Rejestracja

Tłumaczymy nasz sklep na język polski!

Wymaga to jednak czasu, ponieważ w ofercie mamy dużo artykułów, a na nasz sklep składa się wiele stron. Chwilowo nasz katalog produktów dostępny będzie w języku angielskim. Dziękujemy za cierpliwość!
Warunki filtrowania

Wyczyść wszystko

  • Stan magazynowy
  • Blade diameter (D)(φ)
  • work material
  • Blade length (ℓ)(mm)
    [4–60/1mm jedn.]
  • Number of flutes(sheet)
  • Type
  • Coating
  • Square End Mills (Carbide) (Torsion Angle (θ): Standard Helix (30˚ to 40˚))

      • XAL series carbide square end mill, 2-flute / 3D Flute Length model
        • Volume Discount
        • XAL
        • General Steel
        • 2 Flutes

        MISUMI

        XAL series carbide square end mill, 2-flute / 3D Flute Length model

        The Misumi's unique lineup of fine flute length is available at attractive low prices
        Czytaj dalej
        Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
        0.1 ~ 20General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○]0.3 ~ 602SquareFor General Steels (AlCrN, etc.)3 ~ 2040 ~ 110-
        Cena (bez VAT) od:
        9.61 €
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • TSC series carbide square end mill, 4-flute / 3D Flute Length (regular) model
        • Volume Discount
        • TS
        • General Steel
        • 4 Flutes
        • R (Regular)

        MISUMI

        TSC series carbide square end mill, 4-flute / 3D Flute Length (regular) model

        [Features] -The cutter shows high performance in machining general steel, EN 1.4301 Equiv. (sintered) and quenched and tempered steel (up to 50 HRC)-All-purpose cutter with 4 cutting edges for a wide range of applications-Optimal for machining in the low to medium speed range due to the general-purpose helix angle of 30°-The coating shows high oxidation resistance and high hardness and achieves a long tool life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
        Czytaj dalej
        Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
        1 ~ 20General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]3 ~ 604SquareFor High Hardness (Silicon Group)4 ~ 2045 ~ 13023 ~ 92
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • WXL-Coated 2-Flute 2D Flute Length Type WXL-2D-DE
        • ZNIŻKA
        • Volume Discount

        OSG

        WXL-Coated 2-Flute 2D Flute Length Type WXL-2D-DE

        [Features]· 2-flute end mill coated with WXL hard lubricating film coating. Proven cutting performance on not only steel but also copper alloys. Recommended for both wet-type and dry-type milling.
        Czytaj dalej
        Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
        0.1 ~ 30General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]0.2 ~ 602SquareFor General Steels (AlCrN, etc.)4 ~ 3245 ~ 140-
        Cena (bez VAT) od:
        25.40 €
        Cena specjalna
        Standardowa data wysyłki:
        Towar dostępny w magazynie: 1 dzień roboczy
        Niektóre pozycje mogą zostać wysłane tego samego dnia
        Konfiguruj
      • TSC series carbide square end mill, 2-flute / 3D Flute Length (regular) model
        • Volume Discount
        • TS
        • General Steel
        • 2 Flutes
        • R (Regular)

        MISUMI

        TSC series carbide square end mill, 2-flute / 3D Flute Length (regular) model

        [Features] -Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)-Regular 2-groove size that can be used for a wide range of applications-Optimal for low to medium speed machining due to the universal 30° helix angle-It is equipped with a coating with high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, performance range, prices, etc.
        Czytaj dalej
        Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
        0.2 ~ 20General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.6 ~ 602SquareFor High Hardness (Silicon Group)3 ~ 2040 ~ 13023 ~ 92
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • XAL Series Carbide Square End Mill, 2-Flute / 4D Flute Length (Long) Model
        • Volume Discount
        • XAL
        • General Steel
        • 2 Flutes

        MISUMI

        XAL Series Carbide Square End Mill, 2-Flute / 4D Flute Length (Long) Model

        A long flute length type that supports deep engraving
        Czytaj dalej
        Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
        0.5 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○]2 ~ 482SquareFor General Steels (AlCrN, etc.)4 ~ 1245 ~ 100-
        Cena (bez VAT) od:
        12.36 €
        Standardowa data wysyłki:
        5 dni robocze
        Konfiguruj
      • GSX MILL 4-Flute Blade 2D GSX4C-2D
        • Volume Discount

