Insert（Page 4）

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

• 

  Brass, Ensat, Screw Plastic Deformation, Type 305

  KKV

  Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Reinforcing female screws using Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily causes female screws to be destroyed when directly tapped.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.50 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Iron, Ensat, with Pin / Long Type 318

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  Select to compare

  Configure now
  Starting from∗ ：	5.73 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Iron, Ensat Small Outside Three-Hole / Short 347 Type

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.20 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Iron, Ensat Small Outside Three-Hole / Long348 Type

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.20 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Tool for Inserts Manual Processing 610-Type

  KKV

  A manual work tool for inserts. Size / internal screw d1 (mm) 2.5 3 3.5 4 5 6

  • Volume Discount

  • Stock

  Select to compare

  Configure now
  Starting from∗ ：	73.67 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Tool for Inserts Machine Processing 620-Type

  KKV

  A tool for machine processing inserts. Size / internal screw d1 (mm) 2.5 3 3.5 4 5 6 size / internal screw d1 (mm) 2.5 3 3.5 4 5 6

  Select to compare

  Configure now
  Starting from∗ ：	157.55 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  TEC Sonic (TEC Type)【1-500 Pieces Per Package】

  JAPAN DRIVE-IT

  [Type] Press Fit
  [Materials] Brass
  [Screw type] Metric (coarse) screw, without notch
  [Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 2.5, 3, 4, 5, 6, 8, Length (following insertion)
  [L](D = screw diameter M) 1.5D 2D 2.5D
  [Length] B (mm) 3.9 5.7 8.2 9.5 12.7

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.34 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Flat Head Sparrow (Type HSR)

  JAPAN DRIVE-IT

  [Type] Press Fit
  [Materials] Brass
  [Screw type] Metric (coarse) screw, without notch
  [Shape] Standard, Screw Diameter (following insertion) M (mm), 3 4 5 8, Length (following insertion)
  [L](D = screw diameter M) 1.5D 2D

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.55 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  B-Lock Model N41

  JAPAN DRIVE-IT

  [Type] Press Fit
  [Materials] Brass
  [Screw type] Metric (coarse) screw, with notch
  [Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 2.5, 3, 4, 5, 6, Length (following insertion)
  [L](D = screw diameter M) 1.5D 2D
  [Length] B (mm) 3.9 4.7 7.9 9.5 12.7

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.13 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  B-Lock Model N42

  JAPAN DRIVE-IT

  [Type] Press Fit
  [Materials] Brass
  [Screw type] Metric (coarse) screw, with notch
  [Shape] Standard, Screw Diameter (following insertion) M (mm), 3 4 6, Length (following insertion)
  [L](D = screw diameter M) 1.5D 2D

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.21 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Press Lock (Type PLK)

  JAPAN DRIVE-IT

  [Type] Press Fit
  [Materials] Brass
  [Screw type] Metric (coarse) screw length (after insertion)
  [L](D = screw diameter M) 2D with notch
  [Shape] Standard, Screw Diameter (following insertion) M (mm), 3 4 5
  [Length] B (mm) 5.8 8.2 9.5

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.10 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Fin Lock (Type FL)

  JAPAN DRIVE-IT

  [Type] Press Fit
  [Materials] Brass
  [Screw type] Metric (coarse) screw, without notch
  [Shape] Standard, Screw Diameter (following insertion) M (mm), 3 4, Length (following insertion)
  [L](D = screw diameter M) 1.5D 2D
  [Length] B (mm) 4.8 8.0

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.37 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Tangless Insert Metric Coarse Taping Packaging

  ACCURATE

  We prevent incorrect quantities by shipping using tape and packaging. Aims to improve efficiency through using electric tools in combination.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.07 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Brass Flat Head Sonic Lock (SHK Type)

  SUNCO

  [Nominal M] 3
  [Material] Brass
  [Surface Processing] Bare

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.31 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Stainless Steel Sprue (Other, Fine)【1-100 Pieces Per Package】

  SUNCO

  [Nominal M] 8, 24, 33
  [Material] Stainless Steel
  [Surface Processing] Bare

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.08 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Stainless Steel Sprue (Unify) (UNF)

  SUNCO

  [Material] Stainless Steel
  [Surface Processing] Bare

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.43 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Stainless Steel E-Sert Hemlock-Made【1-100 Pieces Per Package】

  SUNCO

  [Nominal M] 2, 2.2, 2.5, 2.6, 7, 14, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 42
  [Material] Stainless Steel
  [Surface Processing] Bare

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.85 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Stainless Steel E-Sert Fine (Hemlock-Made)【1-100 Pieces Per Package】

