Insert

Search by sub-category

332

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

1
2
3
4
5
Next >>

Self-Tapping Inserts / Slotted

MISUMI

It is a split groove threaded insert, threaded on both the inner and outer diameters.
Fasteners that do not require a front force strip to compensate for the mechanical strength of threaded sections made of materials with relatively low strength.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	1.24 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Insert Nitronics 60

RECOIL

Insert to prevent screw galling (seizing). No lubricating oil required. (Helisert and sprue).

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	2.80 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Dodge Bit Insert (Standard) SB Brass (Cadmium-Free)

Dodge Bit Insert (Standard) SB Brass (Cadmium-Free)【1-8,000 Pieces Per Package】

TOKAI METAL INDUSTRY

A general-purpose well-balanced screw insert with low cost.
[Features]
・ At the time of press-fit, the product has direction.
・ An insert nut that is well balanced in all aspects including easy use, holding power, cost, etc.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.16 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Insert Phosphor Bronze

RECOIL

Electrical junction joint up to 300 °C. Insert for non-magnetic application (Helisert and sprue).

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1.02 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Ultrasert UD2 / UD4 (Brass Cadmium-Free)

Ultrasert UD2 / UD4 (Brass Cadmium-Free)【1-5,000 Pieces Per Package】

TOKAI METAL INDUSTRY

These inserts are the best choice for easy and secure fitment into plastic holes.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.20 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Thread Inserts

MISUMI

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	1.03 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Threaded inserts self-tapping with cutting slot (K0978)

KIPP

[Specifications]
・Version 1: Self-tapping
・Version 2: With cutting slot
・Material: Stainless steel, Steel
・Surface finish body: Bright, galvanised
・D1=Internal thread: M3-M16

[Features]
・For making high-strength screw connections in materials with low shear strength
・Guarantees secure and firm anchoring in the host material
・Ideal for difficult-to-machine materials
・Version: steel or stainless steel

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	0.36 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Promotional pricing

Ensat, Slotted Type 302

KKV

Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

Volume Discount

Stock

Select to compare

Configure now
Starting from^∗ ：	0.48 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Tangless Inserts Installation / Removal Tools

MISUMI

Volume Discount

Stock

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	164.48 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Tangless Insert Insertion Tool

ACCURATE

A tangless insert metric coarse insertion tool.

Select to compare

Configure now
Starting from^∗ ：	116.01 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Stainless Steel / Insert Nut Threaded Type (Slotted) / IRU-S

HIROSUGI-KEIKI

[Nominal of Thread (M)] 2.6/3/4/5/6/8
[Material] Free-Cutting Stainless Steel (SUS303)
[Processing] Degreasing

Select to compare

Configure now
Starting from^∗ ：	1.34 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Promotional pricing

Dodge Bit Insert Flange Type (Brass Cadmium-Free)

Dodge Bit Insert Flange Type (Brass Cadmium-Free)【1-5,000 Pieces Per Package】

TOKAI METAL INDUSTRY

General purpose type. Low cost and well balanced.

Volume Discount

Stock

Select to compare

Configure now
Starting from^∗ ：	0.29 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Thread Inserts / Tangless

MISUMI

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	1.90 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Ensat, Chip-Free / Short, Type 337

KKV

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1.06 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Brass Bit Insert (Flanged) / HFB

HIROSUGI-KEIKI

[Nominal of Thread (M)] 2/2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] Degreasing

Select to compare

Configure now
Starting from^∗ ：	0.42 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Tangless Insert Manual Pre-Winder Tool

ACCURATE

An insertion tool for tangless inserts. This can be used with either a standard type or a lock type.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	475.02 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Thread Insert Installation Tool

MISUMI

Volume Discount

Stock

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	91.10 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Promotional pricing

