Square Connectors

?* Information on days to ship and prices

• 

  57 Series Soldering / DIP-Type Connector

  FUJIKURA (DDK)

  A 2.159-mm pitch ribbon-type connector for soldering. These are the core of the 57 family of connectors, which are available in 5 types.
  
  [Features]
  ■ This 57 Series forms the core of the 57 family of DIP connectors. The following 5 types are available.
  · 57-10 type (unit connection plug).
  · 57-20 type (unit connection receptacle).
  · 57-30 type (plug with straight hood for cables).
  · 57-40 type (panel receptacle with locking spring).
  · 57-60 type (cable relay receptacle).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.41 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  PCR Series

  HONDA TSUSHIN KOGYO

  Bellows, high-density contact type and accessories are, as with the PCS series, applicable to various uses.
  
  [Features]
  · A wide range of cores of 20 to 96 are available from the board to the cable.
  · For EMI measures other than FCC.
  · A wide range of cores of 20 to 128 are available from board to board.
  · Products enabling live wire connection (three steps) are available.
  · Parallel mating is feasible through a housing guide mechanism and the structure prevents shorting between adjacent contacts.
  · Ideal for connection to horizontal, parallel, and vertical backs.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.64 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  D-Sub, D02, D02-M15 Series

  JAPAN AVIATION ELECTRONICS(JAE)

  A small, lightweight, highly reliable connector for making every type of electronic device smaller and more dense to support advanced features.
  
  [Features]
  ・The D-sub connector is becoming the standard with its combination of pin and socket connector types.
  ・Interchangeable with different connector types and commonly used accessories.
  ・The shell joint shape has polarity, fully preventing accidental reverse insertion.
  ・The DO2 series is a high-density mounting connector with approximately twice as many contacts inside the same shell size as the D-sub.
  ・The outer appearance is short and compact. The contact and insulation material is contained in a hard, steel shell.
  ・There are 5 shell sizes (E, A, B, C, and D), which come with 9, 15, 25, 37, and 50 cores. Special arrays with coaxial and high-current contacts are also available.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.57 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Misumi, Waterproof, E-Model Connector (Screw Wire Connection)

  MISUMI

  [Features] MIAutomatic SteelI's original, low-cost, environmentally resistant and waterproof E-type plug. Thanks to the cable's screw connection, it can be easily connected with a slotted screwdriver without the need for special tools. The screw connection is equipped with a contact. Please confirm the type and plug or socket before ordering.

  • Volume Discount

  • Order quantities extended (D-JIT)
  • UL
  • IP65
  • For Power Supply
  • For Signal
  • Connection between Boards
  • Connection in Boards
  • Screw Type
  • Insertion
  • 2DCAD
  • Silver-Plated

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.29 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  PCS Series Cases

  HONDA TSUSHIN KOGYO

  PCS series case.
  
  [Features]
  • Board-to-cable cases are available for 20 - 96 contacts: Pressure contact connection is standard for cables (AWG #28 or 30), reducing wiring labor.
  · A soldered type is also available.
  • FCC and other EMI shielding: Sturdy construction is well suited for interfaces.
  · Quick lock using metal lock spring.
  · Models supporting panel relays are also available.
  · Accessories for preventing incorrect insertion are also available.
  • Wide range (34 - 150 contacts) of board-to-board connections available: Design minimizes insertions and extractions, even with a high number of contacts.
  • Housings are structured so that all cleaning fluid drains out when cleaning away flux (mold-type male connectors).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.79 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  D-SUB plug 180 °

  CONNFLY

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.45 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  MR Series Case

  HONDA TSUSHIN KOGYO

  Case for the MR series.
  
