Rejestracja

Tłumaczymy nasz sklep na język polski!

Wymaga to jednak czasu, ponieważ w ofercie mamy dużo artykułów, a na nasz sklep składa się wiele stron. Chwilowo nasz katalog produktów dostępny będzie w języku angielskim. Dziękujemy za cierpliwość!
Warunki filtrowania

Wyczyść wszystko

  • Stan magazynowy
  • Type
  • Length L *Figure in () is the min length of the adjustable type.(mm)
  • Operating Environment
  • Environmentally Friendly
  • CAD
  • Detachable Hinges

    Lift-off/flag hinges are fittings used to open and close doors and lids, and these types of hinges help install doors and lids by pulling out and inserting. They allow doors or lids to be installed/removed easily to/from the door frames without having to remove the hinges. There are 2 types of lift-off/flag hinges, one type has two leafs, a male leaf with an attached pin and a female leaf with a receptacle for the pin, and another type has the upper and lower leafs and an independent pin. Unlike other hinges, these hinges cannot be used in the horizontal direction; they must be used only in the vertical direction. Their materials are stainless steel, steel, resin, aluminum , zinc alloy, etc. Lift-off/flag hinges have right-hand, left-hand and reverse orientations. Make sure to select the correct hinge type. In order to control dispersion of metal powder due to wear, some have a built-in bearing in the sliding part and some have a resin cap.
      • Stainless Steel Lift-Off Hinge SHHPSL/SHHPSLC/SHHPSR/SHHPSRC
        • ZNIŻKA
        • Volume Discount
        • Order quantities extended (D-JIT)
        • Stock

        MISUMI

        Stainless Steel Lift-Off Hinge SHHPSL/SHHPSLC/SHHPSR/SHHPSRC

        [Features] A universal stainless steel (EN 1.4301 Equiv. (sintered)) lift-off hinge.
        Czytaj dalej
        TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
        Detachable HingesStandard41 ~ 113-Stainless SteelNot Provided36 ~ 80Not ProvidedFor Right Side / For Left Side
        Cena (bez VAT) od:
        6.48 €
        Cena specjalna
        Standardowa data wysyłki:
        Towar dostępny w magazynie: 1 dzień roboczy
        Niektóre pozycje mogą zostać wysłane tego samego dnia
        Konfiguruj
      • Corner hinges, plug-in / conical countersinks / stainless steel / barrel polished / MISUMI
        • Volume Discount
        • Order quantities extended (D-JIT)

        MISUMI

        Corner hinges, plug-in / conical countersinks / stainless steel / barrel polished / MISUMI

        [Features] Stainless steel lift-off hinge that is compact and looks neat.
        Czytaj dalej
        TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
        Detachable HingesStandard35 ~ 80-Stainless SteelTumble Polish8 ~ 14.5Not ProvidedFor Both Right and Left Sides
        Cena (bez VAT) od:
        13.10 €
        Standardowa data wysyłki:
        Towar dostępny w magazynie: 1 dzień roboczy
        Niektóre pozycje mogą zostać wysłane tego samego dnia
        Konfiguruj
      • Flat plug-in hinges / cylindrical countersinks / POM bush / stainless steel / cloth polished / MISUMI
        • Volume Discount
        • Order quantities extended (D-JIT)

        MISUMI

        Flat plug-in hinges / cylindrical countersinks / POM bush / stainless steel / cloth polished / MISUMI

        TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
        Detachable HingesStandard50 ~ 100-Stainless SteelBuffed Surface50 ~ 100Not ProvidedFor Right Side / For Left Side
        Cena (bez VAT) od:
        18.90 €
        Standardowa data wysyłki:
        Towar dostępny w magazynie: 1 dzień roboczy
        Możliwa wysyłka tego samego dnia
        Konfiguruj
      • Flat plug-in hinges / unpunched / weldable / rolled / stainless steel, steel / bright, chromated (III-value) / MISUMI
        • ZNIŻKA
        • Volume Discount

        MISUMI

        Flat plug-in hinges / unpunched / weldable / rolled / stainless steel, steel / bright, chromated (III-value) / MISUMI

