)
  • Type
  • Producent

    • Carbide Radius End Mills (Machining Application: Groove)

    Liczba pozycji: 91
    * Informacje o dniach wysyłki, kosztach wysyłki i cenach.
    Lista
    Zdjęcie
    Porównaj specyfikacje
  • 1
  • 2
  • 3
  • Dalej
    • CoroMill Plura, Carbide Corner Radius End Mill, Center-Cut
      • Volume Discount

      SANDVIK

      CoroMill Plura, Carbide Corner Radius End Mill, Center-Cut

      Unique shape exhibits high performance
      Czytaj dalej
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      2 ～ 160.2 ～ 3General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel: to HRC60[○]2 ～ 162 ～ 4Radius / Long-Neck Radius57 ～ 1506 ～ 164 ～ 42
      Cena (bez VAT) od:
      105.98 €～
      Standardowa data wysyłki:
      6 dni robocze
      Konfiguruj
    • HLRS2000 HM Coated 2 Flute Long-Neck Radius
      • ZNIŻKA
      • Volume Discount

      UNION TOOL

      HLRS2000 HM Coated 2 Flute Long-Neck Radius

      [Features]· Long neck radius shape that exhibits power in high-performance and high-quality machining· Capable of cutting everything from raw materials to high-hardness materials· Capable of stable, long-life machining for both dry and wet type
      Czytaj dalej
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      0.4 ～ 60.05 ～ 1General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎]0.4 ～ 62Long-Neck Radius50 ～ 1204 ～ 61 ～ 60
      Cena (bez VAT) od:
      43.45 €～
      Cena (bez VAT) od:
      Cena specjalna
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • VAC Series Carbide 4-Flute Uneven Lead Radius End Mill
      • Volume Discount

      MISUMI

      VAC Series Carbide 4-Flute Uneven Lead Radius End Mill

      [Features] -Suppresses chatter in uneven pitch and uneven flutes-Stable machining is possible while maintaining finished surface accuracy-Cutting edge radius also enhances cutting edge rigidity-Can machine heat treated steel up to 50HRC-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
      Czytaj dalej
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1.5 ～ 120.2 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]4 ～ 304Radius50 ～ 1506 ～ 12-
      Cena (bez VAT) od:
      49.28 €～
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • Carbide Radius End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model
      • Volume Discount
      • Non-Coated
      • Aluminum
      • 3 Flutes

      MISUMI

      Carbide Radius End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model

      Comes with the rounded edge that suppresses machining streaks in standing-wall multi-stage machining
      Czytaj dalej
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      5 ～ 220.5 ～ 2Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]9 ～ 333Radius80 ～ 2004 ～ 20-
      Cena (bez VAT) od:
      109.63 €～
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • TSC Series Carbide Uneven Lead 4-Flute Radius End Mill
      • Volume Discount

      MISUMI

      TSC Series Carbide Uneven Lead 4-Flute Radius End Mill

      Introducing the long-awaited unequal lead 4-flute radius end mill in the TSC series (helix angle of 40° / 43°)
      Czytaj dalej
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      2 ～ 250.2 ～ 6.5General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]4 ～ 504Radius50 ～ 1206 ～ 25-
      Cena (bez VAT) od:
      47.37 €～
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • VAC Series Carbide 2-Flute Radius End Mill
      • Volume Discount

      MISUMI

      VAC Series Carbide 2-Flute Radius End Mill

      [Features] -Cutting edge radius also reinforced cutting edge rigid-Ultra-fine particle carbide base material and coating with excellent adhesion and heat resistance are adopted-Can handle heat treated steel up to 50HRC-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
      Czytaj dalej
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 120.1 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]2.5 ～ 302Radius50 ～ 1306 ～ 12-
      Cena (bez VAT) od:
      49.28 €～
      Standardowa data wysyłki:
      5 dni robocze
      Konfiguruj
    • MSRS230 MUGEN-COATING 2-Flute Radius End Mill
      • ZNIŻKA
      • Volume Discount

      NS TOOL

      MSRS230 MUGEN-COATING 2-Flute Radius End Mill

      Straight and corner rounding processing can be performed at the same time.
      Czytaj dalej
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      1 ～ 50.1 ～ 1.5General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]2 ～ 102Radius60 ～ 704 ～ 6-
      Cena (bez VAT) od:
      67.97 €～
      Cena (bez VAT) od:
      Cena specjalna
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • MHR230R MUGEN-COATING 2-Flute Long Neck Radius End Mill
      • ZNIŻKA
      • Volume Discount

