Rejestracja

Tłumaczymy nasz sklep na język polski!

Wymaga to jednak czasu, ponieważ w ofercie mamy dużo artykułów, a na nasz sklep składa się wiele stron. Chwilowo nasz katalog produktów dostępny będzie w języku angielskim. Dziękujemy za cierpliwość!
Warunki filtrowania

Wyczyść wszystko

  • Stan magazynowy
  • Hole diameter (drill diameter) D(mm)
  • Groove Length L(mm)
  • work material
  • Tool Material Type
  • Shank Type
  • Coating Y/N
  • Straight Shank / End Mill Shank Drills (Carbide) (work material: Stainless Steel Strona 2)

      • TiAlN Coated Carbide Burnishing Bladed Drill, Stub (No Oil Holes), Regular (with Oil Holes)
        • Volume Discount

        MISUMI

        TiAlN Coated Carbide Burnishing Bladed Drill, Stub (No Oil Holes), Regular (with Oil Holes)

        [Features] -Providing an edge with smoothing groove on the outer circumference, it is possible to perform hole drilling and hole finishing simultaneously-Supports a wide range of materials, from general steel to stainless steel-Internal lubricant supply efficiently removes chips and improves tool life (TAC-HBNESDR)-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
        Czytaj dalej
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        3 ~ 1320 ~ 71Stainless Steel[○]Carbide62 ~ 124End Mill ShankAvailableTiAlNAvailable / N/A
        Cena (bez VAT) od:
        55.49 €
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • TiAlN Coated Carbide 3-Flute Drill, Stub Model, Regular
        • Volume Discount

        MISUMI

        TiAlN Coated Carbide 3-Flute Drill, Stub Model, Regular

        3-flute drill with outstanding afferent * If the chip flow is not good, perform the appropriate step process depending on the chip flow condition
        Czytaj dalej
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        2 ~ 1312 ~ 77Stainless Steel[○]Carbide46 ~ 124End Mill ShankAvailableTiAlNN/A
        Cena (bez VAT) od:
        60.30 €
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • TiAlN Coated Carbide Double Margin Drill, Regular
        • Volume Discount

        MISUMI

        TiAlN Coated Carbide Double Margin Drill, Regular

        [Features] -Providing 4 edges on the outer circumference of the drill improves guiding performance during chamfering and penetration, enabling very straight and stable drilling-Supports a wide range of materials, from general steel to stainless steel-The combination of superfine carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
        Czytaj dalej
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        1 ~ 1112 ~ 71Stainless Steel[○]Carbide45 ~ 118End Mill ShankAvailableTiAlNN/A
        Cena (bez VAT) od:
        81.68 €
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Regular
        • Volume Discount

        MISUMI

        TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Regular

        By applying three rake + R thinning, it demonstrates a high level of afferent.
        Czytaj dalej
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        3 ~ 1328 ~ 77Stainless Steel[○]Carbide66 ~ 124End Mill ShankAvailableTiAlNN/A
        Cena (bez VAT) od:
        51.31 €
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • TiAlN Coated Carbide Drill with Corner Radius, Straight Shank / Stub Model, Regular
        • Volume Discount

        MISUMI

        TiAlN Coated Carbide Drill with Corner Radius, Straight Shank / Stub Model, Regular

        [Features] -Corner radius treatment suppresses chipping-Wavy flute shape achieves excellent cutting sharpness and strength and promotes chip flow-High centripetal force is achieved by using three chip and R thinning-Combination of ultra-fine grain carbide alloy + TiAlN coating provides excellent abrasion resistance and enables high speed machining-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.
        Czytaj dalej
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        3 ~ 1316 ~ 77Stainless Steel[○]Carbide49 ~ 124Straight ShankAvailableTiAlNN/A
        Cena (bez VAT) od:
        40.76 €
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Stub
        • Volume Discount

        MISUMI

        TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Stub

        [Features] -Capable of high feed and high speed cutting from general steel to stainless steel-The adoption of a corrugated cutting edge achieves excellent sharpness and strength and promotes chip evacuation-. High-speed cutting is achieved by maintaining outstanding strength and stability through the adoption of a tapered shape + R-type thinning-Suppresses chipping through the adoption of a bevel edge treatment on the shoulder-Through the adoption of a diameter-plus tolerance, it is effective for high-precision hole machining closer to hole tolerance
        Czytaj dalej
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        3 ~ 820 ~ 41Stainless Steel[○]Carbide62 ~ 79End Mill ShankAvailableTiAlNN/A
        Cena (bez VAT) od:
        40.39 €
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Regular
        • Volume Discount