        [Features] A special hinge for welding installation without holes. [Mounting method] Weld-on
        Czytaj dalej
        TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
        Detachable HingesStandard50 ~ 100-Stainless Steel / SteelMirror Surface / Trivalent Chromate40 ~ 82Not ProvidedFor Right Side / For Left Side
        Cena (bez VAT) od:
        3.78 €
        Cena specjalna
        Standardowa data wysyłki:
        Towar dostępny w magazynie: 1 dzień roboczy
        Niektóre pozycje mogą zostać wysłane tego samego dnia
        Konfiguruj
      • Corner hinges, plug-in / weldable / brass Spacer rings / steel / GN 128 / GANTER
        • ZNIŻKA
        • Volume Discount

        GANTER

        Corner hinges, plug-in / weldable / brass Spacer rings / steel / GN 128 / GANTER

        Hinges GN 128 are produced from drawn weldable profiled steel extrusions.Types ST, STS and MS feature a hinge pin fixed in the lower half of hinge. Type STL with loose steel pin allows the easy installation when attaching several hinges in parallel or if the door is very heavy.The upper half of Type STS hinge has an additional lubricating nipple DIN 71412-D which allows the hinges to be lubricated without dismantling the hinges.
        Czytaj dalej
        TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
        ------40 ~ 200--
        Cena (bez VAT) od:
        2.60 €
        Cena specjalna
        Standardowa data wysyłki:
        Towar dostępny w magazynie: 1 dzień roboczy
        Niektóre pozycje mogą zostać wysłane tego samego dnia
        Konfiguruj
      • Aluminium Lift-Off Hinge Counterbore Hole Type
        • ZNIŻKA
        • Volume Discount
        • Order quantities extended (D-JIT)
        • Stock

        MISUMI

        Aluminium Lift-Off Hinge Counterbore Hole Type

        [Features] Aluminium. -Surface treatment available in 3 variants.
        Czytaj dalej
        TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
        Detachable HingesStandard80-AluminumCoating / Shot Blasting41 ~ 83Not ProvidedFor Right Side / For Left Side
        Cena (bez VAT) od:
        4.97 €
        Cena specjalna
        Standardowa data wysyłki:
        Towar dostępny w magazynie: 1 dzień roboczy
        Niektóre pozycje mogą zostać wysłane tego samego dnia
        Konfiguruj
      • Flag hinges / conical countersunk / demountable / POM beech / extruded aluminium / MISUMI
        • Volume Discount
        • Order quantities extended (D-JIT)

        MISUMI

        Flag hinges / conical countersunk / demountable / POM beech / extruded aluminium / MISUMI

        [Features] A universal aluminium sliding hinge. [Material] Main body EN AW-6063 Equiv.
        Czytaj dalej
        TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
        Detachable HingesFlag Type71.7 ~ 101.7-AluminumClear Anodize48 ~ 80Not ProvidedFor Right Side / For Left Side
        Cena (bez VAT) od:
        3.84 €
        Standardowa data wysyłki:
        Towar dostępny w magazynie: 1 dzień roboczy
        Niektóre pozycje mogą zostać wysłane tego samego dnia
        Konfiguruj
      • Aluminium Lift-Off Hinge Countersunk Type
        • Order quantities extended (D-JIT)

        MISUMI

        Aluminium Lift-Off Hinge Countersunk Type

        [Features] An aluminium all-purpose lift-off hinge. The maximum opening and closing angle is approximately 270 degrees. This product can be inserted and removed.
        Czytaj dalej
        TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
        Detachable HingesStandard47 ~ 63-AluminumClear Anodize36 ~ 62Not ProvidedFor Right Side / For Left Side
        Cena (bez VAT) od:
        5.47 €
        Standardowa data wysyłki:
        Towar dostępny w magazynie: 1 dzień roboczy
        Niektóre pozycje mogą zostać wysłane tego samego dnia
        Konfiguruj
      • Flat plug-in hinges / conical countersinks / rolled / stainless steel / mirror polished / B-1065 / TAKIGEN
        • ZNIŻKA
        • Volume Discount

        TAKIGEN

        Flat plug-in hinges / conical countersinks / rolled / stainless steel / mirror polished / B-1065 / TAKIGEN

        Made from stainless steel for superior corrosion resistance. Right side type and left side type available.
        Czytaj dalej
        TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
        Detachable HingesStandard50 ~ 125-Stainless SteelMirror Surface40 ~ 100-For Right Side / For Left Side
        Cena (bez VAT) od:
        6.37 €
        Cena specjalna
        Standardowa data wysyłki:
        Towar dostępny w magazynie: 1 dzień roboczy
        Niektóre pozycje mogą zostać wysłane tego samego dnia
        Konfiguruj
      • Flat plug-in hinges / conical countersinks / rolled / stainless steel / mirror polished / B-1075 / TAKIGEN
        • Volume Discount
        • Stock

