Board-To-Board Connectors（Applicable pin/contact：Male (plug)）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
FI Series
JAPAN AVIATION ELECTRONICS(JAE)
[Features]
· Connector for connecting cables to boards with a 1.25-mm pitch for circuit connections inside equipment.
・The single-row model is suitable for thinner devices. The 2-row model (staggered array) is suitable for high-density mounting.
・The circuit board side receptacle is a small, low-profile SMT with a mounting height of 1.8 mm (1-row type) and 3.7 mm (2-row type).
・SMT connection: 1-row type – 1.25-mm pitch; 2-row type – 0.625-mm pitch.
・The receptacle prevents the connector from floating during soldering and is equipped with a hold-down to strengthen the retaining force on the connector's circuit board.
・The cable-side plug has a uniform finish and superior workability for discrete wire crimped-type connectors.
・Includes a reverse-insertion prevention key.
・This is a friction-lock type.
· The receptacles can be supplied with embossed taping to support automatic mounting.- Volume Discount
Configure nowStarting from∗ ： 0.80 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
DIN Standard Compliant Board-to-Board Connector PCN10 Series
HIROSE ELECTRONIC
This is a DIN standard compliant board-to-board connector. Available in a wide variety and supports various connections.- Volume Discount
Configure nowStarting from∗ ： 1.80 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Pin Header with 2.54-mm Pitch (Terminal 1-Row Type), A2 Series
HIROSE ELECTRONIC
2.54-mm pitch pin header terminal 1 row type. Can be arrayed without creating wasted space on 2.54 mm mesh board.
[Features]
· High density: Can be arrayed without creating wasted space on a 2.54 mm mesh board when the connectors are arrayed lengthwise.
· Number of pins variations: A1 series has 16 types from 6 pins to 64 pins and A2 series has 20 types from 1 pin to 20 pins.
· Compatibility: the A1 series is interchangeable with the HIF3B series cable side and HIF3H (receptacle) for a wide range of use.- Volume Discount
Configure nowStarting from∗ ： 0.37 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TX24 / TX25 Series
JAPAN AVIATION ELECTRONICS(JAE)
With an internal machine board-to-board connector, circuit boards can be connected horizontally, parallel, or perpendicularly by joining the receptacle (TX24) and plug (TX25).
[Features]
· A receptacle and plug along with a straight through-hole type and right angle thorough-hole type are available.
· Ribbon-type (flat) contacts are used with a long contact stroke, excellent contact reliability/stability, and resistance to prying once mated.
· The straight through-hole type offers 3 insulator heights and a parallel circuit board gap of 12 to 24 mm (2-m gap).
・Both receptacle (TX24) mating sides have an insulator mating guide, which excels at strong insertion, and is perfect for lock & panel mountings.
・This type has a satisfying ‘click' action when inserting and extracting.
・Hook pin and hook-less types are available to temporarily hold the circuit board while soldering and also prevent the solder from oozing.
・The contact terminal allows for simple circuit board pattern design with a 1.27-mm pitch and 1.905-mm array gap with a 4-row staggered arrangement.- Volume Discount
Configure nowStarting from∗ ： 1.77 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
DIN Connector (4-Row, 128-Contact Type) - XC5 (Multi-Contact)
OMRON
[Features]
・ A multi-pin connector designed with DIN in mind, expanded to include a large number of contacts (4 rows, 128 contacts).
・ The aim is to move to a larger number of contacts while leveraging the best points of DIN connectors.
・ Two types are available for the plug L-shaped terminal: a standard DIN type and a circuit board mounted DIN style type.
・ In order to realize a low insertion force and maintain high reliability, the contact configuration adopts twin contacts.- Volume Discount
Configure nowStarting from∗ ： 20.53 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
FFC Series
HONDA TSUSHIN KOGYO
Connectors for 2.54 mm-pitch board-to-board connections, full product line-up
[Features]
• The FFC series includes highly reliable products with a long record of performance as headers for 2.54 mm-pitch boards. Can be used in a variety of applications.
• Can be used, in combination with the HKP series, as board-to-board or board-to-cable connectors.
• Can be used, in combination with the DIC series, as circuit-switching terminal plates.
• Can select the number of contacts required.
• Many pin lengths are available, so the user can select the appropriate length for a given.
• Select the surface required: gold, tin, or copper.
• Molds come in two colors (black and red).
• Remover pin prevents backwards insertion.- Volume Discount
Configure nowStarting from∗ ： 1.20 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Board-to-Board Connector (0.5-mm Pitch, 4 to 5-mm Height) - FX10 Series
HIROSE ELECTRONIC
[Features]
· Board-to-board connector with a ground plate, height between boards depends on application (4 to 5 mm) and whether or not to use a ground plate is selectable.
Some in-stock items are custom products, therefore returns and cancellations are not possible.- Volume Discount
Configure nowStarting from∗ ： 3.30 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
PS Series SEN Type
JAPAN AVIATION ELECTRONICS(JAE)
[Features]
· A connector for connecting to flat ribbon cables that are used for high-density mountings inside equipment.- Volume Discount
Configure nowStarting from∗ ： 2.65 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Flat Cable Connector (General Purpose Type) - XG4
OMRON
The core of this printed circuit board connector is compliant with MIL standards.
