Rejestracja

Tłumaczymy nasz sklep na język polski!

Wymaga to jednak czasu, ponieważ w ofercie mamy dużo artykułów, a na nasz sklep składa się wiele stron. Chwilowo nasz katalog produktów dostępny będzie w języku angielskim. Dziękujemy za cierpliwość!
Potwierdzono
  • Type
  • Environment
  • Inner Diameter d1(mm)
  • O.D. d2(mm)
  • Overall Length b1(mm)
  • Maximum Allowable PV Value Range(N/mm2•m/s)
  • Max. Allowable Velocity V(m/s)

    The value differs depending on the current lubrication, Refer to manufacturers' specifications.

  • Recommended Shaft Tolerance
  • Flange Outer Diameter d3(mm)
  • Type
  • CAD
  • Szacowane dni wysyłki
    • Wszystko
    • W ciągu 2 dni robocze
IGUS

Plain bearing bushes with flange / plastic (iglidur) / M250 / MFM (MFM-0103-02)

Plain bearing bushes with flange / plastic (iglidur) / M250 / MFM MFM-0103-02

Numer części:

MFM-0103-02
Wyczyść
Ilość:

Informacje o produkcie

iglidur® M250 | The Robust All-rounder according to DIN 2795, Flange Bearing (Form F)

Product Information


Excellent vibration dampening
The self lubricating plain bearings made from iglidur® M250 are defined by their impact strength, vibration dampening, and wear resistant properties. They excel in applications in which vibration dampening is necessary, for example, in fitness and packaging machines.
When to use it?
• When the bearings are exposed to high amounts of dirt
• When high vibration damping is necessary
• For low to medium speeds
• When mechanical reaming of the wall surface is necessary
• Resistant to edge loads
• High impact resistance
• Thick walled according to DIN 1850
When not to use it?
• For applications in wet areas
   ►iglidur® H
• When very high precision is necessary
   ►iglidur® P
• For very smooth shafts
   ►iglidur® J
• When a cost-effective wear resistant bearing is required
   ►iglidur® R
Typical application areas
• Agricultural machines
• Furniture/Industrial design
• Textile industry
• Doors and gates
• Machine building

Material Properties

General propertiesUnitiglidur® M250Testing method
Densityg/cm31.14 
Colour charcoal 
Max. moisture absorption at +23 °C/50 % r.h.% weight1.4DIN 53495
Max. water absorption% weight7.6 
Coefficient of sliding friction, dynamic, against steelμ0.18–0.40 
pv value, max. (dry)MPa · m/s0.12 
Mechanical properties
Flexural modulusMPa2,700DIN 53457
Flexural strength at +20 °CMPa112DIN 53452
Compressive strengthMPa52 
Max. recommended surface pressure (+20 °C)MPa20 
Shore-D hardness 79DIN 53505
Physical and thermal properties
Max. long-term application temperature°C+80 
Max. short-term application temperature°C+170 
Min. long-term application temperature°C–40 
Heat conductivityW/m · K0.24ASTM C 177
Coefficient of thermal expansion (at +23 °C)K–1 · 10–510DIN 53752
Electrical properties
Specific contact resistanceΩcm> 1013DIN IEC 93
Surface resistanceΩ> 1011DIN 53482
 

Dimensions

Flange Bearing (Form F)

2) Thickness < 1 mm: chamfer = 20°
 
Chamfer in relation to the d1
d1 [mm]:Ø 1–6Ø 6–12Ø 12–30Ø > 30
f [mm]:0.30.50.81.2



