Rubber Seal（Page 2）

?* Information on days to ship and prices

• 

  Casing Ring, PTFE 177023, with O-ring 72NBR872

  FREUDENBERG

  [Specifications]
  ・Profile ring material: PTFE bronze compound
  ・O-ring material: Nitrile rubber NBR
  ・Colour: Profile ring: Black, O-ring: Brown
  ・REACH: SVHC candidate
  
  [Features]
  ・Double-acting piston seal for the lower pressure range with the properties of Low friction and low housing height

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	9.40 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Chevron Seal Set, FKM, Rubber and Fabric

  FREUDENBERG

  [Specifications]
  ・Material: BI-FKM B4K674
  ・Series: ESV
  ・Colour: Brown
  
  [Features]
  ・Field-proven under ul tra-tough conditions
  ・Long useful lifetime
  ・Can be optimally matched to the application concerned
  ・Functions for a certain period even on poor surfaces
  ・Depending on the application and design involved, fluctuations in the leakage and friction behavior must be anticipated

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	835.92 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  Chevron Seal Set, NBR B4B246

  FREUDENBERG

  [Specifications]
  ・Material: BI-NBR B4B246
  ・Series: ES
  ・Colour: Black
  ・Outer Diameter(mm): 210
  
  [Features]
  ・Field-proven under ul tra-tough conditions
  ・Long useful lifetime
  ・Can be optimally matched to the application concerned
  ・Functions for a certain period even on poor surfaces
  ・Depending on the application and design involved, fluctuations in the leakage and friction behavior must be anticipated

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	296.52 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  Hat Seal, with Spring, 88NBR101

  FREUDENBERG

  [Specifications]
  ・Type: Rod Seals (Hydraulic)
  ・Material: Nitrile rubber NBR
  ・Material Code: 88 NBR 101
  ・Series: H
  ・Colour: Black
  
  [Features]
  ・Single-acting rod seal for less important applications and spare parts requirements

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	22.26 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Piston Seal, 5-part, 80NBR-B281, L43

  FREUDENBERG

  [Specifications]
  ・Material: Sealing component: Nitrile rubber, Back-up ring: Polyester elastomer, Angled bush: Polyamide with special filling
  ・Series: L43
  
  [Features]
  ・The Merkel Piston Seal L 43 is used for sealing pistons with pressure on both sides
  ・The angled rings guide the piston on the cylinder bore
  ・No extrusion into the radial sealing gap
  ・Suitable for rapid pressure change
  ・Sealing component protected against twisting

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	30.32 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Simko Compact Seal, 98AU928, with Retaining Ring 72NBR872

  FREUDENBERG

  [Specifications]
  ・Profile ring material: Polyurethane
  ・Profile ring material code: 98 AU 928
  ・Contact pressure element material: Nitrile rubber NBR
  ・Contact pressure element material code: 80 NBR 709
  
  [Features]
  ・Good static and dynamic tightness
  ・Low friction, smooth movement even at low running speeds
  ・Contact pressure element with rectangular cross-section, prevents twisting in the housing
  ・Standardised housings according to ISO 7425
  ・Low axial housing heights

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	14.90 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  U-ring, Piston, 80NBR878

  FREUDENBERG

  [Specifications]
  ・Sealing component material: Nitrile rubber NBR, Back-up ring: Polyacetal
  ・Colour: Profile ring: Darkbrown
  ・Series: NA250
  
  [Features]
  ・Single-acting piston seal for medium load, preferably for spare parts requirement

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	13.57 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  U-ring, Rod, 70NBR-B209 + Fabric

  FREUDENBERG

  [Specifications]
  ・Material: Nitrile rubber NBR
  ・Color: black
  ・Series: S8
  ・Hardness in Shore: 70
  
  [Features]
  ・Easy to assembly
  ・Excellent sealing action also in the low-pressure range
  ・Low friction due to fabric part

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.03 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Wiper-rod Seal, 72NBR708