[Features]
· The adoption of a new high-productivity design has delivered both high reliability and low costs.
· A box type plug (XG4C type) that helps save space during installation is also available.
· A press-fit type plug (XG4E type) that can be used as a relay is also available.
· A wide range of installation options are available by combining discrete wire press-fitted/crimped connectors (XG5 type), original plugs (XG8 type), and PCB types (XG2 type).
· The use of the simple and unique locking levers developed by the manufacturer makes it possible to lock original plugs (XG8 type) and box type plugs (XG4C type).
· Complies with MIL standards (MIL-C-83503).
· UL standard (File No.E103202) certified products are used as standard (except for the XG4U and XG4H models).- Volume Discount
Configure nowStarting from∗ ： 1.53 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Board-to-Board Connector with 0.6-mm Pitch and 3 to 4-mm Height, FX8 Series
HIROSE ELECTRONIC
The height between boards can be selected from 3 to 4 mm. Although it is compact, it has a guiding mechanism to improve operability. Can be used for a wide range of equipment.
[Features]
· Stacking height 3 mm to 16 mm compatible.
· Stacking height between boards of 3 mm to 16 mm can be applied.
▪ SMT co‐planarity.
▪ The SMT solder part lead's co-planarity maintains high precision and 0.1 mm max.
· Fit guiding.
· Equipped with latching guiding ribs while being extremely small, the self-alignment tolerance of ±0.6 mm has been given much attention.
· Prevents mis-insertion with circuit boards.
· By placing circuit board positioning screws, mis-insertion to the circuit board is prevented based on the screw location and diameter.
・2-Piece Unit.
・With 2 fine-pitch connector units used for increased connection reliability, we offer a unique 2-connection method for each terminal as a new way to ensure highly accurate mounting (standard 11 mm connection pitch between the 2 arrays in the 2-piece unit).- Volume Discount
Configure nowStarting from∗ ： 1.91 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Board-to-Board Connector with 1.27-mm Pitch and 5 to 11-mm Height, FX4 Series
HIROSE ELECTRONIC
Board-to-board connector with half pitch. DIP circuit board mounting method; choose from a 5 to 11 mm mating height.
[Features]
·The FX4 series is a small-type board-to-board connector able to be set at a stacking height of 1 mm.
●Dip Timer.
1. Small and Lightweight.
・Mounting space and weight are the same as the prior products (FX2 series).
・Approx. 30% in comparison, mounting area is approx. 70% of prior product.
2. · Compatible with 5 mm to 11 mm stacking height.
· The stacking height between circuit boards is set at between 5 and 11 mm. in 1 mm increments.
3. Prevention of flux oozing.
· Prevents flux oozing during circuit board dip soldering.
4. Construction that prevents mis-insertion and reduces the required insertion/extraction force.
· The mating portion is constructed to completely prevent mis-insertion. It also utilizes a construction that reduces the amount of force required to insert and extract the connector.- Volume Discount
Configure nowStarting from∗ ： 2.12 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Board-to-Board Connector with 2.54-mm Pitch: HIF3H Series
HIROSE ELECTRONIC
This is a board-to-board interconnecting (stacking, vertical) connector with a 2.54mm pitch. This can be combined with other HIF3 series connectors.
[Features]
・Product variations: It is possible to connect board-to-board either horizontally or at a right angle.
・Compatibility: It can be combined with other HIF3 series connectors.- Volume Discount
Configure nowStarting from∗ ： 2.97 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Board-to-Cable Connector with Lock, 7.92-mm Pitch, High-Current Support - DF22 Series【1-100 Pieces Per Package】
HIROSE ELECTRONIC
[Features]
· Cable connector for board-to-cable and cable-to-cable connections. Supports 30 maximum amperes.
· Equipped with a lock mechanism and mechanism for preventing incorrect insertion to ensure safety.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.- Volume Discount
Configure nowStarting from∗ ： 0.15 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
WR Series
JAPAN AVIATION ELECTRONICS(JAE)
[Features]
· A low-profile connector with a minimal footprint and height, offering a range of selectable parallel board intervals of 4–9 mm.- Volume Discount
Configure nowStarting from∗ ： 5.54 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
IL-Y Series
JAPAN AVIATION ELECTRONICS(JAE)
[Features]
These connectors are for circuit board-to-wire connections for low-profile, thin design with a contact pitch of 1.5 mm (single-row), a mounting height of 6.3 mm, and a thickness of 3.5 mm.- Volume Discount
Configure nowStarting from∗ ： 1.09 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
IL Series
JAPAN AVIATION ELECTRONICS(JAE)
[Features]
· An original 2.5-mm pitch Series connector with a track record of various uses in AV equipment and consumer electronics.- Volume Discount
Configure nowStarting from∗ ： 0.40 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
DIN Connector (for Medium and High Electrical Currents) - XC4
OMRON
[Features]
・ This is a DIN connector for medium and high electrical currents, for which standards have been set internationally.
・ It conforms to and is compatible with DIN41612.
・ As there is sufficient insulation distance, it can be used with medium and high electrical currents, and high voltage circuits.
・ It can be mounted within the same rack as the XC5 series.
