Tłumaczymy nasz sklep na język polski!
Wymaga to jednak czasu, ponieważ w ofercie mamy dużo artykułów, a na nasz sklep składa się wiele stron. Chwilowo nasz katalog produktów dostępny będzie w języku angielskim. Dziękujemy za cierpliwość!
Screw-Hole-Related Tools (Screw size (Nominal): Rc3/8)
Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machining, or for large-lot production, they are mounted to machine tools called tool holders or NC machine tool. High-speed steel is most commonly employed for these tools, and alloy carbide (coated alloy carbide is mainly applied) is also increasingly employed for its durability. When threading with taps, the thinner taps are, the more likely they break. As cutting chips solidify with heat, or the tap end makes contact with the bottom of pilot hole, there is more possibility the tap is damaged. Additionally, when using a coil insert, a dedicated tap needs to be used rather than a regular tap.
Liczba pozycji: 3
* Informacje o dniach wysyłki, kosztach wysyłki i cenach.
OSG
Taper Tap Series for Pipes TIN Coating Interrupted Thread Short Screws Long Shank TIN-LT-S-IRT
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Taper for Pipe Rc3/8 19 2.5P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless Steel (JIS-SUS)[◎] Tap for pipes For through hole / For blind hole Available KonfigurujCena (bez VAT) od:102.52 €Standardowa data wysyłki:6 dni roboczeOSG
Taper Tap Series for Pipes TIN Coated Short Screws Long Shank TIN-LT-S-TPT
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Taper for Pipe Rc3/8 19 2.5P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] Tap for pipes For through hole / For blind hole Available KonfigurujCena (bez VAT) od:93.52 €～Standardowa data wysyłki:6 dni robocze
OSG
Taper Tap Series for Pipes TIN Coated Long Shank TIN-LT-TPT
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N Taper for Pipe Rc3/8 19 2.5P Vanadium High-Speed Steel Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] Tap for pipes For through hole / For blind hole Available KonfigurujCena (bez VAT) od:88.92 €～Standardowa data wysyłki:6 dni robocze