Rejestracja

Tłumaczymy nasz sklep na język polski!

Wymaga to jednak czasu, ponieważ w ofercie mamy dużo artykułów, a na nasz sklep składa się wiele stron. Chwilowo nasz katalog produktów dostępny będzie w języku angielskim. Dziękujemy za cierpliwość!
Warunki filtrowania
  • Stan magazynowy
  • Shape (Head, Outline View)
  • Material
    • Steel
    • Stainless Steel
  • Surface Treatment
    • Hard Chrome Plating
  • [D] Diameter (Mounting Side)(mm)
  • [P] Diameter (Head)(mm)
    [3–20/0.01mm jedn.]
  • [M] Diameter (Screw)(mm)
  • [L] Length (Pin)(mm)
    [8–40/1mm jedn.]
  • [B] Length (Head)(mm)
    [2–25/0.1mm jedn.]
  • CAD
  • Szacowane dni wysyłki
    • Wszystko
    • Możliwa wysyłka tego samego dnia
    • W ciągu 5 dni robocze
    • W ciągu 6 dni robocze
    • W ciągu 9 dni robocze
  • Locating pins / head shape selectable / small, chamfered flat head / internal thread

    Numer części:

    Znaleziono następującą liczbę niepotwierdzonych proponowanych produktów: 269.
    Ilość:

    Rysunek konturowy i tabela specyfikacji

    (Round)

    (Diamond)

    a = 1.0
    d = P - 0.2
    [ ! ] Relief dimensions are reference values.
     

    [ ! ] EN 1.4301 Equiv. products may not be polished and have no centering hole.

    [ ! ] For EN 1.4125 Equiv., an identification groove is provided at any position on D part.

    [ ! ] When D = P, relief is also applied.

    Material
    [M] Material
    [S] Surface Treatment
    [H] Hardness
    P Fixed
    P Configurable
    P, L, B Configurable
    No.
    Type
    Shape Code
    Type
    Shape Code
    Type
    Shape Code
    (1)
    EN 1.2510 Equiv.
    Treated Hardness: 60 to 63 HRC
    JPS
     
    JPS
     
    FPS
     
    (2)
    EN 1.2510 Equiv.
    Hard Chrome Plating
    Treaded Hardness: 50 to 55 HRC
     
    GJPS
    TA
    GFPS
    TA
    Plating Hardness: 750 HV or more
    TB
    (Round)
    (Round)
    (4)
    EN 1.4301 Equiv.*
    SJPS
    (Round)
    SJPS
    TD
    SFPS
    TD
    (5)
    EN 1.4301 Equiv.
    Hard Chrome Plating
    Plating Hardness: 750 HV or more
     
    (Diamond)
    HFPS
    (Diamond)
    (6)
    EN 1.4125 Equiv.
    Treaded Hardness: 50 to 55 HRC
    CJPS
     
    CJPS
     
    CFPS
     
     
     
     
     
    * For P Fixed Type, it is EN 1.4301 Equiv.

    Specification Table

    Part NumberPLB
       
    Type Config. D
    JPS TB 64    
    JPS TA 65.01  
    FPS TA 10P8.52L12B6.4
    ■P Fixed Type
    Part NumberP SelectionLBmM
    (Coarse)
    * Tightening Torque
    N・cm
    TypeConfig.DD dim. Tolerance g6
    JPS
    SJPS
    CJPS
    TB (Round) 6−0.004
    −0.012
     4 5       1052M3985
     8−0.005
    −0.014
       6 7     1563M54618
    10    7 8 910  8
    12−0.006
    −0.017
         8 9101112
     
    Mass (g) Ref. Value
    D
    P
    EN 1.2510 Equiv.
    EN 1.4301 Equiv.
    EN 1.4125 Equiv.
    6
    4
    2.44
    2.48
    2.46
    5
    2.71
    2.76
    2.74
    8
    6
    6.02
    6.13
    6.08
    7
    6.50
    6.62
    6.56
    10
    7
    10.44
    10.63
    10.53
    8
    11.18
    11.38
    11.28
    9
    12.02
    12.23
    12.13
    10
    12.96
    13.19
    13.07
    12
    8
    15.25
    15.52
    15.39
    9
    16.09
    16.38
    16.23
    10
    17.03
    17.33
    17.18
    11
    18.07
    18.39
    18.23
    12
    19.20
    19.54
    19.37
    ■P Configurable
    Part Number
    P
    L
    B
    m
    (W)
    M
    * Tightening Torque
    Type
    Config.
    D
    D dim. Tolerance g6
    0.01 mm Increments
    (Coarse)
    N・cm
     
