Rejestracja

Tłumaczymy nasz sklep na język polski!

Wymaga to jednak czasu, ponieważ w ofercie mamy dużo artykułów, a na nasz sklep składa się wiele stron. Chwilowo nasz katalog produktów dostępny będzie w języku angielskim. Dziękujemy za cierpliwość!
Warunki filtrowania

Wyczyść wszystko

  • Stan magazynowy
  • Tool Diameter(mm)
    [1.8–5/0.1mm jedn.]
    [0.3–15.99/0.01mm jedn.]
    [0.3–15.995/0.005mm jedn.]
  • Shank Type
  • work material
  • Groove Length(mm)
    [0.5–48/0.5mm jedn.]
    [3–10/1mm jedn.]
  • Groove Shape
  • Tip diameter
  • Large End Diameter
  • radius R
  • Reamers (Coating Y/N: N/A Strona 2)

    Reamers are a cutting tool used on drilled holes to refine them into the required hole-diameter precision and surface roughness while shaping them into true circles. Reamers are selected according to the precision of the hole as needed. They vary in hardness and size from the ones used to cut holes in parts of aircrafts to those used to manufacture musical instruments. Different reamers are selected based on their applications; hand reamers used for manual operation with handles attached to them, chucking reamers mounted to drill presses or NC machine tools for machining, machine reamers with longer cutter section than that of chucking reamers, taper reamers for finishing tapered drilled holes, bridge reamers used for correcting bolt holes, etc., when there is misalignment in them, and more. Their materials include high-speed steel or coated high-speed steel, carbide or coated carbide; reamer types vary according to the material of the parts for machining, machining method (manual or machine tool) and the cutting fluid types.
    • Carbide Precision Straight Reamer

        MISUMI

        Carbide Precision Straight Reamer

        It is capable of finishing holes with clean surface roughness compared to the normal reamer.
        Czytaj dalej
        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
        0.5 ~ 5.9End Mill ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]3 ~ 10N/AStraightN/A--
        Standardowa data wysyłki:
        8 dni robocze
        Konfiguruj
      • High-Speed Steel High Helical Reamer, Right Blade with 60° Left Spiral, 0.01 mm Unit Designation Model

          MISUMI

          High-Speed Steel High Helical Reamer, Right Blade with 60° Left Spiral, 0.01 mm Unit Designation Model

          [Features] -Standard spiral reamer with right blade and left spiral angle of 60°. Cutting force is reduced by the strong helix angle-Cutting diameter can be selected in units of 0.01 mm.
          Czytaj dalej
          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
          2.01 ~ 13.99Straight ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]13 ~ 45N/ASpiralN/A--
          Cena (bez VAT) od:
          46.37 €
          Standardowa data wysyłki:
          7 dni robocze
          Konfiguruj
        • High-Speed Steel Spiral Machine Reamer

            MISUMI

            High-Speed Steel Spiral Machine Reamer

            Frequently used standard sizes are offered at affordable prices
            Czytaj dalej
            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
            8 ~ 16Taper shankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]33 ~ 52N/ASpiralN/A--
            Cena (bez VAT) od:
            74.22 €
            Standardowa data wysyłki:
            5 dni robocze
            Konfiguruj
          • High-Speed Steel Spiral Hand Reamer

              MISUMI

              High-Speed Steel Spiral Hand Reamer

              Frequently used standard sizes are offered at affordable prices
              Czytaj dalej
              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
              2 ~ 12Straight ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]25 ~ 76N/ASpiralN/A--
              Cena (bez VAT) od:
              31.80 €
              Standardowa data wysyłki:
              5 dni robocze
              Konfiguruj
            • Carbide Step Reamer, Custom Dimensions / Long Shank Type

                MISUMI

                Carbide Step Reamer, Custom Dimensions / Long Shank Type

                [Features]·2-stage hole drilling in 2 processes can be performed with 1 tool while keeping the coaxial·Large diameter can also be specified in addition to tip diameter, stepped length, and chamfer angle·Machining according to the shape of product, such as parts machining, is possible
                Czytaj dalej
                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                -End Mill ShankGeneral Steel[◎] / Aluminum[◎]-N/AStraight---
                Standardowa data wysyłki:
                7 dni robocze
                Konfiguruj
              • Carbide Step Reamer, Custom Dimensions Type

