Tłumaczymy nasz sklep na język polski!

Wymaga to jednak czasu, ponieważ w ofercie mamy dużo artykułów, a na nasz sklep składa się wiele stron. Chwilowo nasz katalog produktów dostępny będzie w języku angielskim. Dziękujemy za cierpliwość!

Strona główna MISUMI
Automation Components
Rotary Power Transmission
Shaft Couplings
Shaft Couplings
Claw pin couplings / grub screw clamping, hub clamping / pins: Nylon, PU / Body: aluminium

Warunki filtrowania

Allowable Torque Range(N•m)
Shaft Bore Dia. 1 d1 (or d)(mm)
- 15
- 16
- 18
- 20
- 24
- 28
- 30
- 35
- 40
Shaft Bore Dia. 2 d2 (or d)(mm)
- 15
- 16
- 18
- 20
- 24
- 28
- 30
- 35
- 40
O.D. D(mm)
- 55
- 70
- 95
Overall Length(mm)
- 60
- 75
- 100
Max. Rotational Speed Range(r/min)
Allowable Torque(Nm)
Calculation of the allowable torque (or the Safety Factor, etc.) differs depending on the manufacturer. For details, see the technical data provided by the relevant manufacturer.
- 20
- 40
- 80
- 120
- 180
Max. Rotational Speed(r/min)
- 4000
- 6000
- 8000
- 11000
Allowable Lateral Misalignment Range(mm)
- 0.02 to 0.2
- 0.21 to 0.40
Allowable Lateral Misalignment(mm)
- 0.1
- 0.15
- 0.3
- 0.4
Allowable Angular Misalignment(deg)
- 1
- 2
Buffer Part Material
- Polyurethane
- Nylon
Shaft Tightening Method
- Clamping
- Set Screws
Shaft I.D. d1 Change Hole Dia. [LDC] Specified in 1mm Increment
[15–40/1]
Shaft I.D. d2 Change Hole Dia. [RDC] Specified in 1mm Increment
[15–40/1]
Type
CAD
- 2D
- 3D
Szacowane dni wysyłki
- Wszystko
- W ciągu 9 dni robocze

MISUMI

Claw pin couplings / grub screw clamping, hub clamping / pins: Nylon, PU / Body: aluminium

Umieść kursor myszy nad ilustracją, aby ją powiększyć

KatalogS. 1-1097

Numer części:

Znaleziono następującą liczbę niepotwierdzonych proponowanych produktów: 48.

Rysunek konturowy i tabela specyfikacji
Lista numerów części
Szczegółowe informacje
Katalog

Rysunek konturowy i tabela specyfikacji

Back to the Category Shaft Couplings

Technical Drawing - Claw Couplings

Couplings/Jaw/Clamping Type:Related Image

Open the technical drawing in the new window

Available dimensions and tolerances can be found under the tab More information.

Basic Properties (e.g., material, hardness, coating, tolerance) - Claw Couplings

Type	Standard Bore	Material		Surface Treatment	Accessory
		Hub	Spacer	Hub
Set Screw	MMJN	Aluminum Diecast	Nylon (Black)	Electroless Nickel Plating	Set Screw
	MMJP		Polyurethane (Blue)
Clamping	MMJCN		Nylon (Black)		Hex Socket Head Cap Screw
	MMJCP		Polyurethane (Blue)

Further specifications can be found under the tab More information.

Composition of a Product Code - Claw Couplings

Part Number	-	Shaft Bore Dia. d₁	-	Shaft Bore Dia. d₂
MMJN55	-	15	-	18

Alterations - Claw Couplings

General Information - Claw Couplings

Shaft coupling - compensation coupling - Oldham coupling - slit coupling - chain coupling - disc coupling - bellow coupling - product assortment

Shaft Coupling Selection Details

- Material: aluminum, aluminum alloy, steel, stainless steel, plastic

- Coupling buffer material: polyacetal, polyurethane, nylon, aluminum bronze, carbon fibre reinforced polymer (CFRP)

- Disc material: stainless steel, polyimide, carbon fibre (carbon)