・ There is a wide selection of the M type of DIN connectors (mixed type) available.
▪ UL standard (File No.E103202) certified products are used as standard (except for some products).- Volume Discount
Configure nowStarting from∗ ： 14.18 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
SL 3.5 Series
WEIDMUELLER
Pluggable PCB connection with innovative connection technology for safe and intuitive handling.- Volume Discount
Configure nowStarting from∗ ： 0.86 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
DIC Series
HONDA TSUSHIN KOGYO
2.54 mm pitch connector used for circuit switching and the like.
[Features]
• Many varieties available for combination with the FCC and HKP series.
• Plating thickness is selectable according to cost requirements.
• Insulator is UL-certified.
• These connectors also come in 2, 3 and 4-series versions.- Volume Discount
Configure nowStarting from∗ ： 1.23 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
0.5-mm Pitch, 2 to 3-mm Height Board-to-Board Connector, FX11 Series
HIROSE ELECTRONIC
[Features]
· A board-to-board connector with a ground plate.
· Select with/without the ground plate and also the height of the board spacing (2–3 mm) to match the application.- Volume Discount
Configure nowStarting from∗ ： 3.38 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Board-to-Board Connector with 0.5-mm Pitch, 4 to 8-mm Height - DF17 Series
HIROSE ELECTRONIC
Connector for board to board connection with 0.5-mm pitch. Select the distance 4mm to 8mm between circuit boards by combining header and receptacle.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.- Volume Discount
Configure nowStarting from∗ ： 7.77 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Board-to-Board Connector (0.6-mm Pitch, 5 to 16-mm Height) - FX8C Series
HIROSE ELECTRONIC
The height between boards can be selected from 5 to 16 mm. Although it is compact, it has a guiding mechanism to improve operability. Can use for a wide range of equipment.
[Features]
· Stacking height 3 mm to 16 mm compatible.
· Stacking height between boards of 3 mm to 16 mm is applicable.
▪ SMT co‐planarity.
▪ The SMT solder part lead's co-planarity maintains high precision and 0.1 mm or less.
· Fit guiding.
· Although very small in size, importance is placed on fit operability by providing a guiding rib with a self-alignment of ± 0.6 mm.
· Protects against incorrect insertion into the circuit board.
· Equipped with a circuit board positioning boss, which prevents incorrect insertion into the circuit board by leveraging the position and diameter of the boss.
· Two-part integrated product.
· This novel, two-piece integrated product is available for all terminal pin number configurations and makes it possible to maintain mounting position accuracy. This is achieved by consolidating two connectors using a unique method, which improves fitting reliability when using two fine-pitch connectors. (The standard fitting pitch between the two rows for the two-piece integrated version is 11 mm.)
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.- Volume Discount
Configure nowStarting from∗ ： 2.85 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Board-to-Board Connector with 0.8-mm Pitch and 5 to 9-mm Height, FX6 Series
HIROSE ELECTRONIC
The height between boards can be selected from 5 to 9 mm. With a long mating length and large self-alignment volume while maintaining a small size, this product offers high connection reliability.
[Features]
· Compatible with 5 mm to 9 mm stacking height.
· The stacking height between circuit boards is set at between 5 and 9 mm. in 1 mm increments.
· Long effective mating length of 1.7 mm.
· A long and spacious effective mating length of 1.7 mm even with RoPro connectors.
· Fit guiding.
· A ±1 mm self alignment and large guiding volume makes for easy mating.
· Supports automatic mounting.
·In consideration of automatic mounting, and using stick packaging for standard packaging specifications, units with less than 80 pins are available for emboss packaging (however the product has an 80-pin limit).
▪ The SMT solder portion's lead co-planarity maintains a high precision of 0.1 mm max.- Volume Discount
Configure nowStarting from∗ ： 1.50 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Board-to-Board Connector for Perpendicular Connections with 1-mm Pitch, FX5 Series
HIROSE ELECTRONIC
A board-to-board connector for perpendicular connection. Equipped with 2 header heights to choose from, 2-stage sequence construction, and a large, inviting form.
[Features]
· Number of pins, header-side height: 2 types.
· 2 header types: low-back and high-back, are provided for variation in pin number when connecting to HDD, FDD, CD-ROM, and other units, as well as for variation in mating height.
· 2-stage sequence construction: the mating sequence has been constructed in 2 stages to protect the end unit.
·Fit guiding: With a ±1 mm self alignment, large guiding volume for easy mating, and guide ribs, mating is easily achieved.
▪ The SMT solder portion's lead co-planarity maintains a high precision of 0.1 mm max.
▪Miniaturization: Mounting area has been reduced by approx. 30% compared to prior half pitch connectors (1.27-mm pitch).- Volume Discount
Configure nowStarting from∗ ： 2.14 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Bottom Entry Connector with 2.54-mm Pitch, MDF7 Series
HIROSE ELECTRONIC
With the 2.54-mm pitch bottom entry connector and circuit board height can be set freely. Also able to be connected with IPM and IGBT.
[Features]
▪ Circuit board gap dimensions can be set freely: With the header pin pass-through type construction and a number of header variations, circuit board gap dimensions can be set outside of predetermined levels.
▪ Unified part loading surface: 2 circuit board part loading surfaces can be oriented in the same direction while facing each other.