                  MISUMI

                  Carbide Step Reamer, Custom Dimensions Type

                  [Features]·2-stage hole drilling in 2 processes can be performed with 1 tool while keeping the coaxial·Large diameter can also be specified in addition to tip diameter, stepped length, and chamfer angle·Machining according to the shape of product, such as parts machining, is possible
                  Czytaj dalej
                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                  -End Mill ShankGeneral Steel[◎] / Aluminum[◎]-N/AStraight---
                  Standardowa data wysyłki:
                  7 dni robocze
                  Konfiguruj
                • Reamer with Carbide Oil Hole for Stop Holes CSOER

                    EIKOSHA

                    Reamer with Carbide Oil Hole for Stop Holes CSOER

                    Bottom blade with blind hole reamer Oil hole right twist
                    Czytaj dalej
                    Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                    2.95 ~ 16Straight ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[◎] / Heat-resistant alloy[○] / Alloy Steel[◎]16 ~ 30N/ASpiralAvailable--
                    Cena (bez VAT) od:
                    120.41 €
                    Standardowa data wysyłki:
                    6 dni robocze
                    Konfiguruj
                  • Carbide Solid Pivot Reamer CSRR-3
                    • Volume Discount

                    EIKOSHA

                    Carbide Solid Pivot Reamer CSRR-3

                    Small Diameter Use Reamer φ193 Shank
                    Czytaj dalej
                    Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                    0.2 ~ 3Straight ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Heat-resistant alloy[○] / Alloy Steel[◎]3 ~ 25N/AStraightN/A--
                    Cena (bez VAT) od:
                    49.74 €
                    Standardowa data wysyłki:
                    6 dni robocze
                    Konfiguruj
                  • Solid Medium Reamer CSRM
                    • Volume Discount

                    EIKOSHA

                    Solid Medium Reamer CSRM

                    For General-Purpose Wear resistant Carbide K Type Adopted
                    Czytaj dalej
                    Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                    0.8 ~ 12.05Straight ShankGeneral Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎]15 ~ 80N/AStraightN/A--
                    Cena (bez VAT) od:
                    65.16 €
                    Standardowa data wysyłki:
                    6 dni robocze
                    Konfiguruj
                  • Carbide Chucking Reamer CSCRS
                    • Volume Discount

                    EIKOSHA

                    Carbide Chucking Reamer CSCRS

                    For General-Purpose Short blade, long shank, for deep hole finishing
                    Czytaj dalej
                    Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                    1 ~ 30Straight ShankGeneral Steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎]15 ~ 75N/AStraightN/A--
                    Cena (bez VAT) od:
                    83.18 €
                    Standardowa data wysyłki:
                    6 dni robocze
                    Konfiguruj
                  • Solid Taper Pin Reamer CSTPR
                    • Volume Discount

                    EIKOSHA

                    Solid Taper Pin Reamer CSTPR

                    For 1/50 Taper Pins
                    Czytaj dalej
                    Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                    -Straight ShankGeneral Steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎]28 ~ 194N/AStraightN/A1 ~ 131.46 ~ 16.74
                    Cena (bez VAT) od:
                    62.64 €
                    Standardowa data wysyłki:
                    6 dni robocze
                    Konfiguruj
                  • Solid Pin Gate Reamer CSPGR

                      EIKOSHA

                      Solid Pin Gate Reamer CSPGR

                      Sprue Hole Drilling Reamer for Pin-Gate Mold
                      Czytaj dalej
                      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                      -Straight ShankGeneral Steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎]25 ~ 60N/ASpiralN/A-1.42 ~ 9.01
                      Cena (bez VAT) od:
                      107.23 €
                      Standardowa data wysyłki:
                      6 dni robocze
                      Konfiguruj
                    • Spiral Long Hand Reamer SPLHR
                      • Volume Discount

                      EIKOSHA

                      Spiral Long Hand Reamer SPLHR

                      For long type deep hole, Hold on slop to improve assistance 1
                      Czytaj dalej
                      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                      3 ~ 14Straight ShankGeneral Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]80 ~ 200N/ASpiralN/A--
                      Cena (bez VAT) od:
                      94.68 €
                      Standardowa data wysyłki:
                      6 dni robocze
                      Konfiguruj
                    • Straight Shank Chucking Reamer SCR
                      • ZNIŻKA
                      • Volume Discount