        TAKIGEN

        Flat plug-in hinges / conical countersinks / rolled / stainless steel / mirror polished / B-1075 / TAKIGEN

        [Features]· Made of stainless steel, with excellent corrosion resistance.· Right type/left type
        Czytaj dalej
        TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
        Detachable HingesStandard40-Stainless SteelMirror Surface30-For Right Side / For Left Side
        Cena (bez VAT) od:
        3.82 €
        Standardowa data wysyłki:
        Towar dostępny w magazynie: 1 dzień roboczy
        Możliwa wysyłka tego samego dnia
        Konfiguruj
      • Plug-in hinges / joint raised / stainless steel / cloth polished / MISUMI
        • ZNIŻKA
        • Volume Discount
        • Order quantities extended (D-JIT)
        • Stock

        MISUMI

        Plug-in hinges / joint raised / stainless steel / cloth polished / MISUMI

        A stainless steel lift-off hinge suitable for 3 mm and 5 mm thick panel mounting.
        Czytaj dalej
        TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
        Detachable HingesStepped Type60-Stainless SteelBuffed Surface40Not ProvidedFor Right Side / For Left Side
        Cena (bez VAT) od:
        7.52 €
        Cena specjalna
        Standardowa data wysyłki:
        Towar dostępny w magazynie: 1 dzień roboczy
        Niektóre pozycje mogą zostać wysłane tego samego dnia
        Konfiguruj
      • Flag hinges / conical countersunk heads / stainless steel / bright / B-1519 / TAKIGEN
        • Volume Discount

        TAKIGEN

        Flag hinges / conical countersunk heads / stainless steel / bright / B-1519 / TAKIGEN

        Made from stainless steel for superior corrosion resistance. fluoropolymer coating is applied to the shaft part for smooth movement.
        Czytaj dalej
        TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
        Detachable HingesFlag Type77 ~ 152-Stainless SteelBrushed70 ~ 110-For Right Side / For Left Side / For Both Right and Left Sides
        Cena (bez VAT) od:
        5.92 €
        Standardowa data wysyłki:
        Towar dostępny w magazynie: 1 dzień roboczy
        Niektóre pozycje mogą zostać wysłane tego samego dnia
        Konfiguruj
      • Flat plug-in hinges / non-perforated / weldable / rolled / steel / chromated (III-valent) / MISUMI
        • Volume Discount

        MISUMI

        Flat plug-in hinges / non-perforated / weldable / rolled / steel / chromated (III-valent) / MISUMI

        [Features] A special hinge for welding installation without holes. [Material] Main body EN 1.0330 Equiv.
        Czytaj dalej
        TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
        Detachable HingesStandard50 ~ 75-SteelTrivalent Chromate32 ~ 38Not ProvidedFor Right Side / For Left Side
        Cena (bez VAT) od:
        1.68 €
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • Flag Hinge for Heavy Loads

          MISUMI

          Flag Hinge for Heavy Loads

          [Features]·A flat hinge that can also be used for heavy doors. [Body Material]EN 1.4301 Equiv.
          Czytaj dalej
          TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
          Flag Hinge-154 ~ 204StandardStainless Steel-116 ~ 160Not ProvidedFor Right Side / For Left Side
          Cena (bez VAT) od:
          110.70 €
          Standardowa data wysyłki:
          5 dni robocze
          Konfiguruj
        • Detachable Hinges Torque Hinges
          • Volume Discount

          MISUMI

          Detachable Hinges Torque Hinges

          ·A hinge with constant torque holds the door in any position.·Operability and safety can be improved.·It can also be used with the axis vertically to the ground.·If you remove the holder, you can remove the door with the hinge attached.·Made of stainless steel, excels in corrosion resistance.
          Czytaj dalej
          TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
          Detachable Hinges-50 ~ 75StandardStainless Steel-35 ~ 50With Torque FunctionFor Right Side / For Left Side
          Cena (bez VAT) od:
          24.44 €
          Standardowa data wysyłki:
          5 dni robocze
          Konfiguruj
        • Corner hinges, plug-in / conical countersinks / zinc / mirror polished / FB-715 / TAKIGEN
          • ZNIŻKA
          • Volume Discount

          TAKIGEN

          Corner hinges, plug-in / conical countersinks / zinc / mirror polished / FB-715 / TAKIGEN