▪ Rich variation: single-array, double-array, and tin/gold plating available.
▪ In addition, we provide headers that conform to all circuit board gap dimensions for compatibility with items outside the catalog. Feel free to discuss further details with us.- Volume Discount
Configure nowStarting from∗ ： 0.51 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Pin Header with 2.54-mm Pitch (Terminal 2-Row Type), A1 Series
HIROSE ELECTRONIC
2.54-mm pitch pin header terminal 2 row type. Can be arrayed without creating wasted space on 2.54 mm mesh board.
[Features]
· High density: Can be arrayed without creating wasted space on a 2.54 mm mesh board when the connectors are arrayed lengthwise.
· Number of pins variations: A1 series has 16 types from 6 pins to 64 pins and A2 series has 20 types from 1 pin to 20 pins.
· Compatibility: the A1 series is interchangeable with the HIF3B series cable side and HIF4H (receptacle) for a wide range of use.- Volume Discount
Configure nowStarting from∗ ： 0.58 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
2.5-mm Pitch, Vertical Connection Post Header, MDF14A Series
HIROSE ELECTRONIC
[Features]
■ For low-cost vertical board mounting with no reseating necessary
· Post header specially designed for vertical board mounting with no reseating necessary.
· Low-cost connection provided by a combination receptacle and plug design.
■ Current capacity: 5A
· ø0.8mm round post pins provide extra strength and enable current capacity of 5A.
■ Temporary board fixing mechanism
· Kinking keeps boards temporarily in place.
■ Pin-out specifications
· Compatible with a variety of pin-out specifications.- Volume Discount
Configure nowStarting from∗ ： 0.33 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Pin Header with 2-mm Pitch (Terminal 1-Row Type), A4 Series
HIROSE ELECTRONIC
2-mm pitch pin header terminal 1 row type. Allows for even higher precision installation.
[Features]
· Small, high-density mounting: A small, lightweight design enables high-density mounting.
· Also, the crimped slip case can be used by aligning connectors in a 2 mm grid.
· Product variation: In addition to DIP types, there are SMT and crimp types, and thus a wide array of variations is provided.
· Stacking variation: Can be set when used with board-to-board, in combination with A3B pin header and a 6 mm distance between boards, or in combination with A3C pin header and a space of 5.1 mm between boards.- Volume Discount
Configure nowStarting from∗ ： 0.25 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
2-mm Pitch Pin Header (Terminal 2-Row Type) A3 Series
HIROSE ELECTRONIC
2-mm pitch pin header terminal 2 row type. Allows for even higher precision installation.
[Features]
· Small, high-density mounting: A small, lightweight design enables high-density mounting.
· Also, the crimped slip case can be used by aligning connectors in a 2 mm grid.
· Product variation: In addition to dip types, there are SMT and crimp types, and thus a wide array of variations is provided.
· Stacking variation: When used board-to-board in combination with the A3B pin header, the distance between the boards can be set to 6 mm, or 5.2 mm when used in combination with the A3C pin header.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.- Volume Discount
Configure nowStarting from∗ ： 0.25 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
PC Card Connector Compatible with CardBus, IC11S Series
HIROSE ELECTRONIC
A PC card connector compatible with CardBus based on PC Card Standards. Select from mount direction, eject button, and stand-off variations.
[Features]
· PC Card Standard: Ground plate equipped with 8 connection ground points.
·Signals can be accelerated by using a PC card compatible with CardBus through this configuration.
· Compatible with Type I, Type II, and Type III cards.
· Includes terminal for ground clip.
· Space efficient: designed to also have a shallower depth, thereby reducing the required circuit board area.
· Further, POP-UP version 2 has a reduced pattern restriction area compared to version 1.
· Lowered height: Usable with thin-type sets due to a lowered height of 5.6 mm.
· High-performance eject mechanism: The eject mechanism uses a 2 point terminal push ejection mechanism to allow smooth card removal.
· Independent ejection mechanism used for easy removal of multiple high-output cards.
· Many variations: with many variations, a type that matches to a particular set can be selected.
· Choose from a standard type that mounts to the front of a circuit board, or a reverse type that mounts to the back.
· The types of eject button are arranged from left to right: rigid, turnable, and POP-UP.
· Standoff attachment is provided to allow parts to be mounted to the bottom portion of the connector.
· Lighter weight: Sets can be lightened, as this connector is 12.7 g lighter than normal types.
· Also, POP-UP version 2 is approx. 12% lighter than version 1.- Volume Discount
Configure nowStarting from∗ ： 6.36 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
CF Card Connector MI20 / 21 Series
HIROSE ELECTRONIC
This is a CF card connector. Wide variety available to suit different applications, with differing mount orientation, standoff inclusion, ejector button, and supported cards.- Volume Discount
Configure nowStarting from∗ ： 3.81 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
DIN Standard Compliant Board-to-Board Connector PCN12 Series
HIROSE ELECTRONIC
This is a DIN standard compliant board-to-board connector. Available in a wide variety and supports various connections.- Volume Discount
Configure nowStarting from∗ ： 3.13 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Back Connectors NX Series for I / O Cards
HIROSE ELECTRONIC
These are back connectors for I/O cards. The low profile design is shielded using a metal shell.
