Rejestracja

Tłumaczymy nasz sklep na język polski!

Wymaga to jednak czasu, ponieważ w ofercie mamy dużo artykułów, a na nasz sklep składa się wiele stron. Chwilowo nasz katalog produktów dostępny będzie w języku angielskim. Dziękujemy za cierpliwość!
Warunki filtrowania
  • Stan magazynowy
  • Type
  • Stroke(mm)
  • Table Material
    • Aluminum
  • Maximum load weight (when horizontally mounted)(kg)
  • Max. Load Mass(kg)
  • Table Size Length L(mm)
  • Cylinder Inner Diameter(Ø)
  • Rodless Cylinder Joint Type
  • Table Surface Treatment
    • Clear Anodize
  • Guide
    • Guideless
  • Table Size Width W(mm)
  • Table Size Height H(mm)
  • Operating Pressure(MPa)
  • Port Screw Type
  • Custom-made Specifications
  • Model
  • Stroke Adjustment Unit Symbol
  • End Block
  • Spacer for intermediate fixing
  • Spacer shipping form
  • Applicable inner diameter of cylinder(ø)
  • CAD
  • Szacowane dni wysyłki
    • Wszystko
    • W ciągu 4 dni robocze
    • W ciągu 5 dni robocze
    • W ciągu 7 dni robocze
    • W ciągu 8 dni robocze
    • W ciągu 12 dni robocze
    • W ciągu 24 dni robocze
    • W ciągu 25 dni robocze
    • W ciągu 28 dni robocze
    • W ciągu 29 dni robocze
    • W ciągu 30 dni robocze
  • Mechanically Jointed Rodless Cylinder, Basic Type, MY1B Series

    Przestroga

    • Product pictures are representations. CAD data is not supported by some of the model numbers.

    Numer części:

    Znaleziono następującą liczbę niepotwierdzonych proponowanych produktów: 1,648.
    Ilość:

    Informacje o produkcie

    Drawing

    Centralized piping type: ⌀10 (Cylinder inner diameter 10 mm)

    Dimensional drawing of MY1B10G-Stroke

    MY1B10G-stroke

    Standard type / centralized piping type ⌀16 (cylinder inner diameter 16 mm), ⌀20 (Cylinder inner diameter 20 mm)

    Dimensional drawing of MY1B16□/MY1B20□-Stroke

    MY1B16□ / MY1B20□-stroke

    Dimensional drawing of piping hole dimensions for bottom centralized piping of MY1B16□ / MY1B20 (right: bottom side piping (applicable O-ring))

    MY1B16□ / MY1B20 piping hole dimensions for centralized piping on the bottom (right: piping on the bottom (applicable O-ring))

    Standard type / centralized piping type ⌀50 (cylinder inner diameter 50 mm), ⌀63 (Cylinder inner diameter 63 mm)

    Dimensional drawing of MY1B50□/MY1B63□-Stroke

    MY1B50□ / MY1B63□-stroke

    Dimensional drawing of piping holes for centralized piping on the bottom of MY1B50□ / MY1B63□ (right: bottom side piping (applicable O-ring))

    Piping hole for centralized piping on the bottom of MY1B50□ / MY1B63□ (right: piping on the bottom (applicable O-ring))

    Standard type / centralized piping type ⌀80 (cylinder inner diameter 80 mm), ⌀100 (Cylinder inner diameter 100 mm)

    Dimensional drawing of MY1B80□/MY1B100□-Stroke

    MY1B80□ / MY1B100□-stroke

    Dimensional drawing of piping holes for centralized piping on the bottom of MY1B80□ / MY1B100□ (right: bottom side piping (applicable O-ring))

    Piping hole for centralized piping on the bottom of MY1B80□ / MY1B100□ (right: piping on the bottom (applicable O-ring))

    Product Specifications

    Product image of Mechanical Joint Type Rodless Cylinder, Basic Type MY1B Series

    Product Image

    Specifications

    Tube Inner Diameter (mm)101620506380100
    FluidAir
    Operation TypeDouble-acting type
    Operating Pressure Range0.2 to 0.8 MPa0.15 to 0.8 MPa0.1 to 0.8 MPa
    Proof Pressure1.2 MPa
    Ambient and fluid temperature5 to 60°C
    CushioningRubber cushionAir cushion
    LubricationNot required
    Stroke Length Tolerance1,000 or less (0 to +1.8)
    1,001 to 3,000 (0 to +2.8)
    2,700 or less (0 to +1.8)
    2,701 to 5,000 (0 to +2.8)
    Piping Connection Port DiameterFront/side portM5 × 0.8Rc 3/8RC 1/2
    Bottom port⌀4 (Connection diameter 4 mm)⌀10 (Connection diameter 10 mm)⌀18 (Connection diameter 18 mm)