  FREUDENBERG

  [Specifications]
  ・Material: Seal: Acrylonitrile-butadiene rubber, Base plate: mild steel according to DIN 1624
  ・Seal material code: 72 NBR 708
  ・seal colour: black
  
  [Features]
  ・Combination seal with minimal space requirements, which seals inwards and wipes outwards
  ・The component can be replaced from the outside (without dismantling the equipment)
  ・Broad supply range

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	21.30 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Wiper-rod Seal, 80NBR4005

  FREUDENBERG

  [Specifications]
  ・Material: Seal: NBR rubber
  ・Material code: 80 NBR 4005
  ・colour: black
  
  [Features]
  ・Combination seal with minimal space requirements, which seals inwards and wipes outwards
  ・The special pneumatic sealing edge gives very good tightness with low friction and maintains an effective lubricating film

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	10.70 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  GPY Packing for Pneumatic Pressure

  SAKAGAMI SEISAKUSHO

  A dedicated packing for pistons that uses an abrasion-resistant material. The sectional dimensions for the diameter sizes are larger than the SKY packing. Highly durable to prevent causing counterpressure damage.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	9.54 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  [Hydraulic Use] RGU Packing

  SAKAGAMI SEISAKUSHO

  Sealing performance equivalent to U packing is provided thanks to a unique two-pressure one-ring shape with a seal lip, and the piston component is compact.
  
  [Features]
  · Depending on the position of the equipped groove, there may be cases where equipping to an integral groove is not possible.
  · Please use a split groove structure these cases.
  · ⌀DH9/f8 changes based on the bearing system.
  · When using this product with a wear ring, please refer to the wear ring dimensions table.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	13.15 €
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  [Oil Pressure Use] NMY Packing

  SAKAGAMI SEISAKUSHO

  U packing exclusively for use with rods that have a small cross-sectional design; compatible with JIS B 2401 P O-rings. Produces sealing that is superior to O-rings and has excellent friction characteristics.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.40 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  [Oil Pressure Use] RGY Packing

  SAKAGAMI SEISAKUSHO

  Packing for SKY packing-compatible pistons. Abrasion-resistant materials. Shape designed to help prevent counterpressure damage.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.95 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  STK Seals for Rotary / Oscillating Motion, Hydraulic Pressure, STR Type

  SAKAGAMI SEISAKUSHO

  Seal combining an S-FLON (PTFE) seal ring and synthetic rubber square-ring. A low-friction seal for rotation and oscillating motion.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	34.47 €
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  SWB Wear Rings for Light Loads

  SAKAGAMI SEISAKUSHO

  A piston bearing made of fabric-reinforced phenolic resin. Demonstrates excellent load tolerance. installs into single grooves to prevent seizing and galling of pistons. This product is mainly for use with pneumatic cylinders.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.04 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  [Oil Pressure Use] WRB E-Sleeve

  SAKAGAMI SEISAKUSHO

  A multi-use piston bearing with back-up ring, for use with packings groove compatible with SKY packing. Can be mounted to an integrated groove.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	11.42 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  [Oil Pressure Use] PWL Bearing

  SAKAGAMI SEISAKUSHO

  By using this product in combination with RGU packing, it can be integrally attached to a groove with an embedded type plastic combined backup ring / bearing.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	13.07 €
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  SCB, Scraper Retaining Ring (DSP)

  SAKAGAMI SEISAKUSHO

  A retaining ring used only when a retaining ring method is utilized to prevent the SCB scraper from flying off.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.88 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Sealing rings, Hygienic Design (GN 7600)

  GANTER

  Components with cylindrical mounting surfaces which are installed in hygiene areas can be sealed and mounted without dead spaces using GN 7600 sealing rings.
  
  As delivered, or unassembled, the sealing rings haver the “actual dimensions” as stated in the table. To ensure a firm seating and reliable sealing, an installation space must be provided in the component as shown in the diagram. This ensures that when the sealing ring is installed, it will be subject to the necessary pressure without excess load. All surfaces which are in contact with the sealing ring should have a minimum surface quality of Ra 0.8 µm.
  