          [Features]· Easy to use, solid feel general purpose type.· Durable and tough structure.· Operation is very smooth by inserting nylon washer.· Left and right combination
          Czytaj dalej
          TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
          Detachable Hinges-200-Zinc AlloyChrome Plating30--
          Cena (bez VAT) od:
          48.74 €
          Cena specjalna
          Standardowa data wysyłki:
          Towar dostępny w magazynie: 1 dzień roboczy
          Możliwa wysyłka tego samego dnia
          Konfiguruj
        • Flag hinges / non-perforated / weldable / rolled / steel / 2000W / TRUSCO NAKAYAMA

            TRUSCO NAKAYAMA

            Flag hinges / non-perforated / weldable / rolled / steel / 2000W / TRUSCO NAKAYAMA【2 do 4 szt.】

            Extra thick welded steel hinge (EN 1.0320 Equiv. (hot rolled)). [Main body surface treatment]Base material finish
            Czytaj dalej
            TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
            Detachable HingesFlag Type75 ~ 149StandardSteelNot Provided104 ~ 108Not ProvidedFor Right Side / For Left Side
            Cena (bez VAT) od:
            22.02 €
            Standardowa data wysyłki:
            6 dni robocze
            Konfiguruj
          • Flag hinges / unpunched / weldable / rolled / stainless steel / brushed / ST2000W / TRUSCO NAKAYAMA
            • Volume Discount

            TRUSCO NAKAYAMA

            Flag hinges / unpunched / weldable / rolled / stainless steel / brushed / ST2000W / TRUSCO NAKAYAMA【1 do 2 szt.】

            [Features] Stainless steel (EN 1.4301 Equiv. (sintered)) extra thick welded flag hinge.
            Czytaj dalej
            TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
            Detachable HingesFlag Type78 ~ 148StandardStainless SteelBrushed100 ~ 112Not ProvidedFor Right Side / For Left Side
            Cena (bez VAT) od:
            24.93 €
            Standardowa data wysyłki:
            6 dni robocze
            Konfiguruj
          • Corner hinges, plug-in / weldable / brass intermediate rings / stainless steel / GN 128.2 / GANTER
            • ZNIŻKA
            • Volume Discount

            GANTER

            Corner hinges, plug-in / weldable / brass intermediate rings / stainless steel / GN 128.2 / GANTER

            Hinges GN 128.2 are produced from drawn weldable profiled Stainless Steel extrusions.The pin is fixed in the lower half.
            Czytaj dalej
            TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
            ----Stainless Steel-60 ~ 180--
            Cena (bez VAT) od:
            16.92 €
            Cena specjalna
            Standardowa data wysyłki:
            Towar dostępny w magazynie: 1 dzień roboczy
            Niektóre pozycje mogą zostać wysłane tego samego dnia
            Konfiguruj
          • Hinges Plastic, lift-off, left (K0434)

              KIPP

              Hinges Plastic, lift-off, left (K0434)

              · Connect two fixed components flexibly to each other· Axis, stainless steel· Application sectors: machine construction, furniture construction, doors, hatches, hoods· Can be screwed onto all panel elements· On request: with guide tabs for slots on aluminium profiles
              Czytaj dalej
              TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
              ------48--
              Cena (bez VAT) od:
              4.31 €
              Standardowa data wysyłki:
              4 dni robocze
              Konfiguruj
            • Hinges weldable Stainless Steel (K0985)

                KIPP

                Hinges weldable Stainless Steel (K0985)

                · Connect two fixed components flexibly to each other· Application sectors: machine construction, furniture construction, doors, hatches, hoods· Stainless steel 1.4301· Version: bright
                Czytaj dalej
                TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
                ------60 ~ 180--
                Cena (bez VAT) od:
                13.78 €
                Standardowa data wysyłki:
                4 dni robocze
                Konfiguruj
              • Hinges Stainless Steel adjustable (K1900)

                  KIPP

                  Hinges Stainless Steel adjustable (K1900)

                  · Connects two fixed components flexibly to each other · Application sectors: machine construction, furniture construction, doors, hatches, hoods· Adjustable
                  Czytaj dalej
                  TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
                  ------60--
                  Cena (bez VAT) od:
                  44.85 €
                  Standardowa data wysyłki:
                  4 dni robocze
                  Konfiguruj
                • Detachable Clean Hinges with Plastic Cap (Mounting Pitch Revised Type)
                  • Volume Discount

