Chamfer, V-Grooves (Application: Chamfering/Horizontal)

• 

  SANDVIK

  CoroMill Plura - General Purpose Chamfering End Mill, Cylindrical Shank / Weldon Shank

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	90°	8 ～ 12	General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Single blade	N/A	Carbide	Available	Other

  Cena (bez VAT) od:

  116.87 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • Volume Discount
  • TS
  • General Steel
  • 2 Flutes

  MISUMI

  TS coated carbide chamfer, V grooving end mill, 2-flute

  [Features] -Ideal for chamfers and V-grooves-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application methods, performance range, prices, delivery times, etc.

  Czytaj dalej

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	60 ～ 120	3 ～ 16	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	N/A	Carbide	Available	TS

  Cena (bez VAT) od:

  68.82 €

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  • Volume Discount
  • Non-Coated
  • Aluminum
  • 2 Flutes

  MISUMI

  Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral

  Capable of everything from positioning to chamfering in a single shot

  Czytaj dalej

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	90	3 ～ 12	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Single blade	N/A	Carbide	N/A	-

  Cena (bez VAT) od:

  40.79 €

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  • Volume Discount
  • TiCN
  • 2 Flutes
  • S (Short)

  MISUMI

  TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short

  The chamfer angle can be selected from 60, 90 and 120°according to the machining style

  Czytaj dalej

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	60 ～ 120	10 ～ 25	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	Powder high-speed steel	Available	-

  Cena (bez VAT) od:

  55.66 €

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  • Volume Discount

  MISUMI

  XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type

  [Features]・The popular high hardness steel chamfer end mill is even more affordable.・Ideal for chamfering high hardness steel up to 65 HRC. (V-groove machining is not possible because there is no cutting edge at the tip)・High-efficiency machining is possible by adopting a 6-flute shape.・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.・The finish of the surface roughness of the workpiece after machining is very good.

  Czytaj dalej

  CAD:

  2D

  /3D

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	-	-	General Steel[○] / Quenched and tempered steel[○] / High Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[◎]	Single blade	N/A	Carbide	Available	TS

  Cena (bez VAT) od:

  42.86 €

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  OKAZAKI SEIKO

  SVMA Chamfering Mill, OK Coated

  In addition to hole chamfering, it can be used for transverse feed cutting such as V-groove machining and C-surface machining.

  Czytaj dalej

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	90 ～ 120	3 ～ 20	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	Available	Carbide	Available	TiAlN

  Cena (bez VAT) od:

  100.48 €

  Standardowa data wysyłki:

  8 dni robocze

  Konfiguruj
• 

  • Volume Discount
  • TS
  • General Steel
  • 2 Flutes

  MISUMI

  TS coated carbide chamfering end mill, 2-flute / 15° spiral

  [Features] -The hard-to-machine flute tip and the shape that facilitates chip evacuation allow machining from positioning ( = centering) to chamfering with a single tool-The coating has high oxidation resistance and high hardness and achieves long tool life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

  Czytaj dalej

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	90	3 ～ 12	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	N/A	Carbide	Available	TS

  Cena (bez VAT) od:

  40.79 €

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  • Volume Discount
  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  MISUMI

  TS coated carbide chamfering end mill, 2-flute / short model

  [Features] -Ideal for chamfering. Can also be used as a deburring tool-Since it has circumferential grooves, it is possible to perform bevel, contour and oblique cutting-Since the circumferential grooves have a bevel angle, it is possible to machine as shown in the figure above-It has a coating with high oxidation resistance and high hardness, and achieves a long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for how to use the product, its performance, etc.

  Czytaj dalej

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	60 ～ 120	3 ～ 12	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	Carbide	Available	TS

  Cena (bez VAT) od:

  38.81 €

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  • Volume Discount
  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  MISUMI

  TS coated carbide chamfering end mill, 3-flute / short model

  [Features] -Ideal for chamfering (V-groove is not possible as the tip has no cutting groove).-Peripheral grooves allow bevel, contour and spiral cutting-The 3-groove shape allows feed rate improvement to the 1st step. The 3-flute shape enables up to 1.5 times the feed rate compared to the 2-flute type-With helix angle on peripheral flutes-Can also be used as a deburring tool-It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.

