Screw-Hole-Related Tools（Coating Type：TiCN）

Search by sub-category

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

SG Spiral Tap SGSP

NACHI(FUJIKOSHI)

[Features]
-Demonstrates excellent performance in a variety of materials, machining equipment and a wide range of cutting conditions.

Select to compare

Configure now
Starting from^∗ ：	30.24 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 31/12/2024

Groove-Free Tap Series X Performer S-XPF

OSG

When working carbon steel and alloyed steel has fewer problems with cutting debris compared to cutting taps, allowing longer lasting machining. Particularly effective in working with automobile related cast steel parts
* M2.6 and below will be changed to constant powdered high strength steel (CPM). Please understand ahead of time.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	19.66 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Taper Tap Series for Pipes V Coating Powder HSS (For High Hardness Steel) V-XPM-TPT

OSG

Used for machining of pipe taper female threads, but is suitable for easy processing conditions

Select to compare

Configure now
Starting from^∗ ：	45.80 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Groove-Free Tap Series VP New Roll Long Shank VP-LT-NRT

OSG

Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

Select to compare

Configure now
Starting from^∗ ：	24.43 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

High Performance Roll Tap HP+ RZ / HP-RZ

YAMAWA MFG

It is suitable for processing steel materials (35 HRC or less) and light alloys, and can support high-speed machining (20-50 m/min)

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	24.43 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 31/12/2024

Groove-Free Tap Series VP New Roll Short Chamfer VP-SC-NRT

OSG

Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	19.89 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Seamless TAFLET

TANOI MFG

Rise tap with a correct bite without pitch or angle errors.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	58.01 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Claw Tap 300 TiCN Coating (for Metal Screws)

SANDVIK

The taps are available for every material, which makes selection easier.
Hole type: For blind holes
Coating: Surface treatment for steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	44.15 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

CoroTap 200 3 × DN Point Tap JIS EP0DM

SANDVIK

[Features]
·Wide selection of power strip for different work materials
·For work materials with long cutting chips

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	38.34 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Excel Hand Tap EHT

NACHI(FUJIKOSHI)

Suitable for mass tapping of aluminum/cast iron.

Select to compare

Configure now
Starting from^∗ ：	129.51 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 31/12/2024

Drill Tap Series Spiral Taps with Drills V-DR-SFT

OSG

For Through Hole Machining Only

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	51.61 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Hand Tap Series, Hand Taps for Super High Hardness Steel, WH55-OT

OSG

Suitable for threading hardened steel up to 55 HRC.
Material: High hardness steel up to 55 HRC
For coating / surface treatment / steel
Accuracy (class) OH3

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	83.34 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, V Coating Powder High-Speed Steel, VP-SFT

OSG

Optimal for machining pre-hardened steel alloys from 35 to 42 HRC.
Tool material: Powder metal high-speed steel
Thread type: Metric
Hole type: For blind holes
Material: General steel / heat-treated steel
Coating: Surface treatment for steel.

Select to compare

Configure now
Starting from^∗ ：	17.33 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 31/12/2024

Hand Tap Series, V Coating Powder High Speed (High Hardness Steel), V-XPM-HT

OSG

Suitable for 42-52 HRC tempered steel (alloy steel, die steel, tool steel, etc.) tapping. Excellent Abrasion Resistant V Coating Has Been Applied to Maximize the Properties of the Base Material on the Surface

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	26.47 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Hand Tap Series, Hand Taps for Super High Hardness Steel, VX-OT

OSG

Suitable for 50 HRC and up Tempered Steel (Alloy Steel, Die Steel, Tool Steel, Etc.) Tapping

Select to compare

Configure now
Starting from^∗ ：	83.75 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, V Coated, V-POT

OSG

Compatible with a wide range of materials - soft materials to hard materials. Displays particularly good performance in tapping under high speed, highly dilution (water soluble cutting fluid) conditions. Also Effective For Dry-Tapping

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	24.73 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, V Coating, Long Shank, V-LT-POT

OSG

Select to compare

Configure now
Starting from^∗ ：	23.17 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Taper Tap Series for Pipes V Coated Carbide (For High Hardness Steel) VX-TPT

OSG

Exhibits Exceptional Power Toward 50-60 HRC and up Tempered Steel (Alloy Steel, Die Steel, Tool Steel, etc.)

