• Marki
  • Firma
  • Kontakt
PL
Type Code Seach | *NOT READY*
#CODE
Sugestie słów kluczowych
Sugestie numerów części
Discontinued Products

Ejector pins / head flattened on one side / EN 1.3343 Equiv. / stepped / convex engraved face / tip diameter, length Configurable

Ejector pins / head flattened on one side / EN 1.3343 Equiv. / stepped / convex engraved face / tip diameter, length Configurable

Click on this image to zoom in.

Click on this image to zoom in.

MISUMI

MISUMI

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
  2. 2
  3. 3
  4. Next >>
Part Number
EHSF1MR1-[40-150/0.01]-P[0.3-0.9/0.01]-N[15-135/1]-[0-9/1]
EHSF1MR1-[40-150/0.01]-P[0.3-0.9/0.01]-N[15-135/1]-*
EHSF1MR1.5-[40-200/0.01]-P[0.6-1.4/0.01]-N[15-185/1]-[0-9/1]
EHSF1MR1.5-[40-200/0.01]-P[0.6-1.4/0.01]-N[15-185/1]-*
EHSF1MR2-[40-250/0.01]-P[0.8-1.9/0.01]-N[15-235/1]-[0-9/1]
EHSF1MR2-[40-250/0.01]-P[0.8-1.9/0.01]-N[15-235/1]-*
EHSF1MR2.5-[40-250/0.01]-P[0.8-2.4/0.01]-N[15-235/1]-[0-9/1]
EHSF1MR2.5-[40-250/0.01]-P[0.8-2.4/0.01]-N[15-235/1]-*
EHSF1MR3-[40-250/0.01]-P[1-2.9/0.01]-N[15-230/1]-[0-9/1]
EHSF1MR3-[40-250/0.01]-P[1-2.9/0.01]-N[15-230/1]-*
EHSF1MR3.5-[40-250/0.01]-P[1.5-3.4/0.01]-N[15-230/1]-[0-9/1]
EHSF1MR3.5-[40-250/0.01]-P[1.5-3.4/0.01]-N[15-230/1]-*
EHSF1MR4-[40-250/0.01]-P[1.5-3.9/0.01]-N[15-230/1]-[0-9/1]
EHSF1MR4-[40-250/0.01]-P[1.5-3.9/0.01]-N[15-230/1]-*
EHSF1MR4.5-[40-250/0.01]-P[2.5-4.4/0.01]-N[15-230/1]-[0-9/1]
EHSF1MR4.5-[40-250/0.01]-P[2.5-4.4/0.01]-N[15-230/1]-*
EHSF1MR5-[40-250/0.01]-P[3-4.9/0.01]-N[15-230/1]-[0-9/1]
EHSF1MR5-[40-250/0.01]-P[3-4.9/0.01]-N[15-230/1]-*
EHSF1MR5.5-[40-250/0.01]-P[3.5-5.4/0.01]-N[15-230/1]-[0-9/1]
EHSF1MR5.5-[40-250/0.01]-P[3.5-5.4/0.01]-N[15-230/1]-*
EHSF1MR6-[40-250/0.01]-P[4-5.9/0.01]-N[15-230/1]-[0-9/1]
EHSF1MR6-[40-250/0.01]-P[4-5.9/0.01]-N[15-230/1]-*
EHSF1MR6.5-[40-250/0.01]-P[4.5-6.4/0.01]-N[15-230/1]-[0-9/1]
EHSF1MR6.5-[40-250/0.01]-P[4.5-6.4/0.01]-N[15-230/1]-*
EHSF1MR7-[40-250/0.01]-P[4.9-6.9/0.01]-N[15-230/1]-[0-9/1]
EHSF1MR7-[40-250/0.01]-P[4.9-6.9/0.01]-N[15-230/1]-*
EHSF1MR8-[40-250/0.01]-P[5.9-7.9/0.01]-N[15-230/1]-[0-9/1]
EHSF1MR8-[40-250/0.01]-P[5.9-7.9/0.01]-N[15-230/1]-*
