Keyless Bushing (Fastening Fittings)（Allowable Torque Range：2.0 to 20.0）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
- Promotional pricing
Keyless Bushings / Standard
MISUMI
- Volume Discount
- Order quantities extended (D-JIT)
- Stock
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 35.76 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Keyless Bushings / Compact
MISUMI
[Features] It has a centring function and is suitable for a smaller hub.- Volume Discount
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 31.74 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Mecha Lock MA, Standard Type
ISEL
[Features]
· 34 models that have shaft diameters standardized from ø5 to ø85.
· Centering function suppresses outer circumference and terminal surface run-out.
· Loose design of slope angle degrees produces a self-locking effect.
· Hub internal diameter can be used with pass-through machining.
· Wide range of hub options with thin walls and low surface pressure- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 38.74 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
POSI LOCK D
MIKI PULLEY
Shaft and mounting parts have a large allowable dimensions tolerance, and can be easily aligned and positioned. Medium load and lightweight type.
[Features]
· Tighten the clamping bolt to move the outer ring in the shaft direction.
· At this time, the wedge action on the tapered face with the inner ring creates a force that pushes the shaft and the hub inner face, which forces the shaft and the hub to be fully engaged.
· The PSL-D is designed for medium loading, with a small surface pressure and reduced installation diameter and weight.
· Short in shaft direction, does not take up more space than necessary.
· PSL-D-C is a simple rust proofing specification that involves applying electroless nickel plating to the main body.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 73.77 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Keyless Bushings / Thin
MISUMI
- Volume Discount
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 28.46 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
KanaLock (Cost-Effective Product) Model KPL300
KATAYAMA CHAIN
[Features]
· For model KPL300, mounting space has been extremely reduced in a radial direction, embedding of up to 4 KanaLocks can be selected.
· This facilitates great torque transmission.
· Boss hole and shaft hole fitting is up to H8/h8- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 7.35 € Special price Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Mechanical Lock MR Thin Type
ISEL
Using thin-type keyless bushing (fastening fitting), the outer diameter can be reduced.
[Features]
· Ideal for when a thin-wall hub design is desired.
· The outer diameter of the hub can be reduced by making the wall thinner.
· Can be used for overall short length hubs.
· Installation time is reduced by reducing the number of bolts.
· With short surface pressure section, the product is ideal for reducing the width of the hub.
[Applications]
· Ideal for mounting on power transmission devices (pulleys, etc.) that especially have a folding mechanism, such as machine tools and transfer devices.
· Can be used for overall short length hubs.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 47.61 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing
Mega Lock, MC, Standard Type (Aluminum Specifications)
ISEL
· 22 models from φ4 to φ35 shaft diameter available as standard
· Supports aluminum timing pulleys (steel is also usable)
· Reduced number of bolts shortens attachment/detachment time
· With a spigot joint on the back, it can also be used as a bearing retainer
· With low surface pressure, it is also ideal for hollow shafts- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 31.33 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Keyless Bushing A.P.LOCK SAPL-A Series
SUNGIL
[Features]
· Self-centering function: Prevents minute Off-centering.
· Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface.
· Internal diameters 4.5ø to 40ø standardized.
· Has simple structure for easy assembly.
· Choose from stainless steel (vacuum environments) or electroless nickel plated products (corrosion proof) to suit the use environment- 2D CAD data available
Configure nowStarting from∗ ： 19.79 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Keyless Bushing A.P.LOCK SAPL-AS Series
SUNGIL
[Features]
· Self-centering function: Prevents minute Off-centering.
· Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface.
· Internal diameters 4.5ø to 40ø standardized.
· Has simple structure for easy assembly.
· Choose from stainless steel (vacuum environments) or electroless nickel plated products (corrosion proof) to suit the use environment- 2D CAD data available
Configure nowStarting from∗ ： 67.20 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Keyless Bushing A.P.LOCK SAPA Series
SUNGIL
[Features]
· Made from aluminum.
Moment of inertia reduction is an important factor in controlling system performance when setting high-speed servo control positions. High-speed use at low inertia has been made possible by using an aluminum pulley that is suitable for an A.P.Lock.
· High torque transmission power
Uses high rigidity aluminum alloy to transmit torque, so it can be used not only with aluminum pulleys but also general steel pulleys.
· Optimal for clean rooms
Electroless nickel plating bolts are used standard for the aluminum main body materials, making it optimal for clean rooms.Configure nowStarting from∗ ： 20.88 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
- Promotional pricing
Keyless Bushing, Centering Type SES
Save & Secure
Centering type of keyless bushing. Abundant variations to choose from, with allowable torque from 6.2 to 13000N·m. The SS company manufactures a 20% share of the couplings in Taiwan. The company's are centered on China and Southeast Asia, and is trying to expand both its domestic and foreign shares.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 23.63 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Keyless Bushing A.P.LOCK SAPL-AK Series
SUNGIL
[Features]
· Self-centering function: Prevents minute Off-centering.
· Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface.
· Internal diameters 4.5ø to 40ø standardized.
· Has simple structure for easy assembly.
· Choose from stainless steel (vacuum environments) or electroless nickel plated products (corrosion proof) to suit the use environment- 2D CAD data available
Configure nowStarting from∗ ： 24.96 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing
Keyless Bushing A.P.LOCK SAPL-B Series
SUNGIL
[Features]
· Self-centering function: Prevents minute Off-centering.
· SAPL-A Depending on the type, the cover outer diameter and bolt size are both large, providing comparatively high durability relative to the corresponding internal diameter.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 30.59 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Keyless Bushing A.P.LOCK SAPC Series
SUNGIL
[Features]
· Made from aluminum.
Moment of inertia reduction is an important factor in controlling system performance when setting high-speed servo control positions. High-speed use at low inertia has been made possible by using an aluminum pulley that is suitable for an A.P.Lock.
· Optimal for aluminum pulleys.
When running a servo motor with a timing pulley, conventional friction connection units apply high pressure to the surfaces, which prevents the hub diameter from sitting properly and causes problems with slippage. The SAPC series uses servo motor torque specifications as the basis for reducing the bolt count and lowering pressure on surfaces, making it possible to connect to aluminum pulleys without difficulty.
· Staged machining structure.
Designed so that the push plate of the bearing could carry out its role, eliminating the need for the use of a separate bearing push plate.
· Easy assembly and position setting.
For conventional power locks, a space of 1 mm from there counterpart items is required to facilitate disassembly, but the SAPC series has a structure that is easy to disassemble even if there is no room for the hub to move during disassembly. Also, position setting is easy.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 22.71 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
KanaLock, Model KL201MA, Standard Type
KATAYAMA CHAIN
Assembling it suppresses hub terminal surface and outer circumference vibration, constraints gear interval backlash, and also reduces belt vibration noise caused by timing pulley vibration.
[Features]
· Assembling KL201MA suppresses hub terminal surface and outer circumference vibration, constraints gear interval backlash, and also reduces belt drive noise caused by timing pulley vibration.
· Compatible shaft diameters are ø5 to ø85, and compatible shaft tolerances are g5, g6, h5, h6, h7, and h8- Volume Discount
Configure nowStarting from∗ ： 53.37 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Keyless Bushing A.P.LOCK SAPL-C Series
SUNGIL
[Features]
· Self-centering function: Prevents minute Off-centering.
· Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface. (Most compact design A.P. Lock)
· Suitable for short hubs.
· Internal ring mounts to the terminal face, preventing the hub from moving when connected.
· Choose from stainless steel or electroless nickel plated products to suit the use environment.- 2D CAD data available
Configure nowStarting from∗ ： 29.24 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
- Promotional pricing
Keyless Bushing A.P.LOCK SAPL-CK Series
SUNGIL
[Features]
· Self-centering function: Prevents minute Off-centering.
· Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface. (Most compact design A.P. Lock)
· Suitable for short hubs.
· Internal ring mounts to the terminal face, preventing the hub from moving when connected.
· Choose from stainless steel or electroless nickel plated products to suit the use environment.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 35.43 € Special price Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Keyless Bushing A.P.LOCK SAPL-CS Series
SUNGIL
[Features]
· Self-centering function: Prevents minute Off-centering.
· Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface. (Most compact design A.P. Lock)
· Suitable for short hubs.
· Internal ring mounts to the terminal face, preventing the hub from moving when connected.