        MISUMI

        TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Regular

        [Features] -Capable of high feed and high speed cutting from general steel to stainless steel-The adoption of a wavy edge achieves outstanding sharpness and strength and promotes chip evacuation-. High-speed cutting is achieved by maintaining outstanding strength and stability through the adoption of a tapered shape and R-type thinning-Suppresses chipping through the adoption of a bevel-edge treatment on the shoulder-Through the adoption of a diameter-plus tolerance, it is effective for high-precision hole machining closer to hole tolerance
        Czytaj dalej
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        3 ~ 1328 ~ 77Stainless Steel[○]Carbide66 ~ 124End Mill ShankAvailableTiAlNN/A
        Cena (bez VAT) od:
        47.83 €
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • TiAlN Coated Carbide High-Speed High-Feed Machining Drill, With Oil Holes / Stub, Regular
        • Volume Discount

        MISUMI

        TiAlN Coated Carbide High-Speed High-Feed Machining Drill, With Oil Holes / Stub, Regular

        [Features] -Internal lubrication efficiently evacuates chips and improves tool life-Capable of high feed and high speed cutting from general steel to stainless steel-Adopting a corrugated cutting edge achieves excellent sharpness and strength, and promotes chip evacuation-High-speed cutting is achieved by maintaining excellent strength and stability by adopting tapered shape and R-type thinning-Suppresses chipping by adopting chamfer treatment on the shoulder-By adopting diameter plus tolerance, it is effective for high-precision finishing of holes closer to hole tolerance
        Czytaj dalej
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        4.2 ~ 724 ~ 53Stainless Steel[○]Carbide66 ~ 91End Mill ShankAvailableTiAlNAvailable
        Cena (bez VAT) od:
        107.05 €
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • TiAlN Coated Carbide Drill for Stainless Steel Machining, Composite Spiral / Regular
        • Volume Discount

        MISUMI

        TiAlN Coated Carbide Drill for Stainless Steel Machining, Composite Spiral / Regular

        [Features] -MIAutomatic steelI-Original shape ideal for EN 1.4016 Equiv. machining-Designed with a helix angle of 38° near the tip and 20° near the shank-The 20° section has a large core diameter for improved tool durability-Superfine carbide alloy provides excellent abrasion resistance and enables high speed machining-125° tip angle and combined helix angle improve cutting performance.
        Czytaj dalej
        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
        3 ~ 1028 ~ 61Stainless Steel[◎]Carbide60 ~ 120End Mill ShankAvailableTiAlNN/A
        Cena (bez VAT) od:
        117.87 €
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • Aqua Drill EX Oil Hole 5D AQDEXOH5D

          NACHI(FUJIKOSHI)

          Aqua Drill EX Oil Hole 5D AQDEXOH5D

          Stable wet machining, can be MQL machining. For high efficiency drilling up to 5 times the drill diameter.
          Czytaj dalej
          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
          2.5 ~ 8.720 ~ 72Stainless Steel[◎]Carbide68 ~ 127End Mill Shank / Straight ShankAvailableOtherAvailable
          Cena (bez VAT) od:
          116.24 €
          Standardowa data wysyłki:
          6 dni robocze
          Konfiguruj
        • Aqua Drill Regular AQDR
          • Volume Discount

          NACHI(FUJIKOSHI)

          Aqua Drill Regular AQDR

          Well suited for high speed / long life machining of materials ranging from green timber to high hardness steel. Drill capable of dry machining.
          Czytaj dalej
          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
          3.7 ~ 1024 ~ 60Stainless Steel[○]Carbide56 ~ 110End Mill Shank / Straight ShankAvailableOtherN/A
          Cena (bez VAT) od:
          84.41 €
          Standardowa data wysyłki:
          6 dni robocze
          Konfiguruj
        • Aqua Drill EX Regular AQDEXR

            NACHI(FUJIKOSHI)