  [Features]
  · Dual screw and a spring lock mechanism that can withstand any shock.
  · Dust-proof mechanism with excellent environmental resistance.
  · Optimal for device miniaturization via improvement of robustness, compactness, weight and density.
  · A relay type case is also provided

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.45 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Han Series Hood / Housing

  HARTING

  Han Series Hoods/Housings.
  [Features]
  · Shielded through various locking mechanisms to provide high reliability suitable for industrial use.
  · Superior nature of materials and design have been recognized in the past 10 years.
  · HanA and HanB products have become a standard in the industrial field.
  [Applications]
  · Ideal for industrial use.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.07 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  MR Series

  HONDA TSUSHIN KOGYO

  Small-type/multi-pin connector developed for use with data devices which uses wide-type terminals with exceptional reliability.
  
  [Features]
  · Dual screw and a spring lock mechanism that can withstand any shock.
  · Dust-proof mechanism with excellent environmental resistance.
  · Optimal for device miniaturization via improvement of robustness, compactness, weight and density.
  · A relay type case is also provided

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.83 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  17JE Series Soldering Type Connector

  FUJIKURA (DDK)

  17 Series (Dsub type) soldering connection type square connector for cable equipment.
  [Features]
  · Square connector for solder wire connections, with solder cup type contact.
  · Ni plating is used for the metal shell surface treatment, and the pin connector is bead treated.
  · The hood is metalized plastic, which provides weight reduction and a high shielding effect.
  · Either the pin connector or the socket connector can be selected.
  · There are 4 shell sizes: 9, 15, 25, and 37. The core counts are 9 cores, 15 cores, 25 cores, and 37 cores.
  · The cable and plug wire connection can be shielded with a metalized hood, which is effective as an EMI measure.
  [Applications]
  · Can be used as an interface for equipment and devices. Optimal for use on twisted wire of AWG22 or less.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.30 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  PCR Series Case

  HONDA TSUSHIN KOGYO

  This is a PCR series case.
  
  [Features]
  · A wide range of cores of 20 to 96 are available from the board to the cable.
  · For EMI measures other than FCC.
  · A wide range of cores of 20 to 128 are available from board to board.
  · Products enabling live wire connection (three steps) are available.
  · Parallel mating is feasible through a housing guide mechanism and the structure prevents shorting between adjacent contacts.
  · Ideal for connection to horizontal, parallel, and vertical backs.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.73 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  MX34 Series

  JAPAN AVIATION ELECTRONICS(JAE)

  These are non-waterproof, small-type board-to-cable connectors developed mainly for on-board use.
  
  [Features]
  ・A small-type/high density connector with abundant variations.
  A small-type/high density connector with 2.2 mm (8 turns = 4 mm) contact pitch and 025 tab size.
  ・Single-row / two-row types are available supporting 3–40 pins.
  ・Furthermore, in addition to the through-hole type, circuit board pin connector, the SMT type (straight, 20/32 pins) is also available. This type is compatible with automatic mounting, allowing for a variety of connection formats.
  ・Reliable mating due to mechanical locking structure.
  ・The mechanical locking structure is resistant to vibration and pulling. Simply inserting the plug creates a clicking sound that ensures the lock is secured. This allows users to confirm proper mating even when visibility is restricted.
  ・Double-layered stop construction to prevent contact removal.
  ・Preserving the contact inside the housing involves a double-layer construction consisting of a primary stopping housing lance and a secondary, internal preset, socket housing retainer. This effectively prevents disconnection through vibrations and pulling.
  ・ Furthermore, the retainer is constructed so that its locking position cannot be set if the contact is not fully inserted. This allows for the detection of semi-inserted contacts.
  ・The socket lock is protected by a unique housing structure.
  ・A bridge is installed around the upper portion of the clock lever in the socket housing. This prevents warping and other lock lever damage when an external load is applied when cable harnesses are bundled together.
  ・High-reliability socket contact
  ・The contact is a box-style unit that is resistant to the effect of external power fluctuations, etc.
  ・The contacts have a double layer coil construction and are strongly resistant against prying. This is a highly reliable model that ensures a stable connection.
  · Crimped type for easy wire connection.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.26 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  MIXO Modular Insert & Contact

