Screw-Hole-Related Tools (Screw size (Nominal): M8)

• 

  Hand Taps (14)

• 

  Spiral Taps (37)

• 

  Point Taps (30)

• 

  Roll Taps (14)

• 

  Taps for Pipes

• 

  Thread Cutters (10)

• 

  Thread-Cutting-Related Tools (2)

• 

  Dies (4)

• 

  Tap Wrenches

• 

  Modification/Removal Tools (5)

• 

  • ZNIŻKA
  • Volume Discount

  OSG

  A Tap Series, Spiral Tap, A-SFT

  Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.

  Czytaj dalej

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	0.75 ～ 1.25	1.5P ～ 2.5P	Powder high-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Spiral Tap	For blind hole	Available

  Cena (bez VAT) od:

  20.88 €～

  Cena specjalna

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • ZNIŻKA
  • Volume Discount
  • Stock

  OSG

  Spiral Tap Series, General Purpose EX-SFT

  Suited for drilling blind holes in materials that leave coil shaped connected cutting debris such as carbon steel, alloyed steel, and non-ferrous metals.

  Czytaj dalej

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	0.5 ～ 1.25	2.5P	Vanadium High-Speed Steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Spiral Tap	For blind hole	N/A

  Cena (bez VAT) od:

  11.49 €～

  Cena specjalna

  Standardowa data wysyłki:

  Towar dostępny w magazynie: 1 dzień roboczy

  Niektóre pozycje mogą zostać wysłane tego samego dnia

  Konfiguruj
• 

  • ZNIŻKA
  • Volume Discount

  OSG

  Groove-Free Tap Series X Performer S-XPF

  When working carbon steel and alloyed steel has fewer problems with cutting debris compared to cutting taps, allowing longer lasting machining. Particularly effective in working with automobile related cast steel parts * M2.6 and below will be changed to constant powdered high strength steel (CPM). Please understand ahead of time.

  Czytaj dalej

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1 ～ 1.25	2P ～ 4P	Powder high-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Roll tap	For through hole / For blind hole	Available

  Cena (bez VAT) od:

  28.84 €～

  Cena specjalna

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  OSG

  Hand Tap Series, Hand Taps for Super High Hardness Steel, VX-OT

  Suitable for 50 HRC and up Tempered Steel (Alloy Steel, Die Steel, Tool Steel, Etc.) Tapping

  Czytaj dalej

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1 ～ 1.25	3P	Carbide	High Hardness Steel (50-60 HRC)[◎]	Hand Tap	For through hole / For blind hole	Available

  Cena (bez VAT) od:

  89.92 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • Volume Discount

  MISUMI

  Carbide Spiral Tap

  [Features] -Carbide tap with uncoated spiral flute-Can be used for machining blind holes-Suitable for mass production of aluminium and copper alloys

  Czytaj dalej

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1.25	1.5 P ～ 2.5 P	Carbide	Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎]	Spiral Tap	For blind hole	N/A

  Cena (bez VAT) od:

  63.47 €

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  • Volume Discount

  MISUMI

  Carbide Hand Tap

  [Features] -Hand taps made from uncoated carbide-Can be used for both blind holes and through holes-Suitable for mass production of taps for various cast irons.

  Czytaj dalej

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1.25	1.5 P ～ 3 P	Carbide	Steel casting (SC)[○] / Cast Iron (FC)[○] / Aluminum Rolled Material (AL)[○]	Hand Tap	For through hole / For blind hole	N/A

  Cena (bez VAT) od:

  63.47 €

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  • Volume Discount

  MISUMI

  High-Speed Steel Hand Tap【10 szt.】

  [Features] A general purpose hand tap made from uncoated high speed steelHigh versatility, suitable for a wide range of applications and materials such as aluminium and general steel.

  Czytaj dalej

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1.25	1.5 P ～ 9 P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Hand Tap	For through hole / For blind hole	N/A

  Cena (bez VAT) od:

  43.56 €

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  • ZNIŻKA
  • Volume Discount

  OSG

  Point Tap Series For Stainless Steel Use EX-SUS-POT

  Offers superb sharpness and durability. Can be used to drill holes in difficult-to-cut stainless steel.