Dimensions [mm]
d1d1-d2d3b1b2Part No.
 Tolerance3) d13h13–0.14 
1.0+0.020
+0.080		3.05.02.01.0MFM-0103-02
1.54.06.02.01.0MFM-0104-02
2.05.08.03.01.5MFM-0205-03
2.56.09.03.01.5MFM-0206-03
3.06.09.04.01.5MFM-0306-04
4.0+0.030
+0.105		8.012.04.02.0MFM-0408-04
4.08.012.06.02.0MFM-0408-06
4.08.012.08.02.0MFM-0408-08
5.09.013.05.02.0MFM-0509-05
5.09.013.06.02.0MFM-0509-06
5.09.013.08.02.0MFM-0509-08
6.08.012.04.01.0MFM-0608-04
6.08.012.08.01.0MFM-0608-08
6.010.014.04.02.0MFM-0610-04
6.010.014.06.02.0MFM-0610-06
6.010.014.010.02.0MFM-0610-10
6.011.014.04.02.0MFM-0611-04
6.012.014.06.03.0MFM-0612-06
6.012.014.010.03.0MFM-0612-10
7.0+0.040
+0.130		11.015.06.02.0MFM-0711-06
7.011.015.08.02.0MFM-0711-08
8.09.013.05.50.5MFM-0809-055
8.010.015.05.51.0MFM-0810-05
8.010.015.07.51.0MFM-0810-07
8.010.015.09.51.0MFM-0810-09
8.011.013.05.02.0MFM-0811-05
8.011.013.08.02.0MFM-0811-08
8.012.016.06.02.0MFM-0812-06
8.012.016.08.02.0MFM-0812-08
8.012.016.012.02.0MFM-0812-12
8.014.018.06.03.0MFM-0814-06
8.014.018.010.03.0MFM-0814-10
8.014.016.06.03.0MFM-081416-06
8.014.016.010.03.0MFM-081416-10
9.014.019.06.02.0MFM-0914-06
9.014.019.010.02.0MFM-0914-10
9.014.019.014.02.0MFM-0914-14
10.012.018.07.01.0MFM-1012-07
10.012.018.09.01.0MFM-1012-09
10.012.018.012.01.0MFM-1012-12
10.012.018.017.01.0MFM-1012-17
10.014.019.09.02.0MFM-1014-09
10.014.019.010.02.0MFM-1014-10
10.014.017.514.01.0MFM-1014-14
10.014.017.519.01.0MFM-1014-19
10.014.017.524.01.0MFM-1014-24
10.014.017.534.01.0MFM-1014-34
10.014.019.08.02.0MFM-101419-08
10.014.019.012.01.5MFM-101419-12
10.014.020.012.02.0MFM-101420-12
10.016.022.08.03.0MFM-1016-08
10.016.022.010.03.0MFM-1016-10
10.016.022.016.03.0MFM-1016-16
10.016.020.06.03.0MFM-101620-06
10.016.020.010.03.0MFM-101620-10
12.0+0.050
+0.160		14.020.07.01.0MFM-1214-07
12.014.020.09.01.0MFM-1214-09
12.014.020.012.01.0MFM-1214-12
12.014.020.017.01.0MFM-1214-17
12.016.022.010.02.0MFM-1216-10
12.016.022.020.02.0MFM-1216-20
12.018.024.08.03.0MFM-1218-08
12.018.022.010.03.0MFM-1218-10
12.018.024.012.03.0MFM-1218-12
12.018.022.015.03.0MFM-1218-15
12.018.022.020.03.0MFM-1218-20
13.015.020.014.02.0MFM-1315-14
13.016.024.08.02.0MFM-131624-08
14.016.022.012.01.0MFM-1416-12
14.016.022.017.01.0MFM-1416-17
14.020.025.07.03.0MFM-1420-07
14.020.025.010.03.0MFM-1420-10
14.020.025.015.03.0MFM-1420-15
14.020.025.020.03.0MFM-1420-20
15.017.023.09.01.0MFM-1517-09
15.017.023.012.01.0MFM-1517-12
15.017.023.017.01.0MFM-1517-17
15.021.027.010.03.0MFM-1521-10
15.021.027.015.03.0MFM-1521-15
15.021.027.020.03.0MFM-1521-20
15.021.027.025.03.0MFM-1521-25
16.018.028.08.02.0MFM-1618-08/02
16.018.024.012.01.0MFM-1618-12
16.018.024.017.01.0MFM-1618-17
16.022.028.012.03.0MFM-1622-12
16.022.028.015.03.0MFM-1622-15
16.022.028.020.03.0MFM-1622-20
16.022.028.025.03.0MFM-1622-25
18.020.026.012.01.0MFM-1820-12
18.020.026.017.01.0MFM-1820-17
18.020.026.022.01.0MFM-1820-22
18.024.030.08.03.0MFM-1824-08
18.024.030.012.03.0MFM-1824-12
18.024.030.018.03.0MFM-1824-18
18.024.030.020.03.0MFM-1824-20
18.024.030.030.03.0MFM-1824-30
18.024.026.07.83.0MFM-182426-078
19.0+0.065
+0.195		24.027.012.02.0MFM-192427-12
20.023.030.011.51.5MFM-2023-11
20.023.030.016.51.5MFM-2023-16
20.023.030.021.51.5MFM-2023-21
20.026.032.015.03.0MFM-2026-15
20.026.032.020.03.0MFM-2026-20
20.026.028.012.03.0MFM-202628-12
20.026.032.030.03.0MFM-2026-30
22.028.034.015.03.0MFM-2228-15
22.028.034.020.03.0MFM-2228-20
22.028.034.030.03.0MFM-2228-30
24.030.036.015.03.0MFM-2430-15
24.030.036.020.03.0MFM-2430-20
24.030.036.030.03.0MFM-2430-30
25.028.035.011.51.5MFM-2528-11
25.028.035.016.51.5MFM-2528-16
25.028.035.021.51.5MFM-2528-21
25.032.038.012.04.0MFM-2532-12
25.032.038.015.04.0MFM-2532-15
25.032.038.020.04.0MFM-2532-20
25.032.038.030.04.0MFM-2532-30
25.032.038.040.04.0MFM-2532-40
27.034.040.020.04.0MFM-2734-20
27.034.040.030.04.0MFM-2734-30
27.034.040.040.04.0MFM-2734-40
28.036.042.020.04.0MFM-2836-20
28.036.042.030.04.0MFM-2836-30
28.036.042.040.04.0MFM-2836-40
30.034.042.016.02.0MFM-3034-16
30.034.042.026.02.0MFM-3034-26
30.035.044.020.04.0MFM-3035-20
30.038.044.020.04.0MFM-3038-20
30.038.044.030.04.0MFM-3038-30
30.038.044.040.04.0MFM-3038-40
32.0+0.080
+0.240		40.046.020.04.0MFM-3240-20
32.040.046.030.04.0MFM-3240-30
32.040.046.040.04.0MFM-3240-40
35.039.047.016.02.0MFM-3539-16
35.039.047.026.02.0MFM-3539-26
40.044.052.030.02.0MFM-4044-30
40.044.052.040.02.0MFM-4044-40
45.050.058.050.02.0MFM-4550-50
3) After press-fit.