      NS TOOL

      MHR230R MUGEN-COATING 2-Flute Long Neck Radius End Mill

      The tuned Infinity coating is effective for machining quenched and tempered steel, making it ideal for processing copper electrodes
      Czytaj dalej
      Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
      0.2 ～ 60.05 ～ 1General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]0.15 ～ 92Long-Neck Radius45 ～ 1104 ～ 60.5 ～ 48
      Cena (bez VAT) od:
      44.13 €～
      Cena (bez VAT) od:
      Cena specjalna
      Standardowa data wysyłki:
      Towar dostępny w magazynie: 1 dzień roboczy
      Niektóre pozycje mogą zostać wysłane tego samego dnia
      Konfiguruj
    • PCD End Mill with 2 Flutes and Corner Radius for Carbide Machining DCRE-2

        KYOWA SEIKO

        PCD End Mill with 2 Flutes and Corner Radius for Carbide Machining DCRE-2

        [Specifications]· Shape: Radius End Mill (carbide)· Material: PCD Polycrystalline Diamond· Work materials: For carbide alloy machining[Applications] Flat Surfaces / Side Surfaces / Curved Surfaces / Grooves / Inclined Cutting
        Czytaj dalej
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        0.5 ～ 2--0.5 ～ 1.52Radius504-
        Cena (bez VAT) od:
        671.80 €～
        Standardowa data wysyłki:
        8 dni robocze
        Konfiguruj
      • End Mill with 2 Carbide Flutes and Corner Radius KSRA-2
        • Volume Discount

        KYOWA SEIKO

        End Mill with 2 Carbide Flutes and Corner Radius KSRA-2

        [Features] It can be used for flat surface machining, side machining, curved surface machining, grooving and angular cutting. [Features] By using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.
        Czytaj dalej
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        0.5 ～ 3-General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]1.5 ～ 102Radius603-
        Cena (bez VAT) od:
        108.75 €～
        Standardowa data wysyłki:
        8 dni robocze
        Konfiguruj
      • TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model
        • Volume Discount
        • TS
        • High-Hardness Steel
        • 3 Flutes
        • S (Short)

        MISUMI

        TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model

        Achieves high efficiency machining using the high feed. The 3-flute structure suppresses the occurrence of chattering
        Czytaj dalej
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        4 ～ 120.813 ～ 2.438General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]8 ～ 243High-Feed Radius50 ～ 1006 ～ 12-
        Cena (bez VAT) od:
        122.52 €～
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model
        • Volume Discount
        • TS
        • High-Hardness Steel
        • 3 Flutes
        • S (Short)

        MISUMI

        TSC series carbide composite radius end mill, for high-feed machining, 3-flute, 45° spiral / short model

        [Features] -Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, which enables high-speed feed (2) Minimizing cusp height (unmachined part) when contour milling reduces the number of middle finishing operations-Long neck type, which avoids tool interference, achieves high efficiency even when milling deep cavities-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
        Czytaj dalej
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        4 ～ 120.813 ～ 2.438General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]8 ～ 243High-Feed Radius80 ～ 1606 ～ 1235 ～ 108
        Cena (bez VAT) od:
        93.37 €～
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • XAL series carbide radius end mill, 3-flute, 45° torsion / regular model
        • Volume Discount
        • XAL
        • General Steel
        • 3 Flutes

        MISUMI

        XAL series carbide radius end mill, 3-flute, 45° torsion / regular model

        3-flute 45° helix radius that's resistant to chattering is available at an affordable price
        Czytaj dalej
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        3 ～ 120.2 ～ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]16 ～ 383Radius60 ～ 1006 ～ 12-
        Cena (bez VAT) od:
        23.73 €～
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • XAL series carbide radius end mill, 2-flute / short model
        • Volume Discount
        • XAL
        • General Steel
        • 2 Flutes

        MISUMI

        XAL series carbide radius end mill, 2-flute / short model

        Radius end mills are available at low prices
        Czytaj dalej
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        1 ～ 120.1 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]3 ～ 302Radius50 ～ 754 ～ 12-
        Cena (bez VAT) od:
        14.52 €～
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model
        • Volume Discount
        • TS
        • High-Hardness Steel
        • 3 Flutes
        • B (Stub)

