Tłumaczymy nasz sklep na język polski!

Wymaga to jednak czasu, ponieważ w ofercie mamy dużo artykułów, a na nasz sklep składa się wiele stron. Chwilowo nasz katalog produktów dostępny będzie w języku angielskim. Dziękujemy za cierpliwość!

Warunki filtrowania

Wyczyść wszystko

Stan magazynowy
Pokaż tylko pozycje magazynowe

Screw Types

Meter

Screw size (Nominal)

Pitch (P), Number of Threading(mm)

0.75
1
1.25
1.5
2
2.5

Chamfer threads (Lcf)

1.5P
2P
2.5P
3P
4P
5P
5.5P
6P

Tool Material Type

High-speed steel
Powder high-speed steel
Carbide
Alloy HSS
Vanadium High-Speed Steel
JIS-SKS

work material

Low-Carbon Steel (carbon alloy less than 0.25%)
Medium carbon steel (carbon content 0.25 to 0.45%)
High Carbon Steel (C with a content over 0.45%)
Alloy Steel (SCM)
Stainless Steel (JIS-SUS)
Quenched and tempered steel (25 to 35 HRC)
Quenched and tempered steel (35 to 45 HRC)
Tool Steel (Before SKD Hardening)
Steel casting (SC)
Cast Iron (FC)
Ductile Cast Iron (FCD)
Copper (Cu)
Brass (Bs)
Brass cast iron (BsC)
Bronze (Pb)
Aluminum Rolled Material (AL)
Aluminum Alloy Casting (AC, ADC)
Magnesium Alloy (MC)
Zinc Alloy Casting (ZDC)
Titanium Alloy (Ti-6Al-4V, etc)
Nickel-based alloy (Inconel, etc.)
Thermoplastic plastic (vinyl chloride, nylon, etc.)

Tap Type

Spiral Tap
Point tap
Roll tap
Hand Tap
Die
Modification/removal Tool

Hole type

For through hole
For blind hole

Coating Y/N

Available
N/A

Coating Type

TiCN
TiN
Non-Coated
Other

Overall Length (L)(mm)

Producent

Screw-Hole-Related Tools (Screw size (Nominal): M22)

Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machining, or for large-lot production, they are mounted to machine tools called tool holders or NC machine tool. High-speed steel is most commonly employed for these tools, and alloy carbide (coated alloy carbide is mainly applied) is also increasingly employed for its durability. When threading with taps, the thinner taps are, the more likely they break. As cutting chips solidify with heat, or the tap end makes contact with the bottom of pilot hole, there is more possibility the tap is damaged. Additionally, when using a coil insert, a dedicated tap needs to be used rather than a regular tap.

Liczba pozycji: 34

* Informacje o dniach wysyłki, kosztach wysyłki i cenach.

Lista

Zdjęcie

Porównaj specyfikacje

Liczba pozycji do wyświetlenia:Sortuj według:

Data wysyłki:

ZNIŻKA
Volume Discount

OSG

A Tap Series, Spiral Tap, A-SFT

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.

Czytaj dalej

Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
Meter	M22	1 ～ 2.5	2.5P	Powder high-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Spiral Tap	For blind hole	Available

Cena (bez VAT) od:

102.00 €～

Cena specjalna

Standardowa data wysyłki:

6 dni robocze

Screw-Hole-Related Tools (Screw size (Nominal): M22)

Kategorie związane z Screw-Hole-Related Tools