Tłumaczymy nasz sklep na język polski!

Wymaga to jednak czasu, ponieważ w ofercie mamy dużo artykułów, a na nasz sklep składa się wiele stron. Chwilowo nasz katalog produktów dostępny będzie w języku angielskim. Dziękujemy za cierpliwość!

Warunki filtrowania

Wyczyść wszystko

Screw Types
- Meter
Screw size (Nominal)
- M36
Pitch (P), Number of Threading(mm)
- 1
- 1.5
- 2
- 3
- 4
Chamfer threads (Lcf)
- 2P
- 2.5P
- 3P
- 4P
- 5P
Tool Material Type
- Powder high-speed steel
- Alloy HSS
- Vanadium High-Speed Steel
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
Tap Type
- Spiral Tap
- Point tap
- Roll tap
- Hand Tap
- Die
Hole type
- For through hole
- For blind hole
Coating Y/N
- Available
- N/A
Coating Type
- TiCN
- TiN
- Non-Coated
- Other
Overall Length (L)(mm)
- 110
- 155
- 170
- 200
- 250
- 300
Producent

Screw-Hole-Related Tools (Screw size (Nominal): M36)

Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machining, or for large-lot production, they are mounted to machine tools called tool holders or NC machine tool. High-speed steel is most commonly employed for these tools, and alloy carbide (coated alloy carbide is mainly applied) is also increasingly employed for its durability. When threading with taps, the thinner taps are, the more likely they break. As cutting chips solidify with heat, or the tap end makes contact with the bottom of pilot hole, there is more possibility the tap is damaged. Additionally, when using a coil insert, a dedicated tap needs to be used rather than a regular tap.

Liczba pozycji: 16

* Informacje o dniach wysyłki, kosztach wysyłki i cenach.

Lista

Zdjęcie

Porównaj specyfikacje

Liczba pozycji do wyświetlenia:Sortuj według:

Data wysyłki:

ZNIŻKA
Volume Discount

OSG

A Tap Series, Spiral Tap, A-SFT

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.

Czytaj dalej

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M36	1.5 ～ 4	2.5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Spiral Tap	For blind hole	Available

Cena (bez VAT) od:

303.00 €

Cena specjalna

Standardowa data wysyłki:

6 dni robocze

Konfiguruj

Spiral Tap Series, General Purpose EX-SFT

ZNIŻKA
Volume Discount
Stock

OSG

Spiral Tap Series, General Purpose EX-SFT

Suited for drilling blind holes in materials that leave coil shaped connected cutting debris such as carbon steel, alloyed steel, and non-ferrous metals.

Czytaj dalej

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M36	1.5 ～ 4	3P	Vanadium High-Speed Steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Spiral Tap	For blind hole	N/A

Cena (bez VAT) od:

187.05 €～

Cena specjalna

Standardowa data wysyłki:

6 dni robocze

Konfiguruj

Groove-Free Tap Series X Performer S-XPF

ZNIŻKA
Volume Discount

OSG

Groove-Free Tap Series X Performer S-XPF

When working carbon steel and alloyed steel has fewer problems with cutting debris compared to cutting taps, allowing longer lasting machining. Particularly effective in working with automobile related cast steel parts * M2.6 and below will be changed to constant powdered high strength steel (CPM). Please understand ahead of time.

Czytaj dalej

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M36	4	2P	Powder high-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Roll tap	For through hole / For blind hole	Available

Cena (bez VAT) od:

340.34 €

Cena specjalna

Standardowa data wysyłki:

6 dni robocze

Konfiguruj

- ZNIŻKA
- Volume Discount
OSG
Screw Cutting Round Die Series, General Round Dies for Screw Cutting, RD-S
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N
Meter M36 1 ～ 4 - Alloy HSS - Die - N/A
Cena (bez VAT) od:
177.12 €～
Cena specjalna
Standardowa data wysyłki:
6 dni robocze
Konfiguruj

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M36	1 ～ 4	-	Alloy HSS	-	Die	-	N/A

ZNIŻKA
Volume Discount

OSG

Point Tap Series, for General, EX-POT

Suited for materials that leave coil shaped connected cutting dust that is in general use such as carbon steel, alloyed steel, and non-ferrous metals. Reliably Pushes Cutting Debris Forward Removing Concerns of Debris Interference

Czytaj dalej

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M36	1.5 ～ 4	5P	Vanadium High-Speed Steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	N/A

Cena (bez VAT) od:

180.52 €～

Cena specjalna

Standardowa data wysyłki:

6 dni robocze

Konfiguruj

Point Tap Series, General Long Shank, EX-LT-POT

ZNIŻKA
Volume Discount

OSG

Point Tap Series, General Long Shank, EX-LT-POT

Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap

Czytaj dalej

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M36	4	5P	Vanadium High-Speed Steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	N/A

Cena (bez VAT) od:

327.52 €

Cena specjalna

Standardowa data wysyłki:

6 dni robocze

Konfiguruj

- Volume Discount
GEDORE
Screw extractor
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N
- M33 ～ M40 - - - - - - -
Cena (bez VAT) od:
34.68 €
Standardowa data wysyłki:
12 dni robocze
Konfiguruj
SANDVIK
SANDVIK CoroTap 300 Cutting Tap with Spiral Flutes
Screw Types Screw size (Nominal) Pitch (P), Number of Threading(mm) Chamfer threads (Lcf) Tool Material Type work material Tap Type Hole type Coating Y/N
Meter M36 - - - - - - -
Cena (bez VAT) od:
269.17 €～
Standardowa data wysyłki:
5 dni robocze
Konfiguruj

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
-	M33 ～ M40	-	-	-	-	-	-	-

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M36	-	-	-	-	-	-	-

Spiral Tap Series, for Stainless EX-SUS-SFT

Volume Discount

OSG

Spiral Tap Series, for Stainless EX-SUS-SFT

Suited for drilling blind holes in stainless steel, heat resistant steel, chrome-nickel-mangalloy. Also suited for materials such as carbon steel and alloyed steel.

Czytaj dalej

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M36	4	3P	Vanadium High-Speed Steel	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Spiral Tap	For blind hole	N/A

Cena (bez VAT) od:

211.05 €

Standardowa data wysyłki:

6 dni robocze

Konfiguruj

Spiral Tap Series, General Purpose, Long Shank EX-LT-SFT

Volume Discount

OSG

Spiral Tap Series, General Purpose, Long Shank EX-LT-SFT

Used in cases such as insufficient protruding length of the threaded portion of the standard spiral tap

Czytaj dalej

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M36	4	2.5P	Vanadium High-Speed Steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Spiral Tap	For blind hole	N/A

Cena (bez VAT) od:

280.50 €～

Standardowa data wysyłki:

6 dni robocze

Konfiguruj

Point Tap Series For Stainless Steel Use EX-SUS-POT

ZNIŻKA
Volume Discount

OSG

Point Tap Series For Stainless Steel Use EX-SUS-POT

Offers superb sharpness and durability. Can be used to drill holes in difficult-to-cut stainless steel.

Czytaj dalej

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M36	1.5 ～ 4	4P	Vanadium High-Speed Steel	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Point tap	For through hole	N/A

Cena (bez VAT) od:

202.50 €

Cena specjalna

Standardowa data wysyłki:

6 dni robocze

Konfiguruj

Point Tap Series, General Homo Treatment, EX-H-POT

Volume Discount

OSG

Point Tap Series, General Homo Treatment, EX-H-POT

Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap

Czytaj dalej

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M36	4	5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	N/A

Cena (bez VAT) od:

205.83 €

Standardowa data wysyłki:

6 dni robocze

Konfiguruj

Point Tap Series, for Difficult-to-Machine Material, CPM-POT

ZNIŻKA
Volume Discount

OSG

Point Tap Series, for Difficult-to-Machine Material, CPM-POT

Workpiece material is suitable for through hole drilling of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Czytaj dalej

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M36	4	5P	Powder high-speed steel	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Point tap	For through hole	N/A

Cena (bez VAT) od:

299.00 €

Cena specjalna

Standardowa data wysyłki:

6 dni robocze

Konfiguruj

Spiral Tap Series, for Hard-to-Cut Materials, CPM-SFT

ZNIŻKA
Volume Discount

OSG

Spiral Tap Series, for Hard-to-Cut Materials, CPM-SFT

Workpiece material is suitable for blind hole drilling of about 20 ~ 35 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Czytaj dalej

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M36	4	3P	Powder high-speed steel	High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Spiral Tap	For blind hole	N/A

Cena (bez VAT) od:

309.83 €

Cena specjalna

Standardowa data wysyłki:

6 dni robocze

Konfiguruj

Hand Tap Series, for Difficult-to-Machine Material, CPM-HT

ZNIŻKA
Volume Discount

OSG

Hand Tap Series, for Difficult-to-Machine Material, CPM-HT

Workpiece material is suitable for internal thread machining of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Czytaj dalej

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M36	4	2P ～ 5P	Powder high-speed steel	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Hand Tap	For through hole / For blind hole	N/A

Cena (bez VAT) od:

258.38 €

Cena specjalna

Standardowa data wysyłki:

6 dni robocze

Konfiguruj

Volume Discount

OSG

Point Tap Series, Tin Coated, TIN-POT

Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel

Czytaj dalej

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M36	1.5 ～ 4	5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	Available

Cena (bez VAT) od:

319.58 €

Standardowa data wysyłki:

6 dni robocze

Konfiguruj

Screw-Hole-Related Tools (Screw size (Nominal): M36)

Kategorie związane z Screw-Hole-Related Tools