                      EIKOSHA

                      Straight Shank Chucking Reamer SCR

                      For General-Purpose Short blade, long shank, for deep hole finishing
                      Czytaj dalej
                      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                      1 ~ 32Straight ShankGeneral Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]15 ~ 75N/AStraightN/A--
                      Cena (bez VAT) od:
                      75.51 €
                      Cena specjalna
                      Standardowa data wysyłki:
                      Towar dostępny w magazynie: 1 dzień roboczy
                      Niektóre pozycje mogą zostać wysłane tego samego dnia
                      Konfiguruj
                    • Straight Shank Spiral Chucking Reamer SPSCR
                      • Volume Discount

                      EIKOSHA

                      Straight Shank Spiral Chucking Reamer SPSCR

                      For General-Purpose Short blade, long shank, for deep hole finishing
                      Czytaj dalej
                      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                      1/2 ~ 25Straight ShankGeneral Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]20 ~ 65N/ASpiralN/A--
                      Cena (bez VAT) od:
                      80.64 €
                      Standardowa data wysyłki:
                      6 dni robocze
                      Konfiguruj
                    • Spiral Long Machine Reamer SPLMR

                        EIKOSHA

                        Spiral Long Machine Reamer SPLMR

                        Long type deep hole used Morse taper shank
                        Czytaj dalej
                        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                        5 ~ 30Taper shankGeneral Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]120 ~ 300N/ASpiralN/A--
                        Cena (bez VAT) od:
                        202.22 €
                        Standardowa data wysyłki:
                        6 dni robocze
                        Konfiguruj
                      • Helical Tapered Pin Reamer HTPR
                        • Volume Discount

                        EIKOSHA

                        Helical Tapered Pin Reamer HTPR

                        Strong Screw Type for 1/48 and 1/50 Taper Pins Reduces Cutting Resistance
                        Czytaj dalej
                        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                        -Straight ShankGeneral Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]28 ~ 318N/AHelicalN/A1 ~ 301.46 ~ 36.06
                        Cena (bez VAT) od:
                        84.91 €
                        Standardowa data wysyłki:
                        6 dni robocze
                        Konfiguruj
                      • Taper Pin Reamer for Machines TPRT

                          EIKOSHA

                          Taper Pin Reamer for Machines TPRT

                          Morse Taper Shank for 1/50 Taper Pins
                          Czytaj dalej
                          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                          -Taper shankGeneral Steel[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]63 ~ 335N/AStraightN/A3 ~ 404.16 ~ 46.3
                          Cena (bez VAT) od:
                          100.04 €
                          Standardowa data wysyłki:
                          6 dni robocze
                          Konfiguruj
                        • Morse Taper Reamer (For Machine Use) For Rough Finishing MTRT-RF

                            EIKOSHA

                            Morse Taper Reamer (For Machine Use) For Rough Finishing MTRT-RF

                            Morse Taper Shank For Morse Taper Hole (Rough Finish)
                            Czytaj dalej
                            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                            -Taper shankGeneral Steel[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]65 ~ 205N/AStraightN/A6.297 ~ 54.139.68 ~ 64.819
                            Cena (bez VAT) od:
                            125.61 €
                            Standardowa data wysyłki:
                            6 dni robocze
                            Konfiguruj
                          • Carbide Reamer B Series
                            • Volume Discount

                            FPTOOLS

                            Carbide Reamer B Series

                            [Features] It is possible to drill holes of general steel highly polished, and it is possible to drill without subsequent pilot hole.
                            Czytaj dalej
                            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                            0.9 ~ 14Straight ShankGeneral Steel[○] / Resin[○] / Alloy Steel[○]20 ~ 70N/AStraightN/A--
                            Cena (bez VAT) od:
                            47.59 €
                            Standardowa data wysyłki:
                            6 dni robocze
                            Konfiguruj
                          • Carbide Reamer C Series
                            • Volume Discount