- Fastening: hub clamping, half shell clamping, threaded pin clamping, clamping sleeve, keyway

- Design: slit coupling, disc coupling (servo coupling), Oldham coupling, dog coupling, jaw coupling, bellow coupling, metal bellow coupling, elastomer coupling

- ISO tolerances: H8

- Shaft diameter: 1 to 45 mm

- Outer diameter: 6 to 95 mm

- Length: 8.4 to 100 mm

- Offset: angle offset, radial offset, axial offset

Design Overview

Description/Basics

A shaft coupling, also called a compensating coupling, is generally used for the transmission of torque for mechanical engineering. Flexible shaft couplings (non-rigid) can compensate for lateral, axial and angular offsets (misalignment). Therefore, these are common connecting elements between motors and axles/shafts or even ball screws.

There are various types of designs, such as the jaw couplings, disc couplings (servo couplings), slit couplings, bellow couplings, Oldham couplings and many others, which are selected depending on the type of misalignment. You can determine which design is the right one for transmission in your application with the Coupling Selection Method available as a PDF.

When the shaft coupling is professionally installed, the transmission of rotational forces should be slip-free. To do this, the appropriate shaft coupling must be selected depending on the application. Here, it is important to observe the degree of misalignment, the maximum speed of rotation and the permissible torque of the compensation coupling and not to exceed these values during operation. If several misalignments occur at the same time, it is recommended to reduce the maximum value of the specified misalignment by approximately half.

The most commonly used elastomer coupling is the jaw coupling, which consists of a plastic buffer with damping properties. As a result, shocks and vibrations in a drive system can be damped, which protects adjacent components in the transmission of force. Our product range offers you alternative materials for the elastomers. These include among others aluminum bronze and carbon fibre-reinforced plastic.

The different shaft connections on the compensation couplings allow various connection variants for assembly. For this purpose, hub clamping, half shell clamping, slot clamping, threaded pin clamping, chip sleeve and keyways are available.
If a keyway is selected for a MISUMI shaft coupling, it is recommended obtaining the MISUMI machine key, as it is best to combine these.

A shaft coupling can be used for precise positioning. These are often combined together with slide screws or ball screws. A disc clutch (servo coupling) is suitable for this application, since it has a high torsional rigidity.

In addition to the standardized diameter of the shaft bore, MISUMI offers the option LDC and RDC, which allows the drill diameter to be adjusted to the shaft end in 0.1 mm increments.

Application Examples - Claw Couplings

Application example: shaft coupling - disc coupling with servo motor - disc coupling with ball screw drive - shaft clutch with servo motor - shaft clutch with ball screw drive

Shaft coupling with servo motor and ball screw
(1) Servo motor, (2) disc coupling (servo coupling), (3) ball screw

Application example: shaft coupling with encoder - shaft coupling with bearing housing - slit coupling with encoder - slit coupling with bearing housing -

Slit coupling with encoder
(1) Bearing with housing, (2) shaft coupling, (3) motor, (4) axles/shafts

Application example - Performance test stand with shaft coupling - Oldham coupling with engine - test stand with Oldham coupling

Engine test stand with Oldham coupling
(1) X-axis positioning stage, (2) performance test station, (3) shaft coupling, (4) brackets, L-shaped

Application example: synchronous pulley with shaft coupling - shaft coupling with motor and gearbox

Shaft coupling with motor and gearbox
(1) Motor, (2) Shaft coupling, (3) Conversion/Reducing gears, (4) Timing pulleys / Idlers

Industrial Applications

3D printer industry

Automotive industry

Pharmaceutical industry

Packaging industry

Lista numerów części

Liczba pozycji

Numer części

MMJCN55-[15,16,18,20,24]-[15,16,18,20,24]

MMJCN55-[15,16,18,20,24]-RDC[15-24/1]

MMJCN55-LDC[15-24/1]-[15,16,18,20,24]

MMJCN55-LDC[15-24/1]-RDC[15-24/1]

MMJCN70-[18,20,24,28,30,35]-[18,20,24,28,30,35]

MMJCN70-[18,20,24,28,30,35]-RDC[18-35/1]