    Piston Speed

    Tube Inner Diameter (mm)10162050 to 100
    No stroke adjustment unit100 to 500 mm/s100 to 1,000 mm/s
    Stroke adjustment unitA unit100 to 200 mm/s100 to 1,000 mm/sNote1)
    L unit, H unit100 to 1,000 mm/s100 to 1,500 mm/sNote2)

    Note 1) please note that the capacity of the air cushion will decrease as the stroke adjustment allowance by the adjust bolt increases.
    Meanwhile, in ranges exceeding the air cushion stroke, the working piston speed will become 100 to 200 mm/s.
    Note 2: The working piston speed will become 100 to 1,000 mm/s when using centralized piping.
    Note 3: Use at a speed within the range of the absorption capacity. Please refer to the catalog.

    Theoretical Output Table

    (Unit: N)

    Tube inner diameter
    (mm)
    Piston Area
    (mm2)
    Operating Pressure (MPa)
    0.20.30.40.50.60.70.8
    107815233139465462
    16200406080100120140160
    203146294125157188219251
    501,9623925887849811,1771,3731,569
    633,1156239341,2461,5571,8692,1802,492
    805,0241,0041,5072,0092,5123,0143,5164,019
    1007,8501,5702,3553,1403,9254,7105,4956,280

    Note) theoretical output (N) = pressure (MPa) x pressure receiving area (mm2).

    Weight Table

    (Unit: kg)

    Tube inner diameter
    (mm)
    Basic weightExtra weight
    Extra mass per hit
    Weight of Moving PartsSide support
    Bracket weight
    (Per pair)
    Stroke adjustment unit weight
    (Per unit)
    A/B typeA unit weightL unit weightH unit weight
    100.150.040.030.0030.010.02
    160.610.060.070.010.04
    201.060.100.140.020.050.050.10
    507.780.441.400.04
    6313.100.702.200.08
    8020.701.184.800.17
    10035.701.978.200.17

    Calculation method/example: MY1B20-300A

    • Basic weight: 1.06 kg
    • Cylinder Stroke: 300st
    • Extra weight: 0.10/50st
    • A unit weight: 1.76 kg

    1.06 + 0.10 × 300 ÷ 50 + 0.05 × 2 ≒ 2.17 kg

    Structural drawing of centralized piping type / MY1B10G

    Structural drawing of centralized piping type / MY1B10G

    Component parts table of centralized piping type/ MY1B10G

    Image 1 for components parts table of centralized piping type / MY1B10G
    Image 2 for components parts table of centralized piping type / MY1B10G

    Structural drawing of MY1B16, MY1B20, MY1B50 to MY1B100

    Structural drawing of MY1B16, MY1B20, MY1B50 to MY1B100

    MY1B16, MY1B20, MY1B50 to MY1B100 components

    Image 1 for components parts table of MY1B16, MY1B20, MY1B50 to MY1B100 components parts table
    Image 2 of MY1B16, MY1B20, MY1B50 to MY1B100 components

    Specification Table

    Standard type / centralized piping type ⌀16 (cylinder inner diameter 16 mm), ⌀20 (Cylinder inner diameter 20 mm)

    MY1B16□ / MY1B20□

    MY1B16□ / MY1B1620□ standard table image 1
    Image 2 of dimensional drawing table for MY1B16□/MY1B20
    MY1B16□ / MY1B20 bottom centralized piping piping hole standard table image

    Piping hole for bottom centralized piping

    * Please process the mounting surface with these dimensions.

    Standard type / centralized piping type ⌀50 (cylinder inner diameter 50 mm), ⌀63 (Cylinder inner diameter 63 mm)

    MY1B50□ / MY1B63□

    MY1B50□ / MY1B63□ standard table image 1
    MY1B50□ / MY1B63□ standard table image 2
    Image of piping hole standard table for bottom centralized piping of MY1B50□ / MY1B63□

    Piping hole for bottom centralized piping

    * Please process the mounting surface with these dimensions.

    Standard type / centralized piping type ⌀80 (cylinder inner diameter 80 mm), ⌀100 (Cylinder inner diameter 100 mm)

    MY1B80□ / MY1B100□

    MY1B80□ / MY1B100□ standard table image 1
    MY1B80□ / MY1B100□ standard table image 2
    MY1B80□ / MY1B100□ bottom centralized piping piping hole standard table image

    Piping hole for bottom centralized piping

    * Please process the mounting surface with these dimensions.