  Czytaj dalej

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	90	3 ～ 12	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	Carbide	Available	TS

  Cena (bez VAT) od:

  46.59 €

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  • Volume Discount
  • Non-Coated
  • Aluminum
  • 2 Flutes

  MISUMI

  Carbide Chamfering End Mill for Aluminum Machining, 2-Flute

  The sharp helix blade achieves the clean machined surface with less burr

  Czytaj dalej

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	90	3 ～ 12	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Single blade	N/A	Carbide	N/A	-

  Cena (bez VAT) od:

  75.63 €

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  • Non-Coated
  • 2 Flutes
  • S (Short)

  MISUMI

  High-Speed Steel Chamfering End Mill, 2-Flute / Short

  Chamfering end mill with the angle that can be freely selected in 1° increments

  Czytaj dalej

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	60 ～ 160	10 ～ 25	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	Cobalt HSS	Available / N/A	TiCN

  Standardowa data wysyłki:

  7 dni robocze

  Konfiguruj
• 

  • Volume Discount

  MISUMI

  XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type

  [Features]・Popular 3-flute type for helix angle chambering with high feed rate.・Ideal for chamfering.(V-groove machining is not possible because there is no cutting edge at the tip)・Since it has an outer peripheral flute, it can perform inclined contours and helical cutting.・With the 3-flute shape, the feed can be increased up to 1.5 times that of the 2-flute type.・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible.・It can also be used as a deburring tool.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.

  Czytaj dalej

  CAD:

  2D

  /3D

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	-	-	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	Carbide	Available	AlCrN

  Cena (bez VAT) od:

  41.90 €

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  • Volume Discount

  OSG

  2-Flute Spiral Chamfering Cutter (for Steel / Aluminum Alloy) CA-SCC

  By adopting of sharp high helix, clean working surface with less burr can be obtained.

  Czytaj dalej

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	90	0.8 ～ 1	Aluminum[◎] / Copper[◎] / Resin[○]	Single blade	N/A	Carbide	N/A	Non-Coated

  Cena (bez VAT) od:

  81.19 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • Volume Discount

  OSG

  3-Flute, Chamfering Cutter (Positive Type) HSCT-P

  End mill for positive chamfering. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.

  Czytaj dalej

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	90	1 ～ 2	General Steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎]	Single blade	N/A	Carbide	N/A	Non-Coated

  Cena (bez VAT) od:

  73.51 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • Volume Discount
  • TS
  • General Steel
  • 2 Flutes

  MISUMI

  TS coated carbide chamfer, V grooving end mill, 2-flute / long shank model

  Ideal for the Deep Chamfering of Workpieces

  Czytaj dalej

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	90	3 ～ 12	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	Carbide	Available	TS

  Cena (bez VAT) od:

  48.89 €

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  • Volume Discount
  • TS
  • SUS
  • 2 Flutes

  MISUMI

  TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute / No Side Blade

  The helix flute suppresses the occurrence of burrs in chamfering difficult-to-cut SUS, etc.

  Czytaj dalej

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	90	3 ～ 12	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]	Single blade	N/A	Carbide	Available	TS

  Cena (bez VAT) od:

  77.83 €

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  • Volume Discount

  MISUMI

  XAL Series Carbide Chamfer End Mill, 2-Flute / Short Type

  [Features]・Popular chamfering product with helix angle.・Since it has a peripheral flute, it can be used for tilting, contouring and helical cutting.・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible. It can also be used as a deburring tool.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.

  Czytaj dalej

  CAD:

  2D

  /3D

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	-	-	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	Carbide	Available	AlCrN

  Cena (bez VAT) od:

  36.91 €

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  • Volume Discount

  MISUMI

  XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle

  [Features]・Machining from positioning to chamfering with a single tool.