                            FPTOOLS

                            Carbide Reamer C Series

                            [Features]· Ultra-low price contributes to cost reductions.· Carbide is used for the reamer, greatly reducing the price.· It will help reduce the machining costs by the improvement of tool life and reduction of tool costs.· Deep hole machining possible: Thinner shank diameter makes it possible to machine deep holes.· The processing range can be expanded.· High-precision: Precision equivalent to the best-selling carbide reamer "G-Series".· Can be used with peace of mind
                            Czytaj dalej
                            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                            2.91 ~ 12.1End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎]20 ~ 25N/AStraightN/A--
                            Cena (bez VAT) od:
                            43.46 €
                            Standardowa data wysyłki:
                            6 dni robocze
                            Konfiguruj
                          • Handle Reamer Straight Blade
                            • ZNIŻKA
                            • Volume Discount

                            FPTOOLS

                            Handle Reamer Straight Blade

                            [Features]· A hand reamer is used to finish the bore and the tip bite section is given a slight gradient (about 1 degree) to improve the guidance.· Blade diameter tolerance is unique at +0.005/0(J5).
                            Czytaj dalej
                            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                            0.3 ~ 16.02End Mill Shank / Straight ShankGeneral Steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[○] / Alloy Steel[○]7 ~ 95N/AStraightN/A--
                            Cena (bez VAT) od:
                            19.93 €
                            Cena specjalna
                            Standardowa data wysyłki:
                            Towar dostępny w magazynie: 1 dzień roboczy
                            Niektóre pozycje mogą zostać wysłane tego samego dnia
                            Konfiguruj
                          • High Helical Reamer
                            • Volume Discount

                            FPTOOLS

                            High Helical Reamer

                            Made using cobalt HSS for even longer cutting life. Also effective with thermally refined materials of 40 HRC or less.
                            Czytaj dalej
                            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                            6.5Straight ShankGeneral Steel[◎] / Cast Iron[◎] / Resin[○] / Die Steel[○] / Alloy Steel[◎]35N/ASpiralN/A--
                            Cena (bez VAT) od:
                            47.73 €
                            Standardowa data wysyłki:
                            6 dni robocze
                            Konfiguruj
                          • Straight Shank Chucking Reamer
                            • Volume Discount

                            FPTOOLS

                            Straight Shank Chucking Reamer

                            [Features] -The reamer expands the hole as the workpiece rotates during cutting.
                            Czytaj dalej
                            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                            1 ~ 14Straight ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[○] / Alloy Steel[○]20 ~ 50N/AStraightN/A--
                            Cena (bez VAT) od:
                            94.60 €
                            Standardowa data wysyłki:
                            6 dni robocze
                            Konfiguruj
                          • Spiral Machine Reamer SPMR

                              EIKOSHA

                              Spiral Machine Reamer SPMR

                              A spiral machine reamer. [Features] · Morse taper shank is adopted for machine use. · Adopts a torsion blade with excellent cutting powder discharge. [Applications] · For general purpose finishing.
                              Czytaj dalej
                              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                              3 ~ 60Taper shankGeneral Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]35 ~ 190N/ASpiralN/A--
                              Cena (bez VAT) od:
                              98.48 €
                              Standardowa data wysyłki:
                              6 dni robocze
                              Konfiguruj
                            • High Helical Reamer HHHR
                              • ZNIŻKA
                              • Volume Discount

                              EIKOSHA

                              High Helical Reamer HHHR

                              High-speed steel high-torsion spiral reamer.[Features]· Excellent in surface roughness and cutting powder processing thanks to the adoption of 60° torsion.· Reduces cutting resistance.[Applications]· Convenient for general purpose finishing.
                              Czytaj dalej
                              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                              2.1 ~ 16.05End Mill Shank / Straight ShankQuenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Heat-resistant alloy[○] / Alloy Steel[○]15 ~ 45N/AHelicalN/A--
                              Cena (bez VAT) od:
                              40.41 €
                              Cena specjalna
                              Standardowa data wysyłki:
                              Towar dostępny w magazynie: 1 dzień roboczy
                              Niektóre pozycje mogą zostać wysłane tego samego dnia
                              Konfiguruj
                            • Handle Reamer HR
                              • ZNIŻKA
                              • Volume Discount