  SUNCO

  [Nominal M] 6, 8, 14, 18, 20, 22, 24, 27, 30, 33, 36, 39
  [Material] Stainless Steel
  [Surface Processing] Bare

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.79 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Stainless Steel E-Sert (Unify) (UNC)【1-100 Pieces Per Package】

  SUNCO

  [Nominal]
  [Material] Stainless Steel
  [Surface Processing] Bare

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.89 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Stainless Steel E-Sert (Unify) (UNF)【1-100 Pieces Per Package】

  SUNCO

  [Nominal] #6-40, #8-36, #10-32, 1/4-28, 5/16-24, 3/8-24, 7/16-20, 1/2-20, 5/8-18, 3/4-16, 7/8-14, 1-12
  [Material] Stainless Steel
  [Surface Processing] Bare

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.39 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  ESCO, M10 to 1.5 [Metric] Recoil Kit (Coarse), EA949VA-10A

  ESCO

  【Product Specifications】
  ・Material-Stainless steel (SUS304)
  ・Set details- Recoil, insertion tool , drill for prepared hole, recoil tap, magnet type tongue removing toll
  ・Use a tap holder esparately
  ・Case dim.-195 x 85 x 30 (H)mm
  ・Dim.-M10-1.5 (coarse)
  ・No. of recoils-10pcs

  Select to compare

  Configure now
  Starting from∗ ：	132.03 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  [Metric] Recoil Kit with Tap (Fine) EA949VA-10BA

  ESCO

  【Product Specifications】
  ・Material-Stainless steel (SUS304)
  ・Set details- Recoil, insertion tool , drill for prepared hole, recoil tap, magnet type tongue removing toll
  ・Use a tap holder esparately
  ・Case dim.-195 x 85 x 30 (H)mm
  ・Dim.-M10-1.25 (thin)
  ・No. of recoils-10 pcs

  Select to compare

  Configure now
  Starting from∗ ：	92.24 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  ESCO, M10 to 1.0 [Metric] Recoil Kit (Extra Fine), EA949VA-10CA

  ESCO

  【Product Specifications】
  ・Material-Stainless steel (SUS304)
  ・Set details- Recoil, insertion tool, drill for prepared hole, recoil tap, magnet type tongue removing toll
  ・Use a tap holder esparately
  ・Case dim.-195 x 85 x 30 (H)mm
  ・Dim.-M10-1.0 (extra thin)
  ・No. of recoils-10 pcs

  Select to compare

  Configure now
  Starting from∗ ：	122.65 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  [Metric] Recoil Kit with Tap (Coarse) EA949VA-12A

  ESCO

  【Product Specifications】
  ・Material-Stainless steel (SUS304)
  ・Set details- Recoil, insertion tool , drill for prepared hole, recoil tap, magnet type tongue removing toll
  ・Use a tap holder esparately
  ・Case dim.-195 x 85 x 30 (H)mm
  ・Dim.-M12-1.75 (coarse)
  ・No. ofrecoils-10 pcs

  Select to compare

  Configure now
  Starting from∗ ：	109.08 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  ESCO, M12 to 1.5 [Metric] Recoil Kit (Fine), EA949VA-12BA

  ESCO

  【Product Specifications】
  ・Material-Stainless steel (SUS304)
  ・Set details- Recoil, insertion tool, drill for prepared hole, recoil tap, magnet type tongue removing toll
  ・Use a tap holder esparately
  ・Case dim.-195 x 85 x 30 (H)mm
  ・Dim.-M12-1.5 (thin)
  ・No. of recoils-10 pcs

  Select to compare

  Configure now
  Starting from∗ ：	115.67 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  ESCO, M12 to 1.25 [Metric] Recoil Kit (Extra Fine), EA949VA-12CA

  ESCO

  【Product Specifications】
  ・Material-Stainless steel (SUS304)
  ・Set details- Recoil, insertion tool, drill for prepared hole, recoil tap, magnet type tongue removing toll
  ・Use a tap holder esparately
  ・Case dim.-195 x 85 x 30 (H)mm
  ・Dim.-M12-1.25(extra thin)
  ・No. of recoils-10 pcs

  Select to compare

  Configure now
  Starting from∗ ：	123.20 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  ESCO, M14 to 1.5 [Metric] Recoil Kit (Fine), EA949VA-14BA

  ESCO

  【Product Specifications】
  ・Material-Stainless steel (SUS304)
  ・Set details- Recoil, insertion tool , recoil tap
  ・Case dim.-195 x 85 x 30 (H)mm
  ・Use a tap holder esparately
  ・Dim.-M14-1.5(thin)
  ・No. of recoils-6 pcs

  Select to compare

  Configure now
  Starting from∗ ：	147.83 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  [Metric] Recoil Kit with Tap (Coarse) EA949VA-16A

