TAC Heran Transparent (Part Numbers)

The abrasion resistance performance is approximately 4 times that of TAC HERAN-N. A superior antistatic effect is achieved by the introduction a ground wire. Liquids are transported smoothly due to the extremely smooth inner surface. The transparent duct enables checking of the material being transported.

[Features]
· This product has 4 times the abrasion resistance of TAC HERAN-N (based on for initial value of 1 for TAC HERAN-N in the abrasion amount comparison test—eight hours after starting).
· The duct hose is transparent, which enables visually checking inside the duct.
· Superior anti-static effect due to the inclusion of a ground wire.
· Liquids are transported smoothly due to the extremely smooth inner surface.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Save
Similar products
Product data
CAD data not available

Data to be displayed: 30; 45; 60

Part Number
25106-38-[1-50/1]
25106-50-[1-50/1]
25106-65-[1-50/1]
25106-90-[1-20/1]
25106-100-[1-20/1]
25106-150-[1-20/1]
25106-200-[1-10/1]

Minimum order quantity	Standard Shipping Days ?	RoHS	Nominal Diameter (mm)	Outer Diameter (mm)	Allowable Bending Radius (mm)	Nominal Diameter (inch)	Allowable Pressure (Normal Temperature) (MPa)	Length (m)
1	11 Days	10	38	48.5	350	1 1/2	0.4	1 ～ 50
1	11 Days	10	50	61.4	550	2	0.4	1 ～ 50
1	11 Days	10	65	76.0	800	2 1/2	0.4	1 ～ 50
1	11 Days	10	90	102.0	1110	3 1/2	0.30	1 ～ 20
1	11 Days	10	100	117	1250	4	0.30	1 ～ 20
1	11 Days	10	150	169.4	2750	6	0.20	1 ～ 20
1	11 Days	10	200	226.4	4000	8	0.20	1 ～ 10

Basic information

Applicable Fluid / Usage	Powder / Cement / Grains	Cutting Service Usage	Available	Properties	Antistatic Performance / Abrasion Resistance / Transparency
Hose Material	Abrasion Resistance Special Urethane Resin+PVC+Grounding Wire	Mounting Metal Fittings	NA	Color	Transparency
Use Temperature Range, Suction(°C)	-10 – 50	Operating Temperature Range, Delivery Discharge(°C)	-10 – 50