  ILME

  [Features]
  · MIXO.
  · MIXO modular inserts and contacts.
  · Supports large currents up to 200 A, high voltage up to 5, 000 V, high density, air piping, LANs, and USBs.
  · Supports optical fiber, coaxial, and Dsub9Pin connectors.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.97 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  [Enclosure]C Type IP66, Rotary Lever Series

  ILME

  Ilme's traditional lever C type
  It is a standard enclosure of Ilme connector.
  A uniquely developed rotary lever enables smooth attachment and detachment.
  Stainless steel levers and springs ensure safe and secure fitting and airtightness.
  The manufacturer will flexibly respond to various on-site needs with the manufacturer's wide lineup.
  Further notes: It is a slim type that contributes to the miniaturization of equipment and supports all connection types.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	6.26 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Cable Socket, Freely Configurable

  HIRSCHMANN

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.63 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  HDC HE Series

  WEIDMUELLER

  Insert for industrial plug-in connectors, consisting of contact element and insulating body.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.00 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Small Rack and Panel Connector, QR / P15 Series

  HIROSE ELECTRONIC

  Construction is divided into main connector unit / cable connection portion. 8, 24 (4 pins for power source) and 40-pin configuration.
  
  [Features]
  ・Construction divided into main connector unit / cable connection portion: dividing the main body into main connector unit / cable connection portion parts enables product harness insertion from the back, increasing cable connection harness and set mounting workability.
  ・Sequence structure: the 40-pin type uses 2 pins for both terminals as a sequence terminal, taking safety into full consideration.
  ・Power supply compatibility: The 24-pin type incorporates power source terminal type.
  ・The power supply terminal connection uses MDF6 series 4-pin connectors (3.5-mm pitch, UL and CSA certified). Use of AWG16 ensures a 6A power supply capacity.
  ・Further, it is also possible to crimp using automated machines.
  ・Contact reliability: the main connector body contact portion uses a forked, double contact (tuning fork) shape in an effort to offer more stable contact.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.21 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  JN6 Series

  JAPAN AVIATION ELECTRONICS(JAE)

  These small servo motor connectors are all reversible by 180° and 4-pin versions are included for power supplies, 2-pin versions are included for brakes, and 7-pin versions are included for encoders.
  
  [Features]
  · The JN6 was developed as a small servo motor after the JN4 and JN5 series.
  · These connectors are all reversible by 180° and 4-pin versions are included for power supplies, 2-pin versions are included for brakes, and 7-pin versions are included for encoders.
  · All plastic - lightweight and low-cost.
  · Small and low-profile: 4-pin with overall plug length of 28 mm and plug height of 11.4 mm.
  · Receptacle attachment: 4-pin with mold-in attachment to motor body. 2-pin, 7-pin: press-fit to motor body.
  · Wire connection method: 4-pin receptacle utilizes a circuit board through hole. The 4-pin plugs as well as 2-pin and 7-pin versions are all crimped.
  · Robust fitting: secure fitting using four screws.
  · Waterproofing performance: IP67.
  · Cable extraction.
  · Two cable extraction directions are available (180°).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.87 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Right-angle Connector

  HIRSCHMANN

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.37 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  D-Sub Connector (Solder Connection Type), HD Series

  HIROSE ELECTRONIC

  A solder connection type D-sub connector. Terminal connection portion has a solder cup for the easy attachment of every cable type.
  