[Features]
• Ultra-low profile: The mounted height of the receptacle connector is 2.9 mm for an ultra-low profile, allowing mounting on type II I/O cards.
• Shell is metal: A metal shell was used for better shielding.
• Structured so that the metal shell always touches before the contacts do.
• Full ESD shielding: A cover over the mold provides full ESD shielding.
• Locks securely: An inner lock makes locking more secure.
• Less wiring work: The plug-side wiring uses AWG #28 pressure contacting (discrete type), so wiring is less work.
• Sequence structure: The receptacle connector for the I/O card is a 0.8 mm-pitch, SMT-type sequence structure.- Volume Discount
Configure nowStarting from∗ ： 6.30 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Circuit Board-to-Cable Connector (in Equipment), KX14/KX15 Series
JAPAN AVIATION ELECTRONICS(JAE)
A two-piece type, board-to-board connector for use inside increasingly high-functionality, smaller, lighter AV devices, networking devices, and other advanced electronics.
[Features]
· Compatible with parallel board intervals of 4–9-mm (1-mm each).
· Two, straight-type, insulator heights are available for KX14 (receptacle), and three for KX15 (plug).
· When installing parallel boards, the board interval dimensions can be selected between 4–9-mm (1-mm each) by using different receptacle and plug combinations.- Volume Discount
Configure nowStarting from∗ ： 4.03 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
FI-X Series
JAPAN AVIATION ELECTRONICS(JAE)
[Features]
· A 1.0 mm-pitch LCD interface connector for high-density mounting.- Volume Discount
Configure nowStarting from∗ ： 4.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
IL-G Series
JAPAN AVIATION ELECTRONICS(JAE)
· These are two-piece type connectors for circuit board-to-wire connections used for configuring pin headers and socket housings.
[Features]
· The wires are uniformly finished, crimped type for excellent workability and are completed for semi-automatic crimping machines, mass volume wiring connections, and manual crimping tools.
· Secure coupling is made possible due a combined pin header wall surface guide groove and a socket housing key, providing an incorrect coupling/reverse-insertion prevention structure.
· These lock lightly by the interlocking protrusions on both sides of the pin header and socket housing.
· The terminal section of the housing has a step to which the finger tips can be applied, making it easy to extract despite its small size.- Volume Discount
Configure nowStarting from∗ ： 0.24 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
LY Series
JAPAN AVIATION ELECTRONICS(JAE)
[Features]
These are connectors for high reliability PCBs that are utilized in combination with socket housings for box type pin headers and cables that are strongly resistant to connector drop and twisting.- Volume Discount
Configure nowStarting from∗ ： 0.75 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
PS Series, MIL Type
JAPAN AVIATION ELECTRONICS(JAE)
[Features]
· An insulation displacement connector that makes board-to-flat ribbon cable (FRC) connections easy.- Volume Discount
Configure nowStarting from∗ ： 2.35 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Crimped Original Type, PS Series
JAPAN AVIATION ELECTRONICS(JAE)
[Features]
・The socket contacts are crimped to discrete wires and then it is inserted into the socket housing.
・This is a board-to-wire connector used in combination with pin headers.- Volume Discount
Configure nowStarting from∗ ： 1.03 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
PS-LA Series
JAPAN AVIATION ELECTRONICS(JAE)
[Features]
· A small, low-profile PS Series connector — mounting height: 9.5 mm, contact pitch: 2.54 mm.
· The combination of a crimped socket and a box-style pin header (straight/angled) makes this connector strongly resistant against connector collapse and prying. This connector is optimally suited for mounting high-density, board-to-wire connections.
· A highly reliable type for obtaining a secure, stable connection. The structure prevents incorrect insertion and is strongly resistant to vibration and pulling. The socket contacts are a 2-point contact configuration, which utilize spring characteristics.- Volume Discount
Configure nowStarting from∗ ： 1.32 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Connector for Short Circuit, PS Series
JAPAN AVIATION ELECTRONICS(JAE)
[Features]
• Shortened socket and pin head allow for printed circuit board circuit exchange without using a switch.
• Small, lightweight and compact design is optimal for high-density circuit board mounting.
• Boasts simple handling for good workability. Can be used for its economic value.
• Sockets are made with highly reliable 2-point internal socket contact construction that gives rise to their springy quality.
• Pin headers have a groove cut between insulator contacts and can be used when the necessary number of terminals is cut.- Volume Discount
Configure nowStarting from∗ ： 1.32 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
DIN Connector (Twin Contact Type) - XC5 (DIN Standard)
OMRON
[Features]
・ The number of international standard DIN connectors has been expanded substantially.
・ The aim is to expand the number of contacts while leveraging the best points of DIN connectors.
・These variations can be used with a number of industrial applications.
・ This fits global needs by moving from one-piece connectors (card edged) to two-piece connectors.
・ A low price has been realized while also being able to maintain high reliability through the use of a twin contact type.
・ Low insertion force has been realized thanks to FEM analysis.
・ Can fit with the manufacturer's XC series.