        NACHI(FUJIKOSHI)

        GSX MILL 4-Flute Blade 2D GSX4C-2D

        Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
        3 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]6 ~ 244SquareFor General Steels (AlCrN, etc.)6 ~ 1245 ~ 75-
        Cena (bez VAT) od:
        34.14 €
        Standardowa data wysyłki:
        6 dni robocze
        Konfiguruj
      • Champion Solid, End Mill NC-2
        • Volume Discount

        NS TOOL

        Champion Solid, End Mill NC-2

        General purpose type with 2x blade length
        Czytaj dalej
        Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
        0.5 ~ 6General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]1 ~ 122SquareNon-Coated3 ~ 635 ~ 55-
        Cena (bez VAT) od:
        56.97 €
        Standardowa data wysyłki:
        6 dni robocze
        Konfiguruj
      • Coated (TiAIN) Solid Carbide End Mills (4 Flutes) IC4SSV

          THE CUT

          Coated (TiAIN) Solid Carbide End Mills (4 Flutes) IC4SSV

          [Features]· Gash land· Outstanding cost performance.· Capable of machining a wide range of workpieces from raw materials up to alloy steel.· TiAlN coated for a longer tool life.
          Czytaj dalej
          Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
          11General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○]304SquareTiAlN1275-
          Cena (bez VAT) od:
          68.61 €
          Standardowa data wysyłki:
          6 dni robocze
          Konfiguruj
        • TSC series carbide square end mill, 2-flute / 1.5D Flute Length (stub) model
          • Volume Discount
          • TS
          • General Steel
          • 2 Flutes
          • B (Stub)

          MISUMI

          TSC series carbide square end mill, 2-flute / 1.5D Flute Length (stub) model

          [Features] -Provides high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)-Suitable for high-speed machining with flute length 1.5 times the cutting edge diameter-Optimal for low to medium speed machining due to universal 30° helix angle-it has a coating with high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
          Czytaj dalej
          Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
          0.5 ~ 20General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.75 ~ 302SquareFor High Hardness (Silicon Group)4 ~ 2040 ~ 105-
          Cena (bez VAT) od:
          13.35 €
          Standardowa data wysyłki:
          5 dni robocze
          Konfiguruj
        • Carbide Square End Mill, 2-Flute / 0.01 mm Designation Model
          • Volume Discount
          • Non-Coated
          • General Steel
          • 2 Flutes

          MISUMI

          Carbide Square End Mill, 2-Flute / 0.01 mm Designation Model

          The blade diameter of 0.01 mm increments can be selected from the extensive variations of flute length
          Czytaj dalej
          Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
          3.15 ~ 19.99General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]3.5 ~ 482SquareNon-Coated6 ~ 2040 ~ 105-
          Cena (bez VAT) od:
          34.57 €
          Standardowa data wysyłki:
          7 dni robocze
          Konfiguruj
        • 2-Flute 3D Type WXL-3D-DE
          • ZNIŻKA
          • Volume Discount

          OSG

          2-Flute 3D Type WXL-3D-DE

          2-bladed end mill treated with the high hardness lubricating film WXL coat.ing Effective at grinding copper alloys in addition to steel. Recommended for both wet and dry machining.
          Czytaj dalej
          Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
          0.1 ~ 20General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]0.3 ~ 602SquareFor General Steels (AlCrN, etc.)4 ~ 2045 ~ 130-
          Cena (bez VAT) od:
          25.40 €
          Cena specjalna
          Standardowa data wysyłki:
          Towar dostępny w magazynie: 1 dzień roboczy
          Niektóre pozycje mogą zostać wysłane tego samego dnia
          Konfiguruj
        • 2-Flute, Short, FX-MG-EDS

            OSG

            2-Flute, Short, FX-MG-EDS

            General-purpose 2-flute end-mill with heat resistant FX coating. Supports a wide range of machining.
            Czytaj dalej
            Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
            0.2 ~ 30General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / High Hardness Steel: to HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]0.4 ~ 452SquareTiAlN3 ~ 3240 ~ 125-
            Cena (bez VAT) od:
            52.27 €
            Standardowa data wysyłki:
            6 dni robocze
            Konfiguruj
          • 3-Flute, Short, DLC-ETS