  Czytaj dalej

  CAD:

  2D

  /3D

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	-	-	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	N/A	Carbide	Available	AlCrN

  Cena (bez VAT) od:

  41.67 €

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  • Volume Discount

  MISUMI

  XAL Series Carbide Chamfer End Mill 2-Flute

  [Features]・Recommended for chamfering general steel.・Ideal for chamfering and V-groove machining.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.

  Czytaj dalej

  CAD:

  2D

  /3D

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	-	-	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	N/A	Carbide	Available	AlCrN

  Cena (bez VAT) od:

  32.62 €

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  • Volume Discount

  MISUMI

  XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type

  [Features]・Recommended for deep section chamfering of general steel.・Ideal for chamfering and V-groove machining.・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.・The long type is ideal for deep cavity milling.

  Czytaj dalej

  CAD:

  2D

  /3D

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	-	-	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	Available	Carbide	Available	AlCrN

  Cena (bez VAT) od:

  43.97 €

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  • Volume Discount

  OSG

  2-Flute Spiral Chamfering Cutter FX-SCC

  By adopting of sharp high helix, clean working surface with less burr can be obtained.

  Czytaj dalej

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	90	0.8 ～ 1	Quenched and tempered steel[◎] / High Hardness Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○]	Single blade	N/A	Carbide	Available	TiAlN

  Cena (bez VAT) od:

  88.29 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  OSG

  2-Flute Long Shank Spiral Chamfering Cutter FX-LS-SCC

  Long shank type suited for working deep section. Does not generate chatter even with large extruding amounts due to use of twisted blade.

  Czytaj dalej

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	90	0.8 ～ 1	Quenched and tempered steel[◎] / High Hardness Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○]	Single blade	N/A	Carbide	Available	TiAlN

  Cena (bez VAT) od:

  84.50 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • Volume Discount

  OSG

  2-Flute Long Shank Spiral Chamfering Cutter (for Steel / Aluminum) CA-LS-SCC

  Long shank type suited for working deep section. Does not generate chatter even with large extruding amounts due to use of twisted blade.

  Czytaj dalej

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	90	0.8 ～ 1	Aluminum[◎] / Copper[◎] / Resin[○]	Single blade	N/A	Carbide	N/A	Non-Coated

  Cena (bez VAT) od:

  87.63 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • Volume Discount

  OSG

  3-Flute, Chamfering Cutter (Negative Type) HSCT-N

  End mill for negative chamfering. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.

  Czytaj dalej

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	90	1 ～ 2	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	Single blade	N/A	Carbide	N/A	Non-Coated

  Cena (bez VAT) od:

  73.17 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • Volume Discount

  OSG

  3-Flute Long Shank Chamfering Cutter (Negative Type) LS-HSCT-N

  End mill for negative chamfering, long shank type. It suppresses chatter during machining and has good chip evacuation for a nice surface finish.

  Czytaj dalej

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	90	1 ～ 2	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]	Single blade	N/A	Carbide	N/A	Non-Coated

  Cena (bez VAT) od:

  78.36 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • Volume Discount

  OSG

  3-Flute Long Shank Chamfering Cutter (Positive Type) LS-HSCT-P

  Positive chamfer cutter with long shank. It suppresses chatter during machining and has good chip evacuation for a beautiful finished surface.

  Czytaj dalej

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	90	1 ～ 2	General Steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎]	Single blade	N/A	Carbide	N/A	Non-Coated

  Cena (bez VAT) od:

  78.36 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  UNION TOOL

  Spiral Chamfering Cutter for SV Chamfering Process

  [Features]· Carbide spiral chamfering cutter· Half Taper Angle of 45°· The external blade is a torsion type that limits the occurrence of burrs when compared with the straight blade type.

  Czytaj dalej

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	90	0.8 ～ 1	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] / Graphite[○] / Resin[○]	Single blade	N/A	Carbide	N/A	-

  Cena (bez VAT) od:

  135.77 €

  Standardowa data wysyłki:

  7 dni robocze

  Konfiguruj
• 

  • Volume Discount

  OSG

  High Speed Chamfering Series, V-Coated XPM 2-Flute Chamfering Cutters

  By adopting of sharp high helix, clean working surface with less burr can be obtained.