     
    5
    -0.004
    -0.012
    3.00 to 5.00
    10
    5
    2
    1.2
    M2
    3
     
     
    6
    4.00 to 6.00
    1.5
    M3
    98
    5
     
     
    6T
    M2.6
    4
    JPS
     
    8
    -0.005
    -0.014
    6.00 to 8.00
    15
    6
    3
    1.8
    M5
    461
    8
    GJPS
    TA (Round)
    8T
    M4
    225
    6
    SJPS
    TD (Diamond)
    10
    7.00 to 10.00
    8
    2.2
    M5
    461
    8
    CJPS
     
    12
    -0.006
    -0.017
    7.00 to 12.00
    2.5
     
     
    13
    8.00 to 13.00
    22
    4
    3
    M8
    1911
    12
     
     
    16
    10.00 to 16.00
    10
    4
     
     
    20
    -0.007
    -0.020
    13.00 to 20.00
    30
    5
    ■P, L, B Configurable
    Part NumberP
    0.01 mm Increments
    L
    1 mm Increments
    B
    0.1 mm Increments
    m(W)M
    (Coarse)
    * Tightening Torque
    N・cm
    TypeConfig.DD dim. Tolerance g6
    FPS
    GFPS
    SFPS
    HFPS
    CFPS
    TA (Round)
    TD (Diamond)
     5−0.004
    −0.012
    3.00 to 5.008 to 102.0 to 15.0 (10.0)21.2M23
     64.00 to 6.008 (9)Up to 172.0 to 15.01.5M3985
     6TM2.64
     8−0.005
    −0.014
    6.00 to 8.0011 (12)Up to 212.0 to 30.0 (15.0)31.8M54618
     8TM42256
    10 7.00 to 10.0011 (12)Up to 233.0 to 30.0 (25.0)2.2M54618
    10T8 (12)Up to 23M42256
    12−0.006
    −0.017
     7.00 to 12.0012 to 243.0 to 30.0 (25.0)2.5M54618
    12T8 (12)Up to 18M42256
    13 8.00 to 13.0013 (14)Up to 265.0 to 30.0 (25.0)43M8191110
    13T10 (14)Up to 20M67849
    1610.00 to 16.0016 to 325.0 to 30.04M8191112
    16T10 (14)Up to 24M67849
    20−0.007
    −0.020
    13.00 to 20.0020 to 405.0 to 30.05M8191112
    20T12 (18)Up to 30M67849
    [!] L, B dimensions in () are applicable to Diamond Shape. [!] Holes may go through.
    [!] Pins having "T" inserted after the D dimension have one size smaller thread diameter and larger wall thickness. (Actual D dimension is the number without "T".)
    *The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.

    Alterations

    [NG] Alterations are not available for P Fixed Type.
    Alterations
    Code
    Alteration DetailsApplication ConditionsOrdering Example
    TCLength of Tapered Point


     
    Changes the m dimension. 1 mm Increments
    [!] B + m ≥ TC + 2 (Straight Section min. 2 mm)
    [!] P/2-TC × tan15° (≒ 0.27) > 0.5 (Tip ø1.0 min.)
    [!] B dimension changes when TC is specified. (Changed B dimension = B + m - TC)
    [NG] Combination with RAC or LAC is not available
    DTC
    53 to 7
    63 to 9
    84 to 13
    104 to 16
    DTC
    124 to 20
    134 to 21
    165 to 22
    20
    FPSTA10-P8.00-L13-B6.4-TC7
    RCAdds Sphere Tip
    Changes the relief to R0.5.
    [ ! ] Applicable when D - P ≥ 2
    [NG] Combination with LAC is not available
    FPSTA10-P8.00-L13-B6.4-RC
    RACAdds a hex socket