MMJCN70-LDC[18-35/1]-[18,20,24,28,30,35]

MMJCN70-LDC[18-35/1]-RDC[18-35/1]

MMJCN95-[24,28,30,35,40]-[24,28,30,35,40]

MMJCN95-[24,28,30,35,40]-RDC[24-40/1]

MMJCN95-LDC[24-40/1]-[24,28,30,35,40]

MMJCN95-LDC[24-40/1]-RDC[24-40/1]

MMJCP55-[15,16,18,20,24]-[15,16,18,20,24]

MMJCP55-[15,16,18,20,24]-RDC[15-24/1]

MMJCP55-LDC[15-24/1]-[15,16,18,20,24]

MMJCP55-LDC[15-24/1]-RDC[15-24/1]

MMJCP70-[18,20,24,28,30,35]-[18,20,24,28,30,35]

MMJCP70-[18,20,24,28,30,35]-RDC[18-35/1]

MMJCP70-LDC[18-35/1]-[18,20,24,28,30,35]

MMJCP70-LDC[18-35/1]-RDC[18-35/1]

MMJCP95-[24,28,30,35,40]-[24,28,30,35,40]

MMJCP95-[24,28,30,35,40]-RDC[24-40/1]

MMJCP95-LDC[24-40/1]-[24,28,30,35,40]

MMJCP95-LDC[24-40/1]-RDC[24-40/1]

MMJN55-[15,16,18,20,24]-[15,16,18,20,24]

MMJN55-[15,16,18,20,24]-RDC[15-24/1]

MMJN55-LDC[15-24/1]-[15,16,18,20,24]

MMJN55-LDC[15-24/1]-RDC[15-24/1]

MMJN70-[18,20,24,28,30,35]-[18,20,24,28,30,35]

MMJN70-[18,20,24,28,30,35]-RDC[18-35/1]

MMJN70-LDC[18-35/1]-[18,20,24,28,30,35]

MMJN70-LDC[18-35/1]-RDC[18-35/1]

MMJN95-[24,28,30,35,40]-[24,28,30,35,40]

MMJN95-[24,28,30,35,40]-RDC[24-40/1]

MMJN95-LDC[24-40/1]-[24,28,30,35,40]

MMJN95-LDC[24-40/1]-RDC[24-40/1]

MMJP55-[15,16,18,20,24]-[15,16,18,20,24]

MMJP55-[15,16,18,20,24]-RDC[15-24/1]

MMJP55-LDC[15-24/1]-[15,16,18,20,24]

MMJP55-LDC[15-24/1]-RDC[15-24/1]

MMJP70-[18,20,24,28,30,35]-[18,20,24,28,30,35]

MMJP70-[18,20,24,28,30,35]-RDC[18-35/1]

MMJP70-LDC[18-35/1]-[18,20,24,28,30,35]

MMJP70-LDC[18-35/1]-RDC[18-35/1]

MMJP95-[24,28,30,35,40]-[24,28,30,35,40]

MMJP95-[24,28,30,35,40]-RDC[24-40/1]

MMJP95-LDC[24-40/1]-[24,28,30,35,40]

MMJP95-LDC[24-40/1]-RDC[24-40/1]

Allowable Torque Range

(N•m)

Shaft Bore Dia. 1 d1 (or d)

(mm)

Shaft Bore Dia. 2 d2 (or d)

(mm)

O.D. D

(mm)

Overall Length

(mm)

Max. Rotational Speed Range

(r/min)

Allowable Torque

(Nm)

Max. Rotational Speed

(r/min)

Allowable Lateral Misalignment Range

(mm)

Allowable Lateral Misalignment

(mm)

Allowable Angular Misalignment

(deg)

Buffer Part Material

Allowable Axial Misalignment

(mm)

Moment of Inertia

(kg･m²)

Shaft Tightening Method

Shaft I.D. d1 Change Hole Dia. [LDC] Specified in 1mm Increment

Shaft I.D. d2 Change Hole Dia. [RDC] Specified in 1mm Increment

RoHS?

