Keyless Bushing (Fastening Fittings)
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
- Promotional pricing
Keyless Bushings / Standard
MISUMI
- Volume Discount
- Order quantities extended (D-JIT)
- Stock
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 35.76 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Keyless Bushings / Compact
MISUMI
[Features] It has a centring function and is suitable for a smaller hub.- Volume Discount
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 31.74 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Mecha Lock MA, Standard Type
ISEL
[Features]
· 34 models that have shaft diameters standardized from ø5 to ø85.
· Centering function suppresses outer circumference and terminal surface run-out.
· Loose design of slope angle degrees produces a self-locking effect.
· Hub internal diameter can be used with pass-through machining.
· Wide range of hub options with thin walls and low surface pressure- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 38.74 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Locking Assemblies TOK Version A
MAEDLER
Material Version A: Steel, bright.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For medium torques.
• Self-centering.
• Axial offset during mounting (can be compensated by correct positioning).- Volume Discount
Configure nowStarting from∗ ： 12.35 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies SIG
MAEDLER
Material: Stainless steel 1.4301 (AISI 304).
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For lower torques.
• Minimal space requirement.
• Self-centering.
• Axial movement during mounting.
• The connection can be disassembled with a puller.
Required tolerances: Shaft: h8.
Bore of the part to be clamped: H8.
Surface roughness Rz max. 12.5 μm.- Volume Discount
Configure nowStarting from∗ ： 28.82 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
- Promotional pricing
Mecha-Lock MN Series, Nut Type
ISEL
Easy-to-tighten nut type key-less bushing (fastening fitting).
[Features]
· Tightening the nut shortens the tightening time.
· Easiest assembly among mechanical lock series.
· Centering can be done by simply tightening both the sides.
· Also contributes to reduction of hub outer diameter.
[Applications]
· Ideal for mounting on power transmission devices (pulleys, etc.) that especially have a folding mechanism, such as machine tools and transfer devices.
· Ideal for installations with thinner hub thickness and low torque.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 46.53 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Locking Assemblies COM-B
MAEDLER
Material: Steel.
• For fixing a hub (e.g. timing belt pulley or similar) on a shaft.
• For medium torques.
• Also suitable for small hub diameters.
• Self-centering.
• Self-locking.
• No axial movement during mounting.- Volume Discount
Configure nowStarting from∗ ： 18.43 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Mechanical Lock MR Thin Type
ISEL
Using thin-type keyless bushing (fastening fitting), the outer diameter can be reduced.
[Features]
· Ideal for when a thin-wall hub design is desired.
· The outer diameter of the hub can be reduced by making the wall thinner.
· Can be used for overall short length hubs.
· Installation time is reduced by reducing the number of bolts.
· With short surface pressure section, the product is ideal for reducing the width of the hub.
[Applications]
· Ideal for mounting on power transmission devices (pulleys, etc.) that especially have a folding mechanism, such as machine tools and transfer devices.
· Can be used for overall short length hubs.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 46.50 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Locking Assemblies COM-L, QPQ-Coated
MAEDLER
Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below).
• For very high torques.
• Self-centering.
• Slight axial offset possible during assembly.
Concentricity: 0.02 to 0.04 mm.
* When using in a stepped bore, the clearance C is to be foreseen for demounting.- Volume Discount
Configure nowStarting from∗ ： 33.68 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies TOK Version B
MAEDLER
Material Version B: Steel with corrosion protection (inner bush and nut nickel-plated, outer bush zinc-plated).
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For medium torques.
• Self-centering.
• Axial offset during mounting (can be compensated by correct positioning).- Volume Discount
Configure nowStarting from∗ ： 14.38 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies TMK Version A
MAEDLER
Material Version A: Steel, bright.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For medium torques.
• Self-centering.
• With a second hexagon to hold against while tightening the nut.
