Blocks / PUR, NBR, CR, SI, PFM, / ether, ester / A32, A50, A65, A70, A80, A90, A95 / through holes, counterbores (Part Numbers - CAD Download)

View the FAQ (5)

MISUMI

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information
Catalog
Technical Information

Back to the Category Panels (polyurethane rubber, rubber, foam, felt)

Technical Drawing - Panels (polyurethane rubber, rubber, foam, felt)

Open the technical drawing in the new window

Available dimensions and tolerances can be found under the tab More information.

Basic Properties (e.g., material, hardness, coating, tolerance) - Panels (polyurethane rubber, rubber, foam, felt)

Type	Material	Tolerance
BUTSN	Ether Polyurethane	T Dimension Tolerance	6 ~ 9 10 or More ±0.3 ±0.5
BUTHN
BUTM	Ester Polyurethane	A, B Dimension Tolerance	30mm or Less 31 ~ 50 51 or More ±0.5 ±0.7 ±0.8
BUTL
BRBNM	Nitrile Rubber	T Dimension Tolerance	6 ~ 9 10 or More ±0.5 ±0.8
BRBCM	Chloroprene Rubber
BRBFM	Fluororubber
BRBSM	Silicon Rubber	A, B Dimension Tolerance	30mm or Less 31 ~ 50 51 or More ±0.8 ±1.0 ±1.5
BRBAM	Silicon Rubber
BUNSE	Low Elasticity Rubber

Type	Material	Hardness	Color
BUTSN	Ether Polyurethane	Shore A95	Natural Color
BUTHN	Ether Polyurethane	Shore A90	Natural Color
BUTM	Ester Polyurethane	Shore A70	Natural Color
BUTL	Ester Polyurethane	Shore A50	Natural Color
BRBNM	Nitrile Rubber	Shore A70	Black
BRBCM	Chloroprene Rubber	Shore A65	Black
BRBFM	Fluororubber	Shore A80	Black
BRBSM	Silicon Rubber	Shore A70	Light Gray
BRBAM	Silicon Rubber	Shore A50	Milky White
BUNSE	Low Elasticity Rubber	Shore A32	Black

Further specifications can be found under the tab More information.

Composition of a Product Code - Panels (polyurethane rubber, rubber, foam, felt)

Part Number	-	A	-	B	-	T	-	F	-	Screw Nominal Dia. Selection
BUTSN BUNSE	- -	A100 A150	- -	B100 B50	- -	T21 T7	- -	F53 F0	- -	N12 N0

Alterations - Panels (polyurethane rubber, rubber, foam, felt)

General Information - Panels (polyurethane rubber, rubber, foam, felt)

Selection details of panels (polyurethane rubber, rubber, foam, felt)

- Material: polyurethane rubber (PU/PUR), heat-resistant polyurethane rubber, low-impact polyurethane rubber, abrasion-resistant polyurethane rubber, antistatic polyurethane, nitrile (NBR), chloroprene rubber (CR), polyethylene (EPDM), silicone (SI), fluorine (FPM), butyl rubber (IIR), natural rubber (NR), hard rubber, special synthetic rubber, polyurethane foam, head-insulating foam, polyethylene foam, low-rebound foam

