Insert

Search by sub-category

329

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

1
2
3
4
5
Next >>

Self-Tapping Inserts / Slotted

MISUMI

It is a split groove threaded insert, threaded on both the inner and outer diameters.
Fasteners that do not require a front force strip to compensate for the mechanical strength of threaded sections made of materials with relatively low strength.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	1.24 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Insert Nitronics 60

RECOIL

Insert to prevent screw galling (seizing). No lubricating oil required. (Helisert and sprue).

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	2.80 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Dodge Bit Insert (Standard) SB Brass (Cadmium-Free)

Dodge Bit Insert (Standard) SB Brass (Cadmium-Free)【1-8,000 Pieces Per Package】

TOKAI METAL INDUSTRY

A general-purpose well-balanced screw insert with low cost.
[Features]
・ At the time of press-fit, the product has direction.
・ An insert nut that is well balanced in all aspects including easy use, holding power, cost, etc.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.16 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Thread Inserts

MISUMI

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	1.03 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Ultrasert UD2 / UD4 (Brass Cadmium-Free)

Ultrasert UD2 / UD4 (Brass Cadmium-Free)【1-5,000 Pieces Per Package】

TOKAI METAL INDUSTRY

These inserts are the best choice for easy and secure fitment into plastic holes.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.24 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Ensat, Slotted Type 302

KKV

Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

Volume Discount

Stock

Select to compare

Configure now
Starting from^∗ ：	0.47 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Threaded inserts self-tapping with cutting slot (K0978)

KIPP

[Specifications]
・Version 1: Self-tapping
・Version 2: With cutting slot
・Material: Stainless steel, Steel
・Surface finish body: Bright, galvanised
・D1=Internal thread: M3-M16

[Features]
・For making high-strength screw connections in materials with low shear strength
・Guarantees secure and firm anchoring in the host material
・Ideal for difficult-to-machine materials
・Version: steel or stainless steel

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	0.36 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Tangless Inserts Installation / Removal Tools

MISUMI

Volume Discount

Stock

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	164.48 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Dodge Bit Insert Flange Type (Brass Cadmium-Free)

Dodge Bit Insert Flange Type (Brass Cadmium-Free)【1-5,000 Pieces Per Package】

TOKAI METAL INDUSTRY

General purpose type. Low cost and well balanced.

Volume Discount

Stock

Select to compare

Configure now
Starting from^∗ ：	0.29 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Thread Inserts / Tangless

MISUMI

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	1.90 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Tangless Insert Insertion Tool

ACCURATE

A tangless insert metric coarse insertion tool.

Select to compare

Configure now
Starting from^∗ ：	116.01 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Stainless Steel / Insert Nut Threaded Type / IRU

HIROSUGI-KEIKI

[Nominal of Thread (M)] 2/2.5/2.6/3/4/5/6/8
[Material] Free-Cutting Stainless Steel (SUS303)
[Processing] Degreasing

Select to compare

Configure now
Starting from^∗ ：	0.98 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Brass Bit Insert (Flanged) / HFB

HIROSUGI-KEIKI

[Nominal of Thread (M)] 2/2.6/3/4/5
[Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
[Processing] Degreasing

Select to compare

Configure now
Starting from^∗ ：	0.42 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Tangless Insert Metric Coarse Phosphor Bronze

ACCURATE

We recommend using this on anti-magnetic works or locations.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.64 €
Min. Shipping Days ：	9 Days

*Unit price with basic configuration

Promotional pricing

Serrated locking plates, Stainless Steel

GANTER

With the aid of Stainless Steel-Serrated locking plates GN 187.4 standard components can be interlocked and firmly set at a defined angle.
The angular position of the fixing bores in relation to the serrations is not defined in the standard design. The exact positioning is available as special design.
The range of designs makes these plates adapt-able for almost any application in this particular field. To complement these serrated locking plates, accessories such as guide pots GN 187.1 and thrust springs GN 187.2 are useful additional standard parts.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	11.38 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

DIN 7965 Screwed inserts

REYHER

RAMPA couplings; Screwed inserts; Slotted nuts

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.36 €
Min. Shipping Days ：	2 Days

*Unit price with basic configuration

Threaded Inserts (K0398)