  [Features]
  · Small and lightweight connector due to metal shell.
  · The solder attachment side has a solder cup construction for easy soldering. It is also optimal for wires up to a maximum size of AWG#20.
  · The insulation material is heat/chemical resistant and uses the excellent PBT resin (UL94V-O) containing glass.
  · CTF, CTH, and other plug case types can be used. Straight dip (SD type), right angle dip (RD type), and ribbon pressure (FD type) connections can be used.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.11 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  SUMICON 1600 Series Multi-Contact Rectangular Connector【1-100 Pieces Per Package】

  HIROSE ELECTRONIC

  A rectangular multi-contact connector manufactured using a unique HIROSE design.
  [Features]
  · Nine contact configurations (8, 12, 16, 20, 24, 28, 34, 45, 60) are available. Solder type, wrapping type and crimp type connector units are available.
  · Accessories include C case, CA case, CBA case, ST stopper, STA stopper, STB stopper, etc. that can be combined for use in a wide range of applications.
  · The connector unit and accessories (cases, stoppers) are completely separate in the SUMICON 1600 series. This means that they can be combined for a variety of uses as well as enabling easier wiring connections.
  · These connectors are specified in the NTT specifications, “Spec. No. 1931.”

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.55 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  One-Touch Lock D-Sub Hood

  PROVERTHA

  One-touch attachment and detachment of the Dsub connector will be possible. Can be installed freely using 3 connection accessories (locking bolts).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	16.10 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  CK / CKS Small Screw Type and Spring Type 10A / 250 V Insert

  ILME

  CK / CKS Small screw type / spring type, 10A / 250 V, Insert
  
  [Features]
  ・CK/CKS.
  ・Small screw type / spring type.
  ▪ 10A/250 V insert

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.00 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  D-SUB housing, Plastic, metallised with screw locking

  PROVERTHA

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.01 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Han Q4 / 2-F-c Female insert

  HARTING

  [Specifications]
  ・UL / CSA: UL 1977 ECBT2.E235076, CSA-C22.2 No. 182.3 ECBT8.E235076, UL 2237 PVVA2.E318390, CSA-C22.2 No. 182.3 PVVA8.E318390
  ・eCl@ss: 27440205 Contact insert for industrial connectors
  ・Connection (components): Crimp
  ・Connector type: Socket inset
  ・Number of pins: 2

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	26.77 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Han Q4 / 2-M-c male insert

  HARTING

  [Specifications]
  ・UL / CSA: UL 1977 ECBT2.E235076, CSA-C22.2 No. 182.3 ECBT8.E235076, UL 2237 PVVA2.E318390, CSA-C22.2 No. 182.3 PVVA8.E318390
  ・eCl@ss: 27440205 Contact insert for industrial connectors
  ・Connection (components): Crimp
  ・Connector type: Pin inset
  ・Nominal voltage(V): 690
  ・Number of pins: 2

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	26.77 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Misumi, Waterproof, E-Model Connector (Crimp Wire Connection)

  MISUMI

  [Features] MIAutomatic steelI's original, low cost, environmentally resistant and waterproof E-type connector. It is a highly reliable crimp connection that can reduce working time. Fully compatible with major connector manufacturers' products. Please check the plug or socket before ordering.

  • Volume Discount

  • UL
  • IP65
  • For Power Supply
  • For Signal
  • Connection between Boards
  • Connection in Boards
  • Screw Type
  • Insertion
  • 2DCAD
  • Silver-Plated

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.75 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  HDC HA Series

  WEIDMUELLER

  Insert for industrial plug-in connectors, consisting of contact element and insulating body.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.48 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  DF11 Series 2‑mm Grid Double-Row Connector (UL / CSA Standard Certified Product)【1-500 Pieces Per Package】

  HIROSE ELECTRONIC

  [Features]
  · The contact configuration has been condensed into 2 rows with a 2-mm pitch and 5-mm width.
  · Allows for twice the number of signals with the same amount of space as a conventional 2‑mm pitch single-row connector.
  · Available with either crimped or IDC contacts. Board-to-cable, in-line and board-to-board connector types are also available, enhancing board design flexibility.
  · Choose from gold or tin plating to match application. SMT-compatible products are also available.
  · Accommodates 22 AWG to 30 AWG wires even with a compact 2‑mm double-row design.
  · Reduce man-hours and eliminate manual work processes for easy wiring by using a fully-automatic IDC machine, even for tedious multi-harnessing (branch wire connections).
  [Applications]
  · For all types of OA equipment, including copy machines and printers.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.06 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  D-Sub Connector Plug Cases (EMI Shielded), CTH Series

  HIROSE ELECTRONIC

  These are EMI-shielded plug cases for D-sub connectors. • Because the ABS resin is plated, the connectors are lightweight, sturdy, and provide improved electromagnetic shielding.
  