- Thickness (mm): 0.5 to 50

- Width (mm): 3 to 500

- Length (mm): 10 to 2000

Description/Basics

Foam plates and rubber plates are provided for damping or for sound proofing. MISUMI offers these in various Shore hardening for a wide variety of tasks. Due to the variety of materials, different resistances to environmental influences are possible depending on the application. The foam plates reduce sound in machines and can reduce the sound emissions of a system. For more information on foam characteristics, follow this link.
Rubber plates or foam plates are also suitable in conveyor systems to absorb components to be transported at a dampened level or to protect them from damage as a lateral guide when the components bump into each other. Hard rubber panels or low-impact rubber or foam panels reduce the impact energy of the components. These minimize and lower the vibrations in an application.
In addition, MISUMI offers highly abrasion-resistant polyurethane (Vulkollan), which has an abrasion resistance that is six times higher than with conventional polyurethane.
Ceramic polyurethane plates contain ceramic particles. After machining, these can have a smooth surface despite low Shore hardness.
The polyurethane rubber plates are also available antistatically. The specific resistance of antistatic polyurethane plates prevents static charging. This prevents any damage to electronic components.
For applications with higher temperatures, MISUMI offers heat-resistant polyurethane rubber, which can withstand a temperature range of up to approx. ~120°C (see the product specifications for exact information).
MISUMI also offers low-friction and anti-friction rubber plates. Low-friction rubber plates are often used in the gentle component guide for belt conveyors and roller conveyors.
Felt plates have the property of absorbing or dispensing oil and other liquids via the capillary effect. This property can be used to remove, for example, excess oil on a belt conveyor.

In addition, MISUMI offers rubber plates and foam plates that are self-adhesive for simplified assembly. Furthermore, you will find double-adhesive tape for attaching rubber plates and foam plates.

Additional properties on foam panels and rubber plates can be found in the Properties PDF.

MISUMI also offers these products in a round shape as discs and sleeves made of rubber, natural rubber, foam and felt.

Application Examples - Panels (polyurethane rubber, rubber, foam, felt)

