Tłumaczymy nasz sklep na język polski!
Wymaga to jednak czasu, ponieważ w ofercie mamy dużo artykułów, a na nasz sklep składa się wiele stron. Chwilowo nasz katalog produktów dostępny będzie w języku angielskim. Dziękujemy za cierpliwość!
Indexing Plungers (Body Material: Stainless Steel Strona 8)
Liczba pozycji: 328
* Informacje o dniach wysyłki, kosztach wysyłki i cenach.
KIPP
Material: Steel version Indexing pin hardened: grade 5.8. Stainless steel version Indexing pin hardened: Threaded body 1.4305 (AISI 303 equivalent). Indexing pin 1.4034 (AISI 420 equivalent). Indexing pin not hardened: Threaded body 1.4305 (AISI 303 equivalent). Indexing pin 1.4305 (AISI 303 equivalent). Mushroom knob black-gray thermoplastic. Version: Steel version: Indexing pin hardened, ground, black oxidised. Stainless steel version: Indexing pin hardened, ground and bright. Indexing pin not hardened, ground and bright. Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been manually disengaged. A washer is available to aid by screwing in the indexing plungers. The washer slides beneath the mushroom knob so that the carrier pins engage in the slot. On request: Special versions. Accessory: Spacer rings K0665.Czytaj dalejType Locking Mechanism Mounting Method Overall Length Body Material All Stainless Tip Material Body O.D./Thread M(mm) Stroke S(mm) - - - - Stainless Steel - - - - KonfigurujCena (bez VAT) od:12.36 €Standardowa data wysyłki:5 dni robocze
KIPP
Material: Steel version Indexing pin hardened: grade 5.8. Stainless steel version Indexing pin hardened: Threaded body 1.4305 (AISI 303 equivalent). Indexing pin 1.4034 (AISI 420 equivalent). Indexing pin not hardened: Threaded body 1.4305 (AISI 303 equivalent). Indexing pin 1.4305 (AISI 303 equivalent). Mushroom knob black-gray thermoplastic. Version: Steel version: Indexing pin hardened, ground, black oxidised. Stainless steel version: Indexing pin hardened, ground and bright. Indexing pin not hardened, ground and bright. Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been manually disengaged. A washer is available to aid by screwing in the indexing plungers. The washer slides beneath the mushroom knob so that the carrier pins engage in the slot. On request: Special versions. Accessory: Spacer rings K0665.Czytaj dalejType Locking Mechanism Mounting Method Overall Length Body Material All Stainless Tip Material Body O.D./Thread M(mm) Stroke S(mm) - - - - Stainless Steel - - - - KonfigurujCena (bez VAT) od:13.34 €Standardowa data wysyłki:5 dni robocze
KIPP
Material: Steel version Indexing pin hardened: grade 5.8. Stainless steel version Indexing pin hardened: Threaded body 1.4305 (AISI 303 equivalent). Indexing pin 1.4034 (AISI 420 equivalent). Indexing pin not hardened: Threaded body 1.4305 (AISI 303 equivalent). Indexing pin 1.4305 (AISI 303 equivalent). Mushroom knob black-gray thermoplastic. Version: Steel version: Indexing pin hardened, ground, black oxidised. Stainless steel version: Indexing pin hardened, ground and bright. Indexing pin not hardened, ground and bright. Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been manually disengaged. A washer is available to aid by screwing in the indexing plungers. The washer slides beneath the mushroom knob so that the carrier pins engage in the slot. On request: Special versions. Accessory: Spacer rings K0665.Czytaj dalejType Locking Mechanism Mounting Method Overall Length Body Material All Stainless Tip Material Body O.D./Thread M(mm) Stroke S(mm) - - - - Stainless Steel - - - - KonfigurujCena (bez VAT) od:13.54 €Standardowa data wysyłki:5 dni robocze
KIPP
Material: Steel version Indexing pin hardened: grade 5.8. Stainless steel version Indexing pin hardened: Threaded body 1.4305 (AISI 303 equivalent). Indexing pin 1.4034 (AISI 420 equivalent). Indexing pin not hardened: Threaded body 1.4305 (AISI 303 equivalent). Indexing pin 1.4305 (AISI 303 equivalent). Mushroom knob black-gray thermoplastic. Version: Steel version: Indexing pin hardened, ground, black oxidised. Stainless steel version: Indexing pin hardened, ground and bright. Indexing pin not hardened, ground and bright. Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been manually disengaged. A washer is available to aid by screwing in the indexing plungers. The washer slides beneath the mushroom knob so that the carrier pins engage in the slot. On request: Special versions. Accessory: Spacer rings K0665.Czytaj dalejType Locking Mechanism Mounting Method Overall Length Body Material All Stainless Tip Material Body O.D./Thread M(mm) Stroke S(mm) - - - - Stainless Steel - - - - KonfigurujCena (bez VAT) od:14.61 €Standardowa data wysyłki:5 dni robocze