                              EIKOSHA

                              Handle Reamer HR

                              General-purpose straight reamer (HSS) with straight edge that can be hand turned.[Features]· The shank has an angle and can be hand turned.· The bite is long (angle set at 1°) and the cutting edge does not easily get damaged.· Blade tip diameter: Available from 0.5 to 60.· Shank type: Available in end mill shank and straight shank.· Applicable work materials: General steel, cast iron, aluminum, copper, die steel and alloy steel.· Material: SKH51. Right-blade Straight, Bite Angle: 1°.[Applications]· Optimal for general purpose finishing.
                              Czytaj dalej
                              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                              0.56 ~ 28End Mill Shank / Straight ShankGeneral Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]12 ~ 140N/AStraightN/A--
                              Cena (bez VAT) od:
                              28.09 €
                              Cena specjalna
                              Standardowa data wysyłki:
                              Towar dostępny w magazynie: 1 dzień roboczy
                              Niektóre pozycje mogą zostać wysłane tego samego dnia
                              Konfiguruj
                            • Machine Reamer
                              • Volume Discount

                              EIKOSHA

                              Machine Reamer

                              A general-purpose straight reamer (HSS) with straight edge and Morse taper shank shape for machines.[Features]· Morse taper shank is adopted for machine use.[Applications]· For general purpose finishing.
                              Czytaj dalej
                              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                              2.95 ~ 85Taper shank / Morse Taper ShankGeneral Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○]35 ~ 215N/AStraightN/A--
                              Cena (bez VAT) od:
                              96.50 €
                              Standardowa data wysyłki:
                              6 dni robocze
                              Konfiguruj
                            • Handle Reamer

                                TRUSCO NAKAYAMA

                                Handle Reamer

                                [Characteristics] Has a gentle chamfer angle and four-cornered shank section, precisely finishing drilled holes or holes through which a rough ream has been put through. Although originally for hand-finishing, it can also be used for machine finishing at the final stage. [Application] Work Materials: Cast Iron, Carbon Steel, Alloy Steel, Tool Steel, Stainless Steel, Aluminum Alloy.
                                Czytaj dalej
                                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                1.8 ~ 5Straight ShankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Die Steel[○] / Alloy Steel[○]-N/AStraightN/A--
                                Cena (bez VAT) od:
                                32.34 €
                                Standardowa data wysyłki:
                                6 dni robocze
                                Konfiguruj
                              • Long Handle Reamer
                                • ZNIŻKA

                                TRUSCO NAKAYAMA

                                Long Handle Reamer

                                [Characteristics] Has a gentle chamfer angle and four-cornered shank section, precisely finishing drilled holes or holes through which a rough ream has been put through. Although originally for hand-finishing, it can also be used for machine finishing at the final stage. Suitable for deep groove machining. [Application] Work Materials: Cast Iron, Carbon Steel, Alloy Steel, Tool Steel, Stainless Steel, Aluminum Alloy.
                                Czytaj dalej
                                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                1 ~ 16Taper shankGeneral Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Die Steel[○] / Alloy Steel[○]-N/AStraightN/A--
                                Cena (bez VAT) od:
                                108.01 €
                                Cena specjalna
                                Standardowa data wysyłki:
                                Towar dostępny w magazynie: 1 dzień roboczy
                                Niektóre pozycje mogą zostać wysłane tego samego dnia
                                Konfiguruj
                              • BR Bridge Reamer
                                • ZNIŻKA
                                • Volume Discount

                                OKAZAKI SEIKO

                                BR Bridge Reamer

                                Used for large reamer allowances. Uses MCo material (cobalt high speed steel).
                                Czytaj dalej
                                Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                14 ~ 32Morse Taper ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]110 ~ 190N/AStraightN/A10 ~ 26-
                                Cena (bez VAT) od:
                                97.90 €
                                Cena specjalna
                                Standardowa data wysyłki:
                                Towar dostępny w magazynie: 1 dzień roboczy
                                Niektóre pozycje mogą zostać wysłane tego samego dnia
                                Konfiguruj
                              • BCER Reamer with Carbide Teeth (Straight Shank)

                                  OKAZAKI SEIKO

                                  BCER Reamer with Carbide Teeth (Straight Shank)