Application example
(1) Low-friction rubber plate (2) belt conveyor

Application example
(1) Vibration damping plate

Industrial Applications

3D printer industry

Automotive industry

Pharmaceutical industry

Packaging industry

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
BRBAM-A[25-150/1]-B[25-100/1]-T[6-30/1]-F0-N[0,3,4,5,6,8,10,12]
BRBAM-A[25-150/1]-B[25-100/1]-T[6-30/1]-F0-Z[3,4,5,6,8,10,12]
BRBAM-A[25-150/1]-B[25-100/1]-T[6-30/1]-F[9-141/1]-N[0,3,4,5,6,8,10,12]
BRBAM-A[25-150/1]-B[25-100/1]-T[6-30/1]-F[9-141/1]-Z[3,4,5,6,8,10,12]
BRBCM-A[25-150/1]-B[25-100/1]-T[6-30/1]-F0-N[0,3,4,5,6,8,10,12]
BRBCM-A[25-150/1]-B[25-100/1]-T[6-30/1]-F0-Z[3,4,5,6,8,10,12]
BRBCM-A[25-150/1]-B[25-100/1]-T[6-30/1]-F[9-141/1]-N[0,3,4,5,6,8,10,12]
BRBCM-A[25-150/1]-B[25-100/1]-T[6-30/1]-F[9-141/1]-Z[3,4,5,6,8,10,12]
BRBFM-A[25-150/1]-B[25-100/1]-T[6-30/1]-F0-N[0,3,4,5,6,8,10,12]
BRBFM-A[25-150/1]-B[25-100/1]-T[6-30/1]-F0-Z[3,4,5,6,8,10,12]
BRBFM-A[25-150/1]-B[25-100/1]-T[6-30/1]-F[9-141/1]-N[0,3,4,5,6,8,10,12]
BRBFM-A[25-150/1]-B[25-100/1]-T[6-30/1]-F[9-141/1]-Z[3,4,5,6,8,10,12]
BRBNM-A[25-150/1]-B[25-100/1]-T[6-30/1]-F0-N[0,3,4,5,6,8,10,12]
BRBNM-A[25-150/1]-B[25-100/1]-T[6-30/1]-F0-Z[3,4,5,6,8,10,12]
BRBNM-A[25-150/1]-B[25-100/1]-T[6-30/1]-F[9-141/1]-N[0,3,4,5,6,8,10,12]
BRBNM-A[25-150/1]-B[25-100/1]-T[6-30/1]-F[9-141/1]-Z[3,4,5,6,8,10,12]
BRBSM-A[25-150/1]-B[25-100/1]-T[6-30/1]-F0-N[0,3,4,5,6,8,10,12]
BRBSM-A[25-150/1]-B[25-100/1]-T[6-30/1]-F0-Z[3,4,5,6,8,10,12]
BRBSM-A[25-150/1]-B[25-100/1]-T[6-30/1]-F[9-141/1]-N[0,3,4,5,6,8,10,12]
BRBSM-A[25-150/1]-B[25-100/1]-T[6-30/1]-F[9-141/1]-Z[3,4,5,6,8,10,12]
BUNSE-A[25-150/1]-B[25-100/1]-T[6-30/1]-F0-N[0,3,4,5,6,8,10,12]
BUNSE-A[25-150/1]-B[25-100/1]-T[6-30/1]-F0-Z[3,4,5,6,8,10,12]
BUNSE-A[25-150/1]-B[25-100/1]-T[6-30/1]-F[9-141/1]-N[0,3,4,5,6,8,10,12]
BUNSE-A[25-150/1]-B[25-100/1]-T[6-30/1]-F[9-141/1]-Z[3,4,5,6,8,10,12]
BUTHN-A[25-150/1]-B[25-100/1]-T[6-30/1]-F0-N[0,3,4,5,6,8,10,12]
BUTHN-A[25-150/1]-B[25-100/1]-T[6-30/1]-F0-Z[3,4,5,6,8,10,12]
BUTHN-A[25-150/1]-B[25-100/1]-T[6-30/1]-F[9-141/1]-N[0,3,4,5,6,8,10,12]
BUTHN-A[25-150/1]-B[25-100/1]-T[6-30/1]-F[9-141/1]-Z[3,4,5,6,8,10,12]
BUTL-A[25-150/1]-B[25-100/1]-T[6-30/1]-F0-N[0,3,4,5,6,8,10,12]
BUTL-A[25-150/1]-B[25-100/1]-T[6-30/1]-F0-Z[3,4,5,6,8,10,12]
BUTL-A[25-150/1]-B[25-100/1]-T[6-30/1]-F[9-141/1]-N[0,3,4,5,6,8,10,12]
BUTL-A[25-150/1]-B[25-100/1]-T[6-30/1]-F[9-141/1]-Z[3,4,5,6,8,10,12]
BUTM-A[25-150/1]-B[25-100/1]-T[6-30/1]-F0-N[0,3,4,5,6,8,10,12]
BUTM-A[25-150/1]-B[25-100/1]-T[6-30/1]-F0-Z[3,4,5,6,8,10,12]
BUTM-A[25-150/1]-B[25-100/1]-T[6-30/1]-F[9-141/1]-N[0,3,4,5,6,8,10,12]
BUTM-A[25-150/1]-B[25-100/1]-T[6-30/1]-F[9-141/1]-Z[3,4,5,6,8,10,12]
BUTSN-A[25-150/1]-B[25-100/1]-T[6-30/1]-F0-N[0,3,4,5,6,8,10,12]
BUTSN-A[25-150/1]-B[25-100/1]-T[6-30/1]-F0-Z[3,4,5,6,8,10,12]
BUTSN-A[25-150/1]-B[25-100/1]-T[6-30/1]-F[9-141/1]-N[0,3,4,5,6,8,10,12]
BUTSN-A[25-150/1]-B[25-100/1]-T[6-30/1]-F[9-141/1]-Z[3,4,5,6,8,10,12]