Lista numerów części

Liczba pozycji
  • 1
    • Numer części
    MFM-0103-02

    Type

    Environment

    Inner Diameter d1

    (mm)

    O.D. d2

    (mm)

    Overall Length b1

    (mm)

    Maximum Allowable PV Value Range

    (N/mm2•m/s)

    Max. Allowable Velocity V

    (m/s)

    Recommended Shaft Tolerance

    Thickness t

    (mm)

    Flange Outer Diameter d3

    (mm)

    		RoHS?Minimalna wielkość zamówienia
    Flanged Type
    Standard
    1
    3
    2
    0.10 to 0.29
    0.8
    h9
    -
    5
    -
    1 szt.
    Cena jednostkowa (bez VAT)(Cena jednostkowa z podatkiem)
    Standardowa data wysyłki
    3.84 €
    ( 4.57 € )
    2 dni robocze
  • 1

    • Szczegółowe informacje

    Podstawowe informacje

    The self-lubricating plain bearing made from iglidur® M250 distinguishes itself through its impact strength, vibration dampening and wear resistance. They excel in applications in which vibration dampening is necessary, for example, in fitness and packaging machines.

    Podobne produktyZobacz wszystkie podobne produkty

    Nie znaleziono podobnych produktów dla tej pozycji.
    Numer części został potwierdzony