    Adds hex socket
    [ ! ] Applicable to P, L, B Dimension Configurable Type only
    [ ! ] Round Shape is applicable to D ≥ 8, and Diamond Shape to D ≥ 10
    [NG] Combination with TC or LAC is not available
    DApplicable DimensionsHex Hole Dimensions
    PLBES
    8 8T6.00 or more13 or more6.0 or more23
    10 10T7.00 or more
    12 12T
    13 13T9.00 or more15 or more2.54
    16 16T10.00 or more17 or more35
    20 20T13.00 or more22 or more46
    FPSTA10-P8.00-L13-B6.4-RAC
    LACAdds a wrench hole




    Adds a wrench hole.
    [ ! ] Round Shape is applicable to D ≥ 8, and Diamond Shape to D ≥ 10

    [ ! ] Diamond Shape Hole is drilled on the diamond head vertically
    but with arbitrary orientation of their diamond surfaces against those of the diamond head.

    [ ! ] Applicable when Q + 1.5 ≤ B
    [NG] Combination with TC or RAC is not available
    DApplicable Dimensions
    PB
    8 8T6.00 or more5.0 or more
    10 10T7.00 (8.00) ~
    12 12T7.00 (8.00) ~
    13 13T8.00 or more
    16 16T10.00 or more
    20 20T13.00 or more10.0 or more

    Wrench Hole Dimensions

    PQ
    6.00 to 9.992
    10.00 to 15.994
    16.00 or more5
    FPSTA10-P8.00-L13-B6.4-LAC

    Lista numerów części

    Liczba pozycji
    Numer części

    Shape (Head, Outline View)

    Material

    Surface Treatment

    Heat Treatment

    [D] Diameter (Mounting Side)

    (mm)

    [P] Diameter (Head)

    (mm)

    [M] Diameter (Screw)

    (mm)

    [L] Length (Pin)

    (mm)

    [B] Length (Head)

    (mm)

