Rejestracja
Warunki filtrowania
  • Outer Diameter (D)(φ)
  • Work Material
  • Flute Length (ℓ)(mm)
  • Number of Flutes(sheet)
  • Shank Diameter (d)(mm)
  • Overall Length (L)(mm)
  • Processing Applications
  • Corner (C)(mm)
      [0.1–3/0.1mm jedn.]
    • Szacowane dni wysyłki
      • Wszystko
      • W ciągu 7 dni robocze
      • W ciągu 9 dni robocze
      • W ciągu 13 dni robocze

    Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill

    Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill
    • Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill
    • Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill

    Numer części:

    Znaleziono następującą liczbę niepotwierdzonych proponowanych produktów: 116.
      Ilość:

      Rysunek konturowy

      Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill:Related Image

      Lista numerów części

      Liczba pozycji

      Outer Diameter (D)

      (φ)

      Work Material

      Flute Length (ℓ)

      (mm)

      Number of Flutes

      (sheet)

      Coating

      Shank Diameter (d)

      (mm)

      Overall Length (L)

      (mm)

      Processing Applications

      Corner (C)

      (mm)

      Figure

      Minimalna wielkość zamówienia
      4
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      6
      2
      Non-Coated
      6
      45
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 1
      1
      1 szt.
      4.5
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      6.75
      2
      Non-Coated
      6
      45
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 1
      1
      1 szt.
      5
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      7.5
      2
      Non-Coated
      6
      45
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 1
      1
      1 szt.
      5.5
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      8.25
      2
      Non-Coated
      6
      45
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 1.2
      1
      1 szt.
      6
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      9
      2
      Non-Coated
      6
      45
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 1.2
      2
      1 szt.
      8
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      12
      2
      Non-Coated
      8
      60
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 1.4
      2
      1 szt.
      10
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      15
      2
      Non-Coated
      10
      70
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 3
      2
      1 szt.
      12
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      18
      2
      Non-Coated
      12
      75
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 3
      2
      1 szt.
      16
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      24
      2
      Non-Coated
      16
      100
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 3
      2
      1 szt.
      20
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      30
      2
      Non-Coated
      20
      105
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 3
      2
      1 szt.
      4
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      16
      2
      Non-Coated
      6
      60
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 1
      1
      1 szt.
      5
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      20
      2
      Non-Coated
      6
      60
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 1
      1
      1 szt.
      6
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      24
      2
      Non-Coated
      6
      60
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 1.2
      2
      1 szt.
      8
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      32
      2
      Non-Coated
      8
      100
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 1.4
      2
      1 szt.
      10
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      40
      2
      Non-Coated
      10
      100
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 3
      2
      1 szt.
      12
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      48
      2
      Non-Coated
      12
      100
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 3
      2
      1 szt.
      2
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      6
      2
      Non-Coated
      4
      45
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 0.5
      1
      1 szt.
      2.5
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      7.5
      2
      Non-Coated
      4
      45
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 0.5
      1
      1 szt.
      2.8
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      8.4
      2
      Non-Coated
      4
      45
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 0.5
      1
      1 szt.
      3
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      9
      2
      Non-Coated
      6
      45
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 0.7
      1
      1 szt.
      3.5
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      10.5
      2
      Non-Coated
      6
      45
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 0.7
      1
      1 szt.
      4
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      12
      2
      Non-Coated
      6
      50
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 1
      1
      1 szt.
      4.5
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      13.5
      2
      Non-Coated
      6
      50
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 1
      1
      1 szt.
      5
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      15
      2
      Non-Coated
      6
      55
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 1
      1
      1 szt.
      5.5
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      16.5
      2
      Non-Coated
      6
      55
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 1.2
      1
      1 szt.
      6
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      18
      2
      Non-Coated
      6
      60
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 1.2
      2
      1 szt.
      8
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      24
      2
      Non-Coated
      8
      70
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 1.4
      2
      1 szt.
      10
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      30
      2
      Non-Coated
      10
      80
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 3
      2
      1 szt.