EHSF1MR9-[40-250/0.01]-P[6.9-8.9/0.01]-N[15-230/1]-[0-9/1]
EHSF1MR9-[40-250/0.01]-P[6.9-8.9/0.01]-N[15-230/1]-*
EHSF1MR10-[40-250/0.01]-P[7.9-9.9/0.01]-N[15-230/1]-[0-9/1]
EHSF1MR10-[40-250/0.01]-P[7.9-9.9/0.01]-N[15-230/1]-*
EHSF1MR12-[40-250/0.01]-P[8.9-11.9/0.01]-N[15-230/1]-[0-9/1]
EHSF1MR12-[40-250/0.01]-P[8.9-11.9/0.01]-N[15-230/1]-*
EHSF2MR2-[40-250/0.01]-P[1.5-1.9/0.01]-N[15-235/1]-**
EHSF2MR2.5-[40-250/0.01]-P[1.5-2.4/0.01]-N[15-235/1]-**
EHSF2MR3-[40-250/0.01]-P[1.5-2.9/0.01]-N[15-230/1]-**
EHSF2MR3.5-[40-250/0.01]-P[1.5-3.4/0.01]-N[15-230/1]-**
EHSF2MR4-[40-250/0.01]-P[1.5-3.9/0.01]-N[15-230/1]-**
EHSF2MR4.5-[40-250/0.01]-P[2.5-4.4/0.01]-N[15-230/1]-**
EHSF2MR5-[40-250/0.01]-P[3-4.9/0.01]-N[15-230/1]-**
EHSF2MR5.5-[40-250/0.01]-P[3.5-5.4/0.01]-N[15-230/1]-**
EHSF2MR6-[40-250/0.01]-P[4-5.9/0.01]-N[15-230/1]-**
EHSF2MR6.5-[40-250/0.01]-P[4.5-6.4/0.01]-N[15-230/1]-**
EHSF2MR7-[40-250/0.01]-P[4.9-6.9/0.01]-N[15-230/1]-**
EHSF2MR8-[40-250/0.01]-P[5.9-7.9/0.01]-N[15-230/1]-**
EHSF2MR9-[40-250/0.01]-P[6.9-8.9/0.01]-N[15-230/1]-**
EHSF2MR10-[40-250/0.01]-P[7.9-9.9/0.01]-N[15-230/1]-**
EHSF2MR12-[40-250/0.01]-P[8.9-11.9/0.01]-N[15-230/1]-**
EHSFE1MR1-[40-150/0.01]-P[0.3-0.9/0.01]-N[15-135/1]-[0-9/1]
EHSFE1MR1-[40-150/0.01]-P[0.3-0.9/0.01]-N[15-135/1]-*
EHSFE1MR1.5-[40-200/0.01]-P[0.6-1.4/0.01]-N[15-185/1]-[0-9/1]
EHSFE1MR1.5-[40-200/0.01]-P[0.6-1.4/0.01]-N[15-185/1]-*
EHSFE1MR2-[40-250/0.01]-P[0.8-1.9/0.01]-N[15-235/1]-[0-9/1]
EHSFE1MR2-[40-250/0.01]-P[0.8-1.9/0.01]-N[15-235/1]-*
EHSFE1MR2.5-[40-250/0.01]-P[0.8-2.4/0.01]-N[15-235/1]-[0-9/1]
EHSFE1MR2.5-[40-250/0.01]-P[0.8-2.4/0.01]-N[15-235/1]-*
EHSFE1MR3-[40-250/0.01]-P[1-2.9/0.01]-N[15-230/1]-[0-9/1]
EHSFE1MR3-[40-250/0.01]-P[1-2.9/0.01]-N[15-230/1]-*
EHSFE1MR3.5-[40-250/0.01]-P[1.5-3.4/0.01]-N[15-230/1]-[0-9/1]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSTip diameter tolerance (Reference tolerance) Head thickness D (Shaft diameter)
(mm) 		P (Tip diameter)
(mm) 		Character engraving type Number of engraving characters L (L dimension)
(mm) 		N
(mm) 		# Characters for engraving
(Number designation) 		Engraving character designation Engraving character selection