    Dimension Configurable Type

    RoHS?Minimalna wielkość zamówienia
    Round
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    5
    3 ~ 5
    -
    8 ~ 10
    2 ~ 10
    P Dimension, L Dimension, B Dimension Configurable
    10
    1 szt.
    Round
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    6
    4 ~ 6
    3
    8 ~ 17
    2 ~ 12
    P Dimension, L Dimension, B Dimension Configurable
    10
    1 szt.
    Round
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    6
    4 ~ 6
    3
    8 ~ 17
    13 ~ 15
    P Dimension, L Dimension, B Dimension Configurable
    10
    1 szt.
    Round
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    6T
    4 ~ 6
    2.6
    8 ~ 12
    2 ~ 12
    P Dimension, L Dimension, B Dimension Configurable
    10
    1 szt.
    Round
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    8
    6 ~ 8
    5
    11 ~ 16
    2 ~ 15
    P Dimension, L Dimension, B Dimension Configurable
    10
    1 szt.
    Round
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    8T
    6 ~ 8
    4
    11 ~ 16
    2 ~ 15
    P Dimension, L Dimension, B Dimension Configurable
    10
    1 szt.
    Round
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    10
    7 ~ 10
    5
    11 ~ 20
    3 ~ 20
    P Dimension, L Dimension, B Dimension Configurable
    10
    1 szt.
    Round
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    10T
    7 ~ 10
    4
    8 ~ 16
    3 ~ 20
    P Dimension, L Dimension, B Dimension Configurable
    10
    1 szt.
    Round
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    12
    7 ~ 12
    5
    12 ~ 24
    3 ~ 20
    P Dimension, L Dimension, B Dimension Configurable
    10
    1 szt.
    Round
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    12T
    7 ~ 12
    4
    8 ~ 18
    3 ~ 20
    P Dimension, L Dimension, B Dimension Configurable
    10
    1 szt.
    Round
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    13
    8 ~ 13
    8
    13 ~ 26
    5 ~ 20
    P Dimension, L Dimension, B Dimension Configurable
    10
    1 szt.
    Round
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    13T
    8 ~ 13
    6
    10 ~ 20
    5 ~ 20
    P Dimension, L Dimension, B Dimension Configurable
    10
    1 szt.
    Round
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    16
    10 ~ 16
    8
    16 ~ 32
    5 ~ 20
    P Dimension, L Dimension, B Dimension Configurable
    10
    1 szt.
    Round
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    16T
    10 ~ 16
    6
    10 ~ 24
    5 ~ 20
    P Dimension, L Dimension, B Dimension Configurable
    10
    1 szt.
    Round
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    20
    13 ~ 20
    8
    20 ~ 40
    5 ~ 20
    P Dimension, L Dimension, B Dimension Configurable
    10
    1 szt.
    Round
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    20T
    13 ~ 20
    6
    12 ~ 30
    5 ~ 20
    P Dimension, L Dimension, B Dimension Configurable
    10
    1 szt.
    Diamond
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    5
    3 ~ 5
    -
    8 ~ 10
    2 ~ 10
    P Dimension, L Dimension, B Dimension Configurable
    10
    1 szt.
    Diamond
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    6
    4 ~ 6
    3
    9 ~ 17
    2 ~ 15
    P Dimension, L Dimension, B Dimension Configurable
    10
    1 szt.
    Diamond
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    6T
    4 ~ 6
    2.6
    9 ~ 12
    2 ~ 12
    P Dimension, L Dimension, B Dimension Configurable
    10
    1 szt.
    Diamond
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    8
    -
    5
    -
    -
    P Dimension, L Dimension, B Dimension Configurable
    10
    1 szt.
    Diamond
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    8T
    6 ~ 8
    4
    12 ~ 16
    2 ~ 15
    P Dimension, L Dimension, B Dimension Configurable
    10
    1 szt.
    Diamond
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    10
    7 ~ 10
    5
    12 ~ 23
    3 ~ 25
    P Dimension, L Dimension, B Dimension Configurable
    10
    1 szt.
    Diamond
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    10T
    7 ~ 10
    4
    12 ~ 16
    3 ~ 20
    P Dimension, L Dimension, B Dimension Configurable
    10
    1 szt.
    Diamond
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    12
    7 ~ 12
    5
    12 ~ 24
    3 ~ 20
    P Dimension, L Dimension, B Dimension Configurable
    10
    1 szt.
    Diamond
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    12T
    7 ~ 12
    4
    12 ~ 18
    3 ~ 20
    P Dimension, L Dimension, B Dimension Configurable
    10
    1 szt.
    Diamond
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    13
    -
    8
    -
    -
    P Dimension, L Dimension, B Dimension Configurable
    10
    1 szt.
    Diamond
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    13T
    8 ~ 13
    6
    14 ~ 20
    5 ~ 20
    P Dimension, L Dimension, B Dimension Configurable
    10
    1 szt.
    Diamond
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    16
    10 ~ 16
    8
    16 ~ 32
    5 ~ 20
    P Dimension, L Dimension, B Dimension Configurable
    10
    1 szt.
    Diamond
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    16T
    10 ~ 16
    6
    14 ~ 24
    5 ~ 20
    P Dimension, L Dimension, B Dimension Configurable
    10
    1 szt.
    Diamond
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    20
    13 ~ 20
    8
    20 ~ 40
    5 ~ 20
    P Dimension, L Dimension, B Dimension Configurable
    10
    1 szt.
    Diamond
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    20T
    13 ~ 20
    6
    18 ~ 30
    5 ~ 20
    P Dimension, L Dimension, B Dimension Configurable
    10
    1 szt.
    Round
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    5
    3 ~ 5
    -
    10
    5
    P Dimension, L Dimension, B Dimension Configurable
    10
    1 szt.
    Round
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    6
    4 ~ 6
    3
    10
    5
    P Dimension Configurable
    10
    1 szt.
    Round
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    6T
    4 ~ 6
    2.6
    10
    5