Minimum order quantity	Standard Shipping Days ?	RoHS	Material	Grade, Type	Thickness T (mm)	Width A (mm)	Length B (mm)	Hardness (Shore, Asker, Penetration)	Counterbored Hole Nominal Dia. [Z]	F (mm)	Through Hole Nominal Dia. [N]
1	7 Days	10	Rubber	[Silicon (SI)] Silicon (SI)	6 ～ 30	25 ～ 150	25 ～ 100	Shore A50	-	0	0 ～ 12
1	7 Days	10	Rubber	[Silicon (SI)] Silicon (SI)	6 ～ 30	25 ～ 150	25 ～ 100	Shore A50	3 ～ 12	0	-
1	7 Days	10	Rubber	[Silicon (SI)] Silicon (SI)	6 ～ 30	25 ～ 150	25 ～ 100	Shore A50	-	9 ～ 141	0 ～ 12
1	7 Days	10	Rubber	[Silicon (SI)] Silicon (SI)	6 ～ 30	25 ～ 150	25 ～ 100	Shore A50	3 ～ 12	9 ～ 141	-
1	7 Days	10	Rubber	[Chloroprene (CR)] Chloroprene (CR)	6 ～ 30	25 ～ 150	25 ～ 100	Shore A65	-	0	0 ～ 12
1	7 Days	10	Rubber	[Chloroprene (CR)] Chloroprene (CR)	6 ～ 30	25 ～ 150	25 ～ 100	Shore A65	3 ～ 12	0	-
1	7 Days	10	Rubber	[Chloroprene (CR)] Chloroprene (CR)	6 ～ 30	25 ～ 150	25 ～ 100	Shore A65	-	9 ～ 141	0 ～ 12
1	7 Days	10	Rubber	[Chloroprene (CR)] Chloroprene (CR)	6 ～ 30	25 ～ 150	25 ～ 100	Shore A65	3 ～ 12	9 ～ 141	-
1	7 Days	10	Rubber	[Fluorine (FPM)] Fluorine (FPM)	6 ～ 30	25 ～ 150	25 ～ 100	Shore A80	-	0	0 ～ 12
1	7 Days	10	Rubber	[Fluorine (FPM)] Fluorine (FPM)	6 ～ 30	25 ～ 150	25 ～ 100	Shore A80	3 ～ 12	0	-
1	7 Days	10	Rubber	[Fluorine (FPM)] Fluorine (FPM)	6 ～ 30	25 ～ 150	25 ～ 100	Shore A80	-	9 ～ 141	0 ～ 12
1	7 Days	10	Rubber	[Fluorine (FPM)] Fluorine (FPM)	6 ～ 30	25 ～ 150	25 ～ 100	Shore A80	3 ～ 12	9 ～ 141	-
1	7 Days	10	Rubber	[Nitrile (NBR)] Nitrile (NBR)	6 ～ 30	25 ～ 150	25 ～ 100	Shore A70	-	0	0 ～ 12
1	7 Days	10	Rubber	[Nitrile (NBR)] Nitrile (NBR)	6 ～ 30	25 ～ 150	25 ～ 100	Shore A70	3 ～ 12	0	-
1	7 Days	10	Rubber	[Nitrile (NBR)] Nitrile (NBR)	6 ～ 30	25 ～ 150	25 ～ 100	Shore A70	-	9 ～ 141	0 ～ 12
1	7 Days	10	Rubber	[Nitrile (NBR)] Nitrile (NBR)	6 ～ 30	25 ～ 150	25 ～ 100	Shore A70	3 ～ 12	9 ～ 141	-
1	7 Days	10	Rubber	[Silicon (SI)] Silicon (SI)	6 ～ 30	25 ～ 150	25 ～ 100	Shore A70	-	0	0 ～ 12
1	7 Days	10	Rubber	[Silicon (SI)] Silicon (SI)	6 ～ 30	25 ～ 150	25 ～ 100	Shore A70	3 ～ 12	0	-
1	7 Days	10	Rubber	[Silicon (SI)] Silicon (SI)	6 ～ 30	25 ～ 150	25 ～ 100	Shore A70	-	9 ～ 141	0 ～ 12
1	7 Days	10	Rubber	[Silicon (SI)] Silicon (SI)	6 ～ 30	25 ～ 150	25 ～ 100	Shore A70	3 ～ 12	9 ～ 141	-