▪ UL standard (File No.E103202) and CSA standard (File No. LR62678) certified products are used as standard.- Volume Discount
Configure nowStarting from∗ ： 3.08 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
DIN Style Connector (Twin Contact Type) - XC5 (DIN Style)
OMRON
[Features]
・ An expanded DIN style connector series, designed with DIN in mind.
・ Fits with DIN standard connectors.
・ As it is a circuit board mounted type, it is ideal for automatic solder mounting.
・ DIN style 1 uses the same method of attachment as DIN.
・ DIN style 2 broadens the mounting dimensions further, allowing mounting with excess room.
・UL standard (File No.E103202) and CSA standard (File No. LR62678) certified products are used as standard.
(Except XC5).- Volume Discount
Configure nowStarting from∗ ： 2.94 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
DIN Socket Sequence Connector - XC7
OMRON
[Features]
· A sequence connector made using DIN standard dimensions.
· Daughterboard hot swapping is made possible by inserting a power line from the front and extracting from the rear.
· Can be used in the same way as with standard DIN connectors. The mounting dimensions are the same as standard B type, and C type DIN connectors. Uses a sequence terminal for all connections and has a fit length of 4 mm, helping vastly save on mounting space.
· Uses a 2-stage sequence for the socket-end 1 mm sequence terminal, and 3-stage sequence for the plug-end sequence terminal.
· The contacts use a dual-sided contact structure. Furthermore, the gold/palladium plating of the contact points increases durability and allows for 5,000 insertions and extractions.
· The sequence terminal position can be chosen.- Volume Discount
Configure nowStarting from∗ ： 15.31 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
IC Socket - XR2
OMRON
[Features]
・ Highly reliable such as being able to cope with sudden power outages etc.
・Ideal for high speed data processing circuits.
· The contacts are round 4-point pin contacts which have good retention and superior vibration and shock resistance.
・ The opening for inserting the contact is large, so insertion is easy.
・ The position of the contact with the IC (integrated circuit) lead is high, ensuring an excellent contact.
· Has excellent resistance to rises in flux.
・ A rich product lineup, including open frame, closed frame, single-row type, DIP terminal, wrapping (wrap) terminal, and low-profile DIP terminal types.
・ Gold flash-plated products are also now available as a series, allowing you to choose the perfect product for the application..
▪ UL standard (File No.E103202).
・ Certified products are used as standard.- Volume Discount
Configure nowStarting from∗ ： 1.34 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Connector Shape |
| A/B/C |
| D/E/F |
| G/H/I |
| M/N/O |
| P/Q/R |
| S/T/U |
| V/W/X |
| Number |
| Applicable pin/contact |
| Number Of Cores |
| Application |
| Allowable Current(A) |
| Allowable Voltage(V) |
| Wire connection method |
| Connection direction |
| Protection function (environmentally resistant) |
| Representative Standard |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | JAPAN AVIATION ELECTRONICS(JAE) | HIROSE ELECTRONIC | HIROSE ELECTRONIC | JAPAN AVIATION ELECTRONICS(JAE) | OMRON | HONDA TSUSHIN KOGYO | HIROSE ELECTRONIC | JAPAN AVIATION ELECTRONICS(JAE) | OMRON | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | JAPAN AVIATION ELECTRONICS(JAE) | JAPAN AVIATION ELECTRONICS(JAE) | JAPAN AVIATION ELECTRONICS(JAE) | OMRON | WEIDMUELLER | HONDA TSUSHIN KOGYO | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | JAPAN AVIATION ELECTRONICS(JAE) | JAPAN AVIATION ELECTRONICS(JAE) | JAPAN AVIATION ELECTRONICS(JAE) | JAPAN AVIATION ELECTRONICS(JAE) | JAPAN AVIATION ELECTRONICS(JAE) | JAPAN AVIATION ELECTRONICS(JAE) | JAPAN AVIATION ELECTRONICS(JAE) | JAPAN AVIATION ELECTRONICS(JAE) | OMRON | OMRON | OMRON | OMRON |
| Product Series | DIN Standard Compliant Board-to-Board Connector PCN10 Series | Pin Header with 2.54-mm Pitch (Terminal 1-Row Type), A2 Series | DIN Connector (4-Row, 128-Contact Type) - XC5 (Multi-Contact) | Board-to-Board Connector (0.5-mm Pitch, 4 to 5-mm Height) - FX10 Series | Board-to-Board Connector with 0.6-mm Pitch and 3 to 4-mm Height, FX8 Series | Board-to-Board Connector with 1.27-mm Pitch and 5 to 11-mm Height, FX4 Series | DIN Connector (for Medium and High Electrical Currents) - XC4 | 0.5-mm Pitch, 2 to 3-mm Height Board-to-Board Connector, FX11 Series | Board-to-Board Connector with 0.5-mm Pitch, 4 to 8-mm Height - DF17 Series | Board-to-Board Connector (0.6-mm Pitch, 5 to 16-mm Height) - FX8C Series | Board-to-Board Connector with 0.8-mm Pitch and 5 to 9-mm Height, FX6 Series | Board-to-Board Connector for Perpendicular Connections with 1-mm Pitch, FX5 Series | Pin Header with 2.54-mm Pitch (Terminal 2-Row Type), A1 Series | 2.5-mm Pitch, Vertical Connection Post Header, MDF14A Series | DIN Standard Compliant Board-to-Board Connector PCN12 Series | Circuit Board-to-Cable Connector (in Equipment), KX14/KX15 Series | |||||||||||||||||||||||||||||