              OSG

              3-Flute, Short, DLC-ETS

              Its own ultra-smooth new DLC coating prevents welding. Achieves high-speed high-efficiency machining in aircraft aluminum parts.
              Czytaj dalej
              Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
              5 ~ 12Aluminum[◎] / Copper[○] / Resin[○]13 ~ 263SquareDLC6 ~ 1250 ~ 75-
              Cena (bez VAT) od:
              62.31 €
              Standardowa data wysyłki:
              6 dni robocze
              Konfiguruj
            • 3-Flute, for Steel / Aluminium Alloy, Short, CA-ETS
              • Volume Discount

              OSG

              3-Flute, for Steel / Aluminium Alloy, Short, CA-ETS

              Great cutting sharpness and wide flutes that removes swarf swiftly contribute to fast, efficient grooving and side surface machining.
              Czytaj dalej
              Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
              3 ~ 8Aluminum[◎] / Copper[◎] / Resin[○]8 ~ 193SquareNon-Coated6 ~ 850 ~ 60-
              Cena (bez VAT) od:
              46.93 €
              Standardowa data wysyłki:
              6 dni robocze
              Konfiguruj
            • NX-35 Lead 35 End Mill
              • Volume Discount

              NS TOOL

              NX-35 Lead 35 End Mill

              The blade length is 3x the blade diameter and the torsion angle is 35°. Features a slightly larger torsion angle than standard torsion and enables high efficiency machining
              Czytaj dalej
              Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
              0.5 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]1.5 ~ 362SquareNon-Coated4 ~ 1240 ~ 85-
              Cena (bez VAT) od:
              42.30 €
              Standardowa data wysyłki:
              6 dni robocze
              Konfiguruj
            • MX230 MUGEN-COATING 2-Flute LEAD 30 End Mill
              • Volume Discount

              NS TOOL

              MX230 MUGEN-COATING 2-Flute LEAD 30 End Mill

              Standard type that can be used with versatility for grooves or sides
              Czytaj dalej
              Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
              0.1 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]0.2 ~ 242SquareTiAlN4 ~ 1245 ~ 80-
              Cena (bez VAT) od:
              17.54 €
              Standardowa data wysyłki:
              6 dni robocze
              Konfiguruj
            • SED2M Medium Square End Mill, 2-Flute, Non-Coated
              • Volume Discount

              OKAZAKI SEIKO

              SED2M Medium Square End Mill, 2-Flute, Non-Coated

              A 2-flute OK coated end mill with semi-long flutes which enable use in slightly deeper machining work.
              Czytaj dalej
              Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
              1 ~ 12General Steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]4 ~ 362SquareNon-Coated4 ~ 1245 ~ 75-
              Cena (bez VAT) od:
              33.40 €
              Standardowa data wysyłki:
              10 dni robocze
              Konfiguruj
            • All Purpose Square End Mill Regular 3-Flute 3560
              • Volume Discount

              GUHRING

              All Purpose Square End Mill Regular 3-Flute 3560

              Machining is possible with a wide range of materials, from raw materials to hardened materials. Excellent cost performance. with the same price as 2-flute blades.
              Czytaj dalej
              Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
              2 ~ 20--3Square-6 ~ 2057 ~ 104-
              Cena (bez VAT) od:
              42.34 €
              Standardowa data wysyłki:
              6 dni robocze
              Konfiguruj
            • 3-Flute Long End Mill For Aluminium Alloys AERO-ETL

                OSG

                3-Flute Long End Mill For Aluminium Alloys AERO-ETL

                [Features]· Maximizes the performance of high-power output machinery. · Ideal for high-efficiency machining of the large-type aluminum parts used in aircraft. · The sharp edges provide excellent cutting performance. (Thin film thickness of 1 μm)
                Czytaj dalej
                Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                12 ~ 20Aluminum[◎]50-SquareDLC12 ~ 20110-
                Cena (bez VAT) od:
                178.80 €
                Standardowa data wysyłki:
                6 dni robocze
                Konfiguruj
              • XAL series carbide square end mill, 2-flute / 2D Flute Length (short) model
                • Volume Discount
                • XAL
                • General Steel
                • 2 Flutes

                MISUMI

                XAL series carbide square end mill, 2-flute / 2D Flute Length (short) model

                The price of the low-cost classic XAL Series has been further reduced!
                Czytaj dalej
                Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                0.1 ~ 20General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]0.2 ~ 402SquareFor General Steels (AlCrN, etc.)3 ~ 2040 ~ 110-
                Cena (bez VAT) od:
                9.33 €
                Standardowa data wysyłki:
                5 dni robocze
                Konfiguruj
              • XAL series carbide square end mill, 4-flute / 2D Flute Length (short) model
                • Volume Discount
                • XAL
                • General Steel
                • 4 Flutes