Serrated locking plates, Stainless Steel

GANTER

With the aid of Stainless Steel-Serrated locking plates GN 187.4 standard components can be interlocked and firmly set at a defined angle.
The angular position of the fixing bores in relation to the serrations is not defined in the standard design. The exact positioning is available as special design.
The range of designs makes these plates adapt-able for almost any application in this particular field. To complement these serrated locking plates, accessories such as guide pots GN 187.1 and thrust springs GN 187.2 are useful additional standard parts.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	11.38 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Ensat, Ultra Coarse Outside Screw, Type 309

KKV

Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Reinforcing female screws using Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily causes female screws to be destroyed when directly tapped.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.50 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Stainless Steel / Insert Nut Threaded Type / IRU

HIROSUGI-KEIKI

[Nominal of Thread (M)] 2/2.5/2.6/3/4/5/6/8
[Material] Free-Cutting Stainless Steel (SUS303)
[Processing] Degreasing

Select to compare

Configure now
Starting from^∗ ：	0.98 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Threaded Inserts (K0398)

KIPP

[Specifications]
・Version 1: Standard
・Material: Steel, Stainless steel
・Core drill φ(mm): 6.9-14.8
・D1=Internal thread: M5-M12x1.25

[Features]
・Enables tapped holes which have been damaged to be used again or repaired
・Suitable for use in various materials
・Quick and easy installation
・No other special tools are needed besides the assembly tool

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	3.69 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Insert, Inconel X-750

RECOIL

The color of the main body will become silver when the method of heat treatment changes.

Not plated. (Inconel Black Recoil)
An insert (Helisert/Sprue) for use at high temperatures (425–550°C) and with non-magnetic applications.

[Features]
· Nickel alloy.
· For use at high temperatures (425–550°C [800–1,000°F]) and with non-magnetic applications.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	20.98 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

DIN 7965 Screwed inserts

REYHER

RAMPA couplings; Screwed inserts; Slotted nuts

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.36 €
Min. Shipping Days ：	2 Days

*Unit price with basic configuration

Promotional pricing

DODGE BET Insert (Standard), Double Sided Chamfer Type, Brass (Cadmium-Free)

DODGE BET Insert (Standard), Double Sided Chamfer Type, Brass (Cadmium-Free)【1-15,000 Pieces Per Package】

TOKAI METAL INDUSTRY

General purpose type. Low cost and well balanced.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.19 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Recoil-Free (mm) SUS304

Recoil-Free (mm) SUS304【1-3 Pieces Per Package】

RECOIL

Made from regular 304 grade stainless steel (18–8), but inserts made from other application-specific materials are also manufactured.

Volume Discount

Stock

Select to compare

Configure now
Starting from^∗ ：	0.74 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Techlock (SL)

Techlock (SL)【1-5,000 Pieces Per Package】

JAPAN DRIVE-IT

[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard Screw Diameter (after insertion) M (mm): 2 2.5 2.6 3 3.5 4 5 6 8 10 Length (after insertion)
[L](D = Screw Diameter M) 1 D 1.5 D 2 D 2.5 D
[Length]B (mm) 3.0 3.9 4.0 4.9 5.0 5.8

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.23 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Brass Insert Nut (Screw-In Type) IRB / IRB-C

HIROSUGI-KEIKI

[Nominal designation of thread (M)] 2/2.5/2.6/3/4/5/6/8
[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
[Treatment] Nickel plating (Ni)/degreasing

Select to compare

Configure now
Starting from^∗ ：	0.64 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Stainless Steel / Aluminum Insert Nut Threaded Type (Loosening Prevention) / IRU-W

HIROSUGI-KEIKI

[Nominal of Thread (M)] 2.6/3/4/5/6/8
[Material] Free-Cutting Stainless Steel (SUS303)
[Processing] Degreasing

Select to compare

Configure now
Starting from^∗ ：	1.34 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Promotional pricing

Brass Bit Insert (Standard, Both Faces) / HSB-Z

HIROSUGI-KEIKI

[Nominal of Thread (M)] 1.4/1.6/1.7/2/2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] Degreasing

Select to compare

Configure now
Starting from^∗ ：	0.24 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Insert bushings, Aluminium