            Aqua Drill EX Regular AQDEXR

            Super general-use drill capable of stable high efficiency machining in a range from medium low speed to high speed applications.
            Czytaj dalej
            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
            2.9 ~ 1519 ~ 91Stainless Steel[○]Carbide49 ~ 153End Mill Shank / Straight ShankAvailableOtherN/A
            Cena (bez VAT) od:
            108.81 €
            Standardowa data wysyłki:
            6 dni robocze
            Konfiguruj
          • Aqua Micro Drill AQMD
            • ZNIŻKA
            • Volume Discount

            NACHI(FUJIKOSHI)

            Aqua Micro Drill AQMD

            Capable of stable drilling of small diameter holes. Well suited for machining of materials ranging from green timber to high hardness steel.
            Czytaj dalej
            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
            0.21 ~ 1.72.5 ~ 15Stainless Steel[◎]Carbide38 ~ 47End Mill ShankAvailableOtherN/A
            Cena (bez VAT) od:
            38.11 €
            Cena specjalna
            Standardowa data wysyłki:
            Towar dostępny w magazynie: 1 dzień roboczy
            Niektóre pozycje mogą zostać wysłane tego samego dnia
            Konfiguruj
          • Aqua Drill EX Stub AQDEXS
            • Volume Discount

            NACHI(FUJIKOSHI)

            Aqua Drill EX Stub AQDEXS

            Super general-use drill capable of stable high efficiency machining in a range from medium low speed to high speed applications.
            Czytaj dalej
            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
            2.1 ~ 1310 ~ 49Stainless Steel[○]Carbide45 ~ 100End Mill Shank / Straight ShankAvailableOther-
            Cena (bez VAT) od:
            92.06 €
            Standardowa data wysyłki:
            6 dni robocze
            Konfiguruj
          • Aqua Drill EX Oil Hole 3D AQDEXOH3D

              NACHI(FUJIKOSHI)

              Aqua Drill EX Oil Hole 3D AQDEXOH3D

              Stable wet machining, can be MQL machining. For high efficiency drilling up to 3 times the drill diameter.
              Czytaj dalej
              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
              735Stainless Steel[◎]Carbide88Straight ShankAvailableOtherAvailable
              Cena (bez VAT) od:
              133.03 €
              Standardowa data wysyłki:
              6 dni robocze
              Konfiguruj
            • Aqua Drill EX Oil Hole 8D AQDEXOH8D

                NACHI(FUJIKOSHI)

                Aqua Drill EX Oil Hole 8D AQDEXOH8D

                Stable wet machining, can be MQL machining. For high efficiency drilling up to 8 times the drill diameter.
                Czytaj dalej
                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                5.666Stainless Steel[◎]Carbide118End Mill ShankAvailableOtherAvailable
                Cena (bez VAT) od:
                167.41 €
                Standardowa data wysyłki:
                6 dni robocze
                Konfiguruj
              • Aqua Drill Stub AQDS

                  NACHI(FUJIKOSHI)

                  Aqua Drill Stub AQDS

                  Well suited for high speed / long life machining of materials ranging from green timber to high hardness steel. Drill capable of dry machining.
                  Czytaj dalej
                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                  4 ~ 12.522 ~ 51Stainless Steel[○]Carbide54 ~ 110End Mill Shank / Straight ShankAvailableOtherN/A
                  Cena (bez VAT) od:
                  53.04 €
                  Standardowa data wysyłki:
                  6 dni robocze
                  Konfiguruj
                • Carbide, Very Small Diameter Drill 10D Type, UVM-DRL-10D

                    OSG

                    Carbide, Very Small Diameter Drill 10D Type, UVM-DRL-10D

                    By using carbide materials, it has high hardness and high modulus of elasticity, which enables drilling of extremely small holes in general steel, heat-treated steel and high hardness steel.
                    Czytaj dalej
                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                    0.02 ~ 0.080.22 ~ 0.88Stainless Steel[◎]Carbide38End Mill ShankAvailableOtherN/A
                    Cena (bez VAT) od:
                    106.94 €
                    Standardowa data wysyłki:
                    6 dni robocze
                    Konfiguruj
                  • Carbide, Very Small Diameter Drill 5D Type, UVM-DRL-5D