  Czytaj dalej

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	-	-	General Steel[◎] / Quenched and tempered steel[○] / High Hardness Steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	N/A	Powder high-speed steel	Available	TiCN

  Cena (bez VAT) od:

  44.76 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • ZNIŻKA
  • Volume Discount

  FUKUDA

  Chatterless Chamfer Milling Machine

  6-flute blade improves cutting force, fantastic sharpness means zero chatter, horizontal motion during face milling is possible, and the uncomfortable metallic sound during machining is drastically reduced.[Features]· Chamfering.· Drilling machines, milling machines, machining centers.· Horizontal Milling

  Czytaj dalej

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	60 ～ 120	-	General Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○]	Single blade	N/A	Cobalt HSS	N/A	Non-Coated

  Cena (bez VAT) od:

  41.32 €

  Cena specjalna

  Standardowa data wysyłki:

  Towar dostępny w magazynie: 1 dzień roboczy

  Niektóre pozycje mogą zostać wysłane tego samego dnia

  Konfiguruj
• 

  • Volume Discount

  EIKOSHA

  New Chamfering Cutter

  Chamfering, 1-Flute

  Czytaj dalej

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	60	6	General Steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○]	-	-	High-speed steel	-	-

  Cena (bez VAT) od:

  48.99 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  SANKO MFG

  GCCC for Carbide Center Chamfering

  [Features]· Melding the design concepts of endmills and drills, it is available for a wide range of applications.· Double angle adopted for the chamfer part.· Provides a clean finish with fewer burrs.

  Czytaj dalej

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	-	10	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○]	-	Available	Carbide	N/A	Non-Coated

  Cena (bez VAT) od:

  140.94 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  IWATA TOOL

  Toglon Sharp SP 60° Carbide

  Causes fewer burrs and less chattering and provides clean surface roughness. Enables chamfering of multiple diameters with a single unit. Finish is the same quality, brilliant surface roughness.

  Czytaj dalej

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	60	1.2 ～ 16	General Steel[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	N/A	Carbide	N/A	-

  Cena (bez VAT) od:

  100.97 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  IWATA TOOL

  Toglon Sharp SP 60° Carbide DLC Coating

  Causes fewer burrs and less chattering and provides clean surface roughness. Enables chamfering of multiple diameters with a single unit. Finish is the same quality, brilliant surface roughness.

  Czytaj dalej

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	60	2 ～ 16	Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	N/A	Carbide	Available	DLC

  Cena (bez VAT) od:

  122.84 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  IWATA TOOL

  Toglon Sharp SP 90° Carbide

  [Features]· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.· Finish is the same quality, brilliant surface roughness.

  Czytaj dalej

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	90	1.2 ～ 16	General Steel[○] / Aluminum[○] / Copper[○] / Resin[○]	Single blade	N/A	Carbide	N/A	-

  Cena (bez VAT) od:

  87.41 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  IWATA TOOL

  Toglon Sharp SP 90° Carbide DLC Coating

  [Features]· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.· Finish is the same quality, brilliant surface roughness.

  Czytaj dalej

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	90	1.2 ～ 16	Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	N/A	Carbide	Available	DLC

  Cena (bez VAT) od:

  100.97 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  IWATA TOOL

  Toglon Sharp SP 90° Carbide Long Type

  [Features]· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.· Finish is the same quality, brilliant surface roughness.

  Czytaj dalej

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	90	3 ～ 12	General Steel[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	N/A	Carbide	N/A	-

  Cena (bez VAT) od:

  113.83 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  IWATA TOOL

  Toglon Sharp SP 90° Carbide Long Type DLC Coating

  [Features]· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.· Finish is the same quality, brilliant surface roughness.

  Czytaj dalej

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	90	3 ～ 12	Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	Single blade	N/A	Carbide	Available	DLC

  Cena (bez VAT) od:

  133.14 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  IWATA TOOL

  Toglon Sharp SP 60° ALD Coating

  [Features]· HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.