• Axial offset during mounting (can be compensated by correct positioning).- Volume Discount
Configure nowStarting from∗ ： 15.34 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
- Promotional pricing
Mecha-Lock MKA, Rust-Proof Standard Electroless Nickel Plating Specifications
ISEL
Centering function suppresses outer circumference and terminal surface run-out. Electroless nickel plated product.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 56.59 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Mecha-Lock MKN, Rust-Proof Nut Tightening Type, Electroless Nickel Plating Specifications
ISEL
Nut tightening shortens tightening time. Electroless nickel plated product.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 90.75 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing
Mega Lock, MC, Standard Type (Aluminum Specifications)
ISEL
· 22 models from φ4 to φ35 shaft diameter available as standard
· Supports aluminum timing pulleys (steel is also usable)
· Reduced number of bolts shortens attachment/detachment time
· With a spigot joint on the back, it can also be used as a bearing retainer
· With low surface pressure, it is also ideal for hollow shafts- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 31.33 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Mechanical Lock MSA Rust-proof Standard Stainless Steel Specifications
ISEL
Centering function suppresses outer circumference and terminal surface run-out. Stainless steel specifications.- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 87.21 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Keyless Bushing, Standard Type (with Centering Function)
CAP
Brand-name products provided by MISUMI-VONA are offered based on customers' needs that selected from products of Asian manufacturers carefully. Please select an item according to the user's various usage scenes. CAPT This company is developing domestic and foreign high-quality and inexpensive keyless bushing and sprockets. We are adopting not only more Chinese but also Japanese manufacturers.- 2D CAD data available
Configure nowStarting from∗ ： 12.70 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Keyless Bushing A.P.LOCK SAPL-AS Series
SUNGIL
[Features]
· Self-centering function: Prevents minute Off-centering.
· Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface.
· Internal diameters 4.5ø to 40ø standardized.
· Has simple structure for easy assembly.
· Choose from stainless steel (vacuum environments) or electroless nickel plated products (corrosion proof) to suit the use environment- 2D CAD data available
Configure nowStarting from∗ ： 67.20 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Locking Assemblies BAR
MAEDLER
Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For medium torques.
• Very good distribution of pressure.
• Very good self-centering.
• Self-releasing at dismounting.
• Also suitable for large hub and shaft tolerances.
• Slight axial offset possible during assembly.- Volume Discount
Configure nowStarting from∗ ： 24.10 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies TMK Version B
MAEDLER
Material Version B: Steel with corrosion protection (inner bush and nut nickel-plated, outer bush zinc-plated).
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For medium torques.
• Self-centering.
• With a second hexagon to hold against while tightening the nut.
• Axial offset during mounting (can be compensated by correct positioning).- Volume Discount
Configure nowStarting from∗ ： 17.43 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Mecha Lock MA, Standard High-Torque Type
ISEL
Centering function suppresses outer circumference and terminal surface run-out. High torque specifications.
[Features]
· 21 models that have shaft diameters standardized from ø25 to ø150.
· High torque transmission specifications.
· With centering function.
· Loose design of slope angle degrees produces a self-locking effect.
· Hub internal diameter can be used with pass-through machining, wide range of options available during design- Volume Discount
- 2D / 3D CAD data available
Configure nowStarting from∗ ： 76.34 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing
Keyless Bushing, Centering Type SES
Save & Secure
Centering type of keyless bushing. Abundant variations to choose from, with allowable torque from 6.2 to 13000N·m. The SS company manufactures a 20% share of the couplings in Taiwan. The company's are centered on China and Southeast Asia, and is trying to expand both its domestic and foreign shares.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 23.63 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Keyless Bushing A.P.LOCK SAPL-A Series
SUNGIL
[Features]
· Self-centering function: Prevents minute Off-centering.
· Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface.
· Internal diameters 4.5ø to 40ø standardized.
· Has simple structure for easy assembly.
· Choose from stainless steel (vacuum environments) or electroless nickel plated products (corrosion proof) to suit the use environment- 2D CAD data available
Configure nowStarting from∗ ： 19.79 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Keyless Bushing A.P.LOCK SAPL-AK Series
SUNGIL
[Features]
· Self-centering function: Prevents minute Off-centering.
· Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface.
· Internal diameters 4.5ø to 40ø standardized.
· Has simple structure for easy assembly.
· Choose from stainless steel (vacuum environments) or electroless nickel plated products (corrosion proof) to suit the use environment- 2D CAD data available
Configure nowStarting from∗ ： 24.96 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing
Keyless Bushing A.P.LOCK SAPL-B Series
SUNGIL
[Features]
· Self-centering function: Prevents minute Off-centering.
· SAPL-A Depending on the type, the cover outer diameter and bolt size are both large, providing comparatively high durability relative to the corresponding internal diameter.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 27.26 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Locking Assemblies COM-CB3
MAEDLER
Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• 3 Ranges of sizes, for middle, higher and very high torques.
• Compact size in axial direction.
• Self-centering.
• Self-locking.
• No axial movement during mounting.- Volume Discount
Configure nowStarting from∗ ： 12.62 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies TT 3-16 mm
MAEDLER
Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For high torques.