KIPP
Material: Steel version Indexing pin hardened: grade 5.8. Stainless steel version Indexing pin hardened: Threaded body 1.4305 (AISI 303 equivalent). Indexing pin 1.4034 (AISI 420 equivalent). Indexing pin not hardened: Threaded body 1.4305 (AISI 303 equivalent). Indexing pin 1.4305 (AISI 303 equivalent). Version: Steel version: Indexing pin hardened, ground, black oxidised. Stainless steel version: Indexing pin hardened, ground and bright. Indexing pin not hardened, ground and bright. Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been disengaged. Special grips can be fitted on the projecting threaded pin. This pin is also suitable for automatic actuation by e.g. program controlled pneumatic cylinder or by remote control using bowden cables. A washer is available to aid screwing in the indexing plungers. The washer is placed on the threaded body so that the carrier pins engage in the slot. On request: Special versions. Accessory: Spacer rings K0665.Czytaj dalejType Locking Mechanism Mounting Method Overall Length Body Material All Stainless Tip Material Body O.D./Thread M(mm) Stroke S(mm) - - - - Stainless Steel - - - - KonfigurujCena (bez VAT) od:13.29 €Standardowa data wysyłki:5 dni robocze
KIPP
Product description: Cam-action indexing plungers are used where any change in locking position due to lateral forces should be prevented. Turning the grip through 180° retracts the indexing pin, enabling a change in the indexed position. The notch ensures that the grip remains in this position and the indexing pin remains retracted. Material: Threaded sleeve and grip 1.4308. Indexing pin 1.4305. Spring 1.4310. Version: Threaded sleeve, spring and grip bright. Indexing pin ground and bright. Application: The closed construction of these indexing plungers with internal guide permits them to be installed in places subject to heavy soiling e.g. dust and airborn sparks. Advantages: - The indexing pin is retracted by rotating the grip through 180°. - The closed design prevents dirt from entering the threaded sleeve. - The hexagon on the sleeve facilitates easy installation of the indexing plunger. On request: Special versions. Accessory: Mounting bracket K0638. Positioning bushes K1290.Czytaj dalejType Locking Mechanism Mounting Method Overall Length Body Material All Stainless Tip Material Body O.D./Thread M(mm) Stroke S(mm) - - - - Stainless Steel - - - - KonfigurujCena (bez VAT) od:18.19 €Standardowa data wysyłki:4 dni robocze
KIPP
Product description: Cam-action indexing plungers are used where any change in locking position due to lateral forces should be prevented. Turning the grip through 180° retracts the indexing pin, enabling a change in the indexed position. The notch ensures that the grip remains in this position and the indexing pin remains retracted. Material: Threaded sleeve and grip 1.4308. Indexing pin 1.4305. Spring 1.4310. Version: Threaded sleeve, spring and grip bright. Indexing pin ground and bright. Application: The closed construction of these indexing plungers with internal guide permits them to be installed in places subject to heavy soiling e.g. dust and airborne sparks. Advantages: - The indexing pin is retracted by rotating the grip through 180°. - The closed design prevents dirt from entering the threaded sleeve. - The hexagon on the sleeve facilitates easy installation of the indexing plunger. On request: Special versions. Accessory: Mounting bracket K0638. Positioning bushes K1290.Czytaj dalejType Locking Mechanism Mounting Method Overall Length Body Material All Stainless Tip Material Body O.D./Thread M(mm) Stroke S(mm) - - - - Stainless Steel - - - - KonfigurujCena (bez VAT) od:18.61 €Standardowa data wysyłki:4 dni robocze
KIPP