        MISUMI

        TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model

        [Features] -High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining-Uses a 3-bladed shape that is resistant to chatter, so that plunge machining is possible-Using stitch grooves that are the same length as the cutting diameter, it is possible to machine the bottom surface while suppressing chatter-Multi-use for engraving, side face, rough and medium grinding.
        Czytaj dalej
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        2 ～ 120.5 ～ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]2 ～ 123High-Feed Radius50 ～ 1004 ～ 12-
        Cena (bez VAT) od:
        87.94 €～
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model
        • Volume Discount
        • TS
        • High-Hardness Steel
        • 3 Flutes
        • S (Short)

        MISUMI

        TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model

        [Features] -High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining-Uses a 3-bladed shape that is resistant to chatter, allowing plunge-cut machining-Multi-faceted type that can be used for engraving, side face, rough and medium grinding-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
        Czytaj dalej
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        2 ～ 120.5 ～ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]4 ～ 243High-Feed Radius50 ～ 1004 ～ 12-
        Cena (bez VAT) od:
        83.28 €～
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model
        • Volume Discount
        • TS
        • General Steel
        • 3 Flutes
        • B (Stub)

        MISUMI

        TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model

        [Features] -Designed with optimum blade, shank and overall length taking into account machining with shrink fit holders-Unique chip groove shape allows grooving with a depth of cut equivalent to that of 2 cutting edges-Comparable to square cutters with 30° helix angle, both rotation and feed are more than twice as fast-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services they offer, pricing, etc.
        Czytaj dalej
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        3 ～ 120.3 ～ 1General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]4.5 ～ 183Radius40 ～ 656 ～ 12-
        Cena (bez VAT) od:
        76.51 €～
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • TSC series carbide radius end mill, 3-flute, 45° spiral / stub model
        • Volume Discount
        • TS
        • General Steel
        • 3 Flutes
        • B (Stub)

        MISUMI

        TSC series carbide radius end mill, 3-flute, 45° spiral / stub model

        [Features] -Unique chip shape allows flute cutting with a depth of cut equal to that of 2 cutting edges-Comparable to square end mills with 30° helix angle, both rotation and feed are more than twice as fast-Can be reground. Please refer to the "Regrinding Service" page for details on how to use the cutter, what services they offer, pricing, etc.
        Czytaj dalej
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        3 ～ 120.5 ～ 1General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]4.5 ～ 183Radius60 ～ 1006 ～ 1214 ～ 68
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • TSC series carbide radius end mill, 3-flute, 45° spiral / short model
        • Volume Discount
        • TS
        • General Steel
        • 3 Flutes
        • S (Short)

        MISUMI

        TSC series carbide radius end mill, 3-flute, 45° spiral / short model

        [Features] -The 3-flute shape makes it resistant to chatter and can smoothly transition from grooving to slot milling-Unique chip channel shape enables slot milling with a depth of cut equivalent to 2 flutes-Comparable to 30° helix angle square cutters, both rotation and feed are more than twice as fast-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
        Czytaj dalej
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        3 ～ 120.3 ～ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]5 ～ 263Radius60 ～ 1006 ～ 1218 ～ 70
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • TSC series carbide radius end mill, 3-flute, 45° spiral / regular model
        • Volume Discount
        • TS
        • General Steel
        • 3 Flutes
        • R (Regular)

        MISUMI

        TSC series carbide radius end mill, 3-flute, 45° spiral / regular model

        [Features] -Radius multi-function cutter-The 3-flute shape makes it resistant to chatter and can be used continuously from plunging to grooving-Unique chip groove shape allows grooving with a depth of cut equivalent to that of 2 flutes-Compared to square cutters with 30° helix angle, both rotation and feed are more than twice as fast-Radius flute is also effective in suppressing chips.
        Czytaj dalej
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        3 ～ 200.2 ～ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]5 ～ 563Radius60 ～ 1306 ～ 2026 ～ 92
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • TSC series carbide radius end mill, 2-flute stub model
        • Volume Discount
        • TS
        • General Steel
        • 2 Flutes
        • B (Stub)