      12
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      36
      2
      Non-Coated
      12
      85
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 3
      2
      1 szt.
      16
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      48
      2
      Non-Coated
      16
      110
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 3
      2
      1 szt.
      20
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      60
      2
      Non-Coated
      20
      130
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 3
      2
      1 szt.
      4
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      14
      2
      Non-Coated
      6
      50
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 1
      1
      1 szt.
      5
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      17.5
      2
      Non-Coated
      6
      55
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 1
      1
      1 szt.
      6
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      21
      2
      Non-Coated
      6
      60
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 1.2
      2
      1 szt.
      8
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      28
      2
      Non-Coated
      8
      70
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 1.4
      2
      1 szt.
      10
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      35
      2
      Non-Coated
      10
      80
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 3
      2
      1 szt.
      12
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      42
      2
      Non-Coated
      12
      95
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 3
      2
      1 szt.
      2
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      4
      2
      Non-Coated
      4
      40
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 0.5
      1
      1 szt.
      2.5
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      5
      2
      Non-Coated
      4
      40
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 0.5
      1
      1 szt.
      2.8
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      5.6
      2
      Non-Coated
      4
      40
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 0.5
      1
      1 szt.
      3
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      6
      2
      Non-Coated
      6
      45
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 0.7
      1
      1 szt.
      3.5
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      7
      2
      Non-Coated
      6
      45
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 0.7
      1
      1 szt.
      4
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      8
      2
      Non-Coated
      6
      45
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 1
      1
      1 szt.
      4.5
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      9
      2
      Non-Coated
      6
      45
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 1
      1
      1 szt.
      5
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      10
      2
      Non-Coated
      6
      45
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 1
      1
      1 szt.
      5.5
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      11
      2
      Non-Coated
      6
      45
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 1.2
      1
      1 szt.
      6
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      12
      2
      Non-Coated
      6
      45
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 1.2
      2
      1 szt.
      8
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      16
      2
      Non-Coated
      8
      55
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 1.4
      2
      1 szt.
      10
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      20
      2
      Non-Coated
      10
      65
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 3
      2
      1 szt.
      12
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      24
      2
      Non-Coated
      12
      75
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 3
      2
      1 szt.
      16
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      32
      2
      Non-Coated
      16
      105
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 3
      2
      1 szt.
      20
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      40
      2
      Non-Coated
      20
      110
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 3
      2
      1 szt.
      4
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      10
      2
      Non-Coated
      6
      50
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 1
      1
      1 szt.
      5
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      12.5
      2
      Non-Coated
      6
      55
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 1
      1
      1 szt.
      6
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      15
      2
      Non-Coated
      6
      60
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 1.2
      2
      1 szt.
      8
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      20
      2
      Non-Coated
      8
      70
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 1.4
      2
      1 szt.
      10
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      25
      2
      Non-Coated
      10
      80
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 3
      2
      1 szt.
      12
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      30
      2
      Non-Coated
      12
      85
      Flat Surface / Side Surface / Groove / Inclined Cutting
      0.1 ~ 3
      2
      1 szt.
      3
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      4.5
      4
      Non-Coated
      6
      45
      Flat Surface / Side Surface / Inclined Cutting
      0.1 ~ 0.7
      1
      1 szt.
      4
      General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
      6
      4
      Non-Coated
      6
      45
      Flat Surface / Side Surface / Inclined Cutting
      0.1 ~ 1
      1
      1 szt.
      Cena jednostkowa (bez VAT)(Cena jednostkowa z podatkiem)
      Standardowa data wysyłki
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze
      -
      ( - )
      7 dni robocze

      Szczegółowe informacje

      Podstawowe informacje

      [Features]
      -Alteration cutter that can determine the corner chamfer size of carbide cutters in 0.1 mm steps
      -Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices etc.