Product description: Cam-action indexing plungers are used where any change in locking position due to lateral forces should be prevented. Turning the grip through 180° retracts the indexing pin, enabling a change in the indexed position. The notch ensures that the grip remains in this position and the indexing pin remains retracted. Material: Threaded sleeve and grip 1.4308. Indexing pin 1.4305. Spring 1.4310. Grip cap thermoplastic PA. Version: Threaded sleeve, spring and grip bright. Indexing pin ground and bright. Grip cap in various colours: - black grey RAL 7021. - pure orange RAL 2004. - colza yellow RAL 1021. - traffic red RAL 3020. - signal green RAL 6032. - traffic blue RAL 5017. - light grey RAL 7035. Application: The closed construction of these indexing plungers with internal guide permits them to be installed in places subject to heavy soiling e.g. dust and airborne sparks. Advantages: - The indexing pin is retracted by rotating the grip through 180°. - The closed design prevents dirt from entering the threaded sleeve. - The hexagon on the sleeve facilitates easy installation of the indexing plunger. On request: Special versions. Accessory: Mounting bracket K0638. Positioning bushes K1290.Czytaj dalejType Locking Mechanism Mounting Method Overall Length Body Material All Stainless Tip Material Body O.D./Thread M(mm) Stroke S(mm) - - - - Stainless Steel - - - - KonfigurujCena (bez VAT) od:15.81 €Standardowa data wysyłki:4 dni robocze
KIPP
Product description: Cam-action indexing plungers are used where any change in locking position due to lateral forces should be prevented. Turning the grip through 180° retracts the indexing pin, enabling a change in the indexed position. The notch ensures that the grip remains in this position and the indexing pin remains retracted. Material: Threaded sleeve and grip 1.4308. Indexing pin 1.4305. Spring 1.4310. Grip cap thermoplastic PA. Version: Threaded sleeve, spring and grip bright. Indexing pin ground and bright. Grip cap in various colours: - black grey RAL 7021. - pure orange RAL 2004. - colza yellow RAL 1021. - traffic red RAL 3020. - signal green RAL 6032. - traffic blue RAL 5017. - light grey RAL 7035. Application: The closed construction of these indexing plungers with internal guide permits them to be installed in places subject to heavy soiling e.g. dust and airborne sparks. Advantages: - The indexing pin is retracted by rotating the grip through 180°. - The closed design prevents dirt from entering the threaded sleeve. - The hexagon on the sleeve facilitates easy installation of the indexing plunger. On request: Special versions. Accessory: Mounting bracket K0638. Positioning bushes K1290.Czytaj dalejType Locking Mechanism Mounting Method Overall Length Body Material All Stainless Tip Material Body O.D./Thread M(mm) Stroke S(mm) - - - - Stainless Steel - - - - KonfigurujCena (bez VAT) od:16.17 €Standardowa data wysyłki:4 dni robocze
KIPP
Product description: Cam-action indexing plungers are used where any change in locking position due to lateral forces should be prevented. Turning the grip through 180° retracts the indexing pin, enabling a change in the indexed position. The notch ensures that the grip remains in this position and the indexing pin remains retracted. Material: Grip 1.4308 Threaded sleeve and indexing pin 1.4305 Spring 1.4310 Grip cap thermoplastic PA. Thread lock blue polyamide Version: Threaded sleeve, spring and grip bright. Indexing pin ground and bright. Grip cap in various colours: - black grey RAL 7021. - pure orange RAL 2004. - colza yellow RAL 1021. - traffic red RAL 3020. - signal green RAL 6032. - traffic blue RAL 5017. - light grey RAL 7035. Advantages: Turning the grip through 180° retracts the pin. Optionally available with coloured plastic grip caps. Sleeves with a hexagon serve as assembly aids. On request: Special versions. Accessory: Mounting bracket K0638. Positioning bushes K1290.Czytaj dalejType Locking Mechanism Mounting Method Overall Length Body Material All Stainless Tip Material Body O.D./Thread M(mm) Stroke S(mm) - - - - Stainless Steel - - - - KonfigurujCena (bez VAT) od:19.11 €Standardowa data wysyłki:4 dni robocze
KIPP