                  MISUMI

                  Detachable Clean Hinges with Plastic Cap (Mounting Pitch Revised Type)

                  ·This hinge has a resin cap attached to the sliding part to reduce dust generation during operation.· Lightweight because it is made of aluminum.·It is easy to maintain as it is detachable.·You can choose between round holes and slotted holes.·When installing the round hole type to the 8 series extrusion, the pitch is the same as the extrusion width, so it can be installed without any gaps.·The Slotted Holes Type can be installed on either 6 Series or 8 Series.·A plastic cap protects the hinge from light contact.
                  Czytaj dalej
                  TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
                  Detachable Hinges-65Standard / CleanroomAluminum--Not ProvidedFor Right Side / For Left Side
                  Cena (bez VAT) od:
                  29.07 €
                  Standardowa data wysyłki:
                  5 dni robocze
                  Konfiguruj
                • Flat plug-in hinges / conical countersinks / rolled / stainless steel / mirror polished / B-1005 / TAKIGEN
                  • ZNIŻKA
                  • Volume Discount

                  TAKIGEN

                  Flat plug-in hinges / conical countersinks / rolled / stainless steel / mirror polished / B-1005 / TAKIGEN

                  Made from stainless steel for superior corrosion resistance. Right side type and left side type available.
                  Czytaj dalej
                  TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
                  Detachable HingesStandard31 ~ 40-Stainless SteelMirror Surface28 ~ 38-For Right Side / For Left Side
                  Cena (bez VAT) od:
                  3.19 €
                  Cena specjalna
                  Standardowa data wysyłki:
                  Towar dostępny w magazynie: 1 dzień roboczy
                  Niektóre pozycje mogą zostać wysłane tego samego dnia
                  Konfiguruj
                • Flat plug-in hinges / conical countersinks / rolled / stainless steel / mirror polished / B-1268 / TAKIGEN
                  • Volume Discount

                  TAKIGEN

                  Flat plug-in hinges / conical countersinks / rolled / stainless steel / mirror polished / B-1268 / TAKIGEN

                  [Product Information]· <Common items>· Main body type: Detachable hinge· Detachable, flag hinge type: Standard type· Length L (mm): 60· Material: Stainless steel plate (SUS304)· Surface finish: Mirror surface buffing· Width W (mm): 44· Plate thickness t (mm): 1.5
                  Czytaj dalej
                  TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
                  Detachable HingesStandard60-Stainless SteelMirror Surface44-For Right Side / For Left Side
                  Cena (bez VAT) od:
                  42.59 €
                  Standardowa data wysyłki:
                  6 dni robocze
                  Konfiguruj
                • Corner hinges, plug-in / conical countersinks / zinc / chrome-plated / B-66 / TAKIGEN
                  • ZNIŻKA
                  • Volume Discount
                  • Stock

                  TAKIGEN

                  Corner hinges, plug-in / conical countersinks / zinc / chrome-plated / B-66 / TAKIGEN

                  For both left hand and right hand use.
                  Czytaj dalej
                  TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
                  Detachable HingesSimplified Detachable Type35 ~ 80-Zinc AlloyChrome Plating8 ~ 14.5-For Both Right and Left Sides
                  Cena (bez VAT) od:
                  5.63 €
                  Cena specjalna
                  Standardowa data wysyłki:
                  Towar dostępny w magazynie: 1 dzień roboczy
                  Niektóre pozycje mogą zostać wysłane tego samego dnia
                  Konfiguruj
                • Corner hinges, plug-in / weldable / brass spacers / aluminium / GN 128.2 / GANTER
                  • Volume Discount

                  GANTER

                  Corner hinges, plug-in / weldable / brass spacers / aluminium / GN 128.2 / GANTER

                  Hinges GN 128.2 are produced from drawn weldable profiled Aluminuim extrusions.The pin is fixed in the lower half.
                  Czytaj dalej
                  TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
                  ----Aluminum-60 ~ 180--
                  Cena (bez VAT) od:
                  5.68 €
                  Standardowa data wysyłki:
                  7 dni robocze
                  Konfiguruj
                • Hinges, adjustable, Zinc die casting
                  • Volume Discount

                  GANTER

                  Hinges, adjustable, Zinc die casting

                  TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
                  ---------
                  Cena (bez VAT) od:
                  18.10 €
                  Standardowa data wysyłki:
                  7 dni robocze
                  Konfiguruj
                • Corner hinges, plug-in / conical countersinks / zinc / mirror polished / FB-716 / TAKIGEN