| Starting from∗ | 0.80 € *Unit price with basic configuration Volume Discount | 1.80 € *Unit price with basic configuration Volume Discount | 0.37 € *Unit price with basic configuration Volume Discount | 1.77 € *Unit price with basic configuration Volume Discount | 20.53 € *Unit price with basic configuration Volume Discount | 1.20 € *Unit price with basic configuration Volume Discount | 3.30 € *Unit price with basic configuration Volume Discount | 2.65 € *Unit price with basic configuration Volume Discount | 1.53 € *Unit price with basic configuration Volume Discount | 1.91 € *Unit price with basic configuration Volume Discount | 2.12 € *Unit price with basic configuration Volume Discount | 2.97 € *Unit price with basic configuration Volume Discount | 0.15 € *Unit price with basic configuration Volume Discount | 5.54 € *Unit price with basic configuration Volume Discount | 1.09 € *Unit price with basic configuration Volume Discount | 0.40 € *Unit price with basic configuration Volume Discount | 14.18 € *Unit price with basic configuration Volume Discount | 0.86 € *Unit price with basic configuration Volume Discount | 1.23 € *Unit price with basic configuration Volume Discount | 3.38 € *Unit price with basic configuration Volume Discount | 7.77 € *Unit price with basic configuration | 2.85 € *Unit price with basic configuration Volume Discount | 1.50 € *Unit price with basic configuration Volume Discount | 2.14 € *Unit price with basic configuration Volume Discount | 0.51 € *Unit price with basic configuration Volume Discount | 0.58 € *Unit price with basic configuration Volume Discount | 0.33 € *Unit price with basic configuration Volume Discount | 0.25 € *Unit price with basic configuration Volume Discount | 0.25 € *Unit price with basic configuration Volume Discount | 6.36 € *Unit price with basic configuration Volume Discount | 3.81 € *Unit price with basic configuration Volume Discount | 3.13 € *Unit price with basic configuration Volume Discount | 6.30 € *Unit price with basic configuration Volume Discount | 4.03 € *Unit price with basic configuration Volume Discount | 4.00 € *Unit price with basic configuration Volume Discount | 0.24 € *Unit price with basic configuration Volume Discount | 0.75 € *Unit price with basic configuration Volume Discount | 2.35 € *Unit price with basic configuration Volume Discount | 1.03 € *Unit price with basic configuration Volume Discount | 1.32 € *Unit price with basic configuration Volume Discount | 1.32 € *Unit price with basic configuration Volume Discount | 3.08 € *Unit price with basic configuration Volume Discount | 2.94 € *Unit price with basic configuration Volume Discount | 15.31 € *Unit price with basic configuration Volume Discount | 1.34 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | 5 Days | 5 Days | 5 Days | 5 Days | 6 Days | 6 Days | 5 Days | 5 Days | 6 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 6 Days | 5 Days | 9 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 6 Days | 6 Days | 5 Days | 6 Days |
| Connector Shape | Square shape | - | - | Square shape | Square shape | - | - | Square shape | - | - | - | - | - | - | Square shape | Square shape | Square shape | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | - | - | Square shape |
| A/B/C | - | - | Other | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Other | - | Other | Other | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| D/E/F | - | - | - | - | DIN/miniDIN | Other | Other | - | - | Other | Other | - | Other | - | - | - | DIN/miniDIN | - | Other | Other | Other | Other | Other | Other | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | DIN/miniDIN | - | - | - |
| G/H/I | - | - | - | - | - | - | - | - | - | - | - | Other | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Other | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| M/N/O | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Other | - | Other | - | - | - | Other | - | Other | - | - | - | - | - | - | - | - | - | - | - | - |
| P/Q/R | - | Other | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Other | - | - | - | - | - | - | - | - | - | - | - | - | - |