                                  Tip brazing type, straight shank specification. A reamer for complete blind holes that's capable of cleanly processing the bottom surface. End mill shank is adopted.
                                  Czytaj dalej
                                  Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                  12.5 ~ 30Straight ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]36 ~ 46N/ASpiralAvailable--
                                  Cena (bez VAT) od:
                                  139.11 €
                                  Standardowa data wysyłki:
                                  10 dni robocze
                                  Konfiguruj
                                • BCCRT Carbide Chucking Reamer (Morse Taper Shank)

                                    OKAZAKI SEIKO

                                    BCCRT Carbide Chucking Reamer (Morse Taper Shank)

                                    Tip brazing type, Morse taper shank specification. The neck is thinner than the blade diameter to enable deep hole drilling.
                                    Czytaj dalej
                                    Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                    12.5 ~ 30Morse Taper ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]36 ~ 46N/AStraightN/A--
                                    Cena (bez VAT) od:
                                    139.11 €
                                    Standardowa data wysyłki:
                                    10 dni robocze
                                    Konfiguruj
                                  • BCHR Carbide Helical Reamer (Straight Shank)

                                      OKAZAKI SEIKO

                                      BCHR Carbide Helical Reamer (Straight Shank)

                                      Tip brazing type, straight shank specification. The neck is thinner than the blade diameter to enable deep hole drilling. The shape is left-torsion to provide excellent stability for machining of holes with notches (key grooves, etc.).
                                      Czytaj dalej
                                      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                      12.5 ~ 30Straight ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]36 ~ 46N/AHelicalN/A--
                                      Cena (bez VAT) od:
                                      126.32 €
                                      Standardowa data wysyłki:
                                      8 dni robocze
                                      Konfiguruj
                                    • CCRM Carbide Chucking Reamer (Hundredths Range)
                                      • Volume Discount

                                      OKAZAKI SEIKO

                                      CCRM Carbide Chucking Reamer (Hundredths Range)

                                      A solid type. The neck is thinner than the blade diameter to enable deep hole drilling.
                                      Czytaj dalej
                                      Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                      2.95 ~ 12.05Straight ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]26 ~ 31N/AStraightN/A--
                                      Cena (bez VAT) od:
                                      38.47 €
                                      Standardowa data wysyłki:
                                      10 dni robocze
                                      Konfiguruj
                                    • With Carbide Teeth (and with Oil Hole)

                                        OKAZAKI SEIKO

                                        With Carbide Teeth (and with Oil Hole)

                                        A solid type. A reamer for complete blind holes that's capable of cleanly processing the bottom surface. End mill shank is adopted. Shape with oil hole discharges cutting chips smoothly.
                                        Czytaj dalej
                                        Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                        5 ~ 12End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]26 ~ 31N/ASpiralAvailable--
                                        Cena (bez VAT) od:
                                        117.80 €
                                        Standardowa data wysyłki:
                                        10 dni robocze
                                        Konfiguruj
                                      • CEORM Reamer with Carbide Teeth (and with Oil Hole) (Hundredths Range)

                                          OKAZAKI SEIKO

                                          CEORM Reamer with Carbide Teeth (and with Oil Hole) (Hundredths Range)

                                          A solid type. A reamer for complete blind holes that's capable of cleanly processing the bottom surface. End mill shank is adopted. Shape with oil hole discharges cutting chips smoothly.
                                          Czytaj dalej
                                          Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                          4.95 ~ 12.05End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]26 ~ 31N/ASpiralAvailable--
                                          Cena (bez VAT) od:
                                          136.98 €
                                          Standardowa data wysyłki:
                                          10 dni robocze
                                          Konfiguruj
                                        • CERM Reamer with Carbide Teeth (Hundredths Range)

                                            OKAZAKI SEIKO

                                            CERM Reamer with Carbide Teeth (Hundredths Range)

                                            A solid type. A reamer for complete blind holes that's capable of cleanly processing the bottom surface. End mill shank is adopted.
                                            Czytaj dalej
                                            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                            2.95 ~ 12.05End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]20 ~ 31N/ASpiralAvailable--
                                            Cena (bez VAT) od:
                                            100.75 €
                                            Standardowa data wysyłki:
                                            10 dni robocze
                                            Konfiguruj
                                          • CERS Short Reamer with Carbide Teeth
                                            • Volume Discount