                      OSG

                      Carbide, Very Small Diameter Drill 5D Type, UVM-DRL-5D

                      UVM ultra-small diameter drill, type 5D, for holes with a minimum diameter of ø0.02.
                      Czytaj dalej
                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                      0.02 ~ 0.080.12 ~ 0.48Stainless Steel[◎]Carbide38End Mill ShankAvailableOtherN/A
                      Cena (bez VAT) od:
                      91.21 €
                      Standardowa data wysyłki:
                      6 dni robocze
                      Konfiguruj
                    • Carbide Very Small Diameter Drill Leading Drill UVM-LDS

                        OSG

                        Carbide Very Small Diameter Drill Leading Drill UVM-LDS

                        Collaboration with UVM-DRL enables high precision drilling
                        Czytaj dalej
                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                        0.050.075Stainless Steel[◎]Carbide38End Mill ShankAvailableOtherN/A
                        Cena (bez VAT) od:
                        153.29 €
                        Standardowa data wysyłki:
                        6 dni robocze
                        Konfiguruj
                      • UTDSX UT Micro Coat, Unimax Drill, Short Blade

                          UNION TOOL

                          UTDSX UT Micro Coat, Unimax Drill, Short Blade

                          [Features]· Coated carbide drill for mass-produced parts and prototype parts, balancing performance and cost.· Adopts a newly developed UT micro-coating that demonstrates high performance for soft materials· The newly designed drill shape and X-thinning provide improved impact fracture resistance and reduced variation when drilling multiple holes· The tip angle is set to 130° to suppress the burr height in through holes· A high rigidity short blade is optimal for high precision machining and also for pilot hole processing
                          Czytaj dalej
                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                          0.3 ~ 21.5 ~ 10Stainless Steel[○]Carbide38End Mill ShankAvailableTiCNN/A
                          Cena (bez VAT) od:
                          19.21 €
                          Standardowa data wysyłki:
                          6 dni robocze
                          Konfiguruj
                        • NSMD Micro Drills
                          • ZNIŻKA
                          • Volume Discount

                          NS TOOL

                          NSMD Micro Drills

                          Realizes standardization from tip diameter φ 0.01. Pioneering a New Area for Hole Drilling with Drills
                          Czytaj dalej
                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                          0.01 ~ 0.10.1 ~ 1Stainless Steel[○]Carbide40End Mill ShankAvailableTiAlNN/A
                          Cena (bez VAT) od:
                          48.72 €
                          Cena specjalna
                          Standardowa data wysyłki:
                          Towar dostępny w magazynie: 1 dzień roboczy
                          Niektóre pozycje mogą zostać wysłane tego samego dnia
                          Konfiguruj
                        • NSMD-S Micro Drill, Short

                            NS TOOL

                            NSMD-S Micro Drill, Short

                            A short type with groove length 6 times the blade diameter, capable of stable machining
                            Czytaj dalej
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            0.01 ~ 0.050.06 ~ 0.3Stainless Steel[○]Carbide40End Mill ShankN/A-N/A
                            Cena (bez VAT) od:
                            115.66 €
                            Standardowa data wysyłki:
                            6 dni robocze
                            Konfiguruj
                          • MSDH Drill for Small Diameter High-Hardness Processing
                            • Volume Discount

                            NS TOOL

                            MSDH Drill for Small Diameter High-Hardness Processing

                            Allows drilling into 65 HCR quenched steel with small diameter drills. Achieves low variation in hole diameter and stable long product life.
                            Czytaj dalej
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            0.1 ~ 10.2 ~ 2Stainless Steel[◎]Carbide45End Mill ShankAvailableTiAlNN/A
                            Cena (bez VAT) od:
                            57.89 €
                            Standardowa data wysyłki:
                            6 dni robocze
                            Konfiguruj
                          • NSMD-M MUGEN Micro Coating Micro Drill
                            • Volume Discount

                            NS TOOL

                            NSMD-M MUGEN Micro Coating Micro Drill

                            With thin film coating dedicated for micro drills, it shows excellent performance when drilling stainless steel, etc.
                            Czytaj dalej
                            Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                            0.01 ~ 0.10.1 ~ 1Stainless Steel[◎]Carbide40End Mill ShankAvailableTiAlNN/A
                            Cena (bez VAT) od:
                            63.40 €
                            Standardowa data wysyłki:
                            6 dni robocze
                            Konfiguruj
                          • NSMD-MS MUGEN Micro Coating Micro Drill Short