| S/T/U | - | - | - | Other | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| V/W/X | - | - | - | - | - | - | - | - | - | - | - | - | - | Other | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Number | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Applicable pin/contact | Male (plug) | Male (plug) | Male (plug) | Male (plug) | Male (plug) | Male (plug) | Male (plug) | Male (plug) | Male (plug) | Male (plug) | Male (plug) | Male (plug) | Male (plug) | Male (plug) | Male (plug) | Male (plug) | Male (plug) | Male (plug) | Male (plug) | Male (plug) | Male (plug) | Male (plug) | Male (plug) | Male (plug) | Male (plug) | Male (plug) | Male (plug) | Male (plug) | Male (plug) | Male (plug) | Male (plug) | Male (plug) | Male (plug) | Male (plug) | Male (plug) | Male (plug) | Male (plug) | Male (plug) | Male (plug) | Male (plug) | Male (plug) | Male (plug) | Male (plug) | Male (plug) | Male (plug) |
| Number Of Cores | 2 ～ 41 | 20 ～ 128 | 1 ～ 20 | 30 ～ 120 | 128 | 2 ～ 144 | 80 ～ 168 | 10 ～ 60 | 10 ～ 64 x 2 | 60 ～ 140 | 20 ～ 68 | 16 | 2 ～ 5 | 20 ～ 160 | 4 | 2 ～ 12 | 15 ～ 48 | 2 ～ 6 | 2 ～ 24 | 80 ～ 140 | 70 | 60 ～ 140 | 20 ～ 100 | 20 ～ 80 | 5 ～ 24 | 6 ～ 64 | 5 ～ 10 | 4 | 2 ～ 32 | 68 | 50 | 64 ～ 96 | 32 | 20 ～ 80 | 30 | 2 ～ 15 | 4 ～ 44 | 10 ～ 60 | 5 ～ 60 | 4 ～ 30 | 10 ～ 30 | 20 ～ 100 | 16 ～ 100 | 96 | 8 ～ 64 |
| Application | - | Board-to-Board | For PCB | Board-to-Board | For PCB | For PCB | Board-to-Board | - | For PCB | Board-to-Board | Board-to-Board | For PCB | Cable Connection / For PCB / Panel Mount | Board-to-Board | - | - | For PCB | For PCB | For PCB | Board-to-Board | Board-to-Board | Board-to-Board | Board-to-Board | Board-to-Board | Board-to-Board | For PCB | Board-to-Board | For PCB | For PCB | For PCB | For PCB | Board-to-Board | Cable Connection | Board-to-Board | - | - | - | Other | - | - | - | Board-to-Board | Board-to-Board | For PCB | For PCB |
| Allowable Current(A) | - | 2 | 3 | 1 | 2 | 3 | 0.3 | - | 1 ～ 3 | 0.4 | 0.5 | 3 | 22 ～ 25 | - | - | - | 6 ～ 15 | 10 | 1 | 0.3 | 0.3 | 0.4 | 0.5 | 0.5 | 3 | 3 | 5 | 1 | 1 | 0.5 | 0.5 | 2 | 0.5 | - | - | - | - | - | - | - | - | 2 | 2 | 2 | 1 |
| Allowable Voltage(V) | 500 | AC300 | AC200 | 500 | AC300 | 300 | AC50 | - | AC250 ～ AC300 | AC100 | AC125 | AC300 | AC/DC1000 | - | - | - | AC380 ～ AC500 | 300 | AC125 | AC50 | AC50 | AC100 | AC100 | AC100 | AC250 | AC200 | AC250 | AC200 | AC200 | - | AC125 | AC300 | AC125 | - | - | 1500 | 1000 | 500 | 1000 | - | - | AC300 | AC300 | AC300 | AC300 |
| Wire connection method | Crimp | Other | Other | Solder | Solder | - | Other | Solder | Pressure Welding | Other | Other | Other | Crimp / Other | Solder | - | Solder | Solder | - | - | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Other | Pressure Welding | Solder | - | Solder | Solder | Solder | Solder | Solder | - | Solder | - | - | Solder |
| Connection direction | Straight | Straight / Angle | Straight / Angle | Straight / Angle | Angle | Straight / Angle | Straight | Straight / Angle | Straight / Angle | Straight | Straight | Angle | Straight / Angle | Straight / Angle | Straight | Straight / Angle | Angle | Straight / Angle | Straight | Straight | Straight | Straight | Straight | Angle | Straight | Straight / Angle | Angle | Angle | Straight / Angle | Angle | Angle | Angle | Straight | Straight / Angle | Straight | Straight / Angle | Straight / Angle | Straight / Angle | Straight / Angle | Straight / Angle | Straight | Straight / Angle | Straight / Angle | Angle | Straight |
| Protection function (environmentally resistant) | - | - | - | N/A | N/A | N/A | - | - | - | - | - | - | - | N/A | - | - | N/A | - | N/A | - | - | - | - | - | - | - | - | - | - | - | - | - | - | N/A | - | - | - | - | - | - | - | N/A | - | - | N/A |
| Representative Standard | - | - | - | - | - | - | - | - | - | - | - | - | UL / CUL / TUV | - | - | - | UL | UL / CSA | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | UL | - | - | - | - | UL / CSA | - | - | UL |
Loading...
Filter by:
-
Connector Shape
- Round
- Square shape
-
A/B/C
- Other
-
D/E/F
- DIN/miniDIN
- Other
-
G/H/I
- Other
-
M/N/O
- Other
-
P/Q/R
- Other
-
S/T/U
- USB
- Other
-
V/W/X
- XH
- Other
-
Number
- Other
-
Applicable pin/contact
- Male (plug)
- Female (socket)
- Other
-
Number Of Cores
-
Application
-
Allowable Current(A)
-
Allowable Voltage(V)
-
Wire connection method
- Solder
- Crimp
- Pressure Welding
- Other
-
Connection direction
- Straight
- Angle
-
Protection function (environmentally resistant)
-
Representative Standard
Brand
-
- HIROSE ELECTRONIC (25)
- JAPAN AVIATION ELECTRONICS(JAE) (14)
- OMRON (12)
- HONDA TSUSHIN KOGYO (2)
- MOLEX (1)
- WEIDMUELLER (1)
- FUJIKURA (DDK) (0)
- HARTING (0)
- ERNI (0)
CAD data type
-
- 2D
- 3D
Categories related to Board-To-Board Connectors
Metoda płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.