Minimalna wielkość zamówienia

50.01 to 100.00	15 ～ 24	15 ～ 24	55	60	4,001 to 10,000	80	8000	0.02 to 0.2	0.1	1	Nylon	+0.5/-0.5	1.0x10^-4	Clamping	-	-	10	1 szt.
50.01 to 100.00	15 ～ 24	-	55	60	4,001 to 10,000	80	8000	0.02 to 0.2	0.1	1	Nylon	+0.5/-0.5	1.0x10^-4	Clamping	-	15 ～ 24	10	1 szt.
50.01 to 100.00	-	15 ～ 24	55	60	4,001 to 10,000	80	8000	0.02 to 0.2	0.1	1	Nylon	+0.5/-0.5	1.0x10^-4	Clamping	15 ～ 24	-	10	1 szt.
50.01 to 100.00	-	-	55	60	4,001 to 10,000	80	8000	0.02 to 0.2	0.1	1	Nylon	+0.5/-0.5	1.0x10^-4	Clamping	15 ～ 24	15 ～ 24	10	1 szt.
-	18 ～ 35	18 ～ 35	70	75	4,001 to 10,000	120	6000	0.02 to 0.2	0.1	1	Nylon	+0.7/-0.7	4.0x10^-4	Clamping	-	-	10	1 szt.
-	18 ～ 35	-	70	75	4,001 to 10,000	120	6000	0.02 to 0.2	0.1	1	Nylon	+0.7/-0.7	4.0x10^-4	Clamping	-	18 ～ 35	10	1 szt.
-	-	18 ～ 35	70	75	4,001 to 10,000	120	6000	0.02 to 0.2	0.1	1	Nylon	+0.7/-0.7	4.0x10^-4	Clamping	18 ～ 35	-	10	1 szt.
-	-	-	70	75	4,001 to 10,000	120	6000	0.02 to 0.2	0.1	1	Nylon	+0.7/-0.7	4.0x10^-4	Clamping	18 ～ 35	18 ～ 35	10	1 szt.
-	24 ～ 40	24 ～ 40	95	100	2001 to 4,000	180	4000	0.02 to 0.2	0.15	1	Nylon	+1.0/-1.0	1.0x10^-3	Clamping	-	-	10	1 szt.
-	24 ～ 40	-	95	100	2001 to 4,000	180	4000	0.02 to 0.2	0.15	1	Nylon	+1.0/-1.0	1.0x10^-3	Clamping	-	24 ～ 40	10	1 szt.
-	-	24 ～ 40	95	100	2001 to 4,000	180	4000	0.02 to 0.2	0.15	1	Nylon	+1.0/-1.0	1.0x10^-3	Clamping	24 ～ 40	-	10	1 szt.
-	-	-	95	100	2001 to 4,000	180	4000	0.02 to 0.2	0.15	1	Nylon	+1.0/-1.0	1.0x10^-3	Clamping	24 ～ 40	24 ～ 40	10	1 szt.
10.01 to 20.00	15 ～ 24	15 ～ 24	55	60	4,001 to 10,000	20	8000	0.21 to 0.40	0.3	2	Polyurethane	+0.5/-0.5	1.0x10^-4	Clamping	-	-	10	1 szt.
10.01 to 20.00	15 ～ 24	-	55	60	4,001 to 10,000	20	8000	0.21 to 0.40	0.3	2	Polyurethane	+0.5/-0.5	1.0x10^-4	Clamping	-	15 ～ 24	10	1 szt.
10.01 to 20.00	-	15 ～ 24	55	60	4,001 to 10,000	20	8000	0.21 to 0.40	0.3	2	Polyurethane	+0.5/-0.5	1.0x10^-4	Clamping	15 ～ 24	-	10	1 szt.
10.01 to 20.00	-	-	55	60	4,001 to 10,000	20	8000	0.21 to 0.40	0.3	2	Polyurethane	+0.5/-0.5	1.0x10^-4	Clamping	15 ～ 24	15 ～ 24	10	1 szt.