                MISUMI

                XAL series carbide square end mill, 4-flute / 2D Flute Length (short) model

                Popular XAL Series with the 4-flute structure that's ideal for side milling has been further reduced in price!
                Czytaj dalej
                Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                1 ~ 20General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]2 ~ 404SquareFor General Steels (AlCrN, etc.)4 ~ 2040 ~ 110-
                Cena (bez VAT) od:
                10.86 €
                Standardowa data wysyłki:
                5 dni robocze
                Konfiguruj
              • XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) model
                • Volume Discount
                • XAL
                • General Steel
                • 4 Flutes

                MISUMI

                XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) model

                The Misumi's original fine intermediate flute length is available at a reasonable price
                Czytaj dalej
                Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                1 ~ 20General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]3 ~ 604SquareFor General Steels (AlCrN, etc.)4 ~ 2045 ~ 130-
                Cena (bez VAT) od:
                10.85 €
                Standardowa data wysyłki:
                5 dni robocze
                Konfiguruj
              • XAC series carbide square end mill, 2-flute / short model
                • Volume Discount
                • TiAlN
                • General Steel
                • 2 Flutes
                • S (Short)

                MISUMI

                XAC series carbide square end mill, 2-flute / short model

                [Features] -Standard TiAlN Coating
                Czytaj dalej
                Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                1 ~ 20General Steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]2.5 ~ 382SquareTiAlN4 ~ 2040 ~ 105-
                Cena (bez VAT) od:
                13.92 €
                Standardowa data wysyłki:
                5 dni robocze
                Konfiguruj
              • XAC series carbide square end mill, 4-flute / short model
                • Volume Discount
                • TiAlN
                • General Steel
                • 4 Flutes
                • S (Short)

                MISUMI

                XAC series carbide square end mill, 4-flute / short model

                [Features] -Standard TiAlN coating
                Czytaj dalej
                Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                2 ~ 20General Steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]6 ~ 384SquareTiAlN4 ~ 2040 ~ 105-
                Cena (bez VAT) od:
                15.43 €
                Standardowa data wysyłki:
                5 dni robocze
                Konfiguruj
              • XAC series carbide square end mill, 4-flute / long model
                • Volume Discount
                • TiAlN
                • General Steel
                • 4 Flutes
                • L (Long)

                MISUMI

                XAC series carbide square end mill, 4-flute / long model

                User friendly TiAlN coated series with long flute length
                Czytaj dalej
                Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                3 ~ 12General Steel[○] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]12 ~ 304SquareTiAlN6 ~ 1250 ~ 90-
                Cena (bez VAT) od:
                29.70 €
                Standardowa data wysyłki:
                5 dni robocze
                Konfiguruj
              • TSC series carbide square end mill for shrinkage fitting, 2-flute / 1D Flute Length (stub) model
                • Volume Discount
                • TS
                • General Steel
                • 2 Flutes
                • B (Stub)

                MISUMI

                TSC series carbide square end mill for shrinkage fitting, 2-flute / 1D Flute Length (stub) model

                [Features] -The tool shows high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)-The tool's rigidity is highlighted by shortening the flute length and overall length for shrink fit-Optimal for low to medium speed machining due to the universal 30° helix angle-The tool has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
                Czytaj dalej
                Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                0.5 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.5 ~ 122SquareFor High Hardness (Silicon Group)4 ~ 1240 ~ 65-
                Cena (bez VAT) od:
                13.09 €
                Standardowa data wysyłki:
                5 dni robocze
                Konfiguruj
              • TSC series carbide square end mill, 2-flute / 2D Flute Length (short) model
                • Volume Discount
                • TS
                • General Steel
                • 2 Flutes
                • S (Short)

                MISUMI

                TSC series carbide square end mill, 2-flute / 2D Flute Length (short) model

                [Features] -Provides high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)-All-purpose cutter with 2 cutting edges for a wide range of applications-Optimal for machining in the low to medium speed range due to the general-purpose helix angle of 30°-It has a coating with high oxidation resistance and high hardness and achieves a long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
                Czytaj dalej
                Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                0.1 ~ 20General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.2 ~ 402SquareFor High Hardness (Silicon Group)3 ~ 2035 ~ 11017 ~ 73
                Standardowa data wysyłki:
                5 dni robocze
                Konfiguruj
              • TSC series carbide square end mill, 2-flute / 2.5D Flute Length model
                • Volume Discount
                • TS
                • General Steel
                • 2 Flutes
                • SR