                              NS TOOL

                              NSMD-MS MUGEN Micro Coating Micro Drill Short

                              With thin film coating dedicated for micro drills, it shows excellent performance when drilling stainless steel, etc.
                              Czytaj dalej
                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                              0.01 ~ 0.050.06 ~ 0.3Stainless Steel[◎]Carbide40End Mill ShankAvailableTiAlNN/A
                              Cena (bez VAT) od:
                              125.75 €
                              Standardowa data wysyłki:
                              6 dni robocze
                              Konfiguruj
                            • NSPD-M MUGEN Micro Coating Micro Point Drill (for Pilot Hole Machining)
                              • Volume Discount

                              NS TOOL

                              NSPD-M MUGEN Micro Coating Micro Point Drill (for Pilot Hole Machining)

                              With thin film coating dedicated for micro drills, it shows excellent performance when drilling stainless steel, etc.
                              Czytaj dalej
                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                              0.01 ~ 0.10.015 ~ 0.2Stainless Steel[◎]Carbide40End Mill ShankAvailableTiAlNN/A
                              Cena (bez VAT) od:
                              63.40 €
                              Standardowa data wysyłki:
                              6 dni robocze
                              Konfiguruj
                            • MUGEN-COATING Miniature Drill MDR-R
                              • Volume Discount

                              NS TOOL

                              MUGEN-COATING Miniature Drill MDR-R

                              High precision specification ideal for precision parts machining. Diameter tolerance 0 to -0.005 mm
                              Czytaj dalej
                              Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                              .0.4 ~ 11.2 ~ 10Stainless Steel[◎]Carbide38End Mill ShankAvailableTiAlN-
                              Cena (bez VAT) od:
                              27.64 €
                              Standardowa data wysyłki:
                              6 dni robocze
                              Konfiguruj
                            • Carbide Drill Phoenix Drill

                                OSG

                                Carbide Drill Phoenix Drill

                                Indexable drill that achieves high machining efficiency and excellent chip disposal Provides excellent economy due to the 4-corner insert.
                                Czytaj dalej
                                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                14 ~ 4042 ~ 120Stainless Steel[◎]Carbide116 ~ 227End Mill Shank / Straight ShankN/ANon-CoatedN/A
                                Cena (bez VAT) od:
                                411.20 €
                                Standardowa data wysyłki:
                                6 dni robocze
                                Konfiguruj
                              • GP Drill Regular 10D ALT Coating
                                • Volume Discount

                                IWATA TOOL

                                GP Drill Regular 10D ALT Coating

                                Allows non-step boring up to 3D hole depth (up to 7D in some situations). High precision and super long life.
                                Czytaj dalej
                                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                0.3 ~ 33.7 ~ 36.5Stainless Steel[○]Carbide40 ~ 60End Mill ShankAvailableTiAlNN/A
                                Cena (bez VAT) od:
                                45.63 €
                                Standardowa data wysyłki:
                                6 dni robocze
                                Konfiguruj
                              • Solid Semi-Long Drill
                                • ZNIŻKA
                                • Volume Discount

                                ATOM

                                Solid Semi-Long Drill

                                A high-quality general-purpose drill which can support a wide range of materials, from steel/non-ferrous to resin. Versatile type that allows high performance to be achieved not only in high-speed cutting but also in low-speed cutting.
                                Czytaj dalej
                                Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                0.3 ~ 138 ~ 70Stainless Steel[○]Carbide40 ~ 149Straight ShankN/ANon-CoatedN/A
                                Cena (bez VAT) od:
                                19.59 €
                                Cena specjalna
                                Standardowa data wysyłki:
                                Towar dostępny w magazynie: 1 dzień roboczy
                                Niektóre pozycje mogą zostać wysłane tego samego dnia
                                Konfiguruj
                              • Micro Drill Short Tip

                                  ATOM

                                  Micro Drill Short Tip

                                  A drill for precision multiporous machining. Supports a wide range of applications, from general steel to nonferrous metals and resins.
                                  Czytaj dalej
                                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                  0.1 ~ 30.6 ~ 12Stainless Steel[○]Carbide38End Mill ShankN/ANon-CoatedN/A
                                  Cena (bez VAT) od:
                                  28.74 €
                                  Standardowa data wysyłki:
                                  6 dni robocze
                                  Konfiguruj
                                • Micro Drill Long Tip
                                  • ZNIŻKA
                                  • Volume Discount