20.01 to 50.00	18 ～ 35	18 ～ 35	70	75	4,001 to 10,000	40	6000	0.21 to 0.40	0.3	2	Polyurethane	+0.7/-0.7	4.0x10^-4	Clamping	-	-	10	1 szt.
20.01 to 50.00	18 ～ 35	-	70	75	4,001 to 10,000	40	6000	0.21 to 0.40	0.3	2	Polyurethane	+0.7/-0.7	4.0x10^-4	Clamping	-	18 ～ 35	10	1 szt.
20.01 to 50.00	-	18 ～ 35	70	75	4,001 to 10,000	40	6000	0.21 to 0.40	0.3	2	Polyurethane	+0.7/-0.7	4.0x10^-4	Clamping	18 ～ 35	-	10	1 szt.
20.01 to 50.00	-	-	70	75	4,001 to 10,000	40	6000	0.21 to 0.40	0.3	2	Polyurethane	+0.7/-0.7	4.0x10^-4	Clamping	18 ～ 35	18 ～ 35	10	1 szt.
50.01 to 100.00	24 ～ 40	24 ～ 40	95	100	2001 to 4,000	80	4000	0.21 to 0.40	0.4	2	Polyurethane	+1.0/-1.0	1.0x10^-3	Clamping	-	-	10	1 szt.
50.01 to 100.00	24 ～ 40	-	95	100	2001 to 4,000	80	4000	0.21 to 0.40	0.4	2	Polyurethane	+1.0/-1.0	1.0x10^-3	Clamping	-	24 ～ 40	10	1 szt.
50.01 to 100.00	-	24 ～ 40	95	100	2001 to 4,000	80	4000	0.21 to 0.40	0.4	2	Polyurethane	+1.0/-1.0	1.0x10^-3	Clamping	24 ～ 40	-	10	1 szt.
50.01 to 100.00	-	-	95	100	2001 to 4,000	80	4000	0.21 to 0.40	0.4	2	Polyurethane	+1.0/-1.0	1.0x10^-3	Clamping	24 ～ 40	24 ～ 40	10	1 szt.
50.01 to 100.00	15 ～ 24	15 ～ 24	55	60	10,001 to 78,000	80	11000	0.02 to 0.2	0.1	1	Nylon	+0.5/-0.5	1.0x10^-4	Clamping	-	-	10	1 szt.
50.01 to 100.00	15 ～ 24	-	55	60	10,001 to 78,000	80	11000	0.02 to 0.2	0.1	1	Nylon	+0.5/-0.5	1.0x10^-4	Clamping	-	15 ～ 24	10	1 szt.
50.01 to 100.00	-	15 ～ 24	55	60	10,001 to 78,000	80	11000	0.02 to 0.2	0.1	1	Nylon	+0.5/-0.5	1.0x10^-4	Clamping	15 ～ 24	-	10	1 szt.
50.01 to 100.00	-	-	55	60	10,001 to 78,000	80	11000	0.02 to 0.2	0.1	1	Nylon	+0.5/-0.5	1.0x10^-4	Clamping	15 ～ 24	15 ～ 24	10	1 szt.
-	18 ～ 35	18 ～ 35	70	75	4,001 to 10,000	120	8000	0.02 to 0.2	0.1	1	Nylon	+0.7/-0.7	4.0x10^-4	Set Screws	-	-	10	1 szt.
-	18 ～ 35	-	70	75	4,001 to 10,000	120	8000	0.02 to 0.2	0.1	1	Nylon	+0.7/-0.7	4.0x10^-4	Set Screws	-	18 ～ 35	10	1 szt.
-	-	18 ～ 35	70	75	4,001 to 10,000	120	8000	0.02 to 0.2	0.1	1	Nylon	+0.7/-0.7	4.0x10^-4	Set Screws	18 ～ 35	-	10	1 szt.
-	-	-	70	75	4,001 to 10,000	120	8000	0.02 to 0.2	0.1	1	Nylon	+0.7/-0.7	4.0x10^-4	Set Screws	18 ～ 35	18 ～ 35	10	1 szt.
-	24 ～ 40	24 ～ 40	95	100	4,001 to 10,000	180	6000	0.02 to 0.2	0.15	1	Nylon	+1.0/-1.0	1.0x10^-3	Clamping	-	-	10	1 szt.