Select to compare

Configure now
Starting from^∗ ：	168.46 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Taper Tap Series for Pipes For Aluminum V-AL-TPT

OSG

Ideal for taper female screw machining for aluminum alloy tube, as gouging of female screw occurs easily

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	27.23 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Groove-Free Tap Series IT New Roll IT-NRT

OSG

Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	19.82 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Groove-Free Tap Series VP New Roll VP-NRT

OSG

Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

Volume Discount

Select to compare

Configure now
Min. Shipping Days ：	6 Days

Groove-Free Tap Series V Coating For Thin Sheet V-SS-NRT

OSG

Well suited for thread cutting of soft steel sheets with a pull strength of 700N or below. Reduces burrs, whiskers, and tears.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	22.33 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Groove-Free Tap Series Ultra Synchronized Tap US-AL-NRT

OSG

Through the use of plastic deformation, high speed, high precision female screw processing is done on aluminum and aluminum alloys without producing any chips

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	19.52 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing ends 31/12/2024

IT-Toughlet TiCN Coated

TANOI MFG

Rise tap with a correct bite without pitch or angle errors.

Select to compare

Configure now
Starting from^∗ ：	38.28 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Long Seamless TAFLET

TANOI MFG

Cold forming tap with correct chamfer without pitch and angle errors.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	76.21 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Thread Cutter for Blind Hole / Through Hole TM SP for 2 X D 3737

GUHRING

[Features]
· Threading is performed with helical cutting.
· If the pitch is the same, one unit can process threads with different diameters.
· Both right-handed and left-handed female threads can be machined.

Select to compare

Configure now
Starting from^∗ ：	254.77 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Thread Cutter for Blind Hole / Through Hole TM SP for 2 X D 4133

GUHRING

Select to compare

Configure now
Starting from^∗ ：	196.80 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

HD Series Dry Machining Spiral Tap for Carbon Steel / Alloy Steel HDISP

YAMAWA MFG

Uses a center through hole shape that supports internally lubricating machines, and can perform both mist and dry machining. Suitable for blind holes on carbon steel and alloy steel, processing in vertical and horizontal directions.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	36.15 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

HF Spiral Tap for Through Holes Used in Series Dry Machining of Carbon / Alloy Steel HDISL

YAMAWA MFG

We have adopted the side through-hole shape by dry machining and ultra-high-speed machining.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	36.15 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

HF Series Ultra-High Speed Spiral Tap for Cast Aluminum / Die Cast Aluminum HFAHS

YAMAWA MFG

Uses a center through hole shape that supports internally lubricating machines, and can perform ultra high speed machining. It is suitable for blind hole such as cast aluminum, and it is for the vertical direction processing.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	36.15 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

HF Series Ultra-High Speed Spiral Tap for Cast Aluminum / Die Cast Aluminum HFASP

YAMAWA MFG

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	36.15 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

HF Series Ultra-High Speed Spiral Tap for Carbon Steel / Alloy Steel HFIHS

YAMAWA MFG

Uses a center through hole shape that supports internally lubricating machines, and can perform ultra high speed machining. It is suitable for blind hole of alloy steel, carbon steel, and it is for the vertical direction processing.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	36.15 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

HF Series Ultra-High Speed Spiral Tap for Carbon Steel / Alloy Steel HFISP

YAMAWA MFG

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	36.15 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

H Series Dry Machining Spiral Tap for Cast Aluminum / Die Cast Aluminum HDASP

YAMAWA MFG

Uses a center through hole shape that supports internally lubricating machines, and can perform both mist and dry machining. Suitable for blind holes on aluminum castings, processing in vertical and horizontal directions.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	36.15 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Short Chamfer Torqueless Roll Taps SC-TL-RZ

YAMAWA MFG

The number of chamfer threads is just 1, creating a roll tap with specially shaped threading parts for achieving low torque use.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	29.71 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Dry Processing Roll Tap OL+RZ / OL-RZ

YAMAWA MFG

It is a roll tap that's capable of tapping without lubrication for burred thin iron plates and steel with relatively short processing length at the size of M6 or less.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	27.00 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Excel Spiral Tap ESP

NACHI(FUJIKOSHI)

Select to compare

Configure now
Starting from^∗ ：	184.77 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SG Point Tap SGPO

NACHI(FUJIKOSHI)

[Features]
・ A tap for through-holes, supporting various cutting speeds, machinery, and work materials.