1	7 Days	10	Rubber	[Low Elasticity Rubber] Low Elasticity Rubber	6 ～ 30	25 ～ 150	25 ～ 100	Shore A32	-	0	0 ～ 12
1	7 Days	10	Rubber	[Low Elasticity Rubber] Low Elasticity Rubber	6 ～ 30	25 ～ 150	25 ～ 100	Shore A32	3 ～ 12	0	-
1	7 Days	10	Rubber	[Low Elasticity Rubber] Low Elasticity Rubber	6 ～ 30	25 ～ 150	25 ～ 100	Shore A32	-	9 ～ 141	0 ～ 12
1	7 Days	10	Rubber	[Low Elasticity Rubber] Low Elasticity Rubber	6 ～ 30	25 ～ 150	25 ～ 100	Shore A32	3 ～ 12	9 ～ 141	-
1	7 Days	10	Urethane	[Standard Urethane] Ether Polyurethane	6 ～ 30	25 ～ 150	25 ～ 100	Shore A90	-	0	0 ～ 12
1	7 Days	10	Urethane	[Standard Urethane] Ether Polyurethane	6 ～ 30	25 ～ 150	25 ～ 100	Shore A90	3 ～ 12	0	-
1	7 Days	10	Urethane	[Standard Urethane] Ether Polyurethane	6 ～ 30	25 ～ 150	25 ～ 100	Shore A90	-	9 ～ 141	0 ～ 12
1	7 Days	10	Urethane	[Standard Urethane] Ether Polyurethane	6 ～ 30	25 ～ 150	25 ～ 100	Shore A90	3 ～ 12	9 ～ 141	-
1	7 Days	10	Urethane	[Standard Urethane] Ester Polyurethane	6 ～ 30	25 ～ 150	25 ～ 100	Shore A50	-	0	0 ～ 12
1	7 Days	10	Urethane	[Standard Urethane] Ester Polyurethane	6 ～ 30	25 ～ 150	25 ～ 100	Shore A50	3 ～ 12	0	-
1	7 Days	10	Urethane	[Standard Urethane] Ester Polyurethane	6 ～ 30	25 ～ 150	25 ～ 100	Shore A50	-	9 ～ 141	0 ～ 12
1	7 Days	10	Urethane	[Standard Urethane] Ester Polyurethane	6 ～ 30	25 ～ 150	25 ～ 100	Shore A50	3 ～ 12	9 ～ 141	-
1	7 Days	10	Urethane	[Standard Urethane] Ester Polyurethane	6 ～ 30	25 ～ 150	25 ～ 100	Shore A70	-	0	0 ～ 12
1	7 Days	10	Urethane	[Standard Urethane] Ester Polyurethane	6 ～ 30	25 ～ 150	25 ～ 100	Shore A70	3 ～ 12	0	-
1	7 Days	10	Urethane	[Standard Urethane] Ester Polyurethane	6 ～ 30	25 ～ 150	25 ～ 100	Shore A70	-	9 ～ 141	0 ～ 12
1	7 Days	10	Urethane	[Standard Urethane] Ester Polyurethane	6 ～ 30	25 ～ 150	25 ～ 100	Shore A70	3 ～ 12	9 ～ 141	-
1	7 Days	10	Urethane	[Standard Urethane] Ether Polyurethane	6 ～ 30	25 ～ 150	25 ～ 100	Shore A95	-	0	0 ～ 12
1	7 Days	10	Urethane	[Standard Urethane] Ether Polyurethane	6 ～ 30	25 ～ 150	25 ～ 100	Shore A95	3 ～ 12	0	-
1	7 Days	10	Urethane	[Standard Urethane] Ether Polyurethane	6 ～ 30	25 ～ 150	25 ～ 100	Shore A95	-	9 ～ 141	0 ～ 12
1	7 Days	10	Urethane	[Standard Urethane] Ether Polyurethane	6 ～ 30	25 ～ 150	25 ～ 100	Shore A95	3 ～ 12	9 ～ 141	-