                    TAKIGEN

                    Corner hinges, plug-in / conical countersinks / zinc / mirror polished / FB-716 / TAKIGEN

                    [Features]· General-purpose type with ease of use and sophistication.· Durable and tough structure.· Operation is very smooth by inserting nylon washer.· Left and right dual use type.[Applications]·For doors of large enclosures such as freezer/refrigerators and general housings.
                    Czytaj dalej
                    TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
                    Detachable Hinges-150-Zinc AlloyChrome Plating25--
                    Cena (bez VAT) od:
                    44.06 €
                    Standardowa data wysyłki:
                    5 dni robocze
                    Konfiguruj
                  • Corner hinges, plug-in / conical countersinks / zinc / chrome-plated / FB-718 / TAKIGEN
                    • Volume Discount

                    TAKIGEN

                    Corner hinges, plug-in / conical countersinks / zinc / chrome-plated / FB-718 / TAKIGEN

                    General-purpose type that is easy to use and has depth. Sturdy and durable construction.Comes with a nylon washer that makes operation very smooth. For both left hand and right hand use.
                    Czytaj dalej
                    TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
                    Detachable Hinges-100-Zinc AlloyChrome Plating25--
                    Cena (bez VAT) od:
                    24.60 €
                    Standardowa data wysyłki:
                    Towar dostępny w magazynie: 1 dzień roboczy
                    Możliwa wysyłka tego samego dnia
                    Konfiguruj
                  • Flat plug-in hinges / asymmetrical / rolled / stainless steel / barrel polished / B-1053-2 / TAKIGEN

                      TAKIGEN

                      Flat plug-in hinges / asymmetrical / rolled / stainless steel / barrel polished / B-1053-2 / TAKIGEN

                      [Features]· Can remove the door horizontally by sliding the shaft, and more effectively use the space.· Can be installed on either the right or left end of the door, making it possible to choose for the door to open to the right or left
                      Czytaj dalej
                      TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
                      Detachable HingesTension Type30-Stainless SteelTumble Polish40-For Both Right and Left Sides
                      Cena (bez VAT) od:
                      9.59 €
                      Standardowa data wysyłki:
                      6 dni robocze
                      Konfiguruj
                    • Corner hinges, plug-in / conical countersinks / stainless steel / barrel polished / B-1066 / TAKIGEN

                        TAKIGEN

                        Corner hinges, plug-in / conical countersinks / stainless steel / barrel polished / B-1066 / TAKIGEN

                        For both left hand and right hand use.
                        Czytaj dalej
                        TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
                        Detachable HingesSimplified Detachable Type35 ~ 80--Tumble Polish8 ~ 14.5-For Both Right and Left Sides
                        Cena (bez VAT) od:
                        32.32 €
                        Standardowa data wysyłki:
                        6 dni robocze
                        Konfiguruj
                      • Flat plug-in hinges / non-perforated / rolled / stainless steel / fine ground / B-1365 / TAKIGEN

                          TAKIGEN

                          Flat plug-in hinges / non-perforated / rolled / stainless steel / fine ground / B-1365 / TAKIGEN

                          [Features]· Made of stainless steel and has excellent corrosion resistance.·Right type / left type.[Applications]·For large tide-prevention doors, harbor facilities, large ships, and petroleum complexes.
                          Czytaj dalej
                          TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
                          Detachable HingesStandard150 ~ 200-Stainless SteelBrushed120 ~ 160-For Right Side / For Left Side
                          Cena (bez VAT) od:
                          108.14 €
                          Standardowa data wysyłki:
                          6 dni robocze
                          Konfiguruj
                        • Flat plug-in hinges / tapered / aluminium / aventurine silver / B-67 / TAKIGEN
                          • ZNIŻKA
                          • Volume Discount
                          • Stock

                          TAKIGEN

                          Flat plug-in hinges / tapered / aluminium / aventurine silver / B-67 / TAKIGEN

                          Aluminum alloy, and lightweight. Stainless steel shaft is used. Right side type and left side type available.
                          Czytaj dalej
                          TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
                          Detachable HingesStandard50 ~ 100-AluminumCoating40 ~ 82-For Right Side / For Left Side
                          Cena (bez VAT) od:
                          8.51 €
                          Cena specjalna
                          Standardowa data wysyłki:
                          Towar dostępny w magazynie: 1 dzień roboczy
                          Niektóre pozycje mogą zostać wysłane tego samego dnia
                          Konfiguruj
                        • Flat plug-in hinges / conical countersinks / rolled / stainless steel / polished / TKN / TRUSCO NAKAYAMA
                          • Volume Discount