  Ganter standard parts which are supplied with GN 7600 sealing rings are listed in the table and can be supplied individually in case service is required.
  

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.36 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  DICHTOMATIK Scraper Design AM54

  DICHTOMATIK

  [Specifications]
  ・Engineering material: TPU
  ・Base color: Blue
  ・Series: AM54
  ・Version: Metal-reinforced
  ・Norm: DIN 3602
  
  [Features]
  ・Good wiping properties against dirt
  ・High wear resistance
  ・No pressure relief hole required
  ・Axially open, easy-to-fabricate installation space
  ・Reliable design with broad application spectrumfor moderately demanding applications in general industry

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

• 

  DICHTOMATIK Scraper Design AE41

  DICHTOMATIK

  [Specifications]
  ・Type: Scraper
  ・Material: NBR
  ・Base color: black
  ・Series: AE41
  ・Norm: DIN 3602
  
  [Features]
  ・Additional diameter step on the outer seat leads to stronger sealing and wiping effect
  ・Good wiping properties against dirt
  ・Very good wiping ability against dirt
  ・No pressure relief hole required
  ・Ribs on the inner diameter ensure a functionally correct fit
  ・Particularly suitable for high stroke speeds
  ・Reliable design with broad application spectrum for moderately demanding applications in general industry

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

• 

  DICHTOMATIK Scraper Design AM45

  DICHTOMATIK

  [Specifications]
  ・Type: Scraper
  ・Sealing material: NBR
  ・Reinforcement material: Unalloyed steel DIN EN10139 (DIN 1624)
  ・Base color: Blue
  ・Series: AM44
  ・Norm: DIN 3602
  
  [Features]
  ・Good wiping properties against dirt
  ・High wear resistance
  ・No pressure relief hole required
  ・Axially open, easy-to-fabricate installation space
  ・Reliable design with broad application spectrum for moderately demanding applications in general industry

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

• 

  Airzet Rod Seal, 75FKM230553

  FREUDENBERG

  [Specifications]
  ・Material: 75 FKM 230553
  ・Hardness in Shore: 75
  ・REACH: SVHC candidate
  
  [Features]
  ・The compact design permits short cylinder cover designs
  ・The rounded sealing profile and the flexible centre part give good tightness with low friction and maintain an effective lubricating film
  ・Widely proven design
  ・Large supply range available
  ・Very good tribological properties (wear, friction and long service life)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	20.25 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Chevron Seal Set, Rod, FKM

  FREUDENBERG

  [Specifications]
  ・Material: BI-FKM B3K674, BI-FKM B4K674
  ・Series: ES, ESV
  ・Colour: Brown, Black
  
  [Features]
  ・Field-proven under ul tra-tough conditions
  ・Long useful lifetime
  ・Can be optimally matched to the application concerned
  ・Functions for a certain period even on poor surfaces
  ・Depending on the application and design involved, fluctuations in the leakage and friction behavior must be anticipated

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	96.08 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  Chevron Seal Set, Rod, NBR

  FREUDENBERG

  [Specifications]
  ・Material: BI-NBR B4B246
  ・Series: ES
  ・Colour: Black
  
  [Features]
  ・Field-proven under ul tra-tough conditions
  ・Long useful lifetime
  ・Can be optimally matched to the application concerned
  ・Functions for a certain period even on poor surfaces
  ・Depending on the application and design involved, fluctuations in the leakage and friction behavior must be anticipated

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	22.57 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Forseal Piston Seal, PTFE F56110

  FREUDENBERG

  [Specifications]
  ・Material: PTFE F56110
  ・Series: FOA
  ・Colour: Black
  
  [Features]
  ・High chemical resistance
  ・Low friction even at low speed
  ・High wear resistance
  ・Suitable for dry running and insufficient lubrication
  ・Wide temperature range
  ・No stick-slip effect
  ・High extrusion safety
  ・Market-leading, in-house developed design with widest range of applications in all industrial sectors and for a wide range of requirements
  ・Highest quality, durability and safety