  Czytaj dalej

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1 ～ 1.25	4P	Vanadium High-Speed Steel	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Point tap	For through hole	N/A

  Cena (bez VAT) od:

  12.96 €～

  Cena specjalna

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  YAMAWA MFG

  Carbide Tap for Ultra High Hardness Steel UH-CT

  [SKD material] [Prehardened] Ideal for tapping 55 to 60 HRC (Max: 63 HRC). The machined length of the screw is 1.5 D or less, and the biting length is 5 threads for long life. We recommend using the maximum value 6H female thread bore for the pilot hole diameter.

  Czytaj dalej

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1.25	5P	Carbide	High Hardness Steel (50-60 HRC)[○]	Point tap	For through hole / For blind hole	Available

  Cena (bez VAT) od:

  136.62 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • ZNIŻKA
  • Volume Discount

  OSG

  Screw Cutting Round Die Series, General Round Dies for Screw Cutting, RD-S

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	0.5 ～ 1.25	-	Alloy HSS	-	Die	-	N/A

  Cena (bez VAT) od:

  32.18 €～

  Cena specjalna

  Standardowa data wysyłki:

  Towar dostępny w magazynie: 1 dzień roboczy

  Niektóre pozycje mogą zostać wysłane tego samego dnia

  Konfiguruj
• 

  • ZNIŻKA
  • Volume Discount

  ISHIHASHI

  Hand Tap Set (for Metric Thread Screw)

  [Features]· A tungsten hand tap set.· Can be used for both through holes and blind holes.· Economical compared to HSS.[Applications]· Work materials: Iron, light metal.[Material]· Alloy tool steel (SKS2)

  Czytaj dalej

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1.25	-	-	-	Hand Tap	-	-

  Cena (bez VAT) od:

  21.35 €

  Cena specjalna

  Standardowa data wysyłki:

  Towar dostępny w magazynie: 1 dzień roboczy

  Możliwa wysyłka tego samego dnia

  Konfiguruj
• 

  • ZNIŻKA
  • Volume Discount

  OSG

  Point Tap Series, for General, EX-POT

  Suited for materials that leave coil shaped connected cutting dust that is in general use such as carbon steel, alloyed steel, and non-ferrous metals. Reliably Pushes Cutting Debris Forward Removing Concerns of Debris Interference

  Czytaj dalej

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	0.5 ～ 1.25	5P	Vanadium High-Speed Steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	N/A

  Cena (bez VAT) od:

  11.83 €～

  Cena specjalna

  Standardowa data wysyłki:

  Towar dostępny w magazynie: 1 dzień roboczy

  Niektóre pozycje mogą zostać wysłane tego samego dnia

  Konfiguruj
• 

  MISUMI

  TiN Coated High-Speed Steel Roll Tap【5 szt.】

  [Features] -Used for tapping that produces no chips-Suitable for a wide range of materials, from general steel to non-ferrous alloys-Excellent abrasion resistance and chip weld resistance due to TiN coating.

  Czytaj dalej

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1.25	2 P ～ 4 P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎]	Roll tap	For through hole / For blind hole	Available

  Cena (bez VAT) od:

  90.32 €

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  • Volume Discount

  OSG

  Hand Tap Series, V Coating Powder High Speed (High Hardness Steel), V-XPM-HT

  Suitable for 42-52 HRC tempered steel (alloy steel, die steel, tool steel, etc.) tapping. Excellent Abrasion Resistant V Coating Has Been Applied to Maximize the Properties of the Base Material on the Surface

  Czytaj dalej

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1 ～ 1.25	2.5P ～ 5P	Powder high-speed steel	Quenched and tempered steel (45 to 55 HRC)[◎]	Hand Tap	For through hole / For blind hole	Available

  Cena (bez VAT) od:

  34.78 €～

  Standardowa data wysyłki:

  8 dni robocze

  Konfiguruj
• 

  OSG

  Hand Tap Series, Super Hard Hand Tap, OTT

  Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass castings and other workpieces with high precision automatic machine.

