Keyless Bushing (Fastening Fittings)

?* Information on days to ship and prices

• • Recommendation

  

  Tapered Clamping Bush 1008 with Inch Drill

  CONCAR

  Select to compare

  Configure now
  Starting from∗ ：	9.45 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• • Recommendation

  

  Tapered Clamping Bush 1008 with Metric Drill

  CONCAR

  Select to compare

  Configure now
  Starting from∗ ：	4.72 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Keyless Bushings / Standard

  MISUMI

  • Volume Discount

  • Order quantities extended (D-JIT)
  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	35.76 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Compact and self-centering locking device KBS61

  KBK

  · Large clamping range
  · High centering capability and good concentricity properties
  · Compact design
  · Available starting from 5mm shaft diameter
  · Torque range: 6 - 1900Nm

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.35 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Keyless Bushings / Compact

  MISUMI

  [Features] It has a centring function and is suitable for a smaller hub.

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	31.74 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Keyless Bushings / Easy Mounting (Nut)

  MISUMI

  [Features] It can be easily installed by simply tightening 1 nut.

  • Volume Discount

  • Order quantities extended (D-JIT)
  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	40.66 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Keyless Bushings / Thin

  MISUMI

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	28.46 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Self-centering locking device for small hubs KBS80

  KBK

  · For high concentricity and perpendicularity of the components
  · No axial displacement during assembly
  · Self-centering
  · Torque range: 12 – 17500Nm

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.08 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Keyless Bushings / Straight for High Torque

  MISUMI

  • Volume Discount

  • Order quantities extended (D-JIT)
  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	105.79 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Keyless Bushings / Straight

  MISUMI

  • Volume Discount

  • Order quantities extended (D-JIT)
  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	35.14 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Locking Assemblies BAR

  MAEDLER

  Material: Steel.
  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • For medium torques.
  • Very good distribution of pressure.
  • Very good self-centering.
  • Self-releasing at dismounting.
  • Also suitable for large hub and shaft tolerances.
  • Slight axial offset possible during assembly.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	24.10 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking Elements 8006

  RINGFEDER

  Ideally adaptable clamping element made of stainless steel for large transmission forces in a small space. Absolutely backlash-free, wear-free and maintenance-free. Also suitable for coarser tolerances.

  3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

• 

  Locking Device

  KBK

  [Specifications]
  ・Self-centering: Yes, No
  ・KBS Series

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.33 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Mecha Lock MA, Standard Type

  ISEL

  [Features]
  · 34 models that have shaft diameters standardized from ø5 to ø85.
  · Centering function suppresses outer circumference and terminal surface run-out.
  · Loose design of slope angle degrees produces a self-locking effect.
  · Hub internal diameter can be used with pass-through machining.
  · Wide range of hub options with thin walls and low surface pressure

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	38.74 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  POSI LOCK G

  MIKI PULLEY

  Shaft and mounting parts have a large allowable dimensions tolerance, and can be easily aligned and positioned. Can support heavy loads.
  
  [Features]
  · Tightening the clamping bolt moves the 2 taper rings in the shaft direction.
  · At this time, the wedging action between both the inner ring and the outer ring against the taper surface produces force that pushes against the shaft and hub internal surface. This force completely connects the axis and shaft.
  · The PSL-G has an even transmission ability due to its simple construction and strong components, and it can also cope with heavy loads.
  · Short in shaft direction, does not take up more space than necessary.
  · PSL-G-C (simple rust-proofing specification) is a simple rust proofing specification that involves applying electroless nickel plating to the main body.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	54.73 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Mecha-Lock MN Series, Nut Type

  ISEL

  Easy-to-tighten nut type key-less bushing (fastening fitting).
  [Features]
  · Tightening the nut shortens the tightening time.
  · Easiest assembly among mechanical lock series.
  · Centering can be done by simply tightening both the sides.
  · Also contributes to reduction of hub outer diameter.
  [Applications]
  · Ideal for mounting on power transmission devices (pulleys, etc.) that especially have a folding mechanism, such as machine tools and transfer devices.
  · Ideal for installations with thinner hub thickness and low torque.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	46.53 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Keyless Bushing A.P.LOCK SAPL-A Series

  SUNGIL

  [Features]
  · Self-centering function: Prevents minute Off-centering.
  · Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface.
  · Internal diameters 4.5ø to 40ø standardized.
  · Has simple structure for easy assembly.
  · Choose from stainless steel (vacuum environments) or electroless nickel plated products (corrosion proof) to suit the use environment