    Selection support information

    Model Number Notation

    Model number examples

    Model number examples

    Details of lead wire / connector specifications

    Lista numerów części

    Liczba pozycji

    Type

    Stroke

    (mm)

    Table Material

    Maximum load weight (when horizontally mounted)

    (kg)

    Max. Load Mass

    (kg)

    Table Size Length L

    (mm)

    Cylinder Inner Diameter

    (Ø)

    Rodless Cylinder Joint Type

    Usage Environment

    Table Surface Treatment

    Guide

    Table Size Width W

    (mm)

    Table Size Height H

    (mm)

    Operating Pressure

    (MPa)

    Piping Format

    Port Screw Type

    Cushion

    Number of Switches

    Custom-made Specifications

    End Block

    Model

    Stroke Adjustment Unit Symbol

    End Block

    Custom-made

    Spacer for intermediate fixing

    Spacer shipping form

    Type

    Applicable inner diameter of cylinder

    (ø)

    Minimalna wielkość zamówienia
    Rodless Cylinder
    230
    [Aluminum] Aluminum Alloy
    10~19
    15
    80
    16
    Mechanically Jointed
    Copper-Based / Fluorine-Based Material Not Used
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    30
    37
    0.15 to 0.8
    Standard type
    M screw
    Air cushion
    None
    -
    None
    -
    -
    A
    None
    -
    -
    Cylinder
    -
    1 szt.
    Rodless Cylinder
    50
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    0.2 to 0.8
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    None
    -
    -
    No unit
    None
    -
    -
    Cylinder
    -
    1 szt.
    Rodless Cylinder
    80
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    0.2 to 0.8
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    None
    -
    -
    No unit
    None
    -
    -
    Cylinder
    -
    1 szt.
    Rodless Cylinder
    100
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    No unit
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    1,000
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    No unit
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    1,000
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    A
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    1,000
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    H
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    100
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    A93
    0.5
    -
    2
    0.2 to 0.8
    No unit
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    100
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    A
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    100
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    A93
    0.5
    -
    2
    0.2 to 0.8
    A
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    100
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    A93
    3
    -
    2
    0.2 to 0.8
    A
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    100
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    AS
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    100
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    H
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    100
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    HS
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    1,050
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    No unit
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    105
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    A
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    1150
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    No unit
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    120
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    No unit
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    1,200
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    No unit
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    1,200
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    H
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    1,200
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    0.2 to 0.8
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    None
    -
    -
    HS
    None
    -
    -
    Cylinder
    -
    1 szt.
    Rodless Cylinder
    120
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    0.2 to 0.8
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    None
    -
    -
    A
    None
    -
    -
    Cylinder
    -
    1 szt.
    Rodless Cylinder
    120
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    AH
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    120
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    H
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    125
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    No unit
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    1250
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    No unit
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    125
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    A
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    130
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    No unit
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    130
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    A
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    130
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    H
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    134
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    H
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    135
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    No unit
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    1350
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    No unit
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    135
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    H
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    140
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    No unit
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    1400
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    No unit
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    150
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    No unit
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    150
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    A93
    0.5
    -
    2
    0.2 to 0.8
    No unit
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    150
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    0.2 to 0.8
    Centralized piping type
    M screw