    P Dimension Configurable
    10
    1 szt.
    Round
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    8
    6 ~ 8
    5
    15
    6
    P Dimension Configurable
    10
    1 szt.
    Round
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    8T
    6 ~ 8
    4
    15
    6
    P Dimension Configurable
    10
    1 szt.
    Round
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    10
    7 ~ 10
    -
    15
    8
    P Dimension Configurable
    10
    1 szt.
    Round
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    12
    7 ~ 12
    -
    15
    8
    P Dimension Configurable
    10
    1 szt.
    Round
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    13
    8 ~ 13
    -
    22
    8
    P Dimension Configurable
    10
    1 szt.
    Round
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    16
    10 ~ 16
    -
    22
    10
    P Dimension Configurable
    10
    1 szt.
    Round
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    20
    13 ~ 20
    -
    30
    10
    P Dimension Configurable
    10
    1 szt.
    Round
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    6
    4
    -
    10
    5
    P Dimension Fixed
    10
    1 szt.
    Round
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    6
    5
    -
    10
    5
    P Dimension Fixed
    10
    1 szt.
    Round
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    8
    6
    -
    15
    6
    P Dimension Fixed
    10
    1 szt.
    Round
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    8
    7
    -
    15
    6
    P Dimension Fixed
    10
    1 szt.
    Round
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    10
    7
    -
    15
    8
    P Dimension Fixed
    10
    1 szt.
    Round
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    10
    8
    -
    15
    8
    P Dimension Fixed
    10
    1 szt.
    Round
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    10
    9
    -
    15
    8
    P Dimension Fixed
    10
    1 szt.
    Round
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    10
    10
    -
    15
    8
    P Dimension Fixed
    10
    1 szt.
    Round
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    12
    8
    -
    15
    8
    P Dimension Fixed
    10
    1 szt.
    Round
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    12
    9
    -
    15
    8
    P Dimension Fixed
    10
    1 szt.
    Round
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    12
    10
    -
    15
    8
    P Dimension Fixed
    10
    1 szt.
    Round
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    12
    11
    -
    15
    8
    P Dimension Fixed
    10
    1 szt.
    Round
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    12
    12
    -
    15
    8
    P Dimension Fixed
    10
    1 szt.
    Diamond
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    5
    3 ~ 5
    -
    10
    5
    P Dimension, L Dimension, B Dimension Configurable
    10
    1 szt.
    Diamond
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    6
    4 ~ 6
    3
    10
    5
    P Dimension Configurable
    10
    1 szt.
    Diamond
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    6T
    4 ~ 6
    2.6
    10
    5
    P Dimension Configurable
    10
    1 szt.
    Diamond
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    8
    6 ~ 8
    5
    15
    6
    P Dimension Configurable
    10
    1 szt.
    Diamond
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    8T
    6 ~ 8
    4
    15
    6
    P Dimension Configurable
    10
    1 szt.
    Diamond
    [Stainless Steel] EN 1.4037 Equiv.
    No Treatment
    Directly Quenched
    10
    7 ~ 10
    -
    15
    8
    P Dimension Configurable
    10
    1 szt.
    Cena jednostkowa (bez VAT)(Cena jednostkowa z podatkiem)
    Standardowa data wysyłki
    -
    ( - )
    6 dni robocze
    -
    ( - )
    6 dni robocze
    -
    ( - )
    6 dni robocze
    -
    ( - )
    6 dni robocze
    -
    ( - )
    6 dni robocze
    -
    ( - )
    6 dni robocze
    -
    ( - )
    6 dni robocze
    -
    ( - )
    6 dni robocze
    -
    ( - )
    6 dni robocze
    -
    ( - )
    6 dni robocze
    -
    ( - )
    6 dni robocze
    -
    ( - )
    6 dni robocze
    -
    ( - )
    6 dni robocze
    -
    ( - )
    6 dni robocze
    -
    ( - )
    6 dni robocze
    -
    ( - )
    6 dni robocze
    -
    ( - )
    6 dni robocze
    -
    ( - )
    6 dni robocze
    -
    ( - )
    6 dni robocze
    38.60 €
    ( 45.93 € )
    6 dni robocze
    -
    ( - )
    6 dni robocze
    -
    ( - )
    6 dni robocze
    -
    ( - )
    6 dni robocze
    -
    ( - )
    6 dni robocze
    -
    ( - )
    6 dni robocze
    40.64 €
    ( 48.36 € )
    6 dni robocze
    -
    ( - )
    6 dni robocze
    -
    ( - )
    6 dni robocze
    -
    ( - )
    6 dni robocze
    -
    ( - )
    6 dni robocze
    -
    ( - )
    6 dni robocze
    -
    ( - )
    9 dni robocze
    -
    ( - )
    9 dni robocze
    -
    ( - )
    9 dni robocze
    -
    ( - )
    9 dni robocze
    -
    ( - )
    9 dni robocze
    -
    ( - )
    9 dni robocze
    -
    ( - )
    9 dni robocze
    -
    ( - )
    9 dni robocze
    -
    ( - )
    9 dni robocze
    -
    ( - )
    9 dni robocze
    14.34 €
    ( 17.06 € )
    6 dni robocze
    14.34 €
    ( 17.06 € )
    6 dni robocze
    14.85 €
    ( 17.67 € )
    6 dni robocze
    14.85 €
    ( 17.67 € )
    6 dni robocze
    15.38 €
    ( 18.30 € )
    6 dni robocze
    15.38 €
    ( 18.30 € )
    6 dni robocze
    15.38 €
    ( 18.30 € )
    6 dni robocze
    15.38 €
    ( 18.30 € )
    6 dni robocze
    15.53 €
    ( 18.48 € )
    6 dni robocze
    15.53 €
    ( 18.48 € )
    6 dni robocze
    15.53 €
    ( 18.48 € )
    6 dni robocze
    15.53 €
    ( 18.48 € )
    6 dni robocze
    15.53 €5.28 €
    ( 6.28 € )
    Towar dostępny w magazynie: 1 dzień roboczyDostępne z opcją wysyłki tego samego dnia
    -
    ( - )
    9 dni robocze
    -
    ( - )
    9 dni robocze
    -
    ( - )
    9 dni robocze
    -
    ( - )
    9 dni robocze
    -
    ( - )
    9 dni robocze
    -
    ( - )
    9 dni robocze