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	19.79 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Short locking device for higher tolerances KBS40

  KBK

  · Costs-effective
  · Very short
  · Large span
  · Non self-centering
  · Torque range: 255 - 68000Nm

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.77 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Tapered Clamping Bush 2517 with Metric Drill

  CONCAR

  Select to compare

  Configure now
  Starting from∗ ：	8.18 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Self-centering locking device KBS13

  KBK

  · For connections in the smallest places
  · Very short design
  · Self-centering
  · Torque range: 310 - 46980Nm

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.90 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Self-centering locking Device with flange KBS16

  KBK

  · For connections in the smallest places
  · Very short design
  · No axial displacement during assembly
  · Self-centering
  · Torque range: 260 - 36100Nm

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.90 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Mega Lock, MC, Standard Type (Aluminum Specifications)

  ISEL

  · 22 models from φ4 to φ35 shaft diameter available as standard
  · Supports aluminum timing pulleys (steel is also usable)
  · Reduced number of bolts shortens attachment/detachment time
  · With a spigot joint on the back, it can also be used as a bearing retainer
  · With low surface pressure, it is also ideal for hollow shafts

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	31.33 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Locking Elements Slitted 8006

  RINGFEDER

  Ideally adaptable clamping element made of stainless steel for large transmission forces in a small space. Absolutely backlash-free, wear-free and maintenance-free. Also suitable for coarser tolerances.

  3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

• 

  Taper Bushes 1008

  MAEDLER

  Material: GG25.
  Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
  Screws included in delivery. Thread BSW. Cone and front side ground.
  Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
  Other bush sizes and bores available at short notice.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.97 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Taper Bushes 1610

  MAEDLER

  Material: GG25.
  Bores ISO E8. Metric bores with feather keyways DIN 6885/1. Inch bores with feather keyways like British Standard (BS).
  Screws included in delivery. Thread BSW. Cone and front side ground.
  Shaft tolerance +0.05/-0.125 mm. Can be used with or without parallel key, depending on the required torque.
  Other bush sizes and bores available at short notice.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.91 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Tapered Clamping Bush 1610 with Metric Drill

  CONCAR

  Select to compare

  Configure now
  Starting from∗ ：	8.26 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Shrink Disc 4161

  RINGFEDER

  Two-piece shrink disk for high torque stress. Easy assembly by mounting stop. Good centering and concentricity properties.

  3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

• 

  Locking Assemblies TOK Version A

  MAEDLER

  Material Version A: Steel, bright.
  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • For medium torques.
  • Self-centering.
  • Axial offset during mounting (can be compensated by correct positioning).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.35 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Rigid Shaft Coupling

  KBK

  · Very cost-effective
  · For medium and low torques
  · No axial displacement during assembly
  · Self-centering
  · Torque range: 158 - 4300Nm

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.99 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Shrink Disc

  KBK

  · For hollow shaft connections
  · Applicable for high bending moments
  · Short overall length
  · Good concentricity properties
  · Self-centering and self-releasing
  · Torque range: 40 - 327000Nm

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.41 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Mecha Lock MA, Standard High-Torque Type

  ISEL

  Centering function suppresses outer circumference and terminal surface run-out. High torque specifications.
  
  [Features]
  · 21 models that have shaft diameters standardized from ø25 to ø150.
  · High torque transmission specifications.
  · With centering function.
  · Loose design of slope angle degrees produces a self-locking effect.
  · Hub internal diameter can be used with pass-through machining, wide range of options available during design

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	100.92 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Mecha-Lock MT, General Purpose Type

  ISEL

  No drag when connecting for easy removal

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	39.04 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  POSI LOCK D

  MIKI PULLEY

  Shaft and mounting parts have a large allowable dimensions tolerance, and can be easily aligned and positioned. Medium load and lightweight type.
  