    Rubber cushion
    M9N
    3
    None
    2
    -
    No unit
    None
    -
    -
    Cylinder
    -
    1 szt.
    Rodless Cylinder
    150
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    AS
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    1550
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    No unit
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    155
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    A
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    160
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    No unit
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    1600
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    No unit
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    1600
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    H
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    160
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    A
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    165
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    No unit
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    170
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    No unit
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    170
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    H
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    175
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    No unit
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    175
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    0.2 to 0.8
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    None
    -
    -
    H
    None
    -
    -
    Cylinder
    -
    1 szt.
    Rodless Cylinder
    176
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    No unit
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    180
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    No unit
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    1,800
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    0.2 to 0.8
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    None
    -
    -
    A
    None
    -
    -
    Cylinder
    -
    1 szt.
    Rodless Cylinder
    180
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    H
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    185
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    0.2 to 0.8
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    None
    -
    -
    No unit
    None
    -
    -
    Cylinder
    -
    1 szt.
    Rodless Cylinder
    190
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    AS
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    200
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    No unit
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    2,000
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    No unit
    None
    -
    -
    -
    -
    1 szt.
    Rodless Cylinder
    2,000
    [Aluminum] Aluminum Alloy
    5~9.2
    5
    50
    10
    Mechanically Jointed
    General Purpose
    [Clear Anodize] Hard Anodized Aluminum
    [Guideless] Basic Type
    24
    27
    -
    Centralized piping type
    M screw
    Rubber cushion
    None
    -
    -
    -
    0.2 to 0.8
    H
    None
    -
    -
    -
    -
    1 szt.
    Cena jednostkowa (bez VAT)(Cena jednostkowa z podatkiem)
    Standardowa data wysyłki
    280.52 €
    ( 333.82 € )
    28 dni robocze
    164.58 €
    ( 195.85 € )
    8 dni robocze
    246.87 €
    ( 293.78 € )
    8 dni robocze
    164.56 €
    ( 195.83 € )
    4 dni robocze
    227.18 €
    ( 270.34 € )
    8 dni robocze
    271.44 €
    ( 323.01 € )
    8 dni robocze
    351.98 €
    ( 418.86 € )
    8 dni robocze
    207.73 €
    ( 247.20 € )
    5 dni robocze
    295.58 €
    ( 351.74 € )
    8 dni robocze
    251.98 €
    ( 299.86 € )
    8 dni robocze
    257.40 €
    ( 306.31 € )
    8 dni robocze
    186.73 €
    ( 222.21 € )
    8 dni robocze
    384.18 €
    ( 457.17 € )
    8 dni robocze
    227.00 €
    ( 270.13 € )
    8 dni robocze
    241.06 €
    ( 286.86 € )
    8 dni robocze
    215.85 €
    ( 256.86 € )
    8 dni robocze
    241.03 €
    ( 286.83 € )
    8 dni robocze
    171.58 €
    ( 204.18 € )
    8 dni robocze
    241.06 €
    ( 286.86 € )
    8 dni robocze
    378.39 €
    ( 450.28 € )
    8 dni robocze
    303.47 €
    ( 361.13 € )
    8 dni robocze
    215.85 €
    ( 256.86 € )
    8 dni robocze
    256.11 €
    ( 304.77 € )
    7 dni robocze
    296.39 €
    ( 352.70 € )
    8 dni robocze
    171.58 €
    ( 204.18 € )
    8 dni robocze
    254.94 €
    ( 303.38 € )
    8 dni robocze
    215.85 €
    ( 256.86 € )
    8 dni robocze
    171.58 €
    ( 204.18 € )
    8 dni robocze
    215.85 €
    ( 256.86 € )
    8 dni robocze
    296.39 €
    ( 352.70 € )
    8 dni robocze
    296.39 €
    ( 352.70 € )
    7 dni robocze
    171.58 €
    ( 204.18 € )
    8 dni robocze
    254.94 €
    ( 303.38 € )
    8 dni robocze
    296.39 €
    ( 352.70 € )
    8 dni robocze
    171.58 €
    ( 204.18 € )
    8 dni robocze
    254.94 €
    ( 303.38 € )
    8 dni robocze
    171.58 €
    ( 204.18 € )
    8 dni robocze
    214.71 €
    ( 255.50 € )
    7 dni robocze
    246.42 €
    ( 293.24 € )
    7 dni robocze
    193.71 €
    ( 230.51 € )
    7 dni robocze
    269.06 €
    ( 320.18 € )
    8 dni robocze
    215.85 €
    ( 256.86 € )
    8 dni robocze
    171.58 €
    ( 204.18 € )
    8 dni robocze
    268.87 €
    ( 319.96 € )
    8 dni robocze
    393.68 €
    ( 468.48 € )
    8 dni robocze
    215.85 €
    ( 256.86 € )
    8 dni robocze
    171.58 €
    ( 204.18 € )
    8 dni robocze
    171.58 €
    ( 204.18 € )
    8 dni robocze
    296.39 €
    ( 352.70 € )
    8 dni robocze
    171.58 €
    ( 204.18 € )
    8 dni robocze
    296.39 €
    ( 352.70 € )
    8 dni robocze
    171.58 €
    ( 204.18 € )
    8 dni robocze
    171.58 €
    ( 204.18 € )
    8 dni robocze
    327.08 €
    ( 389.23 € )
    8 dni robocze
    296.39 €
    ( 352.70 € )
    8 dni robocze
    171.58 €
    ( 204.18 € )
    8 dni robocze
    193.73 €
    ( 230.54 € )
    8 dni robocze
    171.58 €
    ( 204.18 € )
    4 dni robocze
    296.69 €
    ( 353.06 € )
    8 dni robocze
    421.53 €
    ( 501.62 € )
    8 dni robocze

    Szczegółowe informacje

    Podstawowe informacje

    Air slide table made by SMC

    [Features]
    · Capable of being used in combination with various guides depending on the conditions
    · Simple, space-saving design without any guides
    · A wide variety is available from ø10 to ø100

    Przestroga

    • Product pictures are representations. CAD data is not supported by some of the model numbers.