Select to compare

Configure now
Starting from^∗ ：	30.44 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Chamfer threads (Lcf)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)

	Select to compare	Select to compare Promotional pricing ends 31/12/2024	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing ends 31/12/2024	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing ends 31/12/2024	Select to compare	Select to compare	Select to compare Promotional pricing ends 31/12/2024	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing ends 31/12/2024	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	NACHI(FUJIKOSHI)	OSG	OSG	OSG	YAMAWA MFG	OSG	TANOI MFG	SANDVIK	SANDVIK	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	TANOI MFG	TANOI MFG	GUHRING	GUHRING	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)
Product Series	SG Spiral Tap SGSP	Groove-Free Tap Series X Performer S-XPF	Taper Tap Series for Pipes V Coating Powder HSS (For High Hardness Steel) V-XPM-TPT	Groove-Free Tap Series VP New Roll Long Shank VP-LT-NRT	High Performance Roll Tap HP+ RZ / HP-RZ	Groove-Free Tap Series VP New Roll Short Chamfer VP-SC-NRT	Seamless TAFLET	Spiral Tap Claw Tap 300 TiCN Coating (for Metal Screws)	CoroTap 200 3 × DN Point Tap JIS EP0DM	Excel Hand Tap EHT	Drill Tap Series Spiral Taps with Drills V-DR-SFT	Hand Tap Series, Hand Taps for Super High Hardness Steel, WH55-OT	Spiral Tap Series, V Coating Powder High-Speed Steel, VP-SFT	Hand Tap Series, V Coating Powder High Speed (High Hardness Steel), V-XPM-HT	Hand Tap Series, Hand Taps for Super High Hardness Steel, VX-OT	Point Tap Series, V Coated, V-POT	Point Tap Series, V Coating, Long Shank, V-LT-POT	Taper Tap Series for Pipes V Coated Carbide (For High Hardness Steel) VX-TPT	Taper Tap Series for Pipes For Aluminum V-AL-TPT	Groove-Free Tap Series IT New Roll IT-NRT	Groove-Free Tap Series VP New Roll VP-NRT	Groove-Free Tap Series V Coating For Thin Sheet V-SS-NRT	Groove-Free Tap Series Ultra Synchronized Tap US-AL-NRT	IT-Toughlet TiCN Coated	Long Seamless TAFLET	Thread Cutter for Blind Hole / Through Hole TM SP for 2 X D 3737	Thread Cutter for Blind Hole / Through Hole TM SP for 2 X D 4133	HD Series Dry Machining Spiral Tap for Carbon Steel / Alloy Steel HDISP	HF Spiral Tap for Through Holes Used in Series Dry Machining of Carbon / Alloy Steel HDISL	HF Series Ultra-High Speed Spiral Tap for Cast Aluminum / Die Cast Aluminum HFAHS	HF Series Ultra-High Speed Spiral Tap for Cast Aluminum / Die Cast Aluminum HFASP	HF Series Ultra-High Speed Spiral Tap for Carbon Steel / Alloy Steel HFIHS	HF Series Ultra-High Speed Spiral Tap for Carbon Steel / Alloy Steel HFISP	H Series Dry Machining Spiral Tap for Cast Aluminum / Die Cast Aluminum HDASP	Short Chamfer Torqueless Roll Taps SC-TL-RZ	Dry Processing Roll Tap OL+RZ / OL-RZ	Excel Spiral Tap ESP	SG Point Tap SGPO
Starting from^∗	30.24 € *Unit price with basic configuration	19.66 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024 Volume Discount	45.80 € *Unit price with basic configuration	24.43 € *Unit price with basic configuration	24.43 € *Unit price with basic configuration Volume Discount	19.89 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024 Volume Discount	58.01 € *Unit price with basic configuration	44.15 € *Unit price with basic configuration Volume Discount	38.34 € *Unit price with basic configuration Volume Discount	129.51 € *Unit price with basic configuration	51.61 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024 Volume Discount	83.34 € *Unit price with basic configuration Volume Discount	17.33 € *Unit price with basic configuration	26.47 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024 Volume Discount	83.75 € *Unit price with basic configuration	24.73 € *Unit price with basic configuration Volume Discount	23.17 € *Unit price with basic configuration	168.46 € *Unit price with basic configuration	27.23 € *Unit price with basic configuration Volume Discount	19.82 € *Unit price with basic configuration Volume Discount	- Volume Discount	22.33 € *Unit price with basic configuration Volume Discount	19.52 € *Unit price with basic configuration Volume Discount	38.28 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024	76.21 € *Unit price with basic configuration	254.77 € *Unit price with basic configuration	196.80 € *Unit price with basic configuration	36.15 € *Unit price with basic configuration Volume Discount	36.15 € *Unit price with basic configuration Volume Discount	36.15 € *Unit price with basic configuration Volume Discount	36.15 € *Unit price with basic configuration Volume Discount	36.15 € *Unit price with basic configuration Volume Discount	36.15 € *Unit price with basic configuration Volume Discount	36.15 € *Unit price with basic configuration Volume Discount	29.71 € *Unit price with basic configuration Volume Discount	27.00 € *Unit price with basic configuration Volume Discount	184.77 € *Unit price with basic configuration	30.44 € *Unit price with basic configuration