• Self-centering.
• Axial offset during mounting (can be compensated by correct positioning).- Volume Discount
Configure nowStarting from∗ ： 31.75 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies SSG
MAEDLER
Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For low to medium torques.
• Also suitable for small hub diameters.
• Self-centering.
• Self-locking.
• Axial movement during mounting.- Volume Discount
Configure nowStarting from∗ ： 15.03 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Clamping Bushes MSD
MAEDLER
Material: Steel.
The MSD clamping bush consists of a double-walled, hardened steel sleeve filled with a special pressure medium, a seal, a piston, a compression flange and fastening screws. When tightening the screws, the sleeves expand evenly against shaft and hub, creating a rigid connection. When the screws are loosened, the bush returns to its initial position and can be easily demounted.
Concentricity: ≈ 0.03 - 0.06 mm.
Tolerance: Shaft h8 - k6 (for Prod. No. 615 215 00 only h7), Hub H7.
Temperature range: -30 °C to 85 °C.
PW ≈ 90N/mm² PN ≈ 70N/mm132- Volume Discount
Configure nowStarting from∗ ： 192.36 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
- Promotional pricing
KanaLock, Model KL201MA, Standard Type
KATAYAMA CHAIN
Assembling it suppresses hub terminal surface and outer circumference vibration, constraints gear interval backlash, and also reduces belt vibration noise caused by timing pulley vibration.
[Features]
· Assembling KL201MA suppresses hub terminal surface and outer circumference vibration, constraints gear interval backlash, and also reduces belt drive noise caused by timing pulley vibration.
· Compatible shaft diameters are ø5 to ø85, and compatible shaft tolerances are g5, g6, h5, h6, h7, and h8- Volume Discount
Configure nowStarting from∗ ： 53.37 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
- Promotional pricing
Keyless Bushing, Self-Aligning Type SDS
Save & Secure
Self-centering type of keyless bushing. Abundant variations to choose from, with allowable torque from 6.2 to 13000N·m. The SS company manufactures a 20% share of the couplings in Taiwan. The company's are centered on China and Southeast Asia, and is trying to expand both its domestic and foreign shares.- Volume Discount
- 3D CAD data available
Configure nowStarting from∗ ： 24.33 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Keyless Bushing A.P.LOCK SAPL-C Series
SUNGIL
[Features]
· Self-centering function: Prevents minute Off-centering.
· Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface. (Most compact design A.P. Lock)
· Suitable for short hubs.
· Internal ring mounts to the terminal face, preventing the hub from moving when connected.
· Choose from stainless steel or electroless nickel plated products to suit the use environment.- 2D CAD data available
Configure nowStarting from∗ ： 29.24 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
- Promotional pricing
Keyless Bushing A.P.LOCK SAPL-CK Series
SUNGIL
[Features]
· Self-centering function: Prevents minute Off-centering.
· Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface. (Most compact design A.P. Lock)
· Suitable for short hubs.
· Internal ring mounts to the terminal face, preventing the hub from moving when connected.
· Choose from stainless steel or electroless nickel plated products to suit the use environment.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 35.43 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Keyless Bushing A.P.LOCK SAPL-CS Series
SUNGIL
[Features]
· Self-centering function: Prevents minute Off-centering.
· Difference between internal diameter (d) and outer diameter (D) is slight, and can also be installed to small hubs with light pressure on its surface. (Most compact design A.P. Lock)
· Suitable for short hubs.
· Internal ring mounts to the terminal face, preventing the hub from moving when connected.
· Choose from stainless steel or electroless nickel plated products to suit the use environment.- 2D CAD data available
Configure nowStarting from∗ ： 74.76 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Locking Assemblies BAR, QPQ-Coated
MAEDLER
Material: Steel.
• For fixing a hub on a shaft.
• QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below).
• For medium torques.
• Self-centering.
• Slight axial offset possible during assembly.- Volume Discount
Configure nowStarting from∗ ： 27.57 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies BAR, Stainless
MAEDLER
Material: Stainless steel 1.4401 (AISI 316).
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• Stainless Steel.
• For low torques.
• Very good distribution of pressure.
• Very good self-centering.
• Self-releasing at dismounting.
• Also suitable for large hub and shaft tolerances.
• Slight axial offset possible during assembly.- Volume Discount
Configure nowStarting from∗ ： 92.91 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies COM-B, QPQ-Coated
MAEDLER
Material: Steel.
• For fixing a hub (e.g. timing belt pulley or similar) on a shaft.