    Szczegółowe informacje

    Podstawowe informacje

    Kontury i specyfikacja

    App. Example

    Machined Product

    Fixture Body

    General Information - Locating Pins / Positioning Pins / Centring Pins

     

    Selection details of receiving pins/locating pins/ centering pins

    - Material: steel, stainless steel, aluminum, plastic
    - Coatings: burnished, nickel-plated, hard chrome-plated, polished, hard chrome-plated and polished, clear anodized
    - Heat treatment: carburized, quenched
    - ISO tolerances mounting side: m6, n6, p6, g6, h6, h7
    - Head diameter: 1 to 30 mm
    - Basic form: wide head, narrow head, cylindrical, with collar, with hole, with flange, double guide
    - Assembly side form: fit, external thread, internal thread, circumferential groove, notch, flat surface
    - Head shape: round, diamond-shaped (sword shape), triangular
    - Tip shape: fastened, rounded, conical, round, spherical, flattened, ball attachment, projectile-shaped

     

    Description/Basics

    centering pins are used to fix the position and limit the degrees of freedom of the objects to be positioned. The precisely manufactured centering pins enable highly precise positioning of the assembly parts. centering pins can position objects as side stopper or center them by insertion. This allows positioning them in the X, Y and Z axes.

     

     centering pint as workpiece stopper

    Application example: centering pin as work piece stopper - (1) work piece, (2) threaded receiving pin

     

    A straight centering pin is only sufficient for the X and Y axis to determine the position of an assembly part. In order to additionally adjust the position in the Z axis, a centering pin with a collar can be used. This combination can reduce the variety of components, since there is no need for an additional support pin.

     

    Positioning pin with collar

    Application example for a centering pin with collar

     

    In most cases a plug-in connection uses a centering pin to protect the work piece or the application during multiple joining and positioning. The centering bushings protect the component from unwanted wear, especially if the objects to be placed are made of a soft material. Therefore, positioning bushings make an application more maintenance-friendly. Wear should always be considered when planning an application. The material and the surface coating of centering pins should be selected according to the application.

