TAKIGEN For Sealable Type（Page 2）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
- Promotional pricing
Cattle Type Planar Handle A-111
TAKIGEN
[Features]
· Ideal for doors which are required to be airtight.
· Waterproof type (O ring used).
· Adjustable screw allows fine adjustment of grip.
· Excellent corrosion resistance.
Easy installation- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 46.03 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Cattle Type Planar Handle A-222
TAKIGEN
[Features]
· Ideal for doors required to be airtight.
· Waterproof type (O ring used).
· Fine adjustment of grip position is possible by adjusting the screw.
· Excellent corrosion resistance.
· Easy installation.
· Coin lock type is also available. (A-222-2)- 2D / 3D CAD data available
Starting from∗ ： 80.44 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Side Lift Type with Face and Extension Bolt A-328
TAKIGEN
[Features]
· Easy to install surface attachment type.
· Maintenance is very easy compared with digging type.
· Strong seal with upper and lower rods.
· It is thin with a height of about 45 mm from the mounting surface.
· For left or right opening use- 2D / 3D CAD data available
Starting from∗ ： 75.37 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Stainless Steel L Type Inner Handle A-1394-H
TAKIGEN
[Features] Ambidextrous. [Features] as an inside handle.- 2D / 3D CAD data available
Starting from∗ ： 121.97 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Stainless Steel Corner Handle FA-1709
TAKIGEN
[Features]
· The connecting arm ensures a simple, one touch, balanced design in which one must only tug slightly.
· Compact design with small mounting space.
· Excellent salt and acid resistance, ideal for harsh environmental conditions.
· For both left hand and right hand use.
· Can be locked with a padlock.
· Automatic closing can be done in combination with a raised hinge- 2D / 3D CAD data available
Starting from∗ ： 80.44 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Stainless Steel Corner Handle FA-1726
TAKIGEN
[Features]
· One touch system, which you open by gently pulling the handle, and lock by just pushing the door.
· Compact design with small mounting space.
· Excellent salt and acid resistance, ideal for harsh environmental conditions.
· For both left hand and right hand use.
· Can be locked with a padlock.
· Automatic closing can be done in combination with a raised hinge- 2D / 3D CAD data available
Starting from∗ ： 71.74 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 273.74 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
- Promotional pricing
Container Handle FA-810
TAKIGEN
[Features]
· Dual shared type- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 76.10 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Stainless Steel Hatch Lock A-1288
TAKIGEN
[Features]
· Made of stainless steel, with excellent corrosion resistance.
· The stopper lifts vertically by rotation of the handle and seals the door.
· It is a waterproof sealed type.
· Waterproof standard IPX3 equivalent- 2D / 3D CAD data available
Starting from∗ ： 213.04 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
- Promotional pricing
Seal Handle with Stainless Steel Lock FA-1925
TAKIGEN
[Features]
· Handle with locking mechanism that will not open with vibration, impact, etc.
· It is a very low sealing handle with a body height of 25.5 mm.
· The key pin and padlock (C-555) can be used together.
· It catches smoothly on the roller of the plate- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 76.65 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Seal Handle with Stainless Steel Lock FA-1926
TAKIGEN
[Features]
· It is a handle with a locking mechanism that will not open from vibration, shock, etc.
· Key pin of ø6 is attached.
· Heads of padlocks (C-555) Can be used together.
· Rigid structure- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 102.34 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Stainless Steel for Small Handle FA-1727S
TAKIGEN
The height can be adjusted with the plate screws.- 2D / 3D CAD data available
Starting from∗ ： 76.10 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 105.77 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 104.76 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Small Stainless Steel Handle for Sealing FA-1727
TAKIGEN
[Features]
· Made of stainless steel, with excellent corrosion resistance.
· It has a compact, yet strong structure, and also supports opening and closing of doors in intense situations.
· It is easy to use, functional and has a beautiful design.
· It features one-touch opening and closing- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 104.94 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Flat Lift Handle A-234
TAKIGEN
[Features]
· This is a thin type with a protrusion of 4 mm and a depth of 25 mm from the panel mounting surface.
· You can feel a click when you pull up and rotate the handle so you can perform reliable operation.
· The stopper is lifted 3 mm by storing the handle.
· You can get sealing effects.