  ESCO

  【Product Specifications】
  ・Material-Stainless steel (SUS304)
  ・Set details- Recoil, insertion tool , recoil tap
  ・Case dim.-195 x 85 x 30 (H)mm
  ・Dim.-M16-2.0(coarse)
  ・Use a tap holder esparately
  ・No. of recoils-6 pcs

  Select to compare

  Configure now
  Starting from∗ ：	151.24 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  [Metric] Recoil Kit with Tap (Fine) EA949VA-16BA

  ESCO

  【Product Specifications】
  ・Material-Stainless steel (SUS304)
  ・Set details- Recoil, insertion tool , recoil tap
  ・Use a tap holder esparately
  ・Case dim.-195 x 85 x 30 (H)mm
  ・Dim.-M16-1.5(thin)
  ・No. of recoils-6 pcs

  Select to compare

  Configure now
  Starting from∗ ：	156.89 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  [Metric] Recoil Kit with Tap (Coarse) EA949VA-3A

  ESCO

  【Product Specifications】
  ・Material-Stainless steel (SUS304)
  ・Set details- Recoil, insertion tool , drill for prepared hole, recoil tap, magnet type tongue removing toll
  ・Use a tap holder esparately
  ・Case dim.-195 x 85 x 30 (H)mm
  ・Dim.-M3-0.5 (coarse)
  ・No. of recoils-15 pcs

  Select to compare

  Configure now
  Starting from∗ ：	128.48 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  [Metric] Recoil Kit with Tap (Coarse) EA949VA-4A

  ESCO

  【Product Specifications】
  ・Material-Stainless steel (SUS304)
  ・Set details- Recoil, insertion tool, drill for prepared hole, recoil tap, magnet type tongue removing toll
  ・Use a tap holder esparately
  ・Case dim.-195 x 85 x 30 (H)mm
  ・Dim.-M4-0.7 (coarse)
  ・No. of recoils-15 pcs

  Select to compare

  Configure now
  Starting from∗ ：	117.30 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  [Metric] Recoil Kit with Tap (Coarse) EA949VA-5A

  ESCO

  【Product Specifications】
  ・Material-Stainless steel (SUS304)
  ・Set details- Recoil, insertion tool , drill for prepared hole, recoil tap, magnet type tongue removing toll
  ・Use a tap holder esparately
  ・Case dim.-195 x 85 x 30 (H)mm
  ・Dim.-M5-0.8 (coarse)
  ・No. of recoils-15 pcs

  Select to compare

  Configure now
  Starting from∗ ：	112.89 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  [Metric]Recoil Kit, M6 to 1.0 (Coarse)

  ESCO

  【Product Specifications】
  ・Material-Stainless steel (SUS304)
  ・Set details- Recoil, insertion tool , drill for prepared hole, recoil tap, magnet type tongue removing toll
  ・Use a tap holder esparately
  ・Case dim.-195 x 85 x 30 (H)mm
  ・Dim.-M6-1.0 (coarse)
  ・No. of recoils-15 pcs

  Select to compare

  Configure now
  Starting from∗ ：	108.17 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  [Metric] Recoil Kit with Tap (Coarse) EA949VA-7A

  ESCO

  【Product Specifications】
  ・Material-Stainless steel (SUS304)
  ・Set details- Recoil, insertion tool , drill for prepared hole, recoil tap, magnet type tongue removing toll
  ・Use a tap holder esparately
  ・Case dim.-195 x 85 x 30 (H)mm
  ・Dim.-M7-1.0 (coarse)
  ・No. of recoils-15 pcs

  Select to compare

  Configure now
  Starting from∗ ：	131.23 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  ESCO, M8 to 1.25 [Metric] Recoil Kit (Coarse), EA949VA-8A

  ESCO

  【Product Specifications】
  ・Material-Stainless steel (SUS304)
  ・Set details- Recoil, insertion tool , drill for prepared hole, recoil tap, magnet type tongue removing toll
  ・Use a tap holder esparately
  ・Case dim.-195 x 85 x 30 (H)mm
  ・Dim.-M8-1.25 (coarse)
  ・No. of recoils-15 pcs

  Select to compare

  Configure now
  Starting from∗ ：	117.96 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  [Metric] Recoil Kit with Tap (Fine) EA949VA-8BA

  ESCO

  【Product Specifications】
  ・Material-Stainless steel (SUS304)
  ・Set details- Recoil, insertion tool , drill for prepared hole, recoil tap, magnet type tongue removing toll
  ・Use a tap holder esparately
  ・Case dim.-195 x 85 x 30 (H)mm
  ・Dim.-M8-1.0 (thin)
  ・No. of recoils-15 pcs