  Czytaj dalej

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1 ～ 1.25	1.5P ～ 3P	Carbide	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎]	Hand Tap	For through hole / For blind hole	N/A

  Cena (bez VAT) od:

  94.08 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • ZNIŻKA
  • Volume Discount

  OSG

  Point Tap Series, General Long Shank, EX-LT-POT

  Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap

  Czytaj dalej

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	0.75 ～ 1.25	5P	Vanadium High-Speed Steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	N/A

  Cena (bez VAT) od:

  17.12 €～

  Cena specjalna

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • Volume Discount

  GEDORE

  Screw extractor

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	M8 ～ M11	-	-	-	-	-	-	-

  Cena (bez VAT) od:

  7.48 €

  Standardowa data wysyłki:

  11 dni robocze

  Konfiguruj
• 

  SANDVIK

  SANDVIK CoroTap 400 Forming Tap

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	-	-	-	-	-	-	-

  Cena (bez VAT) od:

  42.45 €～

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  SANDVIK

  SANDVIK CoroTap 300 Cutting Tap with Spiral Flutes

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	-	-	-	-	-	-	-

  Cena (bez VAT) od:

  22.09 €～

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  • Volume Discount

  OSG

  Hand Tap Series, Hand Taps for Super High Hardness Steel, WH55-OT

  Suitable for threading hardened steel up to 55 HRC.Material: High hardness steel up to 55 HRCFor coating / surface treatment / steelAccuracy (class) OH3

  Czytaj dalej

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1.25	2.5P ～ 5P	Carbide	Quenched and tempered steel (45 to 55 HRC)[◎]	Hand Tap	For through hole / For blind hole	Available

  Cena (bez VAT) od:

  89.92 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • Volume Discount

  OSG

  Hand Tap Series, Tin Coated, TIN-HT

  Excellent cutting edge strength makes it suitable for high hardness material machining without chipping.

  Czytaj dalej

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1.25	1.5P ～ 5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Hand Tap	For through hole / For blind hole	Available

  Cena (bez VAT) od:

  20.76 €

  Standardowa data wysyłki:

  8 dni robocze

  Konfiguruj
• 

  OSG

  Groove-Free Tap Series VP New Roll Long Shank VP-LT-NRT

  Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

  Czytaj dalej

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1 ～ 1.25	2P ～ 4P	Powder high-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Roll tap	For blind hole	Available

  Cena (bez VAT) od:

  33.34 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  GUHRING

  Thread Cutter for Blind Hole / Through Hole TM SP for 2 X D 4133

  [Features]· Threading is performed with helical cutting.· If the pitch is the same, one unit can process threads with different diameters.· Both right-handed and left-handed female threads can be machined.

  Czytaj dalej

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1.25	-	Carbide	-	Thread cutter	For through hole / For blind hole	Available

  Cena (bez VAT) od:

  203.48 €

  Standardowa data wysyłki:

  24 dni robocze

  Konfiguruj
• 

  OSG

  A Tap Series, Spiral Tap, Long Shank A-LT-SFT

  Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.

  Czytaj dalej

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	0.75 ～ 1.25	2.5P	Powder high-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Spiral Tap	For blind hole	Available

  Cena (bez VAT) od:

  29.12 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  OSG

  A Tap Series Point Tap Long Shank A-LT-POT

  Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.

  Czytaj dalej

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	0.75 ～ 1.25	5P	Powder high-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Point tap	For through hole	Available

  Cena (bez VAT) od:

  28.10 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • Volume Discount

  REX TOOLS

  Die metric

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	M8	-	-	-	-	-	-	-

  Cena (bez VAT) od:

  4.53 €

  Standardowa data wysyłki:

  3 dni robocze

  Konfiguruj
• 

  SANDVIK

  SANDVIK CoroTap 200 Cutting Tap with Spiral Point

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	-	-	-	-	-	-	-

  Cena (bez VAT) od:

  23.60 €～

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  • Volume Discount

  MISUMI

  High-Speed Steel Point Tap【10 szt.】

  [Features] -High speed uncoated steel tap with spiral point-Can be used for through hole machining-Effective for continuous chip materials such as carbon steel and steel alloys.