KIPP

[Specifications]
・Version 1: Standard
・Material: Steel, Stainless steel
・Core drill φ(mm): 6.9-14.8
・D1=Internal thread: M5-M12x1.25

[Features]
・Enables tapped holes which have been damaged to be used again or repaired
・Suitable for use in various materials
・Quick and easy installation
・No other special tools are needed besides the assembly tool

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	3.69 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Stainless Steel-Insert bushings

GANTER

Drive the Stainless Steel-Insert bushings GN 992.5 in by using a soft-head mallet. Their lamellas bridge a production tolerance of the internal diameter or of the internal square of ±0.5 mm, allowing screws to be mounted in tubes.
The dimensions match those of the construction tubes GN 990, but checking the tolerance position of the tube is recommended.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	14.22 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Threaded inserts self-tapping with cutting bores (K0979)

KIPP

[Specifications]
・Version 1: Self-tapping
・Version 2: With cutting bore
・Material: Stainless steel, Steel
・D1=Internal thread: M3-M12

[Features]
・For making high-strength screw connections in materials with low shear strength
・Guarantees secure and firm anchoring in the host material
・Ideal for difficult-to-machine materials
・Version: steel or stainless steel

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	0.51 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Promotional pricing

Recoil-Free (mm) SUS304

Recoil-Free (mm) SUS304【1-3 Pieces Per Package】

RECOIL

Made from regular 304 grade stainless steel (18–8), but inserts made from other application-specific materials are also manufactured.

Volume Discount

Stock

Select to compare

Configure now
Starting from^∗ ：	0.74 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Ensat, Type 308, 3-Hole / Long Size

KKV

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1.12 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Ensat, Ultra Coarse Outside Screw, Type 309

KKV

Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Reinforcing female screws using Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily causes female screws to be destroyed when directly tapped.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.50 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Techlock (SL)

Techlock (SL)【1-5,000 Pieces Per Package】

JAPAN DRIVE-IT

[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard Screw Diameter (after insertion) M (mm): 2 2.5 2.6 3 3.5 4 5 6 8 10 Length (after insertion)
[L](D = Screw Diameter M) 1 D 1.5 D 2 D 2.5 D
[Length]B (mm) 3.0 3.9 4.0 4.9 5.0 5.8

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.23 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Threaded inserts reinforced (K0399)

KIPP

[Specifications]
・Version 1: Reinforced
・Material: Steel, Stainless steel
・Core drill φ(mm): 6.9-31
・D1=Internal thread: M4-M24x2

[Features]
・Stronger cross section for inserts with an increased load
・Enables tapped holes which have been damaged to be used again or repaired
・Suitable for use in various materials
・Quick and easy installation
・No other special tools are needed besides the assembly tool

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	3.69 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Promotional pricing

Ensat Three-Hole / Short 307 Type

KKV

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1.00 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Stainless Steel / Insert Nut Threaded Type (Slotted) / IRU-S

HIROSUGI-KEIKI

[Nominal of Thread (M)] 2.6/3/4/5/6/8
[Material] Free-Cutting Stainless Steel (SUS303)
[Processing] Degreasing

Select to compare

Configure now
Starting from^∗ ：	1.34 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration

Threaded inserts self-tapping with cutting slot (07652)

NORELEM

· For making high-strength screw connections in materials with low shear strength

· Guarantees secure and firm anchoring in the host material

· Ideal for difficult-to-machine materials

· Version: steel or stainless steel

Select to compare

Configure now
Starting from^∗ ：	0.43 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Threaded inserts reinforced (07661)

NORELEM

· Stronger cross section for inserts with an increased load

· Enables tapped holes which have been damaged to be used again or repaired

· Suitable for use in various materials

· Quick and easy installation

· No other special tools are needed besides the assembly tool

Select to compare

Configure now
Starting from^∗ ：	4.43 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Promotional pricing

Brass Insert Nut (Screw-In Type) IRB / IRB-C

HIROSUGI-KEIKI

[Nominal designation of thread (M)] 2/2.5/2.6/3/4/5/6/8
[Material] Free-cutting brass (C3604BD), cadmium content less than 75 ppm
[Treatment] Nickel plating (Ni)/degreasing

Select to compare

Configure now
Starting from^∗ ：	0.64 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Thread Insert (Box)

Thread Insert (Box)【100 Pieces Per Package】

MISUMI

For your own stock or for a large number of uses, buying per box is beneficial.