GANTER

Drive the insert bushings GN 992 in by using a soft-head mallet. Their lamellas bridge a production tolerance of the internal diameter or of the internal square of ±0.5 mm, allowing screws to be mounted in tubes.
The dimensions match those of the construction tubes GN 990, but checking the tolerance position of the tube is recommended.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	8.90 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Threaded inserts self-tapping with cutting slot (07652)

NORELEM

· For making high-strength screw connections in materials with low shear strength

· Guarantees secure and firm anchoring in the host material

· Ideal for difficult-to-machine materials

· Version: steel or stainless steel

Select to compare

Configure now
Starting from^∗ ：	0.43 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

HeliCoil®plus threaded inserts (07645)

NORELEM

· For repairing damaged threads

· For making high-strength screw connections in materials with low shear strength

· Resistant to corrosive action and thermal stress

· High surface quality

· Consisting of various threaded inserts

Select to compare

Configure now
Starting from^∗ ：	1.23 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Promotional pricing

E-Certs

E-Certs【1-100 Pieces Per Package】

TSUGAMI

Old 'Heli-Coils Inserted'. The screws of the main body are reinforced, ensuring a highly durable fastening.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.70 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Stainless Steel-Insert bushings

GANTER

Drive the Stainless Steel-Insert bushings GN 992.5 in by using a soft-head mallet. Their lamellas bridge a production tolerance of the internal diameter or of the internal square of ±0.5 mm, allowing screws to be mounted in tubes.
The dimensions match those of the construction tubes GN 990, but checking the tolerance position of the tube is recommended.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	14.22 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Promotional pricing

Recoil Packet (mm)

Recoil Packet (mm)【5-10 Pieces Per Package】

RECOIL

[Type] Threaded Insert Use
[Application] Light Metal
[Materials] SUS304 with Notch
[Application] Light Metal
[Screw type] Coarse/Fine Screw Diameter (after insertion) 2 2.2 2.5 3 3.5 4 5 6 7 8 9 10 11 12 14 16 18 20 Length (after insertion)
[L](D = screw diameter M) 1D 1.5D 2D
[Sales unit] Minimum Quantity (Available for Purchase from 1 pc) Box and Pkg.
[Pitch (mm)] 0.4 0.45 0.5 0.6 0.7 0.8 1.0 1.25 1.5 1.75 2.0 2.5 Usage Environment: Internal Combustion Engines/Manufacturing Equipment Quantity 5 10

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	5.81 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Lock Recoil (Millimeter) SUS304

RECOIL

Recoil lock type insert designed to stop bolts from loosening during severe vibration or temperature changes.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1.48 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Ensat, Type 308, 3-Hole / Long Size

KKV

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1.12 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Tangless Insert Metric Coarse Phosphor Bronze

ACCURATE

We recommend using this on anti-magnetic works or locations.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.64 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Brass Ultrasert IV (Flanged) / HFU

HIROSUGI-KEIKI

[Nominal of Thread (M)] 3/4/5/6/8
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] Degreasing

Select to compare

Configure now
Starting from^∗ ：	0.54 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Promotional pricing

ART 88302 ENSAT-Thread inserts

REYHER

ENSAT inserts; Screwed inserts

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1.41 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

ART 88331 AMECOIL-Thread inserts

REYHER

AMECOIL inserts; AMECOIL-inserts; Nuts with fine thread

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1.65 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Self-Tapping Inserts Installation Tool

MISUMI

Compatible thread inserts are M3, 4, 5, 6, 8, 10 and 12.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	100.97 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Screwsert (Type SCT)

JAPAN DRIVE-IT

[Type] Self-tapping Used
[Application] Resin: General
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 3, 4, 5, 6, 8, 10, Length (following insertion)
[L](D = screw diameter M) 2D 2.5D
[Length] B (mm) 6.0 8.0 10.0 14.0 15.0 18.0

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1.03 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Tangless Insert Metric Extraction Tool (for Locking)

ACCURATE

A dedicated locking-type extraction tool.