                          TRUSCO NAKAYAMA

                          Flat plug-in hinges / conical countersinks / rolled / stainless steel / polished / TKN / TRUSCO NAKAYAMA

                          [Features]· Detachable hinge made of stainless steel, with excellent in corrosion resistance[Uses]· For measurement equipment, communication equipment, machine tools, small doors
                          Czytaj dalej
                          TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
                          Detachable HingesStandard40StandardStainless SteelBuffed Surface30Not ProvidedFor Right Side / For Left Side
                          Cena (bez VAT) od:
                          13.57 €
                          Standardowa data wysyłki:
                          6 dni robocze
                          Konfiguruj
                        • Flat plug-in hinges / unpunched / weldable, decorative pin / rolled / steel / 225xxxx / TRUSCO NAKAYAMA

                            TRUSCO NAKAYAMA

                            Flat plug-in hinges / unpunched / weldable, decorative pin / rolled / steel / 225xxxx / TRUSCO NAKAYAMA【2 szt.】

                            [Features] Used for tool box, key box, etc. [Material] Main body steel (EN 1.0330 Equiv.)
                            Czytaj dalej
                            TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
                            Detachable HingesStandard50.5 ~ 70StandardSteelNot Provided31 ~ 43Not ProvidedFor Right Side / For Left Side
                            Cena (bez VAT) od:
                            7.00 €
                            Standardowa data wysyłki:
                            6 dni robocze
                            Konfiguruj
                          • Spring hinges steel or stainless steel 180 mm, spring open (K1176)

                              KIPP

                              Spring hinges steel or stainless steel 180 mm, spring open (K1176)

                              · Connect two fixed components flexibly to each other· Application sectors: machine construction, furniture construction, doors, hatches, hoods· Material: steel or 1.4301 stainless steel· Self-opening· Form A: without holes
                              Czytaj dalej
                              TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
                              ----Stainless Steel / Steel-180--
                              Cena (bez VAT) od:
                              25.12 €
                              Standardowa data wysyłki:
                              4 dni robocze
                              Konfiguruj
                            • Hinges Plastic, lift-off, right (K0434)

                                KIPP

                                Hinges Plastic, lift-off, right (K0434)

                                · Connect two fixed components flexibly to each other· Axis, stainless steel· Application sectors: machine construction, furniture construction, doors, hatches, hoods· Can be screwed onto all panel elements· On request: with guide tabs for slots on aluminium profiles
                                Czytaj dalej
                                TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
                                ------48--
                                Cena (bez VAT) od:
                                4.32 €
                                Standardowa data wysyłki:
                                4 dni robocze
                                Konfiguruj
                              • Hinges Plastic, separable, dismountable, Form B, with pin/head and key ring (K1963)

                                  KIPP

                                  Hinges Plastic, separable, dismountable, Form B, with pin/head and key ring (K1963)

                                  · Hinges separable· Hinges dismountable· Tool-free
                                  Czytaj dalej
                                  TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
                                  ------48--
                                  Cena (bez VAT) od:
                                  5.73 €
                                  Standardowa data wysyłki:
                                  4 dni robocze
                                  Konfiguruj
                                • Stainless Steel Lift-Off Hinge HNS□L/HNS□R
                                  • Volume Discount
                                  • Order quantities extended (D-JIT)

                                  MISUMI

                                  Stainless Steel Lift-Off Hinge HNS□L/HNS□R

                                  [Features] A general-purpose, low-cost lift-off hinge made of stainless steel.
                                  Czytaj dalej
                                  TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
                                  Detachable HingesStandard40 ~ 75-Stainless SteelNot Provided30 ~ 38Not ProvidedFor Right Side / For Left Side
                                  Cena (bez VAT) od:
                                  2.79 €
                                  Standardowa data wysyłki:
                                  Towar dostępny w magazynie: 1 dzień roboczy
                                  Niektóre pozycje mogą zostać wysłane tego samego dnia
                                  Konfiguruj
                                • Pipe plug-in hinges / non-perforated / asymmetrical / rolled / steel / blank / B-528-A / TAKIGEN
                                  • ZNIŻKA
                                  • Volume Discount