-	24 ～ 40	-	95	100	4,001 to 10,000	180	6000	0.02 to 0.2	0.15	1	Nylon	+1.0/-1.0	1.0x10^-3	Clamping	-	24 ～ 40	10	1 szt.
-	-	24 ～ 40	95	100	4,001 to 10,000	180	6000	0.02 to 0.2	0.15	1	Nylon	+1.0/-1.0	1.0x10^-3	Clamping	24 ～ 40	-	10	1 szt.
-	-	-	95	100	4,001 to 10,000	180	6000	0.02 to 0.2	0.15	1	Nylon	+1.0/-1.0	1.0x10^-3	Clamping	24 ～ 40	24 ～ 40	10	1 szt.
10.01 to 20.00	15 ～ 24	15 ～ 24	55	60	10,001 to 78,000	20	11000	0.21 to 0.40	0.3	2	Polyurethane	+0.5/-0.5	1.0x10^-4	Set Screws	-	-	10	1 szt.
10.01 to 20.00	15 ～ 24	-	55	60	10,001 to 78,000	20	11000	0.21 to 0.40	0.3	2	Polyurethane	+0.5/-0.5	1.0x10^-4	Set Screws	-	15 ～ 24	10	1 szt.
10.01 to 20.00	-	15 ～ 24	55	60	10,001 to 78,000	20	11000	0.21 to 0.40	0.3	2	Polyurethane	+0.5/-0.5	1.0x10^-4	Set Screws	15 ～ 24	-	10	1 szt.
10.01 to 20.00	-	-	55	60	10,001 to 78,000	20	11000	0.21 to 0.40	0.3	2	Polyurethane	+0.5/-0.5	1.0x10^-4	Set Screws	15 ～ 24	15 ～ 24	10	1 szt.
20.01 to 50.00	18 ～ 35	18 ～ 35	70	75	4,001 to 10,000	40	8000	0.21 to 0.40	0.3	2	Polyurethane	+0.7/-0.7	4.0x10^-4	Set Screws	-	-	10	1 szt.
20.01 to 50.00	18 ～ 35	-	70	75	4,001 to 10,000	40	8000	0.21 to 0.40	0.3	2	Polyurethane	+0.7/-0.7	4.0x10^-4	Set Screws	-	18 ～ 35	10	1 szt.
20.01 to 50.00	-	18 ～ 35	70	75	4,001 to 10,000	40	8000	0.21 to 0.40	0.3	2	Polyurethane	+0.7/-0.7	4.0x10^-4	Set Screws	18 ～ 35	-	10	1 szt.
20.01 to 50.00	-	-	70	75	4,001 to 10,000	40	8000	0.21 to 0.40	0.3	2	Polyurethane	+0.7/-0.7	4.0x10^-4	Set Screws	18 ～ 35	18 ～ 35	10	1 szt.
50.01 to 100.00	24 ～ 40	24 ～ 40	95	100	4,001 to 10,000	80	6000	0.21 to 0.40	0.4	2	Polyurethane	+1.0/-1.0	1.0x10^-3	Set Screws	-	-	10	1 szt.
50.01 to 100.00	24 ～ 40	-	95	100	4,001 to 10,000	80	6000	0.21 to 0.40	0.4	2	Polyurethane	+1.0/-1.0	1.0x10^-3	Set Screws	-	24 ～ 40	10	1 szt.
50.01 to 100.00	-	24 ～ 40	95	100	4,001 to 10,000	80	6000	0.21 to 0.40	0.4	2	Polyurethane	+1.0/-1.0	1.0x10^-3	Set Screws	24 ～ 40	-	10	1 szt.
50.01 to 100.00	-	-	95	100	4,001 to 10,000	80	6000	0.21 to 0.40	0.4	2	Polyurethane	+1.0/-1.0	1.0x10^-3	Set Screws	24 ～ 40	24 ～ 40	10	1 szt.