                                            OKAZAKI SEIKO

                                            CERS Short Reamer with Carbide Teeth

                                            A solid type. Carbide end blade reamer (CER/CERM) short type.
                                            Czytaj dalej
                                            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                            3 ~ 6End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]6 ~ 12N/ASpiralAvailable--
                                            Cena (bez VAT) od:
                                            30.79 €
                                            Standardowa data wysyłki:
                                            8 dni robocze
                                            Konfiguruj
                                          • CHRS Short Carbide Helical Reamer
                                            • Volume Discount

                                            OKAZAKI SEIKO

                                            CHRS Short Carbide Helical Reamer

                                            A solid type. Carbide Helical Reamer (CHR/CHRM) Short Type
                                            Czytaj dalej
                                            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                            10End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]35N/AHelicalN/A--
                                            Cena (bez VAT) od:
                                            118.78 €
                                            Standardowa data wysyłki:
                                            10 dni robocze
                                            Konfiguruj
                                          • CHRSM Short Carbide Helical Reamer (Hundredths Range)
                                            • Volume Discount

                                            OKAZAKI SEIKO

                                            CHRSM Short Carbide Helical Reamer (Hundredths Range)

                                            A solid type. Carbide Helical Reamer (CHR/CHRM) Short Type
                                            Czytaj dalej
                                            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                            2.95 ~ 12.05End Mill ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]22 ~ 35N/AHelicalN/A--
                                            Cena (bez VAT) od:
                                            34.41 €
                                            Standardowa data wysyłki:
                                            7 dni robocze
                                            Konfiguruj
                                          • CR Chucking Reamer (Straight Shank)
                                            • Volume Discount

                                            OKAZAKI SEIKO

                                            CR Chucking Reamer (Straight Shank)

                                            Short blade type. A straight shank. Uses MCo material (cobalt high speed steel).
                                            Czytaj dalej
                                            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                            6Straight ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]30N/AStraightN/A--
                                            Cena (bez VAT) od:
                                            71.01 €
                                            Standardowa data wysyłki:
                                            6 dni robocze
                                            Konfiguruj
                                          • CSR Carbide Short Reamer (Straight Shank)
                                            • Volume Discount

                                            OKAZAKI SEIKO

                                            CSR Carbide Short Reamer (Straight Shank)

                                            Solid type. Boasts life ten times longer than HSS reamer. Corresponds to a wide range of workpieces from cast iron to steel. Capable of high accuracy drilling. Reduces machining time.
                                            Czytaj dalej
                                            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                            1 ~ 20Straight ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]12 ~ 45N/AStraightN/A--
                                            Cena (bez VAT) od:
                                            30.35 €
                                            Standardowa data wysyłki:
                                            8 dni robocze
                                            Konfiguruj
                                          • CSRM Short Carbide Reamer (Straight Shank) (Hundredths Range)
                                            • ZNIŻKA
                                            • Volume Discount

                                            OKAZAKI SEIKO

                                            CSRM Short Carbide Reamer (Straight Shank) (Hundredths Range)

                                            A solid type. Ideal dimensions added (0 to 0.005 dimensional tolerance). 0.005 mm increments added (exact dimensions ±0.03).
                                            Czytaj dalej
                                            Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                            0.99 ~ 7.44Straight ShankGeneral Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Die Steel[◎] / Alloy Steel[◎]12 ~ 35N/AStraightN/A--
                                            Cena (bez VAT) od:
                                            25.39 €
                                            Cena specjalna
                                            Standardowa data wysyłki:
                                            Towar dostępny w magazynie: 1 dzień roboczy
                                            Niektóre pozycje mogą zostać wysłane tego samego dnia
                                            Konfiguruj
                                          • LMR Long-Bladed Machine Reamer

                                              OKAZAKI SEIKO

                                              LMR Long-Bladed Machine Reamer

                                              Abundant variety of blade lengths. Ideal for deep drilling. Uses MCo material (cobalt high speed steel).
                                              Czytaj dalej
                                              Tool Diameter(mm)Shank Typework materialGroove Length(mm)Coating Y/NGroove ShapeBase Blade Y/NTip diameterLarge End Diameter
                                              5 ~ 50Morse Taper ShankGeneral Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○]150 ~ 400N/AStraightN/A--
                                              Cena (bez VAT) od:
                                              177.45 €
                                              Standardowa data wysyłki:
                                              7 dni robocze
                                              Konfiguruj