Stock

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	46.81 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Promotional pricing

Heat Lock (Type HL)

Heat Lock (Type HL)【1-1,000 Pieces Per Package】

JAPAN DRIVE-IT

· Type: Press fit use
· Application: Resin, general
· Material: Brass
· Thread ridge type: Metric coarse screw, without notch
· Shape: Standard
· Diameter (following insertion): M3, M3.5, M4, M5, M6
· Length following insertion (D = screw diameter M): 1.5D, 2D
· Length (mm): 4.0, 5.8, 7.2, 8.2, 9.5, 12.7

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.56 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Promotional pricing

Serrated locking plates, Sintered Steel

GANTER

With the aid of serrated locking plates GN 187.4 standard components can be interlocked and firmly set at a defined angle.
The angular position of the fixing bores in relation to the serrations is not defined in the standard design. The exact positioning is available as special design.
The range of designs makes these plates adapt-able for almost any application in this particular field. To complement these serrated locking plates, accessories such as guide pots GN 187.1 and thrust springs GN 187.2 are useful additional standard parts.

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	8.52 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Threaded insert steel self-tapping type B (K1538)

KIPP

[Specifications]
・Version 1: Self-tapping
・Version 2: with cutting bore
・Material: Steel
・Surface finish body: Galvanised
・D1=Internal thread: M8

[Features]
・Compatible with Bosch profile
・Standard thread M8
・Easy to install

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	1.38 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Threaded inserts (07660)

NORELEM

· Enables tapped holes which have been damaged to be used again or repaired

· Suitable for use in various materials

· Quick and easy installation

· No other special tools are needed besides the assembly tool

Select to compare

Configure now
Starting from^∗ ：	4.43 €
Min. Shipping Days ：	4 Days

*Unit price with basic configuration

Stainless Steel-Serrated locking plates, for welding (GN 188)

GANTER

With the aid of Stainless Steel-Serrated locking plates GN 188, standard components can be interlocked and firmly attached in defined angular increments. They are joined by welding.The toothing is positioned exactly on the alignment holes d4, which guarantees a parallel or right-angled arrangement.The thrust spring is placed between the toothed discs during assembly and ensures that the toothed discs separate properly when loosening. The scope of delivery includes two serrated locking plates, one thrust spring and, depending on the version, a threaded bushing.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	12.36 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Flat Head Sonic Lock (Type SHK)

JAPAN DRIVE-IT

[Type] Press Fit
[Materials] Brass
[Screw type] Metric (coarse) screw, without notch
[Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 3, 4, 5, 6, 8, Length (following insertion)
[L](D = screw diameter M) 1.5D 2D

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	0.37 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Tangless Insert Manual Pre-Winder Tool

ACCURATE

An insertion tool for tangless inserts. This can be used with either a standard type or a lock type.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	475.02 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

ART 88331 AMECOIL-Thread inserts

REYHER

AMECOIL inserts; AMECOIL-inserts; Nuts with fine thread

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1.65 €
Min. Shipping Days ：	3 Days

*Unit price with basic configuration

Taps for Thread Inserts

MISUMI

Volume Discount

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	25.31 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Thread Insert Removal Tool

MISUMI

Volume Discount

Stock

2D / 3D CAD data available

Select to compare

Configure now
Starting from^∗ ：	30.36 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Promotional pricing

Sprue (Unify) (UNF)

Sprue (Unify) (UNF)【1-100 Pieces Per Package】

NIPPON SPREW

Screw reinforcer featuring a coiled, diamond-shaped stainless steel thread. Can achieve high-reliability tightening by effective use of the the springback.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1.09 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

C-Lock (HCL Type)

C-Lock (HCL Type)【10-100 Pieces Per Package】

BOHSEI

Flange shape enables screws to be tightened without damaging plastics. Also prevents plastic burrs from forming when inserts are pressed in.

Select to compare

Configure now
Starting from^∗ ：	4.15 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Insert Phosphor Bronze

RECOIL

Electrical junction joint up to 300 °C. Insert for non-magnetic application (Helisert and sprue).