                                  TAKIGEN

                                  Pipe plug-in hinges / non-perforated / asymmetrical / rolled / steel / blank / B-528-A / TAKIGEN

                                  Same size also available in stainless steel. See B-1528-A[Features]· Can be folded and used depending on the structure and application of the board.
                                  Czytaj dalej
                                  TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
                                  Detachable HingesTension Type60 ~ 104--Not Provided60 ~ 100-For Both Right and Left Sides
                                  Cena (bez VAT) od:
                                  3.37 €
                                  Cena specjalna
                                  Standardowa data wysyłki:
                                  Towar dostępny w magazynie: 1 dzień roboczy
                                  Niektóre pozycje mogą zostać wysłane tego samego dnia
                                  Konfiguruj
                                • Pipe plug-in hinges / non-perforated / asymmetrical / rolled / steel / blank / B-527-A / TAKIGEN
                                  • ZNIŻKA
                                  • Volume Discount

                                  TAKIGEN

                                  Pipe plug-in hinges / non-perforated / asymmetrical / rolled / steel / blank / B-527-A / TAKIGEN

                                  Same size also available in stainless steel. See B-1527-A[Features]· Can be folded and used depending on the structure and application of the board.
                                  Czytaj dalej
                                  TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
                                  Detachable HingesTension Type60 ~ 104--Not Provided60 ~ 100-For Both Right and Left Sides
                                  Cena (bez VAT) od:
                                  3.16 €
                                  Cena specjalna
                                  Standardowa data wysyłki:
                                  Towar dostępny w magazynie: 1 dzień roboczy
                                  Niektóre pozycje mogą zostać wysłane tego samego dnia
                                  Konfiguruj
                                • Pipe plug-in hinges / non-perforated / asymmetrical / rolled / steel / blank / B-543-A / TAKIGEN

                                    TAKIGEN

                                    Pipe plug-in hinges / non-perforated / asymmetrical / rolled / steel / blank / B-543-A / TAKIGEN

                                    [It can be bent and used depending on the structure and application of the board.
                                    Czytaj dalej
                                    TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
                                    Detachable HingesTension Type80 ~ 104--Not Provided60 ~ 110-For Both Right and Left Sides
                                    Cena (bez VAT) od:
                                    4.68 €
                                    Standardowa data wysyłki:
                                    6 dni robocze
                                    Konfiguruj
                                  • Pipe plug-in hinges / non-perforated / asymmetrical / rolled / steel / blank / B-527-B / TAKIGEN
                                    • ZNIŻKA
                                    • Volume Discount

                                    TAKIGEN

                                    Pipe plug-in hinges / non-perforated / asymmetrical / rolled / steel / blank / B-527-B / TAKIGEN

                                    Same size also available in stainless steel. See B-1527-B[Features]· Can be folded and used depending on the structure and application of the board.
                                    Czytaj dalej
                                    TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
                                    Detachable HingesTension Type60 ~ 92--Not Provided60 ~ 100-For Both Right and Left Sides
                                    Cena (bez VAT) od:
                                    3.94 €
                                    Cena specjalna
                                    Standardowa data wysyłki:
                                    Towar dostępny w magazynie: 1 dzień roboczy
                                    Niektóre pozycje mogą zostać wysłane tego samego dnia
                                    Konfiguruj
                                  • Pipe plug-in hinges / non-perforated / asymmetrical / rolled / steel / blank / B-528-B / TAKIGEN
                                    • ZNIŻKA

                                    TAKIGEN

                                    Pipe plug-in hinges / non-perforated / asymmetrical / rolled / steel / blank / B-528-B / TAKIGEN

                                    Same size also available in stainless steel. See B-1528-B[Features]· Can be folded and used depending on the structure and application of the board.
                                    Czytaj dalej
                                    TypeDetachable Flag Hinges TypeLength L *Figure in () is the min length of the adjustable type.(mm)Operating EnvironmentMain Body MaterialMain Body Surface TreatmentWidth W(mm)Additional FunctionLeft/Right Side
                                    Detachable HingesTension Type80 ~ 92--Not Provided80 ~ 100-For Both Right and Left Sides
                                    Cena (bez VAT) od:
                                    4.44 €
                                    Cena specjalna
                                    Standardowa data wysyłki:
                                    Towar dostępny w magazynie: 1 dzień roboczy
                                    Możliwa wysyłka tego samego dnia
                                    Konfiguruj