Min. Shipping Days	6 Days	Same day	6 Days	6 Days	6 Days	Same day	6 Days	5 Days	5 Days	6 Days	Same day	6 Days	6 Days	Same day	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	Same day	6 Days	8 Days	8 Days	8 Days	8 Days	7 Days	8 Days	8 Days	7 Days	8 Days	6 Days	6 Days	6 Days	6 Days
Screw Types	Meter	Meter	Taper for Pipe	Meter / Unified	Meter / Unified	Meter / Unified	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Taper for Pipe	Taper for Pipe	Meter / Unified	Meter / Unified	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter / Unified	Meter	Meter
Screw size (Nominal)	M2 ～ M24	M1 ～ M45	R1 ～ R3/8	M1 ～ M12	No.10-32UNF ～ M20	M1 ～ No6UN	M2 ～ M20	M3 ～ M24	M3 ～ M24	M3 ～ M12	M4	M3 ～ M12	M3 ～ M12	M3 ～ M12	M3 ～ M12	M8 ～ M10	M4 ～ M6	R1/2 ～ R3/8	R1 ～ R3/8	M1 ～ No4UN	M1 ～ M12	M6	M3	M1 ～ M10	M4 ～ M6	M6 ～ M20	M6 ～ M20	M6 ～ M20	M6 ～ M20	M6 ～ M20	M6 ～ M20	M6 ～ M20	M6 ～ M20	M6 ～ M20	M1 ～ M6	No.10-32UNF ～ M6	M4 ～ M12	M1.4 ～ M24
Pitch (P), Number of Threading(mm)	0.25 ～ 3	0.2 ～ 4.5	11 ～ 28	0.25 ～ 56	0.25 ～ 1.75	0.25 ～ 56	0.4 ～ 2.5	0.5 ～ 3	0.5 ～ 3	0.5 ～ 1.75	0.7	0.5 ～ 1.75	0.5 ～ 1.75	0.5 ～ 1.75	0.5 ～ 1.75	1 ～ 1.25	0.7 ～ 1	14 ～ 28	11 ～ 28	0.25 ～ 56	0.25 ～ 56	1	0.5	0.2 ～ 1.5	0.7 ～ 1	1 ～ 2.5	1 ～ 2.5	1 ～ 1.75	1 ～ 1.75	1 ～ 1.75	1 ～ 1.75	1 ～ 1.75	1 ～ 1.75	1 ～ 1.75	0.2 ～ 1	0.25 ～ 1	0.7 ～ 1.75	0.25 ～ 3
Chamfer threads (Lcf)	2.5	2P ～ 4P	3P	2P ～ 4P	2P ～ 4P	1P	1P ～ 2P	2P	-	1.5P ～ 3P	2.5P	2.5P ～ 5P	2.5P	2.5P ～ 5P	3P	5P	5P	3P	2.5P	2P	2P ～ 4P	8P	2P	1P ～ 4P	1P ～ 2P	-	-	2.5P	5P	2.5P	2.5P	2.5P	2.5P	2.5P	1P	4P	2.5	5
Tool Material Type	Alloy HSS	Powder high-speed steel / Vanadium High-Speed Steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	High-speed steel	-	-	Carbide	Vanadium High-Speed Steel	Carbide	Powder high-speed steel	Powder high-speed steel	Carbide	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Carbide	Vanadium High-Speed Steel	Powder high-speed steel	Powder high-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	High-speed steel	High-speed steel	Carbide	Carbide	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Carbide	High-speed steel
work material	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Quenched and tempered steel (45 to 55 HRC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless Steel (JIS-SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	-	-	Cast Iron (FC)[◎] / Copper (Cu)[◎] / Aluminum Alloy Casting (AC, ADC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎]	Quenched and tempered steel (45 to 55 HRC)[◎]	High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎]	Quenched and tempered steel (45 to 55 HRC)[◎]	High Hardness Steel (50-60 HRC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○/◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	High Hardness Steel (50-60 HRC)[◎]	Copper (Cu)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○]	Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless Steel (JIS-SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	-	-	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○]	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]
Tap Type	Spiral Tap	Roll tap	Tap for pipes	Roll tap	Roll tap	Roll tap	Roll tap	Spiral Tap	Point tap	Hand Tap	Spiral Tap	Hand Tap	Spiral Tap	Hand Tap	Hand Tap	Point tap	Point tap	Tap for pipes	Tap for pipes	Roll tap	Roll tap	Roll tap	Roll tap	Roll tap	Roll tap	Thread cutter	Thread cutter	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Roll tap	Roll tap	Spiral Tap	Point tap
Hole type	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For through hole / For blind hole	For blind hole	-	For blind hole	-	For through hole / For blind hole	-	For through hole / For blind hole	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole	For through hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For blind hole	For through hole	For through hole / For blind hole	-	-	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For through hole	For through hole / For blind hole	For through hole
Coating Y/N	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	N/A	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available
Coating Type	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN	TiCN
Overall Length (L)(mm)	40 ～ 120	30 ～ 220	59 ～ 109	60 ～ 200	36 ～ 105	30 ～ 62	40 ～ 105	46 ～ 120	46 ～ 120	46 ～ 82	65	46 ～ 82	46 ～ 82	46 ～ 82	46 ～ 82	70 ～ 75	100	59 ～ 87	55 ～ 95	30 ～ 46	30 ～ 82	62	46	30 ～ 75	70 ～ 120	54 ～ 102	54 ～ 102	62 ～ 105	62 ～ 105	62 ～ 105	62 ～ 105	62 ～ 105	62 ～ 105	62 ～ 105	36 ～ 62	36 ～ 62	52 ～ 82	34 ～ 120