                                  ATOM

                                  Micro Drill Long Tip

                                  Small diameter, deep hole machining drill. (Min. diameter φ0.03), Can be used for a wide range of applications including general steel, non-ferrous metals, and resins.
                                  Czytaj dalej
                                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                  0.03 ~ 30.6 ~ 40Stainless Steel[○]Carbide38 ~ 65End Mill ShankN/ANon-CoatedN/A
                                  Cena (bez VAT) od:
                                  38.88 €
                                  Cena specjalna
                                  Standardowa data wysyłki:
                                  Towar dostępny w magazynie: 1 dzień roboczy
                                  Niektóre pozycje mogą zostać wysłane tego samego dnia
                                  Konfiguruj
                                • Small Diameter Spiral Flute, 1 mm Shank
                                  • Volume Discount

                                  ATOM

                                  Small Diameter Spiral Flute, 1 mm Shank

                                  A 1 mm shank drill for precision multiporous machining.
                                  Czytaj dalej
                                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                  0.05 ~ 0.990.5 ~ 9.5Stainless Steel[○]Carbide30End Mill ShankN/ANon-CoatedN/A
                                  Cena (bez VAT) od:
                                  18.99 €
                                  Standardowa data wysyłki:
                                  6 dni robocze
                                  Konfiguruj
                                • OK Coat Carbide NC Point Drill SNPDA
                                  • Volume Discount

                                  OKAZAKI SEIKO

                                  OK Coat Carbide NC Point Drill SNPDA

                                  A point drill bit optimal for chamfering or positioning when drilling.
                                  Czytaj dalej
                                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                  3 ~ 128 ~ 30Stainless Steel[○]Carbide50 ~ 110Straight ShankAvailableTiAlNN/A
                                  Cena (bez VAT) od:
                                  37.46 €
                                  Standardowa data wysyłki:
                                  6 dni robocze
                                  Konfiguruj
                                • EZ Drill (for 3D) EZDM Type
                                  • Volume Discount

                                  DIJET

                                  EZ Drill (for 3D) EZDM Type

                                  It is a tool with excellent abrasion resistance.
                                  Czytaj dalej
                                  Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                  11.1 ~ 15.958 ~ 80Stainless Steel[◎]Carbide122 ~ 146End Mill ShankAvailableTiCNAvailable
                                  Cena (bez VAT) od:
                                  245.97 €
                                  Standardowa data wysyłki:
                                  8 dni robocze
                                  Konfiguruj
                                • EZ Drill (for 5D) EZDL Type

                                    DIJET

                                    EZ Drill (for 5D) EZDL Type

                                    It can handle a wide range of materials, from general steel to stainless steel and heat-resistant alloys, and has a structure that allows smooth chip flow and easy resharpening.
                                    Czytaj dalej
                                    Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                    11.1 ~ 15.992 ~ 128Stainless Steel[◎]Carbide158 ~ 194End Mill ShankAvailableTiCNAvailable
                                    Cena (bez VAT) od:
                                    281.35 €
                                    Standardowa data wysyłki:
                                    8 dni robocze
                                    Konfiguruj
                                  • F1 Drill DX-SFDM Type

                                      DIJET

                                      F1 Drill DX-SFDM Type

                                      It features stable machinability and long tool life, and enables highly efficient machining. As it is made of TiCN material, it is abrasion resistant, corrosion resistant, heat resistant and has low friction properties.
                                      Czytaj dalej
                                      Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                      16.5 ~ 20112 ~ 114Stainless Steel[○]Carbide167 ~ 179Straight ShankAvailableTiCNN/A
                                      Cena (bez VAT) od:
                                      325.53 €
                                      Standardowa data wysyłki:
                                      8 dni robocze
                                      Konfiguruj
                                    • F1 Reamer DX-DHSR Type