        MISUMI

        TSC series carbide radius end mill, 2-flute stub model

        [Features] -Stiffness-oriented design with optimum blade, shank and overall length taking into account processing with shrink fit holder-Regrindable. Please refer to the "Regrinding Service" page for application procedures, scope of services, prices, etc.
        Czytaj dalej
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        2 ～ 120.2 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]3 ～ 182Radius35 ～ 604 ～ 12-
        Cena (bez VAT) od:
        34.89 €～
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model
        • Volume Discount
        • TS
        • General Steel
        • 2 Flutes
        • B (Stub)

        MISUMI

        TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model

        [Features] -Short cutting edge length with cutting edge radius attached to the 2-flute general purpose cutters-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for application information, scope of service, pricing, etc.
        Czytaj dalej
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        1 ～ 120.1 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]1.5 ～ 182Radius40 ～ 754 ～ 1214 ～ 45
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • TSC series carbide radius end mill, 2-flute / short model
        • Volume Discount
        • TS
        • General Steel
        • 2 Flutes
        • S (Short)

        MISUMI

        TSC series carbide radius end mill, 2-flute / short model

        [Features] -Short cutting edge length with cutting edge radius attached to the 2-flute general purpose cutters-Radius cutting edge is also effective in suppressing chipping-Can be reground. Please refer to the "Regrinding Service" page for application information, scope of service, pricing, etc.
        Czytaj dalej
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        1 ～ 200.1 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]2 ～ 402Radius40 ～ 1104 ～ 2017 ～ 45
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • TSC series carbide radius end mill, 2-flute / regular model
        • Volume Discount
        • TS
        • General Steel
        • 2 Flutes
        • R (Regular)

        MISUMI

        TSC series carbide radius end mill, 2-flute / regular model

        [Features]General 2-flute cutter with regular flute length and flute radius-Radius cutting edge also effectively suppresses chipping-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
        Czytaj dalej
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        1 ～ 200.1 ～ 3General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]3 ～ 602Radius45 ～ 1254 ～ 2023 ～ 55
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • TSC series carbide long neck radius end mill, 2-flute, long neck model
        • Volume Discount
        • TS
        • General Steel
        • 2 Flutes

        MISUMI

        TSC series carbide long neck radius end mill, 2-flute, long neck model

        Long neck radius that can be used as a ball and allows a large pick feed
        Czytaj dalej
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        0.2 ～ 60.05 ～ 1General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.16 ～ 122Long-Neck Radius40 ～ 1004 ～ 61 ～ 40
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • TSC series carbide long neck radius end mill, 2-flute, 45° spiral / long neck model
        • Volume Discount
        • TS
        • General Steel
        • 3 Flutes

        MISUMI

        TSC series carbide long neck radius end mill, 2-flute, 45° spiral / long neck model

        [Features] -Multi-functional long neck radius with high feed rate and excellent durability-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
        Czytaj dalej
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        1 ～ 40.2 ～ 1General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○/◎] / Cast Iron[○] / Aluminum[○] / Copper[○]0.8 ～ 3.23Long-Neck Radius45 ～ 704 ～ 66 ～ 30
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • TSC series carbide long neck radius end mill, 4-flute / long neck model
        • Volume Discount
        • TS
        • General Steel
        • 4 Flutes

        MISUMI

        TSC series carbide long neck radius end mill, 4-flute / long neck model

        [Features] -Radius (R)-accuracy of ±5 µm (compared to manufacturer's measurements) enables high-precision milling of deep cavities-By adopting 4-spiral shape, it is possible to work with high feed setting compared to 2-spiral shape-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
        Czytaj dalej
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        1 ～ 60.05 ～ 1General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]1.5 ～ 94Long-Neck Radius50 ～ 1004 ～ 63 ～ 40
        Cena (bez VAT) od:
        43.09 €～
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model
        • Volume Discount
        • TS
        • General Steel
        • 2 Flutes

        MISUMI

        TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model

        [Features] -Suppresses chattering with a short flute length and a tapered shape at the peripheral edge-It has a coating with high oxidation resistance and high hardness, and achieves a long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
        Czytaj dalej
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        0.2 ～ 30.05 ～ 0.5General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.16 ～ 62Tapered neck radius40 ～ 1004 ～ 61 ～ 60
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model
        • Volume Discount
        • TS
        • High-Hardness Steel
        • 3 Flutes
        • B (Stub)