• QPQ coated: High corrosion resistance, improved fatigue strength, primarily food safe (further information see below).
• For medium torques.
• Also suitable for small hub diameters.
• Self-centering.
• Self-locking.
• No axial movement during mounting.- Volume Discount
Configure nowStarting from∗ ： 21.01 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies COM-B, Stainless
MAEDLER
Material: Stainless steel 1.4401 (AISI 316).
• For fixing a hub (e.g. timing belt pulley or similar) on a shaft.
• For low torques.
• Also suitable for small hub diameters.
• Self-centering.
• Self-locking.
• No axial movement during mounting.- Volume Discount
Configure nowStarting from∗ ： 68.67 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies COM-C
MAEDLER
Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For medium to high torques.
• Self-centering.
• No axial offset.
Concentricity: 0.02 to 0.04 mm.- Volume Discount
Configure nowStarting from∗ ： 19.37 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies COM-C, Stainless
MAEDLER
Material: Stainless steel 1.4401 (AISI 316).
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For medium torques.
• Self-centering.
• No axial offset.
Concentricity: 0.02 to 0.04 mm.- Volume Discount
Configure nowStarting from∗ ： 70.20 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies COM-CB1
MAEDLER
Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For medium high torques.
• Self-centering.
• Self-locking.
• Axial movement during mounting.- Volume Discount
Configure nowStarting from∗ ： 11.89 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies COM-CB2
MAEDLER
Material: Steel.
• For fixing a hub (e.g. spur toothed gear or similar) on a shaft.
• For medium high torques.
• Self-centering.
• Self-locking.
• No axial movement during mounting.- Volume Discount
Configure nowStarting from∗ ： 12.26 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies COM-D
MAEDLER
Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For high torques.
• Self-centering.
• Slight axial offset possible during assembly.
Concentricity: 0.02 to 0.04 mm.- Volume Discount
Configure nowStarting from∗ ： 16.15 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies COM-L
MAEDLER
Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For very high torques.
• Self-centering.
• Slight axial offset possible during assembly.
Concentricity: 0.02 to 0.04 mm.
* When using in a stepped bore, the clearance C is to be foreseen for demounting.- Volume Discount
Configure nowStarting from∗ ： 28.98 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies COM-LL
MAEDLER
Material: Steel.
• For fixing a hub (e.g. drive wheel, rotor or similar) on a shaft.
• For very high torques.
• Self-centering.
• Self-locking.
• Axial movement during mounting.- Volume Discount
Configure nowStarting from∗ ： 31.43 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking Assemblies COM-LLH
MAEDLER
Material: Steel.
• For fixing a hub (e.g. sprocket or similar) on a shaft.
• For very high torques.
• Very good distribution of pressure.
• High resistant against bending forces.
• Self-centering.
• Self-locking.
• No axial movement during mounting.- Volume Discount
Configure nowStarting from∗ ： 52.26 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Type |
| Centering |
| Body Material |
| Shaft Bore Dia. d(Ø) |
| Allowable Torque Range(N•m) |
| Surface Treatment |
| Hub Dia. D1(Ø) |
| Tightening Structure |
| Tightening Method |
| Allowable Torque(N•m) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | ISEL | MAEDLER | MAEDLER | ISEL | MAEDLER | ISEL | MAEDLER | MAEDLER | MAEDLER | ISEL | ISEL | ISEL | ISEL | CAP | SUNGIL | MAEDLER | MAEDLER | ISEL | Save & Secure | SUNGIL | SUNGIL | SUNGIL | MAEDLER | MAEDLER | MAEDLER | MAEDLER | KATAYAMA CHAIN | Save & Secure | SUNGIL | SUNGIL | SUNGIL | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER | MAEDLER |