· The special locking mechanism can eliminate the conventional anxiety factors (rattling of the stopper, vibration of the rod and the rod falling from its own weight), ensuring secure locking.
· For opening to the right- 2D / 3D CAD data available
Starting from∗ ： 65.23 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Flat Waterproof Lift Handle A-212
TAKIGEN
[Features]
· The stopper is lifted 3 to 5 mm by storing handle.
· You can get sealing effects.
· This is a simple structure in which you can lift the handle with your fingers.
· Waterproof type (using O ring and sheet packing).
· For both left hand and right hand use- 2D / 3D CAD data available
Starting from∗ ： 34.81 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Latch Handle FA-680
TAKIGEN
[Features]
· Two stage opening and closing is possible in combination with the double latch lock C-628, which is a safety feature to release hot air and steam such as with an oven.
· In combination with the latch lock, it can be opened and closed with one touch of the upper and lower two points of tightening.
· The large handle made of resin provides less heat conduction.
· It is an elegant, rounded design- 2D / 3D CAD data available
Starting from∗ ： 84.78 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Lift Handle A-201-A
TAKIGEN
[Features]
· Handle shape that is easy to operate, the handle tightens the door.
· The stopper can be adjusted within the range of 8 mm (A-201-A) A-1/A-2/A-3 Each stopper is compatible and can be attached to any handle.
· A-1 Please attach the stopper to use it.
· The stopper can be installed in 90° increments.
· For both left hand and right hand use.- 2D / 3D CAD data available
Starting from∗ ： 23.95 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Lift Handle A-202
TAKIGEN
[Features]
· Seal the door by pushing down on the handle.
· When pulling up on the handle, the clasp retracts and it can be opened and closed by rotating the handle.
· Left and right combination- 2D / 3D CAD data available
Starting from∗ ： 15.98 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Lift Handle AP-201
TAKIGEN
[Features]
· Handle shape that is easy to operate.
· Tighten the door by pushing down on the handle.
· The stopper can be installed in 90° increments.
· Left and right dual use type.- 2D / 3D CAD data available
Starting from∗ ： 17.43 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Lever Handle FA-601-F-H
TAKIGEN
[Features]
· Even when locked, there is a special lever handle FA-601-F-H that's operation is a safety mechanism that can be open the door(FA-601-F-H sold separately).
· For both left hand and right hand use- 2D / 3D CAD data available
Starting from∗ ： 73.19 € Min. Shipping Days ： 56 Days *Unit price with basic configuration
-
- Promotional pricing
Roller Tightening Handle FA-840
TAKIGEN
[Features]
· Close even a large door securely.
· The mounting position of the plates (FA-840S-1) can be fine-tuned.
· The opening operation is smooth with a built-in spring in the handle.
· For right or left (they both open to the left in this figure).
· The plate is a left-and-right type- 2D / 3D CAD data available
Starting from∗ ： 17.88 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Lock Handle FA-630
TAKIGEN
[Features]
· The rod moves up and down 23 mm vertically and closes the door firmly.
· You can identify whether it is locked (green) or unlocked (red).
· The direction of handle operation has been clarified with arrows.
· The rod mounting position can be adjusted.
· For right rotation or for left rotation (the photograph in this figure shows right rotation)- 2D / 3D CAD data available
Starting from∗ ： 99.27 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Seal with Lock FA-926
TAKIGEN
[Features]
· It is a handle with a locking mechanism that will not open from vibration, shock, etc.
· Key pin of ø6 is attached.
· Heads of padlocks (C-555) Can be used together.
· Rigid structure- 2D CAD data available
Starting from∗ ： 103.61 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Seal with Lock FA-927
TAKIGEN
[Features]
· It is a handle with a locking mechanism that does not open from vibration, impact, etc.
· Can be used together with Key pin and padlock, Chief padlock (C-555).
· Rigid structure- 2D / 3D CAD data available
Starting from∗ ： 57.98 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
One Touch Corner Handle FA-935
TAKIGEN
[Features]
· When you pull the button, the lock is released and you can open it.
· The plates position is adjustable during installation and the tightening margin can be adjusted- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 73.81 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Small Extended Bolt Lock A-363
TAKIGEN
[Features]
· Low cost extended bolt lock.
· Since they are front faced, installation and maintenance are easy.