  Czytaj dalej

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1.25	5 P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Point tap	For through hole	N/A

  Cena (bez VAT) od:

  93.03 €

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  • Volume Discount

  MISUMI

  MT Series High-Speed Steel Point Tap

  [New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel. The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping. [Slide Discount] Great deals are available on the purchase of more than 5 pieces.

  Czytaj dalej

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1 ～ 1.25	5 P	Cobalt HSS	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Point tap	For through hole	N/A

  Cena (bez VAT) od:

  10.58 €

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  • Volume Discount

  OSG

  Spiral Tap Series, for Stainless Steel (Compatible with Water-Soluble Cutting Oil) CC-SUS-SFT

  Allows internal threading of stainless steel with a water soluble cutting fluid.Tool material: Vanadium high speed steelHole type: For blind holesMaterial: General steel/stainless steel.

  Czytaj dalej

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1.25	2.5P	Vanadium High-Speed Steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless Steel (JIS-SUS)[◎]	Spiral Tap	For blind hole	Available

  Cena (bez VAT) od:

  22.97 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • Volume Discount

  OSG

  Spiral Tap Series, for Stainless EX-SUS-SFT

  Suited for drilling blind holes in stainless steel, heat resistant steel, chrome-nickel-mangalloy. Also suited for materials such as carbon steel and alloyed steel.

  Czytaj dalej

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1 ～ 1.25	2.5P	Vanadium High-Speed Steel	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Spiral Tap	For blind hole	N/A

  Cena (bez VAT) od:

  12.82 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • Volume Discount

  OSG

  Spiral Tap Series, for Stainless Steel (Long Shank) EX-LT-SUS-SFT

  Suited for drilling blind holes in stainless steel, heat resistant steel, chrome-nickel-mangalloy. Also suited for materials such as carbon steel and alloyed steel.

  Czytaj dalej

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1.25	2.5P	Vanadium High-Speed Steel	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Spiral Tap	For blind hole	N/A

  Cena (bez VAT) od:

  17.52 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • Volume Discount

  OSG

  Spiral Tap Series, General Purpose, Long Shank EX-LT-SFT

  Used in cases such as insufficient protruding length of the threaded portion of the standard spiral tap

  Czytaj dalej

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	0.75 ～ 1.25	2.5P	Vanadium High-Speed Steel	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Spiral Tap	For blind hole	N/A

  Cena (bez VAT) od:

  17.52 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  OSG

  Hand Tap Series, Super Hardness Hand Taps, Long Shank, LT-OTT

  Suitable in case of heavily tapping common cast iron, tough cast iron, thermosetting resins, brass castings and other workpieces with high precision automatic machine.

  Czytaj dalej

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1 ～ 1.25	1.5P ～ 3P	Carbide	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[◎]	Hand Tap	For through hole / For blind hole	N/A

  Cena (bez VAT) od:

  127.29 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • Volume Discount

  OSG

  Point Tap Series, General Homo Treatment, EX-H-POT

  Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap

  Czytaj dalej

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1 ～ 1.25	5P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	N/A

  Cena (bez VAT) od:

  11.69 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • ZNIŻKA
  • Volume Discount

  OSG

  Point Tap Series, for Deep Holes, EX-DH-POT

  Suitable for through holes with extra long threads and materials that easily suffer sticking.

  Czytaj dalej

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1.25	4P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Point tap	For through hole	N/A

  Cena (bez VAT) od:

  12.51 €～

  Cena specjalna

  Standardowa data wysyłki:

  8 dni robocze

  Konfiguruj
• 

  • ZNIŻKA
  • Volume Discount

  OSG

  Point Tap Series, for Difficult-to-Machine Material, CPM-POT

  Workpiece material is suitable for through hole drilling of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

  Czytaj dalej

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1.25	5P	Powder high-speed steel	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Point tap	For through hole	N/A

  Cena (bez VAT) od:

  15.26 €

  Cena specjalna

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • ZNIŻKA
  • Volume Discount

  OSG

  Groove-Free Tap Series, Tin Coated, TIN-NRT

  Suitable for both steel and non-ferrous alloys. Capable of high-speed cutting and efficient tapping; offer drastically improved durability.