                MISUMI

                TSC series carbide square end mill, 2-flute / 2.5D Flute Length model

                The lineup of fine intermediate flute length between short and regular is available only in Misumi
                Czytaj dalej
                Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                0.5 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]1.25 ~ 302SquareFor High Hardness (Silicon Group)4 ~ 1245 ~ 8520 ~ 55
                Standardowa data wysyłki:
                5 dni robocze
                Konfiguruj
              • TSC series carbide square end mill, 2-flute / 3.5D Flute Length model
                • Volume Discount
                • TS
                • General Steel
                • 2 Flutes
                • RL

                MISUMI

                TSC series carbide square end mill, 2-flute / 3.5D Flute Length model

                Lineups of fine intermediate flute length between regular and long are available only in MISUMI.
                Czytaj dalej
                Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                0.5 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]1.75 ~ 422SquareFor High Hardness (Silicon Group)4 ~ 1245 ~ 9526 ~ 65
                Standardowa data wysyłki:
                5 dni robocze
                Konfiguruj
              • TSC series carbide square end mill, 2-flute / 4D Flute Length (long) model
                • Volume Discount
                • TS
                • General Steel
                • 2 Flutes
                • L (Long)

                MISUMI

                TSC series carbide square end mill, 2-flute / 4D Flute Length (long) model

                [Features] -Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat treated steel (up to 50 HRC)-The 4D flute length supports deep cavity milling-Optimal for low to medium rotation machining due to the universal 30° helix angle-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
                Czytaj dalej
                Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                1 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]4 ~ 482SquareFor High Hardness (Silicon Group)4 ~ 1245 ~ 10029 ~ 76
                Standardowa data wysyłki:
                5 dni robocze
                Konfiguruj
              • TSC series carbide square end mill for shrinkage fitting, 4-flute / 1D Flute Length (stub) model
                • Volume Discount
                • TS
                • General Steel
                • 4 Flutes
                • B (Stub)

                MISUMI

                TSC series carbide square end mill for shrinkage fitting, 4-flute / 1D Flute Length (stub) model

                [Features] -The tool shows high performance in machining general steel, EN 1.4301 Equiv. (sintered) and quenched and tempered steel (up to 50 HRC)-The rigidity of the tool is emphasized by shortening the flute length and overall length for shrink fit-Optimal for low to medium speed machining due to the universal 30° helix angle-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
                Czytaj dalej
                Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                2 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]2 ~ 124SquareFor High Hardness (Silicon Group)4 ~ 1240 ~ 65-
                Cena (bez VAT) od:
                18.32 €
                Standardowa data wysyłki:
                5 dni robocze
                Konfiguruj
              • TSC series carbide square end mill, 4-flute / 1.5D Flute Length (stub) model
                • Volume Discount
                • TS
                • General Steel
                • 4 Flutes
                • B (Stub)

                MISUMI

                TSC series carbide square end mill, 4-flute / 1.5D Flute Length (stub) model

                [Features] -Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)-Suitable for high-speed machining with 1.5 times groove length-Optimal for low to medium speed machining due to universal 30° helix angle-It has a coating with high oxidation resistance and high hardness and achieves long service life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
                Czytaj dalej
                Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                2 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]3 ~ 184SquareFor High Hardness (Silicon Group)4 ~ 1240 ~ 75-
                Cena (bez VAT) od:
                20.56 €
                Standardowa data wysyłki:
                5 dni robocze
                Konfiguruj
              • TSC series carbide square end mill, 4-flute / 2D Flute Length (short) model
                • Volume Discount
                • TS
                • General Steel
                • 4 Flutes
                • S (Short)

                MISUMI

                TSC series carbide square end mill, 4-flute / 2D Flute Length (short) model

                [Features] -The coating shows high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat treated steel (up to 50 HRC)-Optimal for low to medium speed machining due to universal 30° helix angle-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
                Czytaj dalej
                Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                1 ~ 20General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]2 ~ 404SquareFor High Hardness (Silicon Group)4 ~ 2040 ~ 11015 ~ 68
                Standardowa data wysyłki:
                5 dni robocze
                Konfiguruj
              • TSC series carbide square end mill, 4-flute / 2.5D Flute Length model
                • Volume Discount
                • TS
                • General Steel
                • 4 Flutes
                • SR