· Waterproof for right/left- 2D / 3D CAD data available
Starting from∗ ： 54.37 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Small Handle Plate FA-727S
TAKIGEN
The height can be adjusted with the plate screws.- 2D / 3D CAD data available
Starting from∗ ： 13.38 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Large Faceted Lock Handle A-388N
TAKIGEN
[Features]
· Please apply high-performance lubricant C-985 to ensure long-term use.
· We recommend the application of a "Loosening prevention agent" on the screws for the stopper plate of this product in order to prevent looseness.
· Please be aware that rotating the key more than necessary may damage the lock/key tip- 2D / 3D CAD data available
Starting from∗ ： 106.78 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Canopy Sealing Handle FA-908
TAKIGEN
[Features]
· It is the best front facing handles for canopy type sealing doors.
· A high Security lock TAK70 is standard equipment.
· You can also rearrange it into TAK60/TAK80.
· Extruded material is used for the grip part, and elongated items can also be produced (standard is 230 mm)- 2D / 3D CAD data available
Starting from∗ ： 99.71 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Two-Stage Corner Handle FA-635
TAKIGEN
[Features]
· Once the lever is pulled, the door opens about 12 mm and then fully opens by pulling the lever again.
· It is ideal for when you need to escape steam.
· Heat resistant type with vinyl coating on the hand grip (up to 100° C).
· It is possible to finely adjust the mounting position.
· For both left hand and right hand use- 2D CAD data available
Starting from∗ ： 142.20 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Equipped with an Escape Device Plate FA-702S-4
TAKIGEN
[Features]
· A double safety escape mechanism that adopts a safety device, not only for the handle, but also for the plate to prevent trapping accidents.
· When you push the internal safety push rod strongly in case of emergency, the plate separates from the latch and the door opens when you push on it- 2D CAD data available
Starting from∗ ： 73.19 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Flat Lift Handle A-205
TAKIGEN
[Features]
· Seal the door by pushing down on the handle.
· When pulling up the handle, the clasp retracts about 3 mm, and it can be opened and closed using the handle.
· Left and right dual use type.
· Improved waterproofness. (Packing used in and outside)- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 22.97 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Flat Lift Handle A-214
TAKIGEN
[Features]
· Seal the door by pushing down on the handle.
· When pulling up the handle, the clasp retracts about 3 mm, and it can be opened and closed using the handle.
· Left and right dual use type.
· Improved waterproofing (used for packing inside and outside)- 3D CAD data available
Starting from∗ ： 62.32 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Sealed Lift Handle Latch Receiving FA-681-S
TAKIGEN
[Features]
· FA-681-1 / FA-681-T-1 You can close it with a single touch by using it in combination with a handle.
· FA-681-S-1 is an indented type.
· The latch is inconspicuous, and adjustment of up to 6 mm is possible.
· FA-681-S-2 is a front facing type.
· Easy installation and maintenance, adjustment of up to 10 mm is possible- 2D CAD data available
Starting from∗ ： 28.29 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Sealed Folding Flat Handle A-213N
TAKIGEN
[Features]
· The stopper is lifted 3 mm by storing the handle.
· A strong shielding effect is achieved.
· The flat folding handle is compatible with the new A-213 design where the key slot is at the center.
· Safety structure that does not open the closed door, even when a violent vibration / shock is applied.
· Left and right combination- 2D / 3D CAD data available
Starting from∗ ： 64.50 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Closed Adjustable Handle A-309
TAKIGEN
[Features]
· Flat design without protrusions.
· One touch open with push button.
· The airtightness of the door can be finely adjusted with the adjusting screw.
· Waterproof type (O ring, packing is used).
· Lockable with reversible key with dust proof shutter- 2D / 3D CAD data available
Starting from∗ ： 46.41 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Sealed Cover Lock A-838
TAKIGEN
[Features]
· Increases the shielding ability of the hook part, and minimizes sound leakage.
· Flat type with few protrusions from the door surface.
· You can tighten three points in combination with the interlocking unit.
· A lock with a dust-proof shutter comes standard.
· You can use it as an alternative to A-858 which is a cover lock for construction machine that is a product discontinued in the catalog- 2D / 3D CAD data available
Starting from∗ ： 13.82 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Sealed Small Cover Lock A-839
TAKIGEN
[Features]
· Improved the shielding property of the hook.
