Tłumaczymy nasz sklep na język polski!
- Outer Diameter (D)(φ)
- 1
- R Size(mm)
- 0.2
- Flute Length (ℓ)(mm)
- 2
- Overall Length (L)(mm)
- 40
- Shank Diameter (d)(mm)
- 4
- R Precision(μm)
- Additional Classification
- Type
- Szacowane dni wysyłki
- Wszystko
- W ciągu 5 dni robocze
TSC series carbide radius end mill, 2-flute / short model (TSC-CR-EM2S1-R0.2)
Umieść kursor myszy nad ilustracją, aby ją powiększyć
Rysunek konturowy
Szczegółowe informacje
Podstawowe informacje
[Features]
-Short cutting edge length with cutting edge radius attached to the 2-flute general purpose cutters
-Radius cutting edge is also effective in suppressing chipping
-Can be reground. Please refer to the "Regrinding Service" page for application information, scope of service, pricing, etc.
Specyfikacja i cena
Specifications
Model Number
TSC-CR-EM2S
| Outer Diameter D |
Radius R | Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | ● Stocked Product □ Manufactured Product |
||||||||
| 1 | 0.1 | 0.2 | 0.3 | 2 | 40 | 4 | 1 | ● | ||||||
| 1.5 | 0.1 | 0.2 | 0.3 | 0.5 | 3 | 40 | 4 | 1 | ● | |||||
| 2 | 0.1 | 0.2 | 0.3 | 0.4 | 0.5 | 4 | 40 | 4 | 1 | ● | ||||
| 2.5 | 0.1 | 0.2 | 0.3 | 0.5 | 5 | 40 | 4 | 1 | ● | |||||
| 0.4 | □ | |||||||||||||
| 2.8 | 0.1 - 0.5 | 5.6 | 40 | 4 | 1 | □ | ||||||||
| 3 | 0.1 | 0.2 | 0.3 | 0.4 | 0.5 | 1 | 6 | 45 | 6 | 1 | ● | |||
| 0.6 - 0.7 | □ | |||||||||||||
| 3.5 | 0.1 - 0.7 | 7 | 45 | 6 | 1 | □ | ||||||||
| 4 | 0.2 | 0.3 | 0.4 | 0.5 | 1 | 8 | 45 | 6 | 1 | ● | ||||
| 0.1 - 0.9 | □ | |||||||||||||
| 4.5 | 0.1 - 1.2 | 9 | 45 | 6 | 1 | □ | ||||||||
| 5 | 0.1 | 0.2 | 0.3 | 0.5 | 1 | 10 | 45 | 6 | 1 | ● | ||||
| 0.4 - 1.5 | □ | |||||||||||||
| 5.5 | 0.1 ~ 1.7 | 11 | 45 | 6 | 1 | □ | ||||||||
| 6 | 0.2 | 0.3 | 0.5 | 1 | 1.5 | 2 | 12 | 45 | 6 | 2 | ● | |||
| 0.1 ~ 2.0 | □ | |||||||||||||
| 8 | 0.2 | 0.3 | 0.5 | 1 | 16 | 55 | 8 | 2 | ● | |||||
| 0.1 ~ 3.0 | □ | |||||||||||||
| 10 | 0.5 | 1 | 1.5 | 2 | 3 | 20 | 65 | 10 | 2 | ● | ||||
| 0.1 ~ 3.0 | □ | |||||||||||||
| 12 | 0.5 | 1 | 1.5 | 2 | 24 | 75 | 12 | 2 | ● | |||||
| 0.1 ~ 3.0 | □ | |||||||||||||
| 16 | 0.1 ~ 3.0 | 32 | 105 | 16 | 2 | □ | ||||||||
| 20 | 0.1 ~ 3.0 | 40 | 110 | 20 | 2 | □ | ||||||||
[ ! ]The flute length (ℓ) and total length (L) is approximately D x 0.5 shorter (up to approximately 5 mm) for manufactured products.
[ ! ]Manufactured products with a TS coating are shipped on the 10th day.
For Cutting Conditions, Refer to >>Click here.
Funkcje i przykłady użycia
More Information
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and is ideal for high speed machining / dry machining.
● A general purpose 2-flute end mill product with added high-accuracy curvature.
● The radial blade tip is also useful to prevent chipping.