  Select to compare

  Configure now
  Starting from∗ ：	117.96 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  ESCO, M10 to 1.5 [Metric] Recoil Kit (Coarse), EA949VB-10A

  ESCO

  【Product Specifications】
  ・Material-Stainless steel (SUS304)
  ・Set details- Recoil, insertion tool, pilot tap, magnet type tongue removing toll
  ・Use a tap holder esparately
  ・Case dim.-195 x 85 x 30 (H)mm
  ・Dim.-M10-1.5 (coarse)
  ・No. of recoils-10 pcs

  Select to compare

  Configure now
  Starting from∗ ：	115.11 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  ESCO, M10 to 1.0 [Metric] Recoil Kit (Extra Fine), EA949VB-10CA

  ESCO

  【Product Specifications】
  ・Material-Stainless steel (SUS304)
  ・Set details- Recoil, insertion tool , pilot tap, magnet type tongue removing toll
  ・Use a tap holder esparately
  ・Case dim.-195 x 85 x 30 (H)mm
  ・Dim.-M10-1.0 (extra thin)
  ・No. of recoils-10 pcs

  Select to compare

  Configure now
  Starting from∗ ：	131.12 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  ESCO, M12 to 1.5 [Metric] Recoil Kit (Fine), EA949VB-12BA

  ESCO

  【Product Specifications】
  ・Material-Stainless steel (SUS304)
  ・Set details- Recoil, insertion tool , pilot tap, magnet type tongue removing toll
  ・Use a tap holder esparately
  ・Case dim.-195 x 85 x 30 (H)mm
  ・Dim.-M12-1.5 (thin)
  ・No. of recoils-10 pcs

  Select to compare

  Configure now
  Starting from∗ ：	139.20 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  ESCO, M12 to 1.25 [Metric] Recoil Kit (Extra Fine), EA949VB-12CA

  ESCO

  【Product Specifications】
  ・Material-Stainless steel (SUS304)
  ・Set details- Recoil, insertion tool , pilot tap, magnet type tongue removing toll
  ・Use a tap holder esparately
  ・Case dim.-195 x 85 x 30 (H)mm
  ・Dim.-M12-1.25 (extra thin)
  ・No. of recoils-10 pcs

  Select to compare

  Configure now
  Starting from∗ ：	131.67 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  ESCO, M14 to 1.5 [Metric] Recoil Kit (Fine), EA949VB-14BA

  ESCO

  【Product Specifications】
  ・Material-Stainless steel (SUS304)
  ・Set details- Recoil, insertion tool , pilot tap
  ・Use a tap holder esparately
  ・Case dim.-195 x 85 x 30 (H)mm
  ・Dim.-M14-1.5 (thin)
  ・No. of recoils…6 pcs

  Select to compare

  Configure now
  Starting from∗ ：	157.24 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  [Metric] Recoil Kit with Tap (Extra Fine) EA949VB-14CA

  ESCO

  【Product Specifications】
  ・Material-Stainless steel (SUS304)
  ・Set details- Recoil, insertion tool, pilot tap
  ・Use a tap holder esparately
  ・Case dim.-195 x 85 x 30 (H)mm
  ・Dim.-M14-1.25 (extra thin)
  ・No. of recoils - 12 pcs

  Select to compare

  Configure now
  Starting from∗ ：	155.36 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  M6 to 1.0 "Metric" Recoil Kit (Coarse)

  ESCO

  【Product Specifications】
  ・Material-Stainless steel (SUS304)
  ・Set details- Recoil, insertion tool , pilot tap, magnet type tongue removing toll
  ・Use a tap holder esparately
  ・Case dim.-195 x 85 x 30 (H)mm
  ・Dim.-M6-1.0 (coarse)
  ・No. of recoils-15 pcs

  Select to compare

  Configure now
  Starting from∗ ：	98.55 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  ESCO, M8 to 1.25 [Metric] Recoil Kit (Coarse), EA949VB-8A

  ESCO

  【Product Specifications】
  ・Material-Stainless steel (SUS304)
  ・Set details- Recoil, insertion tool , pilot tap, magnet type tongue removing toll
  ・Use a tap holder esparately
  ・Case dim.-195 x 85 x 30 (H)mm
  ・Dim.-M8-1.25 (coarse)
  ・No. of recoils-15 pcs

  Select to compare

  Configure now
  Starting from∗ ：	98.88 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Recoil Thread Insert Tool EA949VC-10A

  ESCO

  【Product Specifications】
  ・Use this tool when inserting a recoil insert.
  ・Dim. -Metric：M9-1.0・1.25/M10-1.5, UNC/BSW：3/8"

  Select to compare

  Configure now
  Starting from∗ ：	41.04 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

Loading...