Select to compare

Configure now
Starting from^∗ ：	158.63 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Brass Mini Bit Inserts / HMIB-Z

HIROSUGI-KEIKI

[Nominal of Thread (M)] 1.4/1.6/1.7
[Usage Method] Press-fitting / Heated Press-fitting
[Compatible Resin] Thermoplastic
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] Degreasing

Select to compare

Configure now
Starting from^∗ ：	0.39 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days
Specifications
Type
Application
Material
Screw Type
Screw Dia. M (after insertion)(mm)
Thread Dia. (After inserted), Unified(inch)
Length L (after insertion) (D = Thread Dia. M)
Notch
Shape
Sales Unit

	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	MISUMI	RECOIL	TOKAI METAL INDUSTRY	RECOIL	TOKAI METAL INDUSTRY	MISUMI	KIPP	KKV	MISUMI	ACCURATE	HIROSUGI-KEIKI	TOKAI METAL INDUSTRY	MISUMI	KKV	HIROSUGI-KEIKI	ACCURATE	MISUMI	GANTER	KKV	HIROSUGI-KEIKI	KIPP	RECOIL	REYHER	TOKAI METAL INDUSTRY	RECOIL	JAPAN DRIVE-IT	HIROSUGI-KEIKI	HIROSUGI-KEIKI	HIROSUGI-KEIKI	GANTER	NORELEM	NORELEM	TSUGAMI	GANTER	RECOIL	RECOIL	KKV	ACCURATE	HIROSUGI-KEIKI	REYHER	REYHER	MISUMI	JAPAN DRIVE-IT	ACCURATE	HIROSUGI-KEIKI
Product Series	Self-Tapping Inserts / Slotted	Insert Nitronics 60	Dodge Bit Insert (Standard) SB Brass (Cadmium-Free)【1-8,000 Pieces Per Package】	Insert Phosphor Bronze	Ultrasert UD2 / UD4 (Brass Cadmium-Free)【1-5,000 Pieces Per Package】	Thread Inserts	Threaded inserts self-tapping with cutting slot (K0978)	Ensat, Slotted Type 302	Tangless Inserts Installation / Removal Tools	Tangless Insert Insertion Tool	Stainless Steel / Insert Nut Threaded Type (Slotted) / IRU-S	Dodge Bit Insert Flange Type (Brass Cadmium-Free)【1-5,000 Pieces Per Package】	Thread Inserts / Tangless	Ensat, Chip-Free / Short, Type 337	Brass Bit Insert (Flanged) / HFB	Tangless Insert Manual Pre-Winder Tool	Thread Insert Installation Tool	Serrated locking plates, Stainless Steel	Ensat, Ultra Coarse Outside Screw, Type 309	Stainless Steel / Insert Nut Threaded Type / IRU	Threaded Inserts (K0398)	Insert, Inconel X-750	DIN 7965 Screwed inserts	DODGE BET Insert (Standard), Double Sided Chamfer Type, Brass (Cadmium-Free)【1-15,000 Pieces Per Package】	Recoil-Free (mm) SUS304【1-3 Pieces Per Package】	Techlock (SL)【1-5,000 Pieces Per Package】	Brass Insert Nut (Screw-In Type) IRB / IRB-C	Stainless Steel / Aluminum Insert Nut Threaded Type (Loosening Prevention) / IRU-W	Brass Bit Insert (Standard, Both Faces) / HSB-Z	Insert bushings, Aluminium	Threaded inserts self-tapping with cutting slot (07652)	HeliCoil®plus threaded inserts (07645)	E-Certs【1-100 Pieces Per Package】	Stainless Steel-Insert bushings	Recoil Packet (mm)【5-10 Pieces Per Package】	Lock Recoil (Millimeter) SUS304	Ensat, Type 308, 3-Hole / Long Size	Tangless Insert Metric Coarse Phosphor Bronze	Brass Ultrasert IV (Flanged) / HFU	ART 88302 ENSAT-Thread inserts	ART 88331 AMECOIL-Thread inserts	Self-Tapping Inserts Installation Tool	Screwsert (Type SCT)	Tangless Insert Metric Extraction Tool (for Locking)	Brass Mini Bit Inserts / HMIB-Z
CAD	2D / 3D					2D / 3D	2D / 3D		2D / 3D				2D / 3D				2D / 3D	2D / 3D			2D / 3D									2D / 3D				2D / 3D								2D / 3D