Filter by:

Stock

- Show only stock items
Clear

Screw Types
- Meter
- Unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
Clear

Screw size (Nominal)
CTG-54

CTG-42

CTG-36

CTG-28

CTG-22

CTG-16

No0UN

NO.0-80UNF

No.0-80UNF

No.10

S0.1

NO.1-72UNF

No.1-72UNF

NO.1-64UNC

No.1-64UNC

NO.10-32UNF

No.10-32UNF

NO.10-24UNC

No.10-24UNC

No.12

No.12-32UNEF

NO.12-28UNF

No.12-28UNF

NO.12-24UNC

No.12-24UNC

No.2

S0.2

NO.2-64UNF

No.2-64UNF

NO.2-56UNC

No.2-56UNC

No.3

S0.3

NO.3-56UNF

No.3-56UNF

NO.3-48UNC

No.3-48UNC

No.4

S0.4

NO.4-48UNF

No.4-48UNF

NO.4-40UNC

No.4-40UNC

No.5

S0.5

NO.5-44UNF

No.5-44UNF

NO.5-40UNC

No.5-40UNC

No.6

S0.6

NO.6-40UNF

No.6-40UNF

No.6-32UNC

S0.7

No.8

S0.8

NO.8-36UNF

No.8-36UNF

NO.8-32UNC

No.8-32UNC

S0.9

1"