Cena jednostkowa (bez VAT)(Cena jednostkowa z podatkiem)	Standardowa data wysyłki

- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze
- ( - )	9 dni robocze

Podstawowe informacje

Dane techniczne

Kontury i specyfikacja

Back to the Category Shaft Couplings

Technical Drawing - Claw Couplings

Open the technical drawing in the new window

Specification Tables - Claw Couplings

■Set Screw

Part Number		d₁, d₂ Selection (d₁≤d₂)									D₁	d₃	L	ℓ	F	Set Screw		Separating Tap Dia. N	Unit Price
Type	D	d₁, d₂ Selection (d₁≤d₂)									D₁	d₃	L	ℓ	F	M	Tightening Torque (N • m)	Separating Tap Dia. N	Unit Price
MMJN MMJP	55	15	16	18	20	24					56	27	60	21	10.5	M6	8	M4
	70			18	20	24	28	30	35		72	35	75	26	13	M8	16	M5
	95					24	28	30	35	40	97	46	100	35.5	17.5	M10	33	M6

■Clamping

Part Number		d₁, d₂ Selection (d₁≤d₂)									D₁	d₃	L	ℓ	F	A	Clamp Screw		Separating Tap Dia. N	Unit Price
Type	D	d₁, d₂ Selection (d₁≤d₂)									D₁	d₃	L	ℓ	F	A	M	Tightening Torque (N • m)	Separating Tap Dia. N	Unit Price
MMJCN MMJCP	55	15	16	18	20	24					56	27	60	21	10.5	18.5	M6	15	M4
	70			18	20	24	28	30	35		72	35	75	26	13	24	M8	32	M5
	95					24	28	30	35	40	97	46	100	35.5	17.5	32	M10	65	M6

■Set Screw (High Rigidity)

Part Number		Allowable Torque (N • m)	Angular Misalignment (°)	Lateral Misalignment (mm)	Static Torsional Spring Constant (N • m/rad)	Max. Rotational Speed (r/min)	Moment of Inertia (kg • m²)	Allowable Axial Misalignment (mm)	Mass (g)
Type	D
MMJN	55	80	1	0.1	8000	11000	1.0x10^-4	±0.5	300
	70	120			11000	8000	4.0x10^-4	±0.7	600
	95	180		0.15	20000	6000	1.0x10^-3	±1.0	1200

(Misalignment Tolerant Type)

Part Number		Allowable Torque (N • m)	Angular Misalignment (°)	Lateral Misalignment (mm)	Static Torsional Spring Constant (N • m/rad)	Max. Rotational Speed (r/min)	Moment of Inertia (kg • m²)	Allowable Axial Misalignment (mm)	Mass (g)
Type	D
MMJP	55	20	2	0.3	600	11000	1.0x10^-4	±0.5	300
	70	40			1200	8000	4.0x10^-4	±0.7	600
	95	80		0.4	4000	6000	1.0x10^-3	±1.0	1200

The allowable torque varies depending on temperature. See >>P.1062

■Clamping (High Rigidity)

Part Number		Allowable Torque (N • m)	Angular Misalignment (°)	Lateral Misalignment (mm)	Static Torsional Spring Constant (N • m/rad)	Max. Rotational Speed (r/min)	Moment of Inertia (kg • m²)	Allowable Axial Misalignment (mm)	Mass (g)
Type	D
MMJCN	55	80	1	0.1	8000	8000	1.0x10^-4	±0.5	300
	70	120			11000	6000	4.0x10^-4	±0.7	600
	95	180		0.15	20000	4000	1.0x10^-3	±1.0	1200

(Misalignment Tolerant Type)

Part Number		Allowable Torque (N • m)	Angular Misalignment (°)	Lateral Misalignment (mm)	Static Torsional Spring Constant (N • m/rad)	Max. Rotational Speed (r/min)	Moment of Inertia (kg • m²)	Allowable Axial Misalignment (mm)	Mass (g)
Type	D
MMJCP	55	20	2	0.3	600	8000	1.0x10^-4	±0.5	300
	70	40			1200	6000	4.0x10^-4	±0.7	600
	95	80		0.4	4000	4000	1.0x10^-3	±1.0	1200

The allowable torque varies depending on temperature. See >>P.1062

Alterations - Claw Couplings

Katalog

Products homepage

Katalog (arkusz dwustronny)