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	1.18 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Tool for Inserts Machine Processing 620-Type

KKV

A tool for machine processing inserts. Size / internal screw d1 (mm) 2.5 3 3.5 4 5 6 size / internal screw d1 (mm) 2.5 3 3.5 4 5 6

Select to compare

Configure now
Starting from^∗ ：	157.55 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Stainless Steel / Aluminum Insert Nut Threaded Type (Loosening Prevention) / IRU-W

HIROSUGI-KEIKI

[Nominal of Thread (M)] 2.6/3/4/5/6/8
[Material] Free-Cutting Stainless Steel (SUS303)
[Processing] Degreasing

Select to compare

Configure now
Starting from^∗ ：	1.34 €
Min. Shipping Days ：	12 Days

*Unit price with basic configuration


Brand
Product Series
CAD
Starting from^∗
Min. Shipping Days
Specifications
Type
Application
Material
Screw Type
Screw Dia. M (after insertion)(mm)
Thread Dia. (After inserted), Unified(inch)
Length L (after insertion) (D = Thread Dia. M)
Notch
Shape
Sales Unit

	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare
Brand	MISUMI	RECOIL	TOKAI METAL INDUSTRY	MISUMI	TOKAI METAL INDUSTRY	KKV	KIPP	MISUMI	TOKAI METAL INDUSTRY	MISUMI	ACCURATE	HIROSUGI-KEIKI	HIROSUGI-KEIKI	ACCURATE	GANTER	REYHER	KIPP	GANTER	KIPP	RECOIL	KKV	KKV	JAPAN DRIVE-IT	KIPP	KKV	HIROSUGI-KEIKI	NORELEM	NORELEM	HIROSUGI-KEIKI	MISUMI	JAPAN DRIVE-IT	GANTER	KIPP	NORELEM	GANTER	JAPAN DRIVE-IT	ACCURATE	REYHER	MISUMI	MISUMI	NIPPON SPREW	BOHSEI	RECOIL	KKV	HIROSUGI-KEIKI
Product Series	Self-Tapping Inserts / Slotted	Insert Nitronics 60	Dodge Bit Insert (Standard) SB Brass (Cadmium-Free)【1-8,000 Pieces Per Package】	Thread Inserts	Ultrasert UD2 / UD4 (Brass Cadmium-Free)【1-5,000 Pieces Per Package】	Ensat, Slotted Type 302	Threaded inserts self-tapping with cutting slot (K0978)	Tangless Inserts Installation / Removal Tools	Dodge Bit Insert Flange Type (Brass Cadmium-Free)【1-5,000 Pieces Per Package】	Thread Inserts / Tangless	Tangless Insert Insertion Tool	Stainless Steel / Insert Nut Threaded Type / IRU	Brass Bit Insert (Flanged) / HFB	Tangless Insert Metric Coarse Phosphor Bronze	Serrated locking plates, Stainless Steel	DIN 7965 Screwed inserts	Threaded Inserts (K0398)	Stainless Steel-Insert bushings	Threaded inserts self-tapping with cutting bores (K0979)	Recoil-Free (mm) SUS304【1-3 Pieces Per Package】	Ensat, Type 308, 3-Hole / Long Size	Ensat, Ultra Coarse Outside Screw, Type 309	Techlock (SL)【1-5,000 Pieces Per Package】	Threaded inserts reinforced (K0399)	Ensat Three-Hole / Short 307 Type	Stainless Steel / Insert Nut Threaded Type (Slotted) / IRU-S	Threaded inserts self-tapping with cutting slot (07652)	Threaded inserts reinforced (07661)	Brass Insert Nut (Screw-In Type) IRB / IRB-C	Thread Insert (Box)【100 Pieces Per Package】	Heat Lock (Type HL)【1-1,000 Pieces Per Package】	Serrated locking plates, Sintered Steel	Threaded insert steel self-tapping type B (K1538)	Threaded inserts (07660)	Stainless Steel-Serrated locking plates, for welding (GN 188)	Flat Head Sonic Lock (Type SHK)	Tangless Insert Manual Pre-Winder Tool	ART 88331 AMECOIL-Thread inserts	Taps for Thread Inserts	Thread Insert Removal Tool	Sprue (Unify) (UNF)【1-100 Pieces Per Package】	C-Lock (HCL Type)【10-100 Pieces Per Package】	Insert Phosphor Bronze	Tool for Inserts Machine Processing 620-Type	Stainless Steel / Aluminum Insert Nut Threaded Type (Loosening Prevention) / IRU-W
CAD	2D / 3D			2D / 3D			2D / 3D	2D / 3D		2D / 3D					2D / 3D		2D / 3D	2D / 3D	2D / 3D					2D / 3D						2D / 3D		2D / 3D	2D / 3D						2D / 3D	2D / 3D