| Product Series | Mecha-Lock MKA, Rust-Proof Standard Electroless Nickel Plating Specifications | Mecha-Lock MKN, Rust-Proof Nut Tightening Type, Electroless Nickel Plating Specifications | Mechanical Lock MSA Rust-proof Standard Stainless Steel Specifications | ||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||
| Starting from∗ | 35.76 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 31.74 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 38.74 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 12.35 € *Unit price with basic configuration Volume Discount | 28.82 € *Unit price with basic configuration Volume Discount | 46.53 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 18.43 € *Unit price with basic configuration Volume Discount | 46.50 € *Unit price with basic configuration | 33.68 € *Unit price with basic configuration Volume Discount | 14.38 € *Unit price with basic configuration Volume Discount | 15.34 € *Unit price with basic configuration Volume Discount | 56.59 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 90.75 € *Unit price with basic configuration | 31.33 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 87.21 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 12.70 € *Unit price with basic configuration | 67.20 € *Unit price with basic configuration | 24.10 € *Unit price with basic configuration Volume Discount | 17.43 € *Unit price with basic configuration Volume Discount | 76.34 € *Unit price with basic configuration Volume Discount | 23.63 € Special price *Unit price with basic configuration Promotional pricing | 19.79 € *Unit price with basic configuration | 24.96 € *Unit price with basic configuration | 27.26 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 12.62 € *Unit price with basic configuration Volume Discount | 31.75 € *Unit price with basic configuration Volume Discount | 15.03 € *Unit price with basic configuration Volume Discount | 192.36 € *Unit price with basic configuration Volume Discount | 53.37 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 24.33 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 29.24 € *Unit price with basic configuration | 35.43 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 74.76 € *Unit price with basic configuration | 27.57 € *Unit price with basic configuration Volume Discount | 92.91 € *Unit price with basic configuration Volume Discount | 21.01 € *Unit price with basic configuration Volume Discount | 68.67 € *Unit price with basic configuration Volume Discount | 19.37 € *Unit price with basic configuration Volume Discount | 70.20 € *Unit price with basic configuration Volume Discount | 11.89 € *Unit price with basic configuration Volume Discount | 12.26 € *Unit price with basic configuration Volume Discount | 16.15 € *Unit price with basic configuration Volume Discount | 28.98 € *Unit price with basic configuration Volume Discount | 31.43 € *Unit price with basic configuration Volume Discount | 52.26 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | Same day | Same day | Same day | 4 Days | 4 Days | Same day | 4 Days | 5 Days | 4 Days | 4 Days | 4 Days | Same day | 5 Days | Same day | Same day | 10 Days | 10 Days | 4 Days | 4 Days | 5 Days | Same day | 5 Days | 5 Days | Same day | 4 Days | 4 Days | 4 Days | 4 Days | Same day | Same day | 10 Days | Same day | 5 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days | 4 Days |
| Specifications |
|
| |||||||||||||||||||||||||||||||||||||||||||
| Type | Flanged | Thin Wall | Flanged | - | - | Nut Tightening | - | Thin Wall | - | - | - | Flanged | Nut Tightening | Flanged | Flanged | Flanged | Flanged | - | - | Flanged | Flanged | Flanged | Flanged | Flanged | - | - | - | - | Straight | Flanged | Thin Wall | Thin Wall | Thin Wall | - | - | - | - | - | - | - | - | - | - | - | - |
| Centering | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided |
| Body Material | Steel / Stainless Steel | Steel / Stainless Steel | Steel | - | - | Steel | - | Steel | - | - | - | Steel | Steel | Aluminum | Stainless Steel | Steel | Stainless Steel | - | - | Steel | Steel | Steel | Steel | Steel | - | - | - | - | Steel | Steel | Steel | Steel | Stainless Steel | - | - | - | - | - | - | - | - | - | - | - | - |
| Shaft Bore Dia. d(Ø) | 5 ～ 70 | 5 ～ 50 | 5 ～ 70 | - | - | 8 ～ 35 | - | 6 ～ 50 | - | - | - | 8 ～ 50 | 8 ～ 35 | 4 ～ 35 | 8 ～ 50 | 15 ～ 70 | 5 ～ 40 | - | - | 25 ～ 50 | 8 ～ 12 | 5 ～ 50 | 5 ～ 50 | 8 ～ 30 | - | - | - | - | 6.35 ～ 24 | 20 | 5 ～ 30 | 5 ～ 30 | 5 ～ 30 | - | - | - | - | - | - | - | - | - | - | - | - |
| Allowable Torque Range(N•m) | 2.0 to 20.0 ～ 3000.1 to 10000.0 | 2.0 to 20.0 ～ 1000.1 to 3000.0 | 2.0 to 20.0 ～ 3000.1 to 10000.0 | - | - | 20.1 to 50.0 ～ 300.1 to 500.0 | - | 2.0 to 20.0 ～ 1000.1 to 3000.0 | - | - | - | 20.1 to 50.0 ～ 1000.1 to 3000.0 | 20.1 to 50.0 ～ 300.1 to 500.0 | 2.0 to 20.0 ～ 200.1 to 300.0 | 20.1 to 50.0 ～ 700.1 to 1000.0 | - | 2.0 to 20.0 ～ 300.1 to 500.0 | - | - | 300.1 to 500.0 ～ 1000.1 to 3000.0 | 2.0 to 20.0 ～ 20.1 to 50.0 | 2.0 to 20.0 ～ 1000.1 to 3000.0 | 2.0 to 20.0 ～ 1000.1 to 3000.0 | 2.0 to 20.0 ～ 500.1 to 700.0 | - | - | - | - | 2.0 to 20.0 ～ 300.1 to 500.0 | 300.1 to 500.0 | 2.0 to 20.0 ～ 500.1 to 700.0 | 2.0 to 20.0 ～ 500.1 to 700.0 | 2.0 to 20.0 ～ 150.1 to 200.0 | - | - | - | - | - | - | - | - | - | - | - | - |
| Surface Treatment | Not Provided / Black Oxide / Electroless Nickel Plating | Not Provided / Electroless Nickel Plating | Not Provided | - | - | Not Provided | - | Not Provided | - | - | - | Electroless Nickel Plating | Electroless Nickel Plating | Clear Anodize | Not Provided | Not Provided | Not Provided | - | - | Not Provided | Not Provided | Not Provided | Electroless Nickel Plating | Not Provided | - | - | - | - | Not Provided | Not Provided | Not Provided | Electroless Nickel Plating | Not Provided | - | - | - | - | - | - | - | - | - | - | - | - |
| Hub Dia. D1(Ø) | 16 ～ 97 | 12 ～ 65 | 16 ～ 97 | - | - | 14 ～ 48 | - | 12 ～ 65 | - | - | - | 21 ～ 72 | 14 ～ 48 | 15 ～ 56 | 21 ～ 72 | - | 16 ～ 62 | - | - | 47 ～ 78 | 22 ～ 26 | 16 ～ 72 | 16 ～ 72 | 22 ～ 55 | - | - | - | - | 20 ～ 42 | 47 | 12 ～ 41 | 12 ～ 41 | 12 ～ 41 | - | - | - | - | - | - | - | - | - | - | - | - |
| Tightening Structure | Single Cone Type | Single Cone Type | Single Cone Type | - | - | Tapered Sleeve Type | - | Tapered Sleeve Type | - | - | - | Single Cone Type | Tapered Sleeve Type | Single Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | - | - | Single Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | - | - | - | - | Single Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | Single Cone Type | - | - | - | - | - | - | - | - | - | - | - | - |
| Tightening Method | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | - | - | Mechanical Type (Wedge Type) | - | Mechanical Type (Wedge Type) | - | - | - | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | - | - | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | - | - | - | - | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | Mechanical Type (Wedge Type) | - | - | - | - | - | - | - | - | - | - | - | - |
| Allowable Torque(N•m) | 2.8 ～ 3400 | 3 ～ 2120 | 7 ～ 3400 | - | - | 29.4 ～ 461 | - | 11 ～ 2120 | - | - | - | 16.6 ～ 1362 | 29.4 ～ 461 | 2 ～ 230 | 10.7 ～ 754.3 | 0.098 ～ 2.432 | 2.8 ～ 430.6 | - | - | 490 ～ 2430 | 18 ～ 47 | 7 ～ 1500 | 4.6 ～ 1362 | 18 ～ 510 | - | - | - | - | 12.7 ～ 363 | 320 | 9 ～ 523 | 9 ～ 523 | 3 ～ 168 | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Type
-
Flanged -
Straight -
Nut Tightening -
Thin Wall -
Direct Mounting -
Sleeve
-
-
Centering
- Provided
- Not Provided
-
Body Material
- Steel
- Stainless Steel
- Aluminum
- Grey Iron
-
Shaft Bore Dia. d(Ø)
-
Allowable Torque Range(N•m)
-
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
- Clear Anodize
-
Hub Dia. D1(Ø)
-
Tightening Structure
-
Tightening Method
-
Allowable Torque(N•m)
Brand
-
- MAEDLER (31)
- ISEL (8)
- SUNGIL (7)
- Save & Secure (2)
- CAP (1)
- KATAYAMA CHAIN (1)
- EVER-ON CORPORATION (0)
- RINGFEDER (0)
- NORELEM (0)
- HALDER (0)
- OPTIBELT (0)
- KBK (0)
- MIKI PULLEY (0)
- CONCAR (0)
CAD data type
-
- 2D
- 3D
Examples how you can use these components
Categories related to Keyless Bushing (Fastening Fittings)
Metody płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.