Rod End Bearings, Spherical Bearings（Connection screw direction：Right Screw）

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

• • Recommendation

  

  Link Ball, Male Threaded Holder, BL

  THK

  The holder is perpendicular to the ball shank.
  With grease pockets on the top and bottom of the spherical area, this model has high lubricity and high wear resistance.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.37 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Rod End Bearings / Standard

  MISUMI

  [Material] Main body EN 1.1181 Equiv.; Connection thread form: you can choose male or female thread.

  • Volume Discount

  • Order quantities extended (D-JIT)
  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.68 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Ball joint heads with threaded bolt, Stainless Steel

  GANTER

  Stainless Steel-Ball joint heads GN 648.6 are similar to DIN ISO 12240-4, series K (formerly DIN 648 K).
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	30.38 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rod End Bearings - Stainless Steel, Oil-Free

  MISUMI

  * Those will be the successor to PHSS/PHSOS.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	31.44 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  GN 648.2 Ball joint heads with threaded bolt

  GANTER

  Ball joint heads GN 648.2 are similar to DIN ISO 12240-4, series K (formerly DIN 648 K).
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.26 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Ball joint heads with female thread

  GANTER

  Ball joint heads GN 648.1 are similar to DIN ISO 12240-4, series K (formerly DIN 648 K).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.78 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Ball joint heads with female thread, Stainless Steel

  GANTER

  Stainless Steel-Ball joint heads GN 648.5 are similar to DIN ISO 12240-4, series K (formerly DIN 648 K).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	30.38 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Rod End, Female Threaded Type PHS Type

  THK

  Highly rigid with superior abrasion and corrosion resistance.
  The correct amount of lubricant can be supplied to the sliding surface via the grease nipple attached to the holder.
  
  [Features]
  · Lubrication: Lubricate before use. There is a lubrication hole and oil groove on the holder, so it can be lubricated via the grease nipple.
  · Left-hand female thread identification: For left-hand female threads, the letter "L" is added. "L" is marked on the holder of the product.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.67 €
  	Special price
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Joint Bearing

  SKF

  [Specifications]
  ・I.D. D(mm): 4~220
  ・Outer diameter(mm): 12~320
  ・Width(mm): 5~135

  Select to compare

  Configure now
  Starting from∗ ：	146.72 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Angled ball joints with rivet ball shank

  GANTER

  Angled ball joints DIN 71802 consist of a ball socket DIN 71805 and a ball shank DIN 71803.
  The angle of rotation for the type with safety catch (Types CS, BS) ist 15°, without safety catch (Types C, B) is 18°.
  For assembly the ball ist pushed through the circlip which acts as a retainer. Should the retaining force (see pull-off force in the table above) between ball and socket not be sufficient, this can be increased by adding a safety catch, which can easily be fitted.
  To protect the angled ball point, a dust cap GN 710 can be added.
  The hexagon nut is part of the angled ball joints.
  Dust caps GN 710 have to be ordered seperately.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.30 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Joint Head

  SKF

  [Specifications]
  ・I.D. D(mm): 3~100
  ・Outer diameter(mm): 12~230
  ・Width(mm): 6~100

  Select to compare

  Configure now
  Starting from∗ ：	22.52 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Rod End Bearings / 90 Deg. Link Ball Type

  MISUMI

  [Material] Holder: High strength zinc alloy, Shaft with ball: EN 1.1181 Equiv. (20 to 28HRC), Boot: NBR type special synthetic rubber "Hardness" Spherical part: 650HV or more.

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.05 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Rod End, Male Threaded Type POS

  THK

  This model is a highly rigid rod end that is basically the same as the female threaded model PHS, but has a male thread on the holder end.
  * The rod end shown in the photo is a representative product.
  Thread sizes M5 and M6 do not come with a nipple. Lubricate the bearing directly.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.44 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rod End Bearings / Link Ball with Thread

  MISUMI

  [Material] Retainer: High strength zinc alloy, stem with ball: EN 1.1181 equiv. (20 to 28HRC), boot: NBR type special synthetic rubber "Hardness" Ball part: 650HV or more

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.44 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Link Ball, Male Threaded Holder, RBI

  THK

  The mounting bolt and holder are arranged on the same axis, allowing this model to bear an axial load.
  The boot contains grease, providing high lubricity and high abrasion resistance.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.92 €
  	Special price
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Rod End, Male Thread Type POS Series

  OZAK

  (Features)
  Using a high precision steel bearing as the inner ring, a special copper alloy ring is inserted into the carbon steel holder structure or outer ring, providing smooth and wear-resistant self alignment, rotation and oscillating movement.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.18 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Rod End, Male Threaded Type (Oil Free) NOS-T

  THK

  This model is an oil free type rod end that is basically the same as the female threaded model NHS-T, but has a male thread on the holder end.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.94 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  L-Ball

  IKO

  [Features]
  · Grease filled part.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.03 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  DIN 71802 Ball joint

  REYHER

  [Specifications]
  ・Main Body Material: Steel
  ・Connection screw M: M5-M14
  ・Standard: DIN 71802
  
  [Features]
  ・Angle joints (ball joints) with threaded shank, hexagon nuts and circlips

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.14 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Rod End Bearing, Standard Type, Male Thread (Copper Alloy) [PTLOS]

  STRUENING

  MISUMI-VONA provides carefully chosen products from fast-growing Asian manufacturers to meet our customers' needs. Select a product to suit your applications. A Taiwanese manufacturer established in 1989. Obtained ISO9001: 2000 certification in 2006 and continues to implement world-class quality standards. Sells products to companies all over the world and has a high share of the Asian, European, and North American markets. MISUMI-VONA supplies rod end bearings.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.16 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  TRUSCO Rod End, Oil Free Type, Male Thread【1-2 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · An oil free type rod end with a self-lubricating plastic liner bonded to the surface of the raceway for the ball.
  
  [Applications]
  · Various transport machinery parts
  · Various manufacturing machinery parts
  · FA equipment.
  ·
  Packaging machinery parts·
  Textile machinery parts·
  Agricultural machinery parts· Robot parts.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	17.54 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Angled ball joints

  GANTER

  Angled ball joints DIN 71802 consist of a ball socket DIN 71805 and a ball shank DIN 71803.
  The angle of rotation for the type with safety catch (Types CS, BS) ist 15°, without safety catch (Types C, B) is 18°.
  For assembly the ball ist pushed through the circlip which acts as a retainer. Should the retaining force (see pull-off force in the table above) between ball and socket not be sufficient, this can be increased by adding a safety catch, which can easily be fitted.
  To protect the angled ball point, a dust cap GN 710 can be added.
  The hexagon nut is part of the angled ball joints.
  Dust caps GN 710