      Specyfikacja i cena

      Specifications

      Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill:Related Image

      Model Number
      SEC-CEM2B / TSC-CEM2B
      SEC-CEM4B
      / TSC-CEM4B (1.5 D Blade Length Type)
      Flute Diameter
      D
      Corner C
      0.1 mm Increment Designation
      Blade Length
      Overall Length
      L
      Shank Diameter
      d
      Figure
      20.1 ~ 0.534041
      2.50.1 ~ 0.53.754041
      30.1 ~ 0.74.54561
      3.50.1 ~ 0.75.254561
      40.1 ~ 1.064561
      4.50.1 ~ 1.06.754561
      50.1 ~ 1.07.54561
      5.50.1 ~ 1.08.254561
      60.1 ~ 1.294562
      80.1 ~ 1.4126082
      100.1 ~ 3.01570102
      120.1 ~ 3.01875122
      160.1 ~ 3.024100162
      200.1 ~ 3.030105202

      Model Number
      SEC-CEM2S / TSC-CEM2S
      SEC-CEM4S
      /TSC-CEM4S (2 D Blade Length Type)
      Flute Diameter
      D
      Corner C
      0.1 mm Increment Designation
      Blade Length
      Overall Length
      L
      Shank Diameter
      d
      Figure
      20.1 ~ 0.544041
      2.50.1 ~ 0.554041
      2.80.1 ~ 0.55.64041
      30.1 ~ 0.764561
      3.50.1 ~ 0.774561
      40.1 ~ 1.084561
      4.50.1 ~ 1.094561
      50.1 ~ 1.0104561
      5.50.1 ~ 1.0114561
      60.1 ~ 1.2124562
      80.1 ~ 1.4165582
      100.1 ~ 3.02065102
      120.1 ~ 3.02475122
      160.1 ~ 3.032100162
      200.1 ~ 3.040105202

      Model Number
      SEC-CEM2SR / TSC-CEM2SR (2.5 D Blade Length Type)
      Flute Diameter
      D
      Corner C
      0.1 mm Increment Designation
      Blade Length
      Overall Length
      L
      Shank Diameter
      d
      Figure
      30.1 ~ 0.77.54561
      40.1 ~ 1.0105061
      50.1 ~ 1.012.55561
      60.1 ~ 1.2156062
      80.1 ~ 1.4207082
      100.1 ~ 3.02580102
      120.1 ~ 3.03085122

      Model Number
      SEC-CEM2R / TSC-CEM2R
      SEC-CEM4R
      / TSC-CEM4R (3D Blade Length Type)
      Flute Diameter
      D
      Corner C
      0.1 mm Increment Designation
      Blade Length
      Overall Length
      L
      Shank Diameter
      d
      Figure
      20.1 ~ 0.564541
      2.50.1 ~ 0.57.54541
      2.80.1 ~ 0.58.44541
      30.1 ~ 0.794561
      3.50.1 ~ 0.710.54561
      40.1 ~ 1.0125061
      4.50.1 ~ 1.013.55061
      50.1 ~ 1.0155561
      5.50.1 ~ 1.016.55561
      60.1 ~ 1.2186062
      80.1 ~ 1.4247082
      100.1 ~ 3.03080102
      120.1 ~ 3.03685122
      160.1 ~ 3.048115162
      200.1 ~ 3.060125202

      Model Number
      SEC-CEM2RL / TSC-CEM2RL (3.5 D Blade Length Type)
      Flute Diameter
      D
      Corner C
      0.1 mm Increment Designation
      Blade Length
      Overall Length
      L
      Shank Diameter
      d
      Figure
      30.1 ~ 0.710.54561
      40.1 ~ 1.0145061
      50.1 ~ 1.017.55561
      60.1 ~ 1.2216062
      80.1 ~ 1.4287082
      100.1 ~ 3.03580102
      120.1 ~ 3.04295122

      Model Number
      SEC-CEM2L / TSC-CEM2L (4 D Blade Length Type)
      Flute Diameter
      D
      Corner C
      0.1 mm Increment Designation
      Blade Length
      Overall Length
      L
      Shank Diameter
      d
      Figure
      30.1 ~ 0.7125061
      40.1 ~ 1.0166061
      50.1 ~ 1.0206061
      60.1 ~ 1.2246062
      80.1 ~ 1.43210082
      100.1 ~ 3.040100102
      120.1 ~ 3.048100122


      For Cutting Conditions, Refer to >>Click here.