Starting from^∗	1.24 € *Unit price with basic configuration Volume Discount	2.80 € *Unit price with basic configuration Volume Discount	0.16 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	1.02 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.20 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	1.03 € *Unit price with basic configuration Volume Discount	0.36 € *Unit price with basic configuration	0.48 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	164.48 € *Unit price with basic configuration Volume Discount	116.01 € *Unit price with basic configuration	1.34 € *Unit price with basic configuration	0.29 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	1.90 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	1.06 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.42 € *Unit price with basic configuration	475.02 € *Unit price with basic configuration Volume Discount	91.10 € *Unit price with basic configuration Volume Discount	11.38 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.50 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.98 € *Unit price with basic configuration	3.69 € *Unit price with basic configuration	20.98 € *Unit price with basic configuration Volume Discount	0.36 € *Unit price with basic configuration Volume Discount	0.19 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.74 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.23 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.64 € Special price *Unit price with basic configuration Promotional pricing	1.34 € *Unit price with basic configuration	0.24 € Special price *Unit price with basic configuration Promotional pricing	8.90 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.43 € *Unit price with basic configuration	1.23 € *Unit price with basic configuration	0.70 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	14.22 € *Unit price with basic configuration Volume Discount	5.81 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	1.48 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	1.12 € *Unit price with basic configuration Volume Discount	0.64 € *Unit price with basic configuration Volume Discount	0.54 € *Unit price with basic configuration	1.41 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	1.65 € *Unit price with basic configuration Volume Discount	100.97 € *Unit price with basic configuration Volume Discount	1.03 € *Unit price with basic configuration Volume Discount	158.63 € *Unit price with basic configuration	0.39 € *Unit price with basic configuration
Min. Shipping Days	Same day	Same day	Same day	Same day	Same day	Same day	4 Days	Same day	5 Days	Same day	12 Days	Same day	Same day	Same day	5 Days	5 Days	5 Days	Same day	Same day	12 Days	4 Days	5 Days	2 Days	Same day	Same day	Same day	Same day	12 Days	Same day	Same day	4 Days	4 Days	Same day	7 Days	Same day	Same day	Same day	9 Days	12 Days	Same day	3 Days	Same day	Same day	9 Days	5 Days
Specifications								Stock	Stock			Stock					Stock								Stock
Type	Self-Tapping	Standard	Standard	Standard	Standard	Standard	-	Self-Tapping	Tool	Tool	Self-Tapping	Standard	Tangless	Self-Tapping	Press Fit	Tool	Tool	-	Self-Tapping	Self-Tapping	-	Standard	-	Standard	Standard	Press Fit	Self-Tapping	Self-Tapping	Press Fit	-	-	-	Standard	-	Standard	Standard	Self-Tapping	Tangless	Press Fit	-	-	Tool	Self-Tapping	Tool	Press Fit
Application	Light Metal	Light Metal	Resin General	Light Metal	Resin General	Light Metal	-	-	-	-	Cast Iron	Resin General	Light Metal	-	Light Metal	-	-	-	-	Cast Iron	-	Light Metal / Cast Iron	-	Resin General	Light Metal	-	Light Metal	Cast Iron	Light Metal	-	-	-	Light Metal / Cast Iron / Resin General	-	Light Metal	Light Metal	-	Light Metal / Cast Iron / Resin General	Light Metal	-	-	-	Resin General	-	Light Metal