  Czytaj dalej

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	60	0.6 ～ 4	Quenched and tempered steel[○] / High Hardness Steel[○]	Single blade	N/A	Carbide	Available	Other

  Cena (bez VAT) od:

  103.54 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • Volume Discount

  IWATA TOOL

  Toglon Sharp SP 90° ALD Coating

  [Features]· HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.

  Czytaj dalej

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	90	0.6 ～ 4	Quenched and tempered steel[○] / High Hardness Steel[○]	Single blade	N/A	Carbide	Available	Other

  Cena (bez VAT) od:

  103.54 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  IWATA TOOL

  Toglon Miniature Hard SP 90° ALT Coating

  [Features]· HRC40-72 hardened steel can be machined. High torsional shape exhibits performance hitherto unseen with hardened steel, die steel, Kovar, Hastelloy, etc., achieving the best surface roughness with a 3-flute long cutting edge and remarkable life.

  Czytaj dalej

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	90	0.1 ～ 1.5	Quenched and tempered steel[○] / High Hardness Steel[○]	Single blade	N/A	Carbide	Available	ALT

  Cena (bez VAT) od:

  97.11 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  FUJIGEN

  Aluminum Samurai

  [Features]· Dedicated for aluminum. : The blade tip shape is specialized for aluminum machining and provides a clean cut with less burring, reducing the need for burr removal after machining.· Significantly reduces running cost thanks to its high strength and improved abrasion resistance.· Achieves high runout accuracy within 5/1,000 mm.

  Czytaj dalej

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	90	4 ～ 10	Aluminum[○] / Resin[○]	Single blade	N/A	-	N/A	Non-Coated

  Cena (bez VAT) od:

  160.01 €

  Standardowa data wysyłki:

  9 dni robocze

  Konfiguruj
• 

  • Volume Discount

  OKAZAKI SEIKO

  SVM Chamfering Mill, Non-Coated

  In addition to hole chamfering, it can be used for transverse feed cutting such as V-groove machining and C-surface machining.

  Czytaj dalej

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	90 ～ 120	3 ～ 20	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Single blade	Available	Carbide	N/A	Non-Coated

  Cena (bez VAT) od:

  80.16 €

  Standardowa data wysyłki:

  8 dni robocze

  Konfiguruj
• 

  DIJET

  Solid V Point Mill VSE VSESS Type

  It is a tool with excellent abrasion resistance.

  Czytaj dalej

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	60 ～ 90	5 ～ 12	General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Single blade	-	Carbide	N/A	Non-Coated

  Cena (bez VAT) od:

  110.60 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  DIJET

  For Mentatsu Aluminum AL-VME

  A tool with excellent abrasion resistance.Working material, aluminiumSingle-edged bladeTool type, carbideTip angle (θ) 90.

  Czytaj dalej

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	90	4	Aluminum[◎]	Single blade	-	Carbide	N/A	Non-Coated

  Cena (bez VAT) od:

  82.01 €

  Standardowa data wysyłki:

  10 dni robocze

  Konfiguruj
• 

  • ZNIŻKA
  • Volume Discount

  KYOWA SEIKO

  Carbide Chamfering Cutter KMC-2

  [Features] It can be used for chamfering and horizontal machining. [Features] By using carbide materials with high hardness, it can be used for cutting general steel, heat-treated steel, stainless steel, cast iron and aluminium.

  Czytaj dalej

  Application	Tip angle (θ)	Tool Diameter (D)(mm)	work material	Single blade, two blades	Peripheral Blade Y/N	Tool Material Type	Coating Y/N	Coating Type
  Chamfering/Horizontal	90°	0.3 ～ 4	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]	Single blade	-	Carbide	N/A	-

  Cena (bez VAT) od:

  42.95 €

  Cena specjalna

  Standardowa data wysyłki:

  Towar dostępny w magazynie: 1 dzień roboczy

  Niektóre pozycje mogą zostać wysłane tego samego dnia

  Konfiguruj