Adjustment plates for bull´s eye levels GN 2277 (Part Numbers - CAD Download)
- Volume Discount
Adjustment plates GN 2277.1 are used in combination with bull´s eye levels GN 2277, Type A.
The mounting bore holes offset by 120° allow the bull‘s eye levels and the mounting plate to be aligned in relation to the mounting surface. An alignment ball at the bottom surface of the adjustment plate serves as tilting point. Specific tightening torques of the bolts allow to be achieved, so that the bubble is located inside the marking ring once the horizontal alignment is reached.
The mounting bore holes offset by 120° allow the bull‘s eye levels and the mounting plate to be aligned in relation to the mounting surface. An alignment ball at the bottom surface of the adjustment plate serves as tilting point. Specific tightening torques of the bolts allow to be achieved, so that the bubble is located inside the marking ring once the horizontal alignment is reached.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Part Number
|
|---|
| 2277.1-NI-20 |
| 2277.1-NI-25 |
| 2277.1-NI-30 |
| 2277.1-NI-40 |
| 2277.1-NI-50 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Diameter d1 | |
|---|---|---|---|---|---|
4.02 € | 1 | Available | 7 Days | 20 | |
4.28 € | 1 | Available | 7 Days | 25 | |
4.68 € | 1 | Available | 7 Days | 30 | |
5.42 € | 1 | Available | 7 Days | 40 | |
7.00 € | 1 | Available | 7 Days | 50 |
Loading...
Basic information
| Material | NI-Stainless Steel |
|---|
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Metoda płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.