  Czytaj dalej

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1 ～ 1.25	2P ～ 4P	Vanadium High-Speed Steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Roll tap	For blind hole	Available

  Cena (bez VAT) od:

  25.23 €～

  Cena specjalna

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • Volume Discount

  TRUSCO NAKAYAMA

  Hand Tap Set (for metric screws / HSS-E)

  [Characteristics] Can be used for both through holes and blind holes. High-speed steel (HSS-E) tap set. Work materials: general steel, low to medium carbon steel, alloy steel.

  Czytaj dalej

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1.25	-	High-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○]	Hand Tap	For through hole / For blind hole	N/A

  Cena (bez VAT) od:

  49.60 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • Volume Discount

  YAMAWA MFG

  Titanium coating point tab PO-V (N-PO-V)

  Coated point tap suitable for low carbon steel to high carbon steel machining.[Features]· Since it has a coating, stable processing is possible at medium cutting speeds, and the tool life is improved.[Applications]· Can process both synchronously and asynchronously.· Recommended for machining speeds of 10 to 20 m/min (completely synchronous feeding recommended for speeds of 15 m/min or higher).

  Czytaj dalej

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1.25	5P	High-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Point tap	For through hole	Available

  Cena (bez VAT) od:

  37.57 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  YAMAWA MFG

  High Performance Roll Tap HP+ RZ / HP-RZ

  It is suitable for processing steel materials (35 HRC or less) and light alloys, and can support high-speed machining (20-50 m/min)

  Czytaj dalej

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Unified	M8	1.25	2P ～ 4P	Powder high-speed steel	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Roll tap	For through hole / For blind hole	Available

  Cena (bez VAT) od:

  47.42 €

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • Volume Discount

  YAMAWA MFG

  Solid Die D for Metric Threads

  Solid die with improved die runout precision.[Features]· High-speed tool steel (HSS) is adopted, realizing stable machining.· The front surface is the surface with a marking on the chamfering.· The machining reference surface at the rear is set so that the end face makes close contact when the holder is attached.· Screw adjustments are not required and die outer diameter precision is improved compared to adjustable dies as this is a solid die.· Solves problems particular to adjustable type dies, realizing high precision screw machining.[Applications]· Convenient for cutting male threads on various work materials, whether hand turned or used with machinery.· Combining with NC tooling enables machining with a MC.

  Czytaj dalej

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1.25	-	High-speed steel	-	Die	-	N/A

  Cena (bez VAT) od:

  63.90 €～

  Standardowa data wysyłki:

  6 dni robocze

  Konfiguruj
• 

  • Volume Discount

  REX TOOLS

  Thread repair kit

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  -	M5 ～ M12	-	-	-	-	-	-	-

  Cena (bez VAT) od:

  32.29 €～

  Standardowa data wysyłki:

  3 dni robocze

  Konfiguruj
• 

  SANDVIK

  SANDVIK CoroTap 100 Cutting Tap with Straight Flutes

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	-	-	-	-	-	-	-

  Cena (bez VAT) od:

  41.20 €～

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj
• 

  • Volume Discount

  MISUMI

  TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads

  Threading cutters that enable the high-speed stable processing are available at special prices

  Czytaj dalej

  Screw Types	Screw size (Nominal)	Pitch (P), Number of Threading(mm)	Chamfer threads (Lcf)	Tool Material Type	work material	Tap Type	Hole type	Coating Y/N
  Meter	M8	1.25	-	Carbide	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Thread cutter	For through hole / For blind hole	Available

  Cena (bez VAT) od:

  108.15 €～

  Standardowa data wysyłki:

  5 dni robocze

  Konfiguruj