1UN

1UNS

G1

G 1"

M1

NPS1

NPT1

NPTF1

No1UN

PF1

PF 1

PT 1

R1

Rp1

S1

UNC 1

UNC 1"

UNF 1"

W1

1´-20UNEF

1´-14UNS

1'-12UNF

1´-12UNF

1´-11

1′-11

1-8UNC

1'-8UNC

1´-8UNC

G1"-3"

1"1/2UN

1"1/2

G1"1/2

NPS1"1/2

NPT1"1/2

R1"1/2

Rp1"1/2

W1"1/2

1´1/2-11

1′1/2-11

1 1/2-8UN

1"1/4UN

1"1/4

G1"1/4

NPS1"1/4

NPT1"1/4

R1"1/4

Rp1"1/4

W1"1/4

1´1/4-11

1′1/4-11

1 1/4-8UN

1"1/8UN

G1"1/8

R1"1/8

W1"1/8

1 1/8-8UN

1´ 1/8-7UNC

1"1/16UN

1/2

1/2UN

G1/2

G 1/2

NPS1/2

NPT1/2

NPTF1/2

PF 1/2

PT 1/2

R1/2

Rc1/2

Rp1/2

UNC 1/2

UNF 1/2

UNJF 1/2

W1/2

1/2-28UNEF

1/2-20UNF

1/2-14

1/2-13UNC

G1/2 5/8

1/2W12

1 3/4

1"3/4UN

G1"3/4

R1"3/4

Rp1"3/4

W1"3/4

1′3/4-11

1 3/4-8UN

1 3/8

1"3/8UN

G1"3/8

R1"3/8

W1"3/8

1 3/8-8UN

1/4

1/4UN

G1/4

G 1/4

NPS1/4

NPT1/4

NPTF1/4

PF1/4

PF 1/4

PS 1/4

PT 1/4

R1/4

Rc1/4

Rp1/4

SM1/4

UNC 1/4

UNF 1/4

UNJF 1/4

W1/4

1/4-32UNEF

1/4-28UNF

1/4-20UNC

1/4-19

1/4W20

W1"5/8

1 5/8-8UN

W1"7/8

1 7/8-8UN

1'W8

1/8

G1/8

G 1/8

NPS1/8

NPT1/8

NPTF1/8

PF1/8

PF 1/8

PT 1/8

R1/8

Rc1/8

Rp1/8

SM1/8

W1/8

1/8-28

1/8SM40

1/8SM44

1/16

G1/16

NPS1/16

NPT1/16

R1/16

Rp1/16

1/16-28

1/16SM80

M1.1

G 1.1/2

G 1.1/4

G 1.1/8

M1.2

S1.2

M1.4

S1.4

M1.6

M1.7

M1.8

2"