Starting from^∗	1.24 € *Unit price with basic configuration Volume Discount	2.80 € *Unit price with basic configuration Volume Discount	0.16 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	1.03 € *Unit price with basic configuration Volume Discount	0.24 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.47 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.36 € *Unit price with basic configuration	164.48 € *Unit price with basic configuration Volume Discount	0.29 € *Unit price with basic configuration Volume Discount	1.90 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	116.01 € *Unit price with basic configuration	0.98 € *Unit price with basic configuration	0.42 € *Unit price with basic configuration	0.64 € *Unit price with basic configuration Volume Discount	11.38 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.36 € *Unit price with basic configuration Volume Discount	3.69 € *Unit price with basic configuration	14.22 € *Unit price with basic configuration Volume Discount	0.51 € *Unit price with basic configuration	0.74 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	1.12 € *Unit price with basic configuration Volume Discount	0.50 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	0.23 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	3.69 € *Unit price with basic configuration	1.00 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	1.34 € *Unit price with basic configuration	0.43 € *Unit price with basic configuration	4.43 € *Unit price with basic configuration	0.64 € Special price *Unit price with basic configuration Promotional pricing	46.81 € *Unit price with basic configuration	0.56 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	8.52 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	1.38 € *Unit price with basic configuration	4.43 € *Unit price with basic configuration	12.36 € *Unit price with basic configuration Volume Discount	0.37 € *Unit price with basic configuration Volume Discount	475.02 € *Unit price with basic configuration Volume Discount	1.65 € *Unit price with basic configuration Volume Discount	25.31 € *Unit price with basic configuration Volume Discount	30.36 € *Unit price with basic configuration Volume Discount	1.09 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	4.15 € *Unit price with basic configuration	1.18 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	157.55 € *Unit price with basic configuration	1.34 € *Unit price with basic configuration
Min. Shipping Days	Same day	Same day	Same day	Same day	Same day	Same day	4 Days	5 Days	Same day	Same day	Same day	12 Days	5 Days	9 Days	Same day	2 Days	4 Days	7 Days	4 Days	Same day	Same day	Same day	Same day	4 Days	6 Days	12 Days	4 Days	4 Days	Same day	5 Days	Same day	Same day	4 Days	4 Days	7 Days	6 Days	5 Days	3 Days	5 Days	5 Days	Same day	6 Days	Same day	6 Days	12 Days
Specifications						Stock		Stock	Stock											Stock										Stock										Stock
Type	Self-Tapping	Standard	Standard	Standard	Standard	Self-Tapping	-	Tool	Standard	Tangless	Tool	Self-Tapping	Press Fit	Tangless	-	-	-	-	-	Standard	Self-Tapping	Self-Tapping	Press Fit	-	Self-Tapping	Self-Tapping	Standard	Standard	Self-Tapping	Standard	Press Fit	-	-	Standard	-	Press Fit	Tool	-	Tool	Tool	Standard	Press Fit	Standard	Tool	Self-Tapping
Application	Light Metal	Light Metal	Resin General	Light Metal	Resin General	-	-	-	Resin General	Light Metal	-	Cast Iron	Light Metal	Light Metal / Cast Iron / Resin General	-	-	-	-	-	Light Metal	-	-	-	-	-	Cast Iron	-	-	Light Metal	Light Metal	Resin General	-	-	-	-	-	-	-	-	-	Light Metal	Resin General	Light Metal	-	Cast Iron