Product description: Cam-action indexing plungers are used where any change in locking position due to lateral forces should be prevented. Turning the grip through 180° retracts the indexing pin, enabling a change in the indexed position. The notch ensures that the grip remains in this position and the indexing pin remains retracted. Material: Grip 1.4308. Threaded sleeve and indexing pin 1.4305. Spring 1.4310. Grip cap thermoplastic PA. Thread lock blue polyamide. Version: Threaded sleeve, spring and grip bright. Indexing pin ground and bright. Grip cap in various colours: - black grey RAL 7021. - pure orange RAL 2004. - colza yellow RAL 1021. - traffic red RAL 3020. - signal green RAL 6032. - traffic blue RAL 5017. - light grey RAL 7035. Advantages: Turning the grip through 180° retracts the pin. Optionally available with coloured plastic grip caps. Sleeves with a hexagon serve as assembly aids. On request: Special versions. Accessory: Mounting bracket K0638. Positioning bushes K1290.Czytaj dalejType Locking Mechanism Mounting Method Overall Length Body Material All Stainless Tip Material Body O.D./Thread M(mm) Stroke S(mm) - - - - Stainless Steel - - - - KonfigurujCena (bez VAT) od:18.33 €Standardowa data wysyłki:4 dni robocze
KIPP
Indexing plunger, steel or stainless steel short version with plastic cam lever (K2109 A)
Product description: Indexing plungers are used where it is necessary to prevent changes of position due to lateral forces. A new locking position can be set only after the plunger has been manually disengaged. With this indexing plunger, a cam lever is used to retract the pin. The indexing plunger remains unlocked as long as the handle is positioned over the dead-centre of the cam. The ergonomic cam lever enables light handling with low effort. Material: Steel version: Grub screw and indexing pin steel. Stainless steel version: Threaded sleeve 1.4305. Indexing pin 1.4305. Handle fibreglass reinforced thermoplastic PPA (high temperature resistant). Version: Steel version: Threaded sleeve, black oxidised. Indexing pin hardened, ground, and black oxidised. Stainless steel version: Threaded sleeve, bright. Indexing pin ground and left bright. Grip black or traffic red RAL3020. Temperature range: Permanent operating temperature acc. to IEC 216 max. 160°C. Short-term operating temperature max. 250°C. Advantages: Fast and simple to use. Suitable for high-temperature applications. With integrated detent. Short version. Ideal for where space is restricted. Accessory: Spacer rings K0665. Positioning bushes for indexing plunger K1290.Czytaj dalejType Locking Mechanism Mounting Method Overall Length Body Material All Stainless Tip Material Body O.D./Thread M(mm) Stroke S(mm) - - - - Stainless Steel - - - 5 ～ 10 KonfigurujCena (bez VAT) od:16.80 €Standardowa data wysyłki:4 dni robocze
KIPP
Product description: Indexing plungers are used where it is necessary to prevent changes of position due to lateral forces. A new locking position can be set only after the plunger has been manually disengaged. With this indexing plunger a cam lever is used to retract the pin. The indexing plunger remains unlocked as long as the handle is positioned over the dead-centre of the cam. The ergonomic cam lever enables light handling with low effort. Material: Steel version: Grub screw and indexing pin steel. Stainless steel version: Threaded sleeve 1.4305. Indexing pin 1.4305. Handle fibreglass reinforced thermoplastic PPA (high temperature resistant). Version: Steel version: Threaded sleeve, black oxidised. Indexing pin hardened, ground and black oxidised. Stainless steel version: Threaded sleeve, bright. Indexing pin ground and left bright. Grip black or traffic red RAL3020. Temperature range: Permanent operating temperature acc. to IEC 216 max. 160°C. Short-term operating temperature max. 250°C. Advantages: Fast and simple to use. Suitable for high temperature applications. With integrated detent. Short version. Ideal for where space is restricted. Accessory: Spacer rings K0665. Positioning bushes for indexing plunger K1290.Czytaj dalejType Locking Mechanism Mounting Method Overall Length Body Material All Stainless Tip Material Body O.D./Thread M(mm) Stroke S(mm) - - - - Stainless Steel - - - 5 ～ 10 KonfigurujCena (bez VAT) od:17.79 €Standardowa data wysyłki:4 dni robocze