                MISUMI

                TSC series carbide square end mill, 4-flute / 2.5D Flute Length model

                [Features] -Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)-Slot length is 2.5 times the cutting edge diameter between short and regular flutes-Optimal for machining in low to medium rotation range due to universal 30° helix angle-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
                Czytaj dalej
                Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                1 ~ 16General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]2.5 ~ 404SquareFor High Hardness (Silicon Group)4 ~ 1645 ~ 10519 ~ 73
                Standardowa data wysyłki:
                5 dni robocze
                Konfiguruj
              • TSC series carbide square end mill, 4-flute / 3.5D Flute Length model
                • Volume Discount
                • TS
                • General Steel
                • 4 Flutes
                • RL

                MISUMI

                TSC series carbide square end mill, 4-flute / 3.5D Flute Length model

                [Features] -Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat treated steel (up to 50 HRC)-The flute length is 3.5 times the cutting diameter between the normal flute and the long flute-Optimal for low to medium speed machining due to the universal 30° helix angle-It has a coating with high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
                Czytaj dalej
                Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                1 ~ 16General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]3.5 ~ 564SquareFor High Hardness (Silicon Group)6 ~ 1645 ~ 12026 ~ 88
                Standardowa data wysyłki:
                5 dni robocze
                Konfiguruj
              • TSC series carbide square end mill, 4-flute / 4D Flute Length (long) model
                • Volume Discount
                • TS
                • General Steel
                • 4 Flutes
                • L (Long)

                MISUMI

                TSC series carbide square end mill, 4-flute / 4D Flute Length (long) model

                [Features] -The cutter shows high performance in machining general steel, EN 1.4301 Equiv. (sintered) and quenched and tempered steel (up to 50 HRC)-All-purpose cutter with 4 cutting edges for a wide range of applications-Optimal for machining in the low to medium speed range due to the general-purpose helix angle of 30°-The coating shows high oxidation resistance and high hardness and achieves a long tool life. Effective in high-speed machining and dry machining as coating properties-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
                Czytaj dalej
                Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                1 ~ 12General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]4 ~ 484SquareFor High Hardness (Silicon Group)4 ~ 1245 ~ 10029 ~ 70
                Standardowa data wysyłki:
                5 dni robocze
                Konfiguruj
              • TSC series carbide radius end mill for countersink, 3-flute / short model
                • Volume Discount
                • TS
                • General Steel
                • 3 Flutes
                • S (Short)

                MISUMI

                TSC series carbide radius end mill for countersink, 3-flute / short model

                [Features] -Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)-By leaving the round land width (the width of the cylindrical part without clearance angle at the circumferential groove), it is possible to achieve an effect similar to that of a reamer and improve the surface roughness of the machined surface-The end cutting edge is almost flat, making it ideal for finishing counterbores. -The 3-flute shape suppresses chatter that can occur during drilling and counterboring-Optimal for machining in the low to medium speed range due to the universal 30° helix angle-The coating has high oxidation resistance and high hardness, achieving long life. Effective in high-speed machining and dry machining as coating characteristics.
                Czytaj dalej
                Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                3 ~ 16General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]8 ~ 323SquareFor High Hardness (Silicon Group)6 ~ 1650 ~ 110-
                Cena (bez VAT) od:
                56.23 €
                Standardowa data wysyłki:
                5 dni robocze
                Konfiguruj
              • Carbide square end mill, 2-flute / 2D Flute Length (short) model
                • Volume Discount
                • Non-Coated
                • General Steel
                • 2 Flutes
                • S (Short)

                MISUMI

                Carbide square end mill, 2-flute / 2D Flute Length (short) model

                Excellent in general versatility, it is a 2D flute length type that can be used in a wide range of applications
                Czytaj dalej
                Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                0.2 ~ 12General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.4 ~ 242SquareNon-Coated3 ~ 1235 ~ 7517 ~ 45
                Standardowa data wysyłki:
                5 dni robocze
                Konfiguruj
              • Carbide square end mill, 2-flute / 3D Flute Length (regular) model
                • Volume Discount
                • Non-Coated
                • General Steel
                • 2 Flutes
                • R (Regular)