-

1 Quote 100/-0.0054mm(T4)10.3 ～ 0.9Concave character (Sequential numbering)1 characters40 ～ 15015 ～ 135-0 ～ 9--

-

1 Quote 100/-0.0054mm(T4)10.3 ～ 0.9Concave character (Sequential numbering)1 characters40 ～ 15015 ～ 135--※Designation by WOS-

-

1 Quote 100/-0.0054mm(T4)1.50.6 ～ 1.4Concave character (Sequential numbering)1 characters40 ～ 20015 ～ 185-0 ～ 9--

-

1 Quote 100/-0.0054mm(T4)1.50.6 ～ 1.4Concave character (Sequential numbering)1 characters40 ～ 20015 ～ 185--※Designation by WOS-

-

1 Quote 100/-0.0054mm(T4)20.8 ～ 1.9Concave character (Sequential numbering)1 characters40 ～ 25015 ～ 235-0 ～ 9--

-

1 Quote 100/-0.0054mm(T4)20.8 ～ 1.9Concave character (Sequential numbering)1 characters40 ～ 25015 ～ 235--※Designation by WOS-

-

1 Quote 100/-0.0054mm(T4)2.50.8 ～ 2.4Concave character (Sequential numbering)1 characters40 ～ 25015 ～ 235-0 ～ 9--

-

1 Quote 100/-0.0054mm(T4)2.50.8 ～ 2.4Concave character (Sequential numbering)1 characters40 ～ 25015 ～ 235--※Designation by WOS-

-

1 Quote 100/-0.0054mm(T4)31 ～ 2.9Concave character (Sequential numbering)1 characters40 ～ 25015 ～ 230-0 ～ 9--

-

1 Quote 100/-0.0054mm(T4)31 ～ 2.9Concave character (Sequential numbering)1 characters40 ～ 25015 ～ 230--※Designation by WOS-

-

1 Quote 100/-0.0054mm(T4)3.51.5 ～ 3.4Concave character (Sequential numbering)1 characters40 ～ 25015 ～ 230-0 ～ 9--

-

1 Quote 100/-0.0054mm(T4)3.51.5 ～ 3.4Concave character (Sequential numbering)1 characters40 ～ 25015 ～ 230--※Designation by WOS-

-

1 Quote 100/-0.0054mm(T4)41.5 ～ 3.9Concave character (Sequential numbering)1 characters40 ～ 25015 ～ 230-0 ～ 9--

-

1 Quote 100/-0.0054mm(T4)41.5 ～ 3.9Concave character (Sequential numbering)1 characters40 ～ 25015 ～ 230--※Designation by WOS-

-

1 Quote 100/-0.0054mm(T4)4.52.5 ～ 4.4Concave character (Sequential numbering)1 characters40 ～ 25015 ～ 230-0 ～ 9--

-

1 Quote 100/-0.0054mm(T4)4.52.5 ～ 4.4Concave character (Sequential numbering)1 characters40 ～ 25015 ～ 230--※Designation by WOS-

-

1 Quote 100/-0.0054mm(T4)53 ～ 4.9Concave character (Sequential numbering)1 characters40 ～ 25015 ～ 230-0 ～ 9--

-

1 Quote 100/-0.0054mm(T4)53 ～ 4.9Concave character (Sequential numbering)1 characters40 ～ 25015 ～ 230--※Designation by WOS-

-

1 Quote 100/-0.0054mm(T4)5.53.5 ～ 5.4Concave character (Sequential numbering)1 characters40 ～ 25015 ～ 230-0 ～ 9--

-

1 Quote 100/-0.0054mm(T4)5.53.5 ～ 5.4Concave character (Sequential numbering)1 characters40 ～ 25015 ～ 230--※Designation by WOS-

-

1 Quote 100/-0.0054mm(T4)64 ～ 5.9Concave character (Sequential numbering)1 characters40 ～ 25015 ～ 230-0 ～ 9--

-

1 Quote 100/-0.0054mm(T4)64 ～ 5.9Concave character (Sequential numbering)1 characters40 ～ 25015 ～ 230--※Designation by WOS-

-

1 Quote 100/-0.0054mm(T4)6.54.5 ～ 6.4Concave character (Sequential numbering)1 characters40 ～ 25015 ～ 230-0 ～ 9--

-

1 Quote 100/-0.0054mm(T4)6.54.5 ～ 6.4Concave character (Sequential numbering)1 characters40 ～ 25015 ～ 230--※Designation by WOS-

-

1 Quote 100/-0.0054mm(T4)74.9 ～ 6.9Concave character (Sequential numbering)1 characters40 ～ 25015 ～ 230-0 ～ 9--

-

1 Quote 100/-0.0054mm(T4)74.9 ～ 6.9Concave character (Sequential numbering)1 characters40 ～ 25015 ～ 230--※Designation by WOS-

-

1 Quote 100/-0.0054mm(T4)85.9 ～ 7.9Concave character (Sequential numbering)1 characters40 ～ 25015 ～ 230-0 ～ 9--

-

1 Quote 100/-0.0054mm(T4)85.9 ～ 7.9Concave character (Sequential numbering)1 characters40 ～ 25015 ～ 230--※Designation by WOS-