· Choose from stainless steel or electroless nickel plated products to suit the use environment.- 2D CAD data available
Configure nowStarting from∗ ： 74.76 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Type |
| Centering |
| Body Material |
| Shaft Bore Dia. d(Ø) |
| Allowable Torque Range(N•m) |
| Surface Treatment |
| Hub Dia. D1(Ø) |
| Tightening Structure |
| Tightening Method |
| Allowable Torque(N•m) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | ISEL | MIKI PULLEY | MISUMI | KATAYAMA CHAIN | ISEL | ISEL | SUNGIL | SUNGIL | SUNGIL | Save & Secure | SUNGIL | SUNGIL | SUNGIL | KATAYAMA CHAIN | SUNGIL | SUNGIL | SUNGIL |
| Product Series | |||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| Starting from∗ | 35.76 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 31.74 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 38.74 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 73.77 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 28.46 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 7.35 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 47.61 € *Unit price with basic configuration | 31.33 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 19.79 € *Unit price with basic configuration | 67.20 € *Unit price with basic configuration | 20.88 € *Unit price with basic configuration | 23.63 € Special price *Unit price with basic configuration Promotional pricing | 24.96 € *Unit price with basic configuration | 30.59 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 22.71 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 53.37 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 29.24 € *Unit price with basic configuration | 35.43 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 74.76 € *Unit price with basic configuration |
| Min. Shipping Days | Same day | Same day | Same day | Same day | Same day | 6 Days | 5 Days | Same day | 10 Days | 10 Days | 10 Days | Same day | 5 Days | Same day | Same day | Same day | 10 Days | 10 Days | 5 Days |
| Specifications |
|
|
| ||||||||||||||||
| Type | Flanged | Thin Wall | Flanged | Straight | Direct Mounting | Sleeve | Thin Wall | Flanged | Flanged | Flanged | Flanged | Flanged | Flanged | Flanged | Flanged | Straight | Thin Wall | Thin Wall | Thin Wall |
| Centering | Provided | Provided | Provided | - | Not Provided | Not Provided | Provided | Provided | Provided | Provided | Not Provided | Provided | Provided | Provided | Not Provided | Provided | Provided | Provided | Provided |
| Body Material | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Steel | Steel | Steel | Steel | Aluminum | Steel | Stainless Steel | Aluminum | Steel | Steel | Steel | Aluminum | Steel | Steel | Steel | Stainless Steel |
| Shaft Bore Dia. d(Ø) | 5 ～ 11 | 5 ～ 14 | 5 ～ 6 | 6 ～ 12 | 5 ～ 10 | 10 ～ 14 | 6 | 4 ～ 14 | 5 ～ 6.35 | 5 ～ 11 | 5 ～ 10 | 8 | 5 ～ 10 | 8 | 5 ～ 14 | 6.35 | 5 ～ 6 | 5 ～ 6 | 5 ～ 14 |
| Allowable Torque Range(N•m) | 2.0 to 20.0 | 2.0 to 20.0 | 2.0 to 20.0 | 2.0 to 20.0 | 2.0 to 20.0 | 2.0 to 20.0 | 2.0 to 20.0 | 2.0 to 20.0 | 2.0 to 20.0 | 2.0 to 20.0 | 2.0 to 20.0 | 2.0 to 20.0 | 2.0 to 20.0 | 2.0 to 20.0 | 2.0 to 20.0 | 2.0 to 20.0 | 2.0 to 20.0 | 2.0 to 20.0 | 2.0 to 20.0 |
| Surface Treatment | Not Provided / Black Oxide / Electroless Nickel Plating | Not Provided / Electroless Nickel Plating | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Clear Anodize | Not Provided | Not Provided | Clear Anodize | Not Provided | Electroless Nickel Plating | Not Provided | Clear Anodize | Not Provided | Not Provided | Electroless Nickel Plating | Not Provided |
| Hub Dia. D1(Ø) | 16 ～ 24 | 12 ～ 22 | 16 ～ 19 | 16 ～ 22 | 8 ～ 13 | - | 12 | 15 ～ 26 | 16 ～ 20 | 16 ～ 24 | 16 ～ 23 | 22 | 16 ～ 23 | 22 | 16 ～ 26 | 20 | 12 | 12 | 12 ～ 22 |
| Tightening Structure | Single Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | Tapered Sleeve Type | Tapered Sleeve Type | Single Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | Single Cone Type |
| Tightening Method | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) |
| Allowable Torque(N•m) | 2.8 ～ 22 | 3 ～ 20 | 7 ～ 14 | 6 ～ 19 | 4.2 ～ 18 | 6.9 ～ 20 | 11 | 2 ～ 18 | 7 ～ 14 | 2.8 ～ 14.7 | 6 ～ 20 | 18 | 4.6 ～ 19.6 | 18 | 2.5 ～ 18 | 12.7 | 9 ～ 11 | 9 ～ 11 | 3 ～ 20 |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Type
-
Flanged -
Straight -
Nut Tightening -
Thin Wall -
Direct Mounting -
Sleeve
-
-
Centering
- Provided
- Not Provided
-
Body Material
- Steel
- Stainless Steel
- Aluminum
- Grey Iron
-
Shaft Bore Dia. d(Ø)
-
Allowable Torque Range(N•m)
-
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
- Clear Anodize
-
Hub Dia. D1(Ø)
-
Tightening Structure
-
Tightening Method
-
Allowable Torque(N•m)
Brand
-
- SUNGIL (9)
- ISEL (3)
- KATAYAMA CHAIN (2)
- MIKI PULLEY (1)
- Save & Secure (1)
- CAP (0)
- EVER-ON CORPORATION (0)
- RINGFEDER (0)
- NORELEM (0)
- HALDER (0)
- OPTIBELT (0)
- KBK (0)
- MAEDLER (0)
- CONCAR (0)
CAD data type
-
- 2D
- 3D
Examples how you can use these components
Categories related to Keyless Bushing (Fastening Fittings)
Metody płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.