     

    Positioning bushing - receiving bushing –  centering bushing
    Application example for a centering bushing - (1) centering bushing

     

    Function

    If objects cannot be placed straight, but slightly inclined on centering pins, a round or chamfered head shape can be used. This helps ensure that the objects do not jam with the centering pins and the process runs smoothly. A round or chamfered head shape is also advisable for applications that are highly repetitive (cycles).

     

    Receiving pin with collar - threaded receiving pin - receiving pin with collar - receiving pin with thread

    Application example for an inclined infeed - (1) centering pin rounded head, (2) workpiece

     

    For the highest possible positioning accuracy centering pins should be used in pairs as much as possible. The respective distance between the centering pins also influences the position accuracy. If it is chosen large, it can improve the accuracy of the object’s positioning. If there is a large distance between the centering pins (B), one of the locating pins should have a diamond-shaped head (sword pin), since a sword pin almost prevents tilting. The use of a third centering pin in an L-shaped (triangular) arrangement may improve the positioning accuracy even further. In order to ensure that the centering pins are not interchanged, centering pins with different diameters should be selected.

     

    Sword bolts - sword pin with thread

    Application example for a sword pin - (1) sword pin (diamond-shaped), (2) centering pin (round)

     

    MISUMI offers various mounting variants for centering pins in order to keep applications maintenance-friendly. Centering pins with internal threads can be interchangeably fastened with a screw through the mounting plate from underneath. If access to the underside is difficult, a centering pin or sword pin with external thread can be used. The assembly and disassembly of the centering pins can thus be easily designed by means of the various mounting versions.

     

    Threaded locating pin - external threaded locating pin - internal threaded locating pin

    Centering pin with external thread/ centering pin with internal thread

     

    Areas of Application

    centering pins are used in work piece carriers as well as the highly accurate positioning of components in test benches. centering pins enable highly precise positioning of objects with all degrees of freedom, thanks to the versatile and highly configurable shapes. The wide variety of MISUMI centering pins offers a suitable shape for every application. Centering pins are used for thin sheets as well as for heavy and complex components. This means that centering pins can be used across almost all industries of plant engineering and mechanical engineering. In many applications, centering pins are indispensable, as they enable a highly accurate positioning of the components.

     

    Materials

    The MISUMI centering pins are available in the following materials: steel, stainless steel, aluminum, plastic . Pins made of steel and aluminum are available in both hardened and coated versions. With a high number of cycles, the use of a hardened material is recommended, as these have a higher wear resistance.

     

    Corrosion resistance

    The following salt water spray test was performed on the raw material (see table) of the centering pins and mounting pins. Corrosion resistance was determined based on the test times of 48 and 96 hours.

     

     

    EN 1.4305 equivalent

    EN 1.4301 equivalent

    EN 1.4125 equivalent

    EN 1.2510 equivalent

    Before the test

    48h

     centering pin –  centering pin - sword pin - sword pins –  centering pin - mounting pin - cylinder pin with internal thread - cylinder pin with internal thread

    96h

    An image containing food.  Automatically generated description

     centering pin –  centering pin - sword pin - sword pins –  centering pin - mounting pin - cylinder pin with internal thread - cylinder pin with internal thread

    centering pin salt water spray test (according to JIS Z2371)

     

    Shear load in comparison

    During a test procedure, the shear load of a centering pin was tested with different steels. The tested centering pin was based on JPBB8-10 and was tested for a shear load in a device (see figure). The following table lists the test results for comparison purposes.

     

    Receiving pin –  centering pin –  centering bolt
    Application example for the shear load of receiving bolts

     

    Materials

    Shear load

    Hardness

    EN 1.2510 equivalent

    65 kN

    60 ~ 63 HRC

    EN 1.4301 equivalent

    27 kN

    10 ~ 20 HRC

    EN 1.4125 equivalent

    56 kN

    50 ~ 55 HRC

    Comparison table for shear loads on receiving pins, reference values

     

    Coatings

    MISUMI locating pins are available in burnished, hard chrome-plated or anodized to protect them from corrosion. Locating pins that have to withstand many cycles can be hard chrome-plated. The hard chrome plating provides a high surface hardness and provides the locating pin with high wear resistance. The selectable polished surface also ensures good surface roughness of the cylinder pins and helps to achieve good sliding properties. Aluminum locating pins are translucent anodized to protect them from corrosion and wear.