Material	Steel / Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Nitrox 60	Brass	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Brass	Steel / Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) / Stainless Steel (EN 1.4016 Equiv.) / Brass	Steel / Stainless steel	-	Brass	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Brass	Phosphor Bronze	Stainless Steel	Steel / Brass	Steel / Stainless steel	-	Steel / Stainless steel	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Steel / Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) / Stainless Steel (EN 1.4016 Equiv.)	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) / Brass	Brass	Steel / Stainless steel	Steel / Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.) / Stainless Steel (EN 1.4016 Equiv.)	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Steel / Stainless steel	Steel / Stainless steel	Brass	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Brass	Steel	Steel	Steel / Stainless steel	Stainless Steel	Brass	-	-	-	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)	Brass	Phosphor Bronze	-	Stainless (EN 1.4305 Equiv. / EN 1.4301 Equiv.)
Screw Type	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread / Metric (Fine) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	-	-	Metric (Coarse) Thread	Metric (Coarse) Thread	-	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	-	-	-	-	-	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	-	Metric (Coarse) Thread	Metric (Coarse) Thread	-	-	Metric (Coarse) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	-	-	-	-	Metric (Coarse) Thread	-	-	-	-	Unified (Fine) Thread	Metric (Coarse) Thread	Metric (Coarse) Thread	-	Metric (Coarse) Thread
Screw Dia. M (after insertion)(mm)	3 ～ 12	3 ～ 12	1.6 ～ 8	3 ～ 16	2 ～ 10	2.5 ～ 30	-	-	2 ～ 8	2.5 ～ 10	-	2 ～ 8	2 ～ 5	3 ～ 6	-	3 ～ 12	-	M 8 ～ M 16	-	2 ～ 42	3 ～ 16	3 ～ 16	2 ～ 10	-	3 ～ 16	2.6 ～ 8	3 ～ 16	4 ～ 24x2	2 ～ 8	3 ～ 8	3 ～ 6	-	-	5 ～ 12x1.25	-	2 ～ 8	-	-	-	-	-	3 ～ 6	3 ～ 24	2.5 ～ 30	2.6 ～ 8
Thread Dia. (After inserted), Unified(inch)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	1/2-20 ～ #10-32	-	-	-	-
Length L (after insertion) (D = Thread Dia. M)	-	1D / 1.5D / 2D	1D / 1.5D / 2D / 2.5D / 3D	1D / 1.5D / 2D / 3D	1D / 1.5D / 2D	-	-	-	1D / 1.5D / 2D / 2.5D / 3D	1D / 1.5D / 2D	-	1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3.5D	1D / 1.5D / 2D / 2.5D / 3D	1D / 1.5D / 2D	-	-	-	-	-	1D / 1.5D / 2D / 2.5D / 3D	-	-	1D / 1.5D / 2D / 2.5D	-	-	1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D	-	-	1D / 1.5D / 2D / 2.5D / 3D / 0.7D / 0.8D / 3.5D	1D / 1.5D / 2D	1.5D / 2D	-	-	-	-	1.5D / 2D	-	-	-	-	1D / 1.5D / 2D / 3D	-	1D / 1.5D / 2D	-	1D / 1.5D / 2D / 2.5D / 3D / 0.8D / 3.5D
Notch	Not Provided	Provided	Not Provided	Provided	Not Provided	-	-	-	Not Provided	Not Provided	-	Not Provided	Not Provided	-	-	-	-	-	-	Provided	-	-	Not Provided	-	-	Not Provided	-	-	Not Provided	Provided	Not Provided	-	-	-	-	Not Provided	-	-	-	-	Provided	-	Provided	-	Not Provided
Shape	Slotted	-	Standard	-	Standard	Slotted	-	-	Standard	-	-	Standard	Standard	-	-	-	-	-	-	-	3-Hole Type	Standard	Standard	-	3-Hole Type	Slotted	-	-	Standard	-	Standard	-	-	-	-	Standard	-	-	-	-	-	Standard	-	-	Standard
Sales Unit	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.)	-	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.)	-	Box, Pkg.	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	-	-	-	-	-	-	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	-	Low Quantity (Available beginning with 1 pc.)	Box, Pkg.	-	-	Box, Pkg.	Box, Pkg.	-	-	-	-	-	Low Quantity (Available beginning with 1 pc.)	-	-	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	-	Low Quantity (Available beginning with 1 pc.)	-	Box, Pkg.