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	22.98 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Forseal Rod Seal, PTFE F56110

  FREUDENBERG

  [Specifications]
  ・Material: PTFE F56110
  ・Series: FOI
  ・Colour: Black
  
  [Features]
  ・High chemical resistance
  ・Low friction even at low speed
  ・High wear resistance
  ・Suitable for dry running and insufficient lubrication
  ・Wide temperature range
  ・No stick-slip effect
  ・High extrusion safety
  ・Market-leading, in-house developed design with widest range of applications in all industrial sectors and for a wide range of requirements
  ・Highest quality, durability and safety

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	38.89 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  L-section Ring, for Package, PTFE-F52902

  FREUDENBERG

  [Specifications]
  ・Type: L-section Ring, for Package
  ・Material: PTFE F52902
  ・Series: TFW
  ・Colour: Anthracite
  
  [Features]
  ・High chemical resistance
  ・High temperature resistant
  ・Low breakaway force even after long downtimes
  ・Low friction
  ・Highest quality
  ・Long service life

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	35.62 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Piston Seal, HDP

  FREUDENBERG

  [Specifications]
  ・Material: Sliding Ring: Fiberglass filled and modified Polyamide, Energizing Element: Nitrile Rubber
  ・Sliding Ring Material code: PA 4112
  ・Energizing Element Material code: 70 NBR 177605
  ・Series: HDP
  
  [Features]
  ・Well suited for extreme operating conditions, including working pressures up to 60 MPa
  ・Particularly high abrasion resistance ensures long maintenance intervals, even with lower quality counter surfaces
  ・Highest resistance to gap extrusion
  ・Dynamic and static tightness analogous to PTFE piston seals
  ・Stepped cut in the seal ring simplifies installation in closed piston groove
  ・Rectangular energizing element generates a constantly high contact pressure and offers high protection against twisting in the installation space
  ・Mounting in standardized installation spaces according to DIN ISO 7425-1

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	31.43 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  Piston Seal, PTFE-glass, OMK-S

  FREUDENBERG

  [Specifications]
  ・PTFE Profile Ring material: PTFE GM201, Elastomer profile ring: NBR
  ・Colour: Profile ring: light gray
  ・Series: OMK-S
  
  [Features]
  ・Very high stability under pressure
  ・High torsional safety
  ・Very good extrusion safety
  ・High resistance to abrasion
  ・Good thermal conductivity
  ・Low friction, stick-slip free
  ・High contact pressure due to the elastomer profile ring

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	158.49 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  Rod Seal, 94AU21200

  FREUDENBERG

  [Specifications]
  ・Material: Polyurethane
  ・Material code: 94 AU 925
  ・Colour: Blue
  ・Series: AUNIPSL
  
  [Features]
  ・Combination wiper seal without metal reinforcement with special pneumatic sealing edge
  ・Combination seal with minimal space requirements, which seals inwards and wipes outwards
  ・The component needs no additional element (circlip) for axial fixing within the housing
  ・Robust design

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	15.45 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Rod Seal, PTFE-glass, with O-ring NBR, OMS-MR

  FREUDENBERG

  [Specifications]
  ・Profile Ring: PTFE-glass-fiber-MoS2 Compound: PTFE GM201
  ・Profile Ring color: light gray
  ・O-Ring material: Nitrile Rubber NBR
  ・Series: OMS-MR
  
  [Features]
  ・Very high stability under pressure
  ・Good thermal conductivity
  ・Very good extrusion safety
  ・High resistance to abrasion
  ・Low friction, stick-slip free

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.00 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Rod Seal, PTFE-Glass / MoS2 + 80NBR

  FREUDENBERG

  [Specifications]
  ・Profile Ring: PTFE-glass-fiber-MoS2 Compound: PTFE GM201
  ・Profile Ring color: light gray
  ・Elastomer profile ring: Nitrile Rubber NBR
  ・Series: OMS-S
  