                                        DIJET

                                        F1 Reamer DX-DHSR Type

                                        It is a tool with excellent abrasion resistance.
                                        Czytaj dalej
                                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                        3 ~ 1220 ~ 50Stainless Steel[○]-70 ~ 135End Mill Shank / Straight ShankAvailableTiCNAvailable
                                        Cena (bez VAT) od:
                                        221.19 €
                                        Standardowa data wysyłki:
                                        8 dni robocze
                                        Konfiguruj
                                      • End Mill Shank Type 3 x D RT100U 5514
                                        • Volume Discount

                                        GUHRING

                                        End Mill Shank Type 3 x D RT100U 5514

                                        [Features]· Supports a wide range of machining and enables high-efficiency, high-speed machining.
                                        Czytaj dalej
                                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                        3 ~ 2020 ~ 79Stainless Steel[○]Carbide62 ~ 131End Mill ShankAvailableOtherN/A
                                        Cena (bez VAT) od:
                                        90.09 €
                                        Standardowa data wysyłki:
                                        6 dni robocze
                                        Konfiguruj
                                      • End Mill Shank Drill 3 × D, with Oil Hole RT100U 5510
                                        • Volume Discount

                                        GUHRING

                                        End Mill Shank Drill 3 × D, with Oil Hole RT100U 5510

                                        [Features]· Internal lubrication enables high performance drilling without steps.
                                        Czytaj dalej
                                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                        3 ~ 2020 ~ 79Stainless Steel[○]Carbide62 ~ 131End Mill ShankAvailableOtherAvailable
                                        Cena (bez VAT) od:
                                        117.85 €
                                        Standardowa data wysyłki:
                                        6 dni robocze
                                        Konfiguruj
                                      • End Mill Shank Type 5xD RT100U 5515
                                        • Volume Discount

                                        GUHRING

                                        End Mill Shank Type 5xD RT100U 5515

                                        [Features]· Supports a wide range of machining and enables high-efficiency, high-speed machining.
                                        Czytaj dalej
                                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                        3 ~ 2028 ~ 101Stainless Steel[○]Carbide66 ~ 153End Mill ShankAvailableOtherN/A
                                        Cena (bez VAT) od:
                                        105.48 €
                                        Standardowa data wysyłki:
                                        6 dni robocze
                                        Konfiguruj
                                      • End Mill Shank Drill 5 × D with Oil Hole RT100U 5511
                                        • Volume Discount

                                        GUHRING

                                        End Mill Shank Drill 5 × D with Oil Hole RT100U 5511

                                        [Features]· Internal lubrication enables high performance drilling without steps.
                                        Czytaj dalej
                                        Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                        3 ~ 2028 ~ 101Stainless Steel[○]Carbide66 ~ 153End Mill ShankAvailableOtherAvailable
                                        Cena (bez VAT) od:
                                        111.73 €
                                        Standardowa data wysyłki:
                                        6 dni robocze
                                        Konfiguruj
                                      • End Mill Shank Drill 7 x D with Oil Hole RT100U 5512

                                          GUHRING

                                          End Mill Shank Drill 7 x D with Oil Hole RT100U 5512

                                          Internal lubrication enables high performance drilling without steps.
                                          Czytaj dalej
                                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                          3 ~ 2030 ~ 190Stainless Steel[○]Carbide70 ~ 244End Mill ShankAvailableOtherAvailable
                                          Cena (bez VAT) od:
                                          161.89 €
                                          Standardowa data wysyłki:
                                          8 dni robocze
                                          Konfiguruj
                                        • Straight Shank Drill, 3 × D Type N 730
                                          • ZNIŻKA
                                          • Volume Discount

                                          GUHRING

                                          Straight Shank Drill, 3 × D Type N 730

                                          [Features]· Highly versatile carbide solid drill.· Supports various workpiece materials such as aluminum or general steel.
                                          Czytaj dalej
                                          Hole diameter (drill diameter) D(mm)Groove Length L(mm)work materialTool Material TypeOverall Length L(mm)Shank TypeCoating Y/NCoating TypeWith/without Oil Hole
                                          0.5 ~ 163 ~ 58Stainless Steel[◎]Carbide20 ~ 115Straight ShankN/A-N/A
                                          Cena (bez VAT) od:
                                          17.19 €
                                          Cena specjalna
                                          Standardowa data wysyłki:
                                          Towar dostępny w magazynie: 1 dzień roboczy
                                          Niektóre pozycje mogą zostać wysłane tego samego dnia
                                          Konfiguruj