  [Features]
  · Tighten the clamping bolt to move the outer ring in the shaft direction.
  · At this time, the wedge action on the tapered face with the inner ring creates a force that pushes the shaft and the hub inner face, which forces the shaft and the hub to be fully engaged.
  · The PSL-D is designed for medium loading, with a small surface pressure and reduced installation diameter and weight.
  · Short in shaft direction, does not take up more space than necessary.
  · PSL-D-C is a simple rust proofing specification that involves applying electroless nickel plating to the main body.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	73.77 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  KanaLock (Cost-Effective Product) Model KPL300

  KATAYAMA CHAIN

  [Features]
  · For model KPL300, mounting space has been extremely reduced in a radial direction, embedding of up to 4 KanaLocks can be selected.
  · This facilitates great torque transmission.
  · Boss hole and shaft hole fitting is up to H8/h8

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.27 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Keyless Bushing, Standard Type (with Centering Function)

  CAP

  Brand-name products provided by MISUMI-VONA are offered based on customers' needs that selected from products of Asian manufacturers carefully. Please select an item according to the user's various usage scenes. CAPT This company is developing domestic and foreign high-quality and inexpensive keyless bushing and sprockets. We are adopting not only more Chinese but also Japanese manufacturers.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.70 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Keyless Bushing A.P.LOCK SAPL-AK Series

  SUNGIL

  [Features]
  · Self-centering function: Prevents minute Off-centering.
  · Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface.
  · Internal diameters 4.5ø to 40ø standardized.
  · Has simple structure for easy assembly.
  · Choose from stainless steel (vacuum environments) or electroless nickel plated products (corrosion proof) to suit the use environment

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	24.96 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Locking Assemblies 7061

  RINGFEDER

  Self-centering clamping set with rough surface pressure, the compact design is ideal for toothed disks.

  3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

• 

  Locking Assemblies 7515

  RINGFEDER

  The self-centering precision Locking Assembly for transmission of torques, axial forces and special optimised for the transmission of bending moments, with special requirements to the true running of the clamped pieces.

  3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	5 Days

• 

  OPTIBELT Taper Bushing with Metric Bore

  OPTIBELT

  [Specifications]
  ・Shaft Bore Dia. d(Ø): 14-100
  ・Allowable Torque(N•m): 5.7-195
  ・Overall Length W(mm): 22.3-114.3
  ・Keyway: DIN 6885 Part 1, Shallow key
  ・Engineering material: 0.6020 (EN-GJL 200)

  Select to compare

  Configure now
  Starting from∗ ：	4.78 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Locking Assemblies SIG

  MAEDLER

  Material: Stainless steel 1.4301 (AISI 304).
  • For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
  • For lower torques.
  • Minimal space requirement.
  • Self-centering.
  • Axial movement during mounting.
  • The connection can be disassembled with a puller.
  Required tolerances: Shaft: h8.
  Bore of the part to be clamped: H8.
  Surface roughness R_z max. 12.5 μm.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	28.82 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Mechanical Lock MR Thin Type

  ISEL

  Using thin-type keyless bushing (fastening fitting), the outer diameter can be reduced.
  [Features]
  · Ideal for when a thin-wall hub design is desired.
  · The outer diameter of the hub can be reduced by making the wall thinner.
  · Can be used for overall short length hubs.
  · Installation time is reduced by reducing the number of bolts.
  · With short surface pressure section, the product is ideal for reducing the width of the hub.
  [Applications]
  · Ideal for mounting on power transmission devices (pulleys, etc.) that especially have a folding mechanism, such as machine tools and transfer devices.
  · Can be used for overall short length hubs.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	46.50 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Keyless Bushing, Straight Type

  CAP

  Brand-name products provided by MISUMI-VONA are offered based on customers' needs that selected from products of Asian manufacturers carefully. Please select an item according to the user's various usage scenes. CAPT This company is developing domestic and foreign high-quality and inexpensive keyless bushing and sprockets. We are adopting not only more Chinese but also Japanese manufacturers.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.80 €
  Min. Shipping Days ：	58 Days

  *Unit price with basic configuration

• 

  Keyless Bushing A.P.LOCK SAPL-C Series

  SUNGIL

  [Features]
  · Self-centering function: Prevents minute Off-centering.
  · Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface. (Most compact design A.P. Lock)
  · Suitable for short hubs.
  · Internal ring mounts to the terminal face, preventing the hub from moving when connected.
  · Choose from stainless steel or electroless nickel plated products to suit the use environment.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	29.24 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Tapered Clamping Bush 1108 with Metric Drill

  CONCAR

  Select to compare

  Configure now
  Starting from∗ ：	3.38 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Tapered Clamping Bush 1615 with Metric Drill

  CONCAR

  Select to compare

  Configure now
  Starting from∗ ：	9.08 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

Loading...