  [Features]
  · Because the lock mechanism is a screw type mechanism it is rugged and reliable.
  · Because the material properties call for plating a tough ABS resin, the resin is lightweight, solid, and provides an improved electromagnetic wave shielding effect.
  · In order to improve the shield effect, the cable clamp is secured using 2 types of clamps on the shield part and the clamp has a configuration for pinching the plug cases together.
  • Use screws to ground the drain wire of the cable with a clamp.
  • Easily incorporated using solder (HD type), pressure contact (FD*D type) or crimping (CD type).
  • For FD*D, however, wire a fused I/O cable when using the case.
  • CTH-type plug cases use UL94HB ABS resin and the plating conforms to the UL746C standard.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.59 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  MX23A Series, Contact

  JAPAN AVIATION ELECTRONICS(JAE)

  [Features]
  · A small low-profile connector, which can be widely used in vehicles, motor bikes and other types of waterproof equipment.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	6.71 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  MX31 Series

  JAPAN AVIATION ELECTRONICS(JAE)

  The number of pins in these connectors has increased along with the greater role of electronic control in automobiles. In addition, this non-waterproof, high-density type connector fulfills the need for a small and lightweight product.
  
  [Features]
  [High-density implementation achieved with a large number of pins]
  · These composite-type connectors include both signal (2.2 A) and power (5.7 A) internal circuits in the same connectors. These four-row type connectors are small, highly dense, and include a large number of pins with a 2.2 mm contact pitch (for signals), 3.2 mm contact pitch (for power), and up to a maximum of 135-pin connectors. Multiple socket connectors are combined together on the wire side for each single pin header on the circuit board side.
  [Mechanical lock structure ensures secure fitting]
  · The mechanical lock structure protects against vibrations and pulling. A distinct click sound helps confirm that secure fitting has occurred.
  [Double locking structure reliably prevents loss of contact]
  · Contact with the socket housing is maintained via a housing lance and an internal retainer contained in the housing. This double locking structure, which locks at two locations, reliably prevents loss of contact due to vibration or pulling.
  · The retainer's structure ensures that a contact cannot be set into the locking position unless it is completely inserted. This makes it possible to detect partial insertion of contacts.
  [Low insertion force structure with easy insertion and extraction]
  · A low insertion force type structure requiring 70 N or less of force per socket housing to achieve insertion makes insertion and extraction easy.
  [Tin and gold plating are available for the contact finish]
  · The standard finish for contacts is tin plating. Gold plating is also available for 135-pin pin headers, offering a higher level of contact reliability.
  [Misconfiguration-prevention types also available]
  · Pin headers (70-pin and 135-pin versions) and socket housings come in standard types as well as types with different mating part conformations in order to prevent incorrect configuration. Use of these types prevents incorrect fitting when two different pin headers with pins in the same positions are used next to each other.
  · Crimping enables easy connection.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.61 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Han-Modular Series: Various Modules【1-2 Pieces Per Package】

  HARTING

  It is possible to save space used by connectors by selecting the modules to suit the operating environment (Models are separated using "-" rather than spaces).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.56 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  CSH Tool Not Required Spring Type 16A / 500V Insert

  ILME

  CSH, no-tool-required spring type, 16A / 500V insert
  
  [Features]
  ・CSH.
  ・No-tool-required spring type.
  ▪ 16A / 500V.
  ▪ Insert

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	19.86 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  D-Sub Connectors XM3-L / XM2-L / XM4K / XM4L

