Warunki filtrowania
- Tip diameter tolerance (Reference tolerance)
- Head thickness
- D (Shaft diameter)(mm)
- 2.5
- P (Tip diameter)(mm)[0.8–2.4/0.01mm jedn.]
- Character engraving type
- Number of engraving characters
- L (L dimension)(mm)[40–250/0.01mm jedn.]
- N(mm)[15–235/1mm jedn.]
- Engraving character designation
- Type
- CAD
- 2D
- 3D
Dodatkowa opcje
- Flat cutting position change [AKC](°)[1–359/1° jedn.]
- Parallel two flats cutting (angled) [AWC](°)[0–359/1° jedn.]
- Varied width parallel flats cutting [KAC](mm)[1.25–2.35/0.05mm jedn.]
- Varied width parallel flats cutting [KBC](mm)[1.25–2.3/0.1mm jedn.]
- Right angled two flats cutting (angled) [ARC](°)[1–359/1° jedn.]
- Three flats (angled) cutting [ADC](°)[1–359/1° jedn.]
- Two flats (angled) cutting [KGA](°)[1–359/1° jedn.]
- Two flats (angled) cutting [KGB](°)[1–359/1° jedn.]
- Head thickness change [TC](mm)[2–3.9/0.1mm jedn.]
- Head diameter change [HC](mm)[3.5–4.9/0.1mm jedn.]
- Head diameter change (Precision) [HCC](mm)[3.5–4.6/0.1mm jedn.]
- Engraving depth alteration
Ejector pins / head flattened on one side / EN 1.3343 Equiv. / stepped / convex engraved face / tip diameter, length Configurable (EHSFE1MR2.5-[40-250/0.01]-P[0.8-2.4/0.01]-N[15-235/1]-*)
Rysunek konturowy