  [Features]
  ・Very high stability under pressure
  ・High torsional safety
  ・Very good extrusion safety
  ・High resistance to abrasion
  ・Low friction, stick-slip freey
  ・High contact pressure due to the elastomer profile ring

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	923.28 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  U-ring, Piston, 94AU925

  FREUDENBERG

  [Specifications]
  ・Material: Polyurethane
  ・Material code: 94 AU 925
  ・Color: blue
  
  [Features]
  ・Single-acting piston seal for standardised housings, amongst others, according to ISO 5597
  ・Very good static and dynamic tightness

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	6.43 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Wiper-rod Seal, 75FKM181327

  FREUDENBERG

  [Specifications]
  ・Material: FKM rubber
  ・Material code: 75 FKM 181327
  ・Colour: green
  
  [Features]
  ・Combination seal with minimal space requirements, which seals inwards and wipes outwards
  ・The special pneumatic sealing edge gives very good tightness with low friction and maintains an effective lubricating film
  ・Suitable for high-temperature applications

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	30.78 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Seal Ring DIN【10 Pieces Per Package】

  IFM ELECTRONIC

  [Specifications]
  ・Type: Seal Ring
  ・Material: FKM
  ・External Diameter(mm) : 16.5 / 23.9 / 35.7
  ・Inside Diameter(mm) : 11.6 / 18.5 / 29.7
  
  [Features]
  ・For reliably sealing tanks, containers and pipes
  ・For use in combination with process sensors

  Select to compare

  Configure now
  Starting from∗ ：	10.31 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  [Oil Pressure Use] Back-Up Ring, Standard TC-GPY

  SAKAGAMI SEISAKUSHO

  Standard backup ring dedicated to GPY packing. (Maximum operating pressure: 25 MPa)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	6.01 €
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• 

  [Oil Pressure Use] (T) SGY Packing

  SAKAGAMI SEISAKUSHO

  Dedicated packing for use with pistons which is compatible with SKY packing and grooves. Usable at temperatures of -45 to 100°C, which effectively eliminates the need for gasket replacement even in cold places in Japan and abroad.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	10.32 €
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• 

  [Oil Pressure Use] (Y) SNY Packing

  SAKAGAMI SEISAKUSHO

  Dedicated packing for use with rods which is compatible with SKY packing and grooves. Usable at temperatures of -45 to 100°C, which effectively eliminates the need for gasket replacement even in cold places in Japan and abroad.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.42 €
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• 

  [Oil Pressure Use] Back-Up Ring, Standard TC-GNY

  SAKAGAMI SEISAKUSHO

  Dedicated standard backup ring for use with GNY packing. (Maximum operating pressure: 25 MPa)

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	15.81 €
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  SMJ Seals for Hydraulic Pressure

  SAKAGAMI SEISAKUSHO

  Seal for rods combining an S-FLON (PTFE) seal ring and a synthetic rubber O-ring. Superior sealability, high-speed and low-speed performance (static-slip performance).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	16.00 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  STK Seals for Reciprocating Motion, Hydraulic Pressure, STG Type

  SAKAGAMI SEISAKUSHO

  Seal combining an S-FLON (PTFE) seal ring and a synthetic rubber O-ring. Low friction — does not cause static slip even at low pressure and low speed.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	37.24 €
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• 

  [Air Pressure Use] PNY Packing

  SAKAGAMI SEISAKUSHO

  Wear-resistant packing exclusively designed for rods. It maintains stable adhesion performance under conditions ranging from oil-lubricated, oil free, to dry air.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.79 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  [Air Pressure Use] GLY Packing

  SAKAGAMI SEISAKUSHO

  Dual use packing for pistons and rods used in pneumatic cylinders. Exclusively for use with oil-free applications; cannot be used with oil supply cylinders.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.78 €
  	Special price
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

Loading...