  OMRON

  [Features]
  ・ This D-sub connector series has been renewed with lead-free compatible products.
  ・ The fastening screw diameter can be identified from its external appearance.
  ・ A solution to problems associated with combining fasteners has been found.
  ・ Shielded connectors for EMI countermeasures.
  ▪ This is a UL standard (File No.E103202) certified product (except for XM4Z type).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	6.20 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Faston 250 series, crimp terminal housing

  TE CONNECTIVITY

  Quick-disconnect connector housing made by TE Connectivity.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.79 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  57F Series Flat Cable Crimping Connector

  FUJIKURA (DDK)

  The 57F series is an all-plastic flat cable crimping connector.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	11.07 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  U1-U2-U3 Connectors

  UNIVER

  available in 20mm and 30mm

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.56 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  EPIC® ULTRA H-B 6 SGR LB

  LAPP

  Benefits
  · The housing variants allow different clamping ranges (6 - 13 mm or 9 - 17 mm)
  · The arrow is a new design element on the housing surface and makes it easy to find and easy to connect in tight spaces and possibly poorly visible areas of application
  · UL certification according to technical data enables the product to be used on the North American market
  · VDE-tested quality
  · With a closed base and side cable entry for orderly cable routing
  · The locking is performed using a stainless steel lever
  · The surface-mount base can be plugged into many of the most popular hoods
  · For article names with the addition “BRUSH”, the integrated cable gland is supplemented by our innovative SKINTOP® BRUSH brass brush, which enables 360° contacting of the copper braided screening and thus enables the interference signals to be deflected even more effectively Brush wires enable easier assembly of the connector\nand obtain the gap-free 360° coverage of the copper stranded screening\n\n
  · Meets protection class IP 67 when locked
  · The integrated brass SKINTOP® cable gland is used for sealing and strain relief cable entries Compared to housings where the cable gland is added separately, the overall size of the housing is more space-saving
  · Protection class classified according to NEMA 250 and tested pursuant to UL50E
  
  Application
  · For protecting the connector insert against environmental influences
  · Withstands high chemical and mechanical loads
  · Suitable for outdoor use
  · Especially for environments where electromagnetic compatibility (EMC) is required
  · With modular connector assembly, also suitable for signal and data transmission
  · Especially for environments where the product comes into contact with water, cleaning agents and saline substances
  · For use with many EPIC® rectangular connector inserts or module inserts
  · For connecting devices and machines to a power supply in various applications

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	22.60 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  ASSMANN WSW D-Sub Connector, Female, 37 Positions

  ASSMANN WSW

  ·Number of contacts = 37
  ・ Gender = female
  ・ Body orientation = right angle
  · Mounting type: through hole
  ·Pitch = 2.77 mm
  ·Mounting hardware = 4-40 UNC thread lock
  ·Rated current = 3 A
  ・ Housing material = PBT
  ・ Rated voltage = 250 V AC
  ·Length = 69.32 mm
  ·Depth = 12.55 mm
  ・ Maximum operating temperature = +105°C

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.40 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Plug connector series 560

  EDAC

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.87 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  D-SUB Pin Strip

  ECON CONNECT

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.41 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  D-SUB pin strip

  PROVERTHA

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.01 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Printed-circuit board connector, PCB direct plug, ZEC

  PHOENIX CONTACT

  Select to compare

  Configure now
  Starting from∗ ：	3.83 €
  Min. Shipping Days ：	79 Days

  *Unit price with basic configuration

• 

  Misumi, Waterproof, Single-Lever Hood (Straight)

  MISUMI

  [Features] MIAutomatic SteelIs original, low-cost, environmentally resistant and waterproof straight bonnet with single-lever base. It is a waterproof plug bonnet into which plugs of each series can be inserted according to the number of contacts. Fully compatible with the products of the main connector manufacturers. Connection to and disconnection from the mating connector can be performed with a single lever operation on the side of the base, facilitating attachment/detachment.

  • Volume Discount

  • IP65
  • For Power Supply
  • Lever Lock

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.42 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...