Material	Steel / Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Nitrox 60	Brass	Phosphor Bronze	Brass	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Steel / Stainless steel	Steel / Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) / Stainless Steel (EN 1.4016 Equiv.) / Brass	-	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Brass	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Steel / Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) / Stainless Steel (EN 1.4016 Equiv.)	Brass	-	-	Stainless Steel	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) / Brass	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Steel / Stainless steel	Inconel X-750	Steel / Brass	Brass	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Brass	Brass	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Brass	-	Steel / Stainless steel	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Steel / Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) / Stainless Steel (EN 1.4016 Equiv.)	Phosphor Bronze	Brass	-	-	-	Brass	-	Brass
Screw Type	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread / Metric (Fine) Thread	-	Metric (Coarse) Thread	-	-	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	-	-	-	Metric (Coarse) Thread	Metric (Coarse) Thread	-	Metric (Coarse) Thread	-	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	-	-	-	Metric (Coarse) Thread	-	Metric (Coarse) Thread / Metric (Fine) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	-	-	-	Metric (Coarse) Thread	-	Metric (Coarse) Thread
Screw Dia. M (after insertion)(mm)	3 ～ 12	3 ～ 12	1.6 ～ 8	3 ～ 24	2 ～ 10	3 ～ 16	-	2.5 ～ 30	-	-	2.6 ～ 8	2 ～ 8	2.5 ～ 10	3 ～ 12	2 ～ 5	-	-	-	3 ～ 16	2 ～ 8	-	3 ～ 12	3 ～ 12	1.4 ～ 6	2 ～ 42	2 ～ 10	2 ～ 8	2.6 ～ 8	1.4 ～ 5	M 8 ～ M 16	-	-	2 ～ 24	M 8 ～ M 16	2 ～ 20	3 ～ 24	3 ～ 16	3 ～ 6	3 ～ 8	-	-	-	3 ～ 8	-	1.4 ～ 1.7
Thread Dia. (After inserted), Unified(inch)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Length L (after insertion) (D = Thread Dia. M)	-	1D / 1.5D / 2D	1D / 1.5D / 2D / 2.5D / 3D	1D / 1.5D / 2D	1D / 1.5D / 2D	1D / 1.5D / 2D / 3D	-	-	-	-	1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D	1D / 1.5D / 2D / 2.5D / 3D	1D / 1.5D / 2D	-	1D / 1.5D / 2D / 2.5D / 3D	-	-	-	-	1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3.5D	-	1D / 1.5D / 2D	-	1D / 1.5D / 2D / 2.5D / 3D / 0.7D	1D / 1.5D / 2D / 2.5D / 3D	1D / 1.5D / 2D / 2.5D	1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3.5D	1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D	1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3.5D / 4D	-	-	-	1D / 1.5D / 2D / 2.5D / 3D / 0.5D	-	1D / 1.5D / 2D	1D / 1.5D / 2D	-	1D / 1.5D / 2D	1.5D / 2D / 2.5D	-	-	-	2D / 2.5D	-	1.5D / 2D
Notch	Not Provided	Provided	Not Provided	Provided	Not Provided	Provided	-	-	-	-	Not Provided	Not Provided	Not Provided	-	Not Provided	-	-	-	-	Not Provided	-	Provided	-	Not Provided	Provided	Not Provided	Not Provided	Not Provided	Not Provided	-	-	-	Provided	-	Provided	Provided	-	-	Not Provided	-	-	-	Not Provided	-	Not Provided
Shape	Slotted	-	Standard	-	Standard	-	-	Slotted	-	-	Slotted	Standard	-	Tip Free Type	Standard	-	-	-	Standard	Standard	-	-	-	Standard	-	Standard	Standard	Standard	Standard	-	-	-	-	-	-	-	3-Hole Type	-	Standard	-	-	-	Standard	-	Standard
Sales Unit	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.)	-	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	-	Box, Pkg.	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	-	Low Quantity (Available beginning with 1 pc.)	-	Low Quantity (Available beginning with 1 pc.)	Box, Pkg.	-	Low Quantity (Available beginning with 1 pc.)	-	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Box, Pkg.	Box, Pkg.	Box, Pkg.	-	-	-	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	-	Box, Pkg.	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	-	Box, Pkg.	-	-	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	-	Box, Pkg.