                MISUMI

                Carbide square end mill, 2-flute / 3D Flute Length (regular) model

                The 3D flute length type that produces high-quality finish supports a wide range of machining areas
                Czytaj dalej
                Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                0.2 ~ 12General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]0.6 ~ 362SquareNon-Coated3 ~ 1240 ~ 8523 ~ 55
                Standardowa data wysyłki:
                5 dni robocze
                Konfiguruj
              • Carbide square end mill, 4-flute / 2D Flute Length (short) model
                • Volume Discount
                • Non-Coated
                • General Steel
                • 4 Flutes
                • S (Short)

                MISUMI

                Carbide square end mill, 4-flute / 2D Flute Length (short) model

                The 2D flute length type with high versatility achieves high-precision processing including grooving
                Czytaj dalej
                Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                1 ~ 20General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]2 ~ 404SquareNon-Coated4 ~ 2040 ~ 11017 ~ 73
                Standardowa data wysyłki:
                5 dni robocze
                Konfiguruj
              • Carbide square end mill, 4-flute / 3D Flute Length (regular) model
                • Volume Discount
                • Non-Coated
                • General Steel
                • 4 Flutes
                • R (Regular)

                MISUMI

                Carbide square end mill, 4-flute / 3D Flute Length (regular) model

                The 3D flute length type that's capable of sophisticated grooving is also known for the producing the high-quality finish
                Czytaj dalej
                Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                2 ~ 20General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]5 ~ 604SquareNon-Coated4 ~ 2045 ~ 13023 ~ 92
                Standardowa data wysyłki:
                5 dni robocze
                Konfiguruj
              • Carbide square end mill, 4-flute / 4D Flute Length (long) model
                • Volume Discount
                • Non-Coated
                • General Steel
                • 4 Flutes
                • L (Long)

                MISUMI

                Carbide square end mill, 4-flute / 4D Flute Length (long) model

                Achieves both high levels of machining precision and reduction of processing time in side milling
                Czytaj dalej
                Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                1 ~ 12General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]4 ~ 484SquareNon-Coated4 ~ 1245 ~ 10029 ~ 70
                Standardowa data wysyłki:
                5 dni robocze
                Konfiguruj
              • TSC Series Carbide Roughing End Mill for Stainless Steel Machining
                • Volume Discount
                • TS
                • SUS
                • 3 Flutes
                • R (Regular)

                MISUMI

                TSC Series Carbide Roughing End Mill for Stainless Steel Machining

                Ideal for the medium-finishing of difficult-to-cut SUS, etc.
                Czytaj dalej
                Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                6 ~ 20General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]15 ~ 503RoughingFor High Hardness (Silicon Group)6 ~ 2060 ~ 130-
                Cena (bez VAT) od:
                84.92 €
                Standardowa data wysyłki:
                5 dni robocze
                Konfiguruj
              • Diamond Coated Carbide Square End Mill for Graphite Machining, 2-Flute / Long Model
                • Volume Discount
                • DIA
                • Graphite
                • 2 Flutes
                • L (Long)

                MISUMI

                Diamond Coated Carbide Square End Mill for Graphite Machining, 2-Flute / Long Model

                The premium diamond coated products are available at the industry's lowest price
                Czytaj dalej
                Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                1 ~ 12Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]5 ~ 602SquareDia Coat4 ~ 1275 ~ 20010 ~ 85
                Cena (bez VAT) od:
                94.44 €
                Standardowa data wysyłki:
                5 dni robocze
                Konfiguruj
              • Carbide Square End Mill for Graphite Machining, 2-Flute / Non-Coated, Long Model
                • Volume Discount
                • Non-Coated
                • Graphite
                • 2 Flutes
                • L (Long)

                MISUMI

                Carbide Square End Mill for Graphite Machining, 2-Flute / Non-Coated, Long Model

                [Features] -Uncoated product with excellent cost efficiency-Deep digging is possible due to long flute length-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.
                Czytaj dalej
                Blade diameter (D)(φ)work materialBlade length (ℓ)(mm)Number of flutes(sheet)TypeCoatingShank diameter (d)(mm)Overall Length (L)(mm)Underneck length (ℓ1)(mm)
                1 ~ 12Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]5 ~ 602SquareNon-Coated4 ~ 1275 ~ 20010 ~ 85
                Cena (bez VAT) od:
                87.14 €
                Standardowa data wysyłki:
                5 dni robocze
                Konfiguruj