· Keeps sound leakage to a minimum.
· Flat type with few protrusions from the door surface.
· Dust proof shutter lock included as standard- Volume Discount
- 2D / 3D CAD data available
Starting from∗ ： 32.63 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Sealing Corner Handle FA-611
TAKIGEN
[Features]
· It is a side-mounted type sealed handle.
· The semicircular claw meshes with the roller seat to draw-in and tightly close the door.
· the roller seat can be adjusted 2 mm forward and backward from the reference position for tightening.
· In addition to the included key, it is possible to lock with a padlock (recommended padlock C-551).
· Left and right combination- 2D / 3D CAD data available
Starting from∗ ： 13.82 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Sealing Corner Handle FA-614
TAKIGEN
[Features]
· It is the most common, economic type.
· The mounting position and tightening margin of the plate can be finely adjusted.
· Can be used in high temperatures such as with an oven.
· Left and right combination- 2D / 3D CAD data available
Starting from∗ ： 71.74 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Sealing Corner Handle FA-615
TAKIGEN
[Features]
· Heat-resistant type (up to 100°C) with a vinyl coating on the hand grip.
· Can be used in high temperatures, such as with an oven- 2D / 3D CAD data available
Starting from∗ ： 122.44 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing
Sealing Corner Handle FA-618
TAKIGEN
Lockable with padlock. Tightening margin adjustment is possible for the plate. Left and right dual use type.- Volume Discount
- 2D CAD data available
Starting from∗ ： 56.50 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
Starting from∗ ： 81.89 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days ： |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN |
| Product Series | |||||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Starting from∗ | 46.03 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 80.44 € *Unit price with basic configuration | 75.37 € *Unit price with basic configuration | 121.97 € *Unit price with basic configuration | 80.44 € *Unit price with basic configuration | 71.74 € *Unit price with basic configuration | 273.74 € *Unit price with basic configuration | 76.10 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 213.04 € *Unit price with basic configuration | 76.65 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 102.34 € *Unit price with basic configuration Volume Discount | 76.10 € *Unit price with basic configuration | 105.77 € *Unit price with basic configuration | 104.76 € *Unit price with basic configuration | 104.94 € *Unit price with basic configuration Volume Discount | 65.23 € *Unit price with basic configuration | 34.81 € *Unit price with basic configuration | 84.78 € Special price *Unit price with basic configuration Promotional pricing | 23.95 € *Unit price with basic configuration | 15.98 € *Unit price with basic configuration | 17.43 € *Unit price with basic configuration | 73.19 € *Unit price with basic configuration | 17.88 € Special price *Unit price with basic configuration Promotional pricing | 99.27 € *Unit price with basic configuration | 103.61 € *Unit price with basic configuration | 57.98 € *Unit price with basic configuration | 73.81 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 54.37 € *Unit price with basic configuration | 13.38 € *Unit price with basic configuration | 106.78 € *Unit price with basic configuration | 99.71 € *Unit price with basic configuration | 142.20 € *Unit price with basic configuration | 73.19 € *Unit price with basic configuration | 22.97 € *Unit price with basic configuration Volume Discount | 62.32 € *Unit price with basic configuration | 28.29 € *Unit price with basic configuration | 64.50 € *Unit price with basic configuration | 46.41 € *Unit price with basic configuration | 13.82 € *Unit price with basic configuration | 32.63 € *Unit price with basic configuration Volume Discount | 13.82 € *Unit price with basic configuration | 71.74 € *Unit price with basic configuration | 122.44 € *Unit price with basic configuration | 56.50 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 81.89 € *Unit price with basic configuration |
| Min. Shipping Days ： | Same day | 10 Days | 10 Days | 10 Days | 6 Days | 6 Days | 10 Days | Same day | 10 Days | Same day | Same day | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 10 Days | 56 Days | Same day | 6 Days | 10 Days | 6 Days | Same day | 10 Days | 6 Days | 6 Days | 10 Days | 10 Days | 6 Days | Same day | 6 Days | 10 Days | 6 Days | 6 Days | 10 Days | 10 Days | 10 Days | 6 Days | 6 Days | Same day | 6 Days |
Loading...
Examples how you can use these components Test
Metody płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.