Back to the Category Panels (polyurethane rubber, rubber, foam, felt)

Technical Drawing - Panels (polyurethane rubber, rubber, foam, felt)

Open the technical drawing in the new window

Specification Tables - Panels (polyurethane rubber, rubber, foam, felt)

Part Number	1mm Increment				Screw Nominal Dia. Selection
Type	A	B	T	F	N (Through Hole), Z (Counterbored Hole)
BUTSN (Urethane A95)	25~150	25~100	6~30	9~141 (N=0 >>) F=0	0 3 4 5 6 8 10 12
BUTHN (Urethane A90)					(When B<30)
BUTM (Urethane A70)
BUTL (Urethane A50)					0 5 6 8 10 12
BRBNM (Nitrile Rubber)					(When 30≤B<50)
BRBCM (Chloroprene Rubber)
BRBFM (Fluororubber)					0 10 12
BRBSM (Silicon Rubber A70)					(When 50≤B)
BRBAM (Silicon Rubber A50)					(For No Hole) N=0
BUNSE (Low Elasticity Rubber)					(For No Hole) N=0

5≤T-d(d₁)
d(d₁)+5≤F≤A-d(d₁)-5

Alterations - Panels (polyurethane rubber, rubber, foam, felt)

Products homepage

Basic information

With or w/o Adhesive	No Adhesive	Hole Machining	With Hole Machining

Configure

40Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Material
- Urethane
- Rubber
Clear
Grade, Type
- Standard Urethane
  - Ester Polyurethane
  - Ether Polyurethane
- Nitrile (NBR)
  - Nitrile (NBR)
- Chloroprene (CR)
  - Chloroprene (CR)
- Silicon (SI)
  - Silicon (SI)
- Fluorine (FPM)
  - Fluorine (FPM)
- Low Elasticity Rubber
  - Low Elasticity Rubber
Clear
Thickness T(mm)
[6-30/1mm Unit(s)]
Clear
Width A(mm)
[25-150/1mm Unit(s)]
Clear
Length B(mm)
[25-100/1mm Unit(s)]
Clear
Hardness (Shore, Asker, Penetration)
Shore A32

Shore A50

Shore A65

Shore A70

Shore A80

Shore A90

Shore A95
Clear
Counterbored Hole Nominal Dia. [Z]
3

4

5

6

8

10

12
Clear
F(mm)
0
[9-141/1mm Unit(s)]
Clear
Through Hole Nominal Dia. [N]
0

3

4

5

6

8

10

12
Clear
Type
- BRBAM
- BRBCM
- BRBFM
- BRBNM
- BRBSM
- BUNSE
- BUTHN
- BUTL
- BUTM
- BUTSN
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently Asked Questions (FAQ)

Question:
How can you attach a rubber plate?: Answer:
A rubber plate can be attached with double-adhesive tape. MISUMI offers rubber plates with configurable through holes or counterbores with adhesive tape.
Question:
Do you have screw-on rubber panels?: Answer:
MISUMI offers rubber plates that can be screwed on via a through hole or counterbore. The rubber plates with counterbores are well suited for applications that need to form a flat surface.
Question:
Is NBR oil-resistant?: Answer:
The NBR rubber is oil-resistant and is often used as a sealing material for rubber or foam. In addition, NBR has good thermal resistance, which in combination with high abrasion resistance is the best suited NBR material for seals.
Question:
Which material reduces vibrations well?: Answer:
Silicone gel vibration dampers reduce vibrations well. This elastic material reduces the transmission of vibrations to the subsequent component and also contributes to the acoustics.
Question:
What is Vulkollan?: Answer:
Vulkollan is a highly abrasion-resistant polyurethane rubber that has high wear resistance. It is one of the high-performance rubbers that has little pressure deformation and can withstand high impact forces. In addition, Vulkollan has a high tear strength. However, over time Vulkollan may change its colour, but without losing its mechanical properties.