        MISUMI

        TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model

        By the adoption of 3-blade shape and tapered neck, chattering is suppressed in deep engraving
        Czytaj dalej
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        3 ～ 120.8 ～ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]4.5 ～ 183Tapered neck radius80 ～ 1606 ～ 1624 ～ 105
        Cena (bez VAT) od:
        87.20 €～
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • TSC series carbide radius end mill, 3-flute, 45° spiral / short model
        • Volume Discount
        • TS
        • SUS
        • 3 Flutes
        • S (Short)

        MISUMI

        TSC series carbide radius end mill, 3-flute, 45° spiral / short model

        The popular radius type for stainless steel processing is also effective in preventing chipping
        Czytaj dalej
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        3 ～ 120.5 ～ 2General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]7 ～ 183Radius60 ～ 1006 ～ 12-
        Cena (bez VAT) od:
        93.25 €～
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • DLC Coated Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model
        • Volume Discount
        • DLC
        • Aluminum
        • 2 Flutes
        • R (Regular)

        MISUMI

        DLC Coated Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model

        In addition to the standard products, the radius can be selected extensively for manufactured products
        Czytaj dalej
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        2 ～ 120.2 ～ 1Aluminum[◎] / Copper[○] / Resin[○]5 ～ 362Radius40 ～ 804 ～ 1223 ～ 50
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • DLC Coated Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model
        • Volume Discount
        • DLC
        • Aluminum
        • 3 Flutes
        • R (Regular)

        MISUMI

        DLC Coated Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model

        The radius-equipped type prevents cutter marks and also shows effectiveness in improving the surface roughness
        Czytaj dalej
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        2 ～ 120.2 ～ 1Aluminum[◎] / Copper[○] / Resin[○]5 ～ 363Radius40 ～ 804 ～ 1223 ～ 50
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model
        • Volume Discount
        • Non-Coated
        • Aluminum
        • 2 Flutes
        • R (Regular)

        MISUMI

        Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model

        Non-coated manufactured products can be shipped on the 5th day in addition to the stocked products
        Czytaj dalej
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        2 ～ 120.2 ～ 1Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]5 ～ 362Radius40 ～ 804 ～ 1223 ～ 50
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model
        • Volume Discount
        • Non-Coated
        • Aluminum
        • 3 Flutes
        • R (Regular)

        MISUMI

        Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model

        Radius type that's also effective in preventing cutter marks
        Czytaj dalej
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        2 ～ 120.2 ～ 1Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]5 ～ 363Radius40 ～ 804 ～ 1223 ～ 50
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • Carbide Radius End Mill for Resin Machining, 2-Flute / Regular Model
        • Volume Discount
        • Non-Coated
        • Resin
        • 2 Flutes
        • R (Regular)

        MISUMI

        Carbide Radius End Mill for Resin Machining, 2-Flute / Regular Model

        Small radius type that prevents cutter marks on resin
        Czytaj dalej
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        1 ～ 100.2Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]3 ～ 302Radius50 ～ 803 ～ 10-
        Cena (bez VAT) od:
        44.46 €～
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model
        • Volume Discount
        • TS
        • High-Hardness Steel
        • 3 Flutes

        MISUMI

        TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model

        [Features] -High rigidity and cutting sharpness are achieved by the combination of negative blade radius, suitable core diameter and 45° helix angle, enabling highly efficient high feed machining-The long neck type is ideal for milling deep pockets, etc.-Multi-use for engraving, side faces, R, coarse and medium finish-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
        Czytaj dalej
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        4 ～ 121 ～ 2General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[○] / Stainless Steel[○] / Cast Iron[◎]8 ～ 243Long-Neck Radius70 ～ 1404 ～ 12-
        Cena (bez VAT) od:
        90.46 €～
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill
        • Non-Coated
        • General Steel

        MISUMI

        Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill

        [Features] -Alteration cutter that can determine the radius of the carbide cutter in 0.1 mm increments-Can be reground. Please refer to the "Regrinding service" page for information on possible applications, range of services, prices, etc.
        Czytaj dalej
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        2 ～ 200.1 ～ 3General Steel[◎] / Quenched and tempered steel[○/◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]4 ～ 602Radius40 ～ 1254 ～ 20-
        Standardowa data wysyłki:
        7 dni robocze
        Konfiguruj
      • XCP Coated Carbide Radius End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / Blade Length 2.5D Type / Regular Type
        • Volume Discount

        MISUMI

        XCP Coated Carbide Radius End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / Blade Length 2.5D Type / Regular Type