2UN

G2

M2

M2.0

NPS2

NPT2

No2UN

R2

Rp2

UNC 2

UNF 2

W2

2´-11

2′-11

2-8UN

G2"1/2

R2"1/2

Rp2"1/2

2′1/2-11

W2"1/4

M2.2

M2.3

M2.5

M2.6

3M

EGM 3

G3

M3

M3.0

No3UN

R3

Rp3

STI M3

UNC 3

UNF 3

3′-11

G3"1/2

R3"1/2

Rp3"1/2

3/4

3/4UN

G3/4

G 3/4

NPS3/4

NPT3/4

NPTF3/4

PF 3/4

R3/4

Rp3/4

UNC 3/4

UNF 3/4

W3/4

3/4-20UNEF

3/4-16UNF

3/4-14

3/4-10UNC

3/4W10

3/8

3/8UN

G3/8

G 3/8

NPS3/8

NPT3/8

NPTF3/8

PF3/8

PF 3/8

PT 3/8

R3/8

Rc3/8

Rp3/8

UNC 3/8

UNF 3/8

UNJF 3/8

W3/8

3/8-32UNEF

3/8-24UNF

3/8-19

3/8-16UNC

3/8W16

M3 - M10

M3～10

M3 - M12

SM3/16

W3/16

3/16SM24

3/16W24

3/16SM28

3/16SM32

3/16SM40

M3 - M18

SM3/32

3/32SM56

3/32SM100

3.5

M3.5

4

4M

EGM 4

G4

M4

M4.0

MF4

No4UN

R4

Rp4

STI M4

UNC 4

UNF 4

№4-40UNC

M4～6

M4.5

5M

EGM 5

M5

M5.0

MF5

No5UN

STI M5

UNC 5

№5-40UNC

5/8

5/8UN

G5/8

G 5/8

NPS5/8

R5/8

UNC 5/8

UNF 5/8

W5/8

5/8-24UNEF

5/8-18UNF

5/8-11UNC

G5/8 3/4

5/8W11

M5 - M12

M5～13

5/16

5/16UN

UNC 5/16

UNF 5/16

UNJF 5/16

W5/16

5/16-32UNEF

5/16-24UNF

5/16-18UNC

5/16W18

W5/32

5/64SM64

5.5M

M5.5

6

EGM 6

M6

M6.0

MF6

No6UN

STI M6

UNC 6

UNF 6

UNJC 6

No6-40UNF

№6-32UNC

M7

MF7

PG7

7 execution M3 - M12

7/8

7/8UN

G7/8

G 7/8

NPS7/8

R7/8

UNC 7/8

UNF 7/8

W7/8

7/8-20UNEF

7/8-14UNF

7/8-9UNC

7/8W9

7/16

7/16UN

UNC 7/16

UNF 7/16

UNJF 7/16

W7/16

7/16-28UNEF

7/16-20UNF

7/16-14UNC

7/16W14

SM7/32

7.5

M7.5

EGM 8

M8

MF8

No8UN

STI M8

Tr8

UNC 8

UNF 8

UNJC 8

№8-32UNC

9

M9

PG9

9/16

9/16UN

UNC 9/16

UNF 9/16

9/16-18UNF

9/16-12UNC

9/16W12

SM9/32

SM9/64

9/64SM40

M9.5

EGM 10

M10

MF10

No10UN

STI M10

Tr10

Tr 10

UNC10

UNC 10

UNF 10

UNJF 10

№10-32UNF

№10-24UNC

M10～25

M11

PG11

SM11/32

SM11/64

11/64SM40

EGM 12

M12

MF12

Mf12

No12UN

STI M12

Tr12

Tr 12

UNC 12

UNF 12

M12 x 1.5

M13

PG13.5

M14

MF14

Tr 14

M15

SM15/64

15/64SM28

M16

MF16

Mf16

PG16

Tr16

Tr 16

M16 x 1.5

M17

M18

MF18

Tr18

Tr 18

M19

M20

MF20

Mf20

Tr 20

M20 x 1.5

M21

PG21

M22

M22X

MF22

Tr 22

M23

M24

M24X

MF24

Tr 24

M25

M25X

MF25

Mf25

Tr 25

M25 x 1.5

M26

MF26

Tr 26

M27

MF27

M28

MF28

Tr 28

PG29

M30

MF30

Tr 30

M32

Mf32

M33

M34

M35

M36

PG36

M37

M38

M39

M40

M42

PG42

M44

M45

M46

M48

M50

M52

M56

M64

1015

1020N100M

1020N150M

06510X28R

10154

12204

12254N100M

12254N150M

12254N200M

16304N100M

16304N150M

16304N200M

16304N250M

20305

20505N100M

20505N150M

20505N200M

20505N300M

20505N350M

25506N100M

25506N150M

25506N200M

25506N300M

25506N350M

32506

32506N150M

32506N200M

32506N300M

035083N075M

035083N080M

040123N100M

060163N050M

060163N100M

060163N125M

065103X28G

075203N125M

075203N150M

080153X19G

080153X19R

080203N050M

080203N100M