-

1 Quote 100/-0.0054mm(T4)96.9 ～ 8.9Concave character (Sequential numbering)1 characters40 ～ 25015 ～ 230-0 ～ 9--

-

1 Quote 100/-0.0054mm(T4)96.9 ～ 8.9Concave character (Sequential numbering)1 characters40 ～ 25015 ～ 230--※Designation by WOS-

-

1 Quote 100/-0.0054mm(T4)107.9 ～ 9.9Concave character (Sequential numbering)1 characters40 ～ 25015 ～ 230-0 ～ 9--

-

1 Quote 100/-0.0054mm(T4)107.9 ～ 9.9Concave character (Sequential numbering)1 characters40 ～ 25015 ～ 230--※Designation by WOS-

-

1 Quote 100/-0.0054mm(T4)128.9 ～ 11.9Concave character (Sequential numbering)1 characters40 ～ 25015 ～ 230-0 ～ 9--

-

1 Quote 100/-0.0054mm(T4)128.9 ～ 11.9Concave character (Sequential numbering)1 characters40 ～ 25015 ～ 230--※Designation by WOS-

-

1 Quote 100/-0.0054mm(T4)21.5 ～ 1.9Concave character (Sequential numbering)2 characters40 ～ 25015 ～ 235--※Designation by WOS-

-

1 Quote 100/-0.0054mm(T4)2.51.5 ～ 2.4Concave character (Sequential numbering)2 characters40 ～ 25015 ～ 235--※Designation by WOS-

-

1 Quote 100/-0.0054mm(T4)31.5 ～ 2.9Concave character (Sequential numbering)2 characters40 ～ 25015 ～ 230--※Designation by WOS-

-

1 Quote 100/-0.0054mm(T4)3.51.5 ～ 3.4Concave character (Sequential numbering)2 characters40 ～ 25015 ～ 230--※Designation by WOS-

-

1 Quote 100/-0.0054mm(T4)41.5 ～ 3.9Concave character (Sequential numbering)2 characters40 ～ 25015 ～ 230--※Designation by WOS-

-

1 Quote 100/-0.0054mm(T4)4.52.5 ～ 4.4Concave character (Sequential numbering)2 characters40 ～ 25015 ～ 230--※Designation by WOS-

-

1 Quote 100/-0.0054mm(T4)53 ～ 4.9Concave character (Sequential numbering)2 characters40 ～ 25015 ～ 230--※Designation by WOS-

-

1 Quote 100/-0.0054mm(T4)5.53.5 ～ 5.4Concave character (Sequential numbering)2 characters40 ～ 25015 ～ 230--※Designation by WOS-

-

1 Quote 100/-0.0054mm(T4)64 ～ 5.9Concave character (Sequential numbering)2 characters40 ～ 25015 ～ 230--※Designation by WOS-

-

1 Quote 100/-0.0054mm(T4)6.54.5 ～ 6.4Concave character (Sequential numbering)2 characters40 ～ 25015 ～ 230--※Designation by WOS-

-

1 Quote 100/-0.0054mm(T4)74.9 ～ 6.9Concave character (Sequential numbering)2 characters40 ～ 25015 ～ 230--※Designation by WOS-

-

1 Quote 100/-0.0054mm(T4)85.9 ～ 7.9Concave character (Sequential numbering)2 characters40 ～ 25015 ～ 230--※Designation by WOS-

-

1 Quote 100/-0.0054mm(T4)96.9 ～ 8.9Concave character (Sequential numbering)2 characters40 ～ 25015 ～ 230--※Designation by WOS-

-

1 Quote 100/-0.0054mm(T4)107.9 ～ 9.9Concave character (Sequential numbering)2 characters40 ～ 25015 ～ 230--※Designation by WOS-

-

1 Quote 100/-0.0054mm(T4)128.9 ～ 11.9Concave character (Sequential numbering)2 characters40 ～ 25015 ～ 230--※Designation by WOS-

-

1 Quote 10-0.01/-0.024mm(T4)10.3 ～ 0.9Concave character (Sequential numbering)1 characters40 ～ 15015 ～ 135-0 ～ 9--

-

1 Quote 10-0.01/-0.024mm(T4)10.3 ～ 0.9Concave character (Sequential numbering)1 characters40 ～ 15015 ～ 135--※Designation by WOS-

-

1 Quote 10-0.01/-0.024mm(T4)1.50.6 ～ 1.4Concave character (Sequential numbering)1 characters40 ～ 20015 ～ 185-0 ～ 9--

-

1 Quote 10-0.01/-0.024mm(T4)1.50.6 ～ 1.4Concave character (Sequential numbering)1 characters40 ～ 20015 ～ 185--※Designation by WOS-