        · A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.· 45° radius end mill capable of high-speed and high-efficiency machining
        Czytaj dalej
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        4 ～ 120.2 ～ 1General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]18 ～ 384Radius60 ～ 1006 ～ 12-
        Cena (bez VAT) od:
        75.31 €～
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • VAC Series Carbide 2-Flute Long Neck Radius End Mill
        • Volume Discount

        MISUMI

        VAC Series Carbide 2-Flute Long Neck Radius End Mill

        [Features] -Effective for deep cutting due to long neck-Ultra-fine particle carbide base material and coating with excellent adhesion and heat resistance are adopted-Can handle heat treated steel up to 50HRC-Cutting edge radius also reinforced cutting edge stiff-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
        Czytaj dalej
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        0.4 ～ 120.1 ～ 1General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.6 ～ 18-Long-Neck Radius40 ～ 1004 ～ 122 ～ 50
        Cena (bez VAT) od:
        38.08 €～
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • VAC Series Carbide 4-Flute Uneven Lead Long Neck Radius End Mill
        • Volume Discount

        MISUMI

        VAC Series Carbide 4-Flute Uneven Lead Long Neck Radius End Mill

        [Features] -Effective for deep cutting due to long neck type-Ultra-fine particle carbide base material and coating with excellent adhesion and heat resistance are adopted-Can process heat treated steel up to 50HRC-Cutting edge radius also reinforced cutting edge rigid-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
        Czytaj dalej
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        1 ～ 120.2 ～ 1General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]1.5 ～ 304Long-Neck Radius50 ～ 1104 ～ 124 ～ 50
        Cena (bez VAT) od:
        40.28 €～
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • DLC Mill, Radius 2DLCM-R
        • Volume Discount

        NACHI(FUJIKOSHI)

        DLC Mill, Radius 2DLCM-R

        End-mill for aluminum and copper alloys. R part processing of corner of the groove is possible.
        Czytaj dalej
        Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
        30.2Aluminum[◎] / Copper[○]82Radius456-
        Cena (bez VAT) od:
        95.67 €
        Standardowa data wysyłki:
        6 dni robocze
        Konfiguruj
      • 2-Flute Corner R Short GX-CR-EDS-SF

          OSG

          2-Flute Corner R Short GX-CR-EDS-SF

          Mushroom shape super hard corner radius end mills developed for shrink fitting.
          Czytaj dalej
          Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
          12 ～ 160.5General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○]12 ～ 162Radius34 ～ 496 ～ 10-
          Cena (bez VAT) od:
          68.32 €～
          Standardowa data wysyłki:
          6 dni robocze
          Konfiguruj
        • 2-Flute, Corner R Short, CBN-CR-EDS

            OSG

            2-Flute, Corner R Short, CBN-CR-EDS

            2-flute CBN-CR-EDS with short corner radius-shows high performance in machining high-strength materials.
            Czytaj dalej
            Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
            3 ～ 60.2 ～ 2General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Cast Iron[○]3 ～ 62Radius45 ～ 506-
            Cena (bez VAT) od:
            187.96 €～
            Standardowa data wysyłki:
            6 dni robocze
            Konfiguruj
          • 2-Flute Corner R Short FX-CR-EDS-6

              OSG

              2-Flute Corner R Short FX-CR-EDS-6

              Corner Radius End Mill for high-speed machining that sufficiently exhibits performance of high-speed, high-precision machining center.
              Czytaj dalej
              Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
              0.5 ～ 2.50.1General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]0.7 ～ 3.72Radius5061.5 ～ 5
              Cena (bez VAT) od:
              65.64 €～
              Standardowa data wysyłki:
              6 dni robocze
              Konfiguruj
            • 2-Flute Corner R Short FX-CR-MG-EDS
              • Volume Discount

              OSG

              2-Flute Corner R Short FX-CR-MG-EDS

              Long shank type that can be used to process deep sections. Can also be used as a corner chipping prevention mechanism.
              Czytaj dalej
              Blade diameter (D)(φ)R Size(mm)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeOverall Length (L)(mm)Shank diameter (d)(mm)Underneck length (ℓ1)(mm)
              2 ～ 40.1 ～ 1General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]6 ～ 112Radius40 ～ 704 ～ 6-
              Cena (bez VAT) od:
              87.51 €～
              Standardowa data wysyłki:
              6 dni robocze
              Konfiguruj
          • 1
          • 2
          • 3
          • Dalej

            • Kategorie związane z Carbide Radius End Mills