090244N125M

090244N175M

100254N050M

100254N100M

100254N150M

100254N200M

120204X14G

120204X14R

120304N100M

120304N150M

120304N200M

160264X11G

160264X11R

160404N150M

160404N200M

160404N250M

200305X11G

200305X11R

200505N150M

200505N200M

200505N300M
Clear

Pitch (P), Number of Threading(mm)
.02

0.025

0.05

0.08

0.1

0.125

0.15

0.175

0.2

0.225

0.25

0.3

0.35

0.4

0.45

0.5

0.6

0.7

0.75

0.8

0.9

1

1.1

1.25

1.4

1.5

1.75

1.9

2

2.5

2.8

3

3.5

4

4.5

5

5.5

6

7

8

9

10

11

11 1/2

11.5

12

13

14

16

18

19

20

24

27

28

32

36

40

44

48

56

64

72

80
Clear

Chamfer threads (Lcf)
1P

1.5

1.5-Shaped

1.5 P

1.5P

2

2 P

2P

2.5

2.5 P

2.5P

3 P

3P

3.5P

4

4 P

4P

4.5P

5

5 P

5P

5.5P

6P

7P

8P

9 P

9P

22P

22.5P

23P

24P

24.5P

25P

26P

27P

28P

30P
Drawing

Clear

Tool Material Type
- High-speed steel
- Cobalt HSS
- Powder high-speed steel
- Carbide
- Alloy HSS
- Vanadium High-Speed Steel
- JIS-SKS
Details

Clear

work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
Clear

Tap Type
- Spiral Tap
- Point tap
- Roll tap
- Hand Tap
- Tap for pipes
- Thread cutter
- Thread-Cutting-Related Tool
- Die
- Tap wrench
- Modification/removal Tool
- Oil Hole Tap
Clear

Hole type
- For through hole
- For blind hole
Clear

Coating Y/N
- Available
- N/A
Clear

Coating Type
- For High Hardness (Silicon Group)
- TiAlN
- TiCN
- TiN
- DLC
- CrN
- Non-Coated
- Nitriding Treatment
- Other
Details

Clear

Overall Length (L)(mm)
16

30

32

33

34

35

36

38

39

40

41

41.5

42

44

44.5

45

46

47.62

47.625

48

49

49.21

50

50.8

51

52

53

53.975

53.98

54

55

55.28

55.64

55.92

56

57

58

59

59.5

60

60.32

60.325

61

61.5

62

62.52

62.65

63

63.5

64

65

66

67

68

69

69.06

69.063

69.42

69.71

70

72

73

74

74.61

74.625

75

76

78

79

79.03

79.31

80

80.17

82

83

84

85

85.72

87

88

89

89.12

89.18

90

91

91.28

92

95

96

96.84

98.97

99

99.21

100

101

102

104

105

108

109

109.65

110

111

112

113.5

115

118

119

120

121

125

130

130.175

130.2

135

136

140

145

150

155

160

163

165

170

175

180

185

190

195

200

205

210

220

224

225

230

250

260

270

280

290

300

310

315

460
Drawing

Clear

Brand

- MISUMI (0)
- Cost Efficient Products ()
- OSG (17)
- YAMAWA MFG (10)
- NACHI(FUJIKOSHI) (4)
- TANOI MFG (3)
- GUHRING (2)
- SANDVIK (2)
- SKC (0)
- NS TOOL (0)
- BERNSTEIN AG (0)
- KANETEC (0)
- MITSUTOMO (0)
- NEW STRONG (0)
- STAHLWILLE (0)
- H & H (0)
- RUKO (0)
- WALTER PROTOTYP (0)
- BAHCO (0)
- ENGINEER (0)
- LIGHTSEIKI (0)
- CARMEX (0)
- HAZET (0)
- TRUSCO NAKAYAMA (0)
- WERA (0)
- WIHA (0)
- FEIN (0)
- EIKOSHA (0)
- ISHIHASHI (0)
- RENNSTEIG (0)
- GEDORE (0)
- ESCO (0)
- REX TOOLS (0)
- NOGAJAPAN (0)
Clear