-

1 Quote 10-0.01/-0.024mm(T4)20.8 ～ 1.9Concave character (Sequential numbering)1 characters40 ～ 25015 ～ 235-0 ～ 9--

-

1 Quote 10-0.01/-0.024mm(T4)20.8 ～ 1.9Concave character (Sequential numbering)1 characters40 ～ 25015 ～ 235--※Designation by WOS-

-

1 Quote 10-0.01/-0.024mm(T4)2.50.8 ～ 2.4Concave character (Sequential numbering)1 characters40 ～ 25015 ～ 235-0 ～ 9--

-

1 Quote 10-0.01/-0.024mm(T4)2.50.8 ～ 2.4Concave character (Sequential numbering)1 characters40 ～ 25015 ～ 235--※Designation by WOS-

-

1 Quote 10-0.01/-0.024mm(T4)31 ～ 2.9Concave character (Sequential numbering)1 characters40 ～ 25015 ～ 230-0 ～ 9--

-

1 Quote 10-0.01/-0.024mm(T4)31 ～ 2.9Concave character (Sequential numbering)1 characters40 ～ 25015 ～ 230--※Designation by WOS-

-

1 Quote 10-0.01/-0.024mm(T4)3.51.5 ～ 3.4Concave character (Sequential numbering)1 characters40 ～ 25015 ～ 230-0 ～ 9--

Loading...

  1. 1
  2. 2
  3. 3
  4. Next >>
 

Basic information

Material EN 1.3343 Equiv. Shaft diameter tolerance (Reference tolerance) 0/-0.02 Surface treatment No
Tip shape No Gas release shape No

Configure

Clear all

142Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Tip diameter tolerance (Reference tolerance)

    • 0/-0.005
    • -0.01/-0.02

    Clear

  • Head thickness

    • 4mm(T4)
    • 6mm(JIS)
    • 8mm(JIS)

    Clear

  • D (Shaft diameter)(mm)

    • 1
    • 1.5
    • 2
    • 2.5
    • 3
    • 3.5
    • 4
    • 4.5
    • 5
    • 5.5
    • 6
    • 6.5
    • 7
    • 8
    • 9
    • 10
    • 12

    Clear

  • P (Tip diameter)(mm)

     [0.3-11.9/0.01mm Unit(s)]

    Clear

  • Number of engraving characters

    • 1 characters
    • 2 characters
    • 3 characters
    • 4 characters
    • 5 characters

    Clear

  • L (L dimension)(mm)

     [40-250/0.01mm Unit(s)]

    Clear

  • N(mm)

     [15-235/1mm Unit(s)]

    Clear

  • #

    • #

    Clear

  • Characters for engraving(Number designation)

     [0-9/1Number designation Unit(s)]

    Clear

  • Engraving character designation

    • ※Designation by WOS

    Clear

  • Engraving character selection

    • % (Space)
    • &
    • +
    • <
    • >
    • @
    • A
    • B
    • C
    • D
    • E
    • F
    • G
    • H
    • I
    • J
    • K
    • L
    • M
    • N
    • O
    • P
    • Q
    • R
    • S
    • T
    • U
    • V
    • W
    • X
    • Y
    • Z
    • \\(/)

    Clear

  • Type

    • EHSF1M
    • EHSF1MR
    • EHSF2M
    • EHSF2MR
    • EHSF3M
    • EHSF4M
    • EHSF5M
    • EHSFE1M
    • EHSFE1MR
    • EHSFE2M
    • EHSFE2MR
    • EHSFE3M
    • EHSFE4M
    • EHSFE5M
    • EHSJF1M
    • EHSJF1MR
    • EHSJF2M
    • EHSJF2MR
    • EHSJF3M
    • EHSJF4M
    • EHSJF5M
    • EHSJFE1M
    • EHSJFE1MR
    • EHSJFE2M
    • EHSJFE2MR
    • EHSJFE3M
    • EHSJFE4M
    • EHSJFE5M

    Clear

  • Character engraving type

    • Concave character
    • Concave character (Sequential numbering)

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Optional Attributes

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Metody płatności

Faktura

Przedpłata

PayPal

Produkcja na zamówienie

Zmiana widoku

Certyfikaty

  • ISO-9001
  • ISO-14001
  • Certyfikat AEO
  • RoHS
  • REACH

MISUMI na świecie

Media społecznościowe

Nota prawna

Copyright © MISUMI Corporation All Rights Reserved.