     

    Dimensions

    Locating pin - locating pin with wide head - locating pin large head

    Locating pin with wide head

    two-stage locating pin - stepped locating pin - double locating pin

    Locating pin, two-stage

    Locating pin - locating pin with narrow head - locating pin small head

    Locating pin with narrow head

    Locating pin with collar - locating pin

    Locating pin with collar

    Locating pin - cylindrical locating pin

    Cylindrical locating pin

    Locating pin - locating pin with through-hole - locating pin with fastening hole - locating pin with countersunk

    Locating pin with fastening hole

    Locating pin with flange - locating pin

    Flanged locating pin

    Locating pin - locating pin with flange - locating pin with cone

    Conical flanged locating pin

      

      

    Instructions for Use / Installation Information - Locating Pins / Positioning Pins / Centring Pins

     

    Maintenance

    To facilitate maintenance for the centering pins, V-shaped wear grooves can be applied to the centering pin. The 0.2 mm deep grooves serve as a wear indicator of the usable surface. This makes the visual wear on the centering pin comprehensible and makes it easier to maintain the accuracy of the device. The wear grooves of the centering pins are only available with hardened and round centering pins.

     

     centering pin –  centering pin - sword pin - sword pins –  centering pin - mounting pin - cylinder pin with internal thread - cylinder pin with internal thread

    Example of a centering pin with wear groove (red)

     

    Application Examples - Locating Pins / Positioning Pins / Centring Pins

     

    Locating bolt - locating pin - locating bushing with collar

    centering pin/ centering bushing with collar - (1) centering pin, (2) centering bushing

    Locating bolt - locating pin - locating bushing

    centering pin/ centering bushing - (1) centering pin, (2) centering bushing, (3) mounting plate

    Locating bolt - locating pin –  centering pin

    Workpiece carrier with centering pin - (1) circuit board/printed circuit board, (2) centering pin

    Locating bolt - locating pin –  centering pin - mounting pin

    Workpiece carrier with centering pin and positioning pin - (1) centering pin, (2) positioning pin

    Positioning pin with cone - locating bolt with cone - locating pin with cone –  centering bolt two-stage locating pin two-stage - locating bolt two-stage

    Two-stage centering pin with cone - (1) centering pin, (2) workpieces

    Positioning pin with cone - locating bolt with cone - locating pin with cone –  centering bolt two-stage locating pin two-stage - locating bolt two-stage

    Two-stage centering pin with cone and internal thread - (1) centering pin, (2) workpiece

       

       

    Supplementary Article

     

    Positioning pin/spacer bolt

    Locating pin - DIN 6321 - DIN6321 - support pins - receiving pins

     

    Centering pins for fixtures

     centering pin - locating pin - locating bolt - receiving pin - receiving bolt

     

    Centering bushings/test bushings

    Locating bushings - receiving bushings

     

    Clamping technology

    Quick clamps - tension lever

     

    Push-Down Clamp

    Spannvorrichtung - Haltevorrichtung - Federspanner

     

    Industrial Applications

     

    3D printer industry
    Zentrierstift - Zentrierstifte - Schwertstift - Schwertstifte - Zentrierbolzen - Aufnahmebolzen - Zylinderstifte mit Innengewinde - Zylinderstift mit Innengewinde
    Automotive industry
    Zentrierstift - Zentrierstifte - Schwertstift - Schwertstifte - Zentrierbolzen - Aufnahmebolzen - Zylinderstifte mit Innengewinde - Zylinderstift mit Innengewinde
    Pharmaindustrie
    Zentrierstift - Zentrierstifte - Schwertstift - Schwertstifte - Zentrierbolzen - Aufnahmebolzen - Zylinderstifte mit Innengewinde - Zylinderstift mit Innengewinde
    Packaging industry
    Zentrierstift - Zentrierstifte - Schwertstift - Schwertstifte - Zentrierbolzen - Aufnahmebolzen - Zylinderstifte mit Innengewinde - Zylinderstift mit Innengewinde