Spring Locating Pins

?* Information on days to ship and prices

• 

  Spring Pins

  MISUMI

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.90 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Spring plungers, with slot, Steel / Stainless Steel

  GANTER

  Spring plungers GN 615 are used as detents as well as for push-on and push-off applications and ejectors.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.26 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Lateral Plungers, smooth

  HALDER

  To be used for positioning and applying pressure, e.g. during painting and sandblasting.
  

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.03 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Spring Locating Pin (BJ765, BJ766)

  IMAO CORPORATION

  [Features]
  - Ideal for holding work.
  - Pin material: Steel and resin
  - Select whether to include seals for each.
  - The seal prevents foreign matter from getting inside.
  - Extremely compact spring clamp

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.66 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Spring Stop PST

  NABEYA BI-TECH

  [Features]
  - For positioning workpieces, stoppers, etc.
  - Built-in spring absorbs shocks to machinery or equipment.
  - Stainless steel main body.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	50.82 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Spring Plungers Press on Type / Plastic, Brass, Stainless, Stainless Steel / GN 614

  GANTER

  Spring plungers GN 614 are used as detents as well as for push-on and push-off applications and ejectors.
  A tolerance of H7 for the location hole of d1 is recommended.
  Due to different production methods, the dimensions l2 and l3 are different.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.88 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Spring Loaded Fixture Pin

  MISUMI

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	15.82 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Quick Pin Plunger PQC

  NABEYA BI-TECH

  Single-Action Operated Quick Pin Plunger
  [Features]
  · Enables workpieces to be positioned and fixed in place.
  · Select pin material / whether or not to have a packing using the trailing sign of the item number.
  [Applications]
  · For fixing workpieces in place with a single action.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.85 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Spring loaded shells

  GANTER

  Spring loaded shells GN 610 have been designed for applications where in a confined space relatively long strokes are required. In such cases the depth of the mounting hole is determined by the preload required.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.48 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Spring Plungers with Bolt / Steel / GN 615.1

  GANTER

  Spring plungers GN 615.1 are used as detents as well as for push-on and push-off applications and ejectors.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.72 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Spring Body SBR

  KONISHI MFG

  [Features]
  · The pin and spring are integrated and the plunger is the most simplified type.
  · The ball plunger can be used as the receiving side.
  · Pressing in or driving in for mounting.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.66 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Side thrust pins with thread / GN713

  GANTER

  Spring loaded side thrust pins GN713 are versatile and practical elements for holding, positioning and clamping workpieces.
  They eliminate costly alternatives, are space saving and simple to install. The protruding height of the thrust pin can be adjusted with the threaded body.
  For easy mounting a suitable tool GN 713.1 -... is available (see table).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.92 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Spring plungers with internal hexagon, Steel / Stainless Steel

  GANTER

  Spring plungers with internal hexagon, Steel / Stainless Steel

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.08 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Long Sleeve Plungers

  MISUMI

  [Features] Since a long pin guide is used, it has a strong structure against diagonal loads.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	43.83 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Spring elements

  GANTER

  Spring elements GN 513 are universal pressure elements used as detents, positioners or for clamping with spring pressure. The spring loaded nose can be used for a push-on or push-off operation. In addition the spring loaded nose cannot rotate.
  At the pulling end the female thread will accept a pulling rod or an operating knob.
  Type I with a female thread at the pushing end can be fitted with a special plunger nose.
  The spring element can be screwed into a thread at the hexagon on the pulling end or the spanner flats at the pushing end of the plunger.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.62 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Spring plungers with bolt internal hexagon/ Steel / GN 616

  GANTER

  Spring plungers GN 616 are used as detents as well as for push-on and push-off applications and ejectors.
  The slot on the plunger side is provided for blind hole applications. A special screw driver GN 616.5-... is available (see table).
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.26 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Ball buttons spring plungers

  GANTER

  [Specifications]
  ・d1:12
  ・d2: 6
  
  Ball buttons GN 249.1 are mainly used with spring plungers when low wear and exact positioning are needed.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.86 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Side Thrust Pins Press on Type / Housing Aluminium blank / GN 715

  GANTER

  Spring loaded side thrust pins GN 715 are versatile and practical elements for holding, positioning and clamping of workpieces.
  They eliminate costly alternatives, are space saving and easy to install. The knurled body requires only a hole tolerance of H8.
  For easy mounting a suitable tool GN 715.1 -... is available. (see table).
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.98 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Spring plungers with bolt, Stainless Steel

  GANTER

  Stainless Steel-Spring plungers GN 616 are used as detents as well as for push-on and push-off applications and ejectors.
  The slot on the plunger side is provided for blind hole applications. A special screw driver GN 616.5-... is available (see table).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.92 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Spring plungers with limit switch

  GANTER

  Spring plungers GN 615.7 are used for end stops as well as contacts.
  Simultaneously an electrical control signal can be released from the built-in limit switch.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	130.82 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Spring plungers with collar, Stainless Steel

  GANTER

  Spring plungers Stainless Steel GN 815 are used as stops as well as thrust elements or ejectors.
  The collar gives a defined installation position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.66 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Side Thrust Pins with Thread / ZD. Zinc die casting / GN 415

  GANTER

  [Specifications]
  ・Material: ZD. Zinc die casting
  
  [Features]
  ・Side thrust pins GN 415 have a compact design and offer maximum flexi-bility for tensioning and holding parts. A variety of thrust pin designs as well as two different spring forces are available.
  ・Depending on the installation situation, the side thrust pins offer a pull-down effect operating within height h2. They are fastened by means of holes or slots.
  ・The side thrust pins are installed fully assembled. If necessary, the instal-lation position of the thrust pin slide can be rotated by 4x90° according tothe sketch. When installing version KG, the shaped thread in the plastic slider should be reused and the tightening torque limited.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.48 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Lateral Plungers, with thread

  HALDER

  To be used for positioning and applying pressure, e.g. during painting and sandblasting.
  

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.25 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Screw drivers for spring plungers GN 616

  GANTER

  Accessories for spring plungers GN 616.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.16 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Spring Body Cone Type SBC

  KONISHI MFG

  [Features]
  · An extremely simplified type plunger in which the pin and spring are integrated.
  · The ball plunger can be used on the receiving side.
  · Install by pressing or driving in.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.35 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Spring Plungers Press on Type / Housing Stainless Steel AISI 305 / GN 614.4

  GANTER

  Spring plungers GN 614.4 are used for locking, as pressing and back-off pins, but also as impact dampers.
  A tolerance of H7 for the location hole of d1 is recommended.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.06 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Spring plungers, press on type with ball / GN 614.5

  GANTER

  Spring plungers GN 614.5 are used as detents as well as for push-on and push-off applications and ejectors.
  The geometric shape of the plastic housing generates a self-clamping function which compensates drill hole tolerances of as much as 0,2 mm. It also allows the hand-tightened assembly and makes overhead installation easier.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.08 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Spring plungers, with bolt, Steel

  GANTER

  Spring plungers GN 615.4 are used as detents as well as for push-on and push-off applications and ejectors.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.20 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Spring sleeves, Form C (K1277)

  KIPP

  · Indexing and positioning element
  
  · Application sectors: machine and plant construction, trade, domestic
  
  · Universally applicable

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.39 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Block Plungers

  MISUMI

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	22.03 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Side Plunger (WP1, WPU)

  IMAO CORPORATION

  Please use for temporary work fixing. The body internals are spring type and elastic polyurethane type. The selected spring type has a choice of SUS ball or engineering plastic ball.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	23.64 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Double End Plungers DEP

  KONISHI MFG

  Plungers with built-in balls on both sides. Use for positioning when an even load is required on both sides.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.76 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Mounting tools for GN 713

  GANTER

  [Specifications]
  ・Type: 713.1
  
  Mounting tools for GN 713

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	21.38 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Side thrust pins, press on type / GN 716

  GANTER

  Side thrust pins GN 716 are designed for holding, positioning and locating a workpiece.
  They have to be pressed into the housing by at least the dimension l3, so as to ensure a positive hold.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.86 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Spring plungers with thread locking

  GANTER

  The PFB patch is a jamming thread locking (Polyamide patch). The coating for Type K or KN (standard spring load) is indicated blue, for Type KS or KSN (high spring load) green. For this Type of thread locking a relatively high torque is required. Therefore this version with internal hexagon is more preferable than the version with slot (GN 615).
  MVK (Micro encapsulation) is a gluing thread locking (indicated red).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.76 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Spring sleeves, Form B (K1277)

  KIPP

  · Indexing and positioning element
  
  · Application sectors: machine and plant construction, trade, domestic
  
  · Universally applicable

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.33 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Spring sleeves, Form A (K1277)

  KIPP

  · Indexing and positioning element
  
  · Application sectors: machine and plant construction, trade, domestic
  
  · Universally applicable

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.33 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Spring sleeves, Form C (03078)

  NORELEM

  · Indexing and positioning element
  
  · Application sectors: machine and plant construction, trade, domestic
  
  · Universally applicable

  Select to compare

  Configure now
  Starting from∗ ：	0.48 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Double Ball Plungers, PWF

  NABEYA BI-TECH

  Mini ball plungers containing balls at both ends. Enables positioning on both surfaces.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.68 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Literal Plungers LP, LP-D

  KONISHI MFG

  This is a plunger that can be positioned from the side. Type: Side plunger

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	25.99 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Literal Plungers LP-H, LP-W

  KONISHI MFG

  Heavy-load plungers that allow positioning from the side. Single ball double ball types available.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	45.82 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Lateral Plungers, Plastic INCH

  HALDER

  Use for positioning and pressing. For example, when coating or sandblasting.

  Select to compare

  Configure now
  Starting from∗ ：	5.76 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Spring plungers, Ball with friction bearing, with internal hexagon (GN 615.9 )

  GANTER

  GN 615.9 spring plungers are used for locking as well as for pressure and hold-off functions.
  
  The ball is mounted in a plastic shell so as to be freely movable, which enables rolling and therefor generally optimizes the locking characteristics. Above all, this reduces wear on the counter piece.
  
  A further characteristic of these plungers is that the plastic bearing acts as an electrical insulator.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.62 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Spring plungers, Ball with friction bearing, with slot (GN 615.8 )

  GANTER

  GN 615.8 Spring plungers are used for locking as well as for pressure and hold-off functions.
  
  The ball is mounted in a plastic shell so as to be freely movable, which enables rolling and therefor generally optimizes the locking characteristics. Above all, this reduces wear on the counter piece.
  
  A further characteristic of these plungers is that the plastic bearing acts as an electrical insulator.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.86 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Spring plungers, with ball, with collar, with internal hexagon

  GANTER

  Spring plungers GN 815.1 are used as stops as well as thrust elements or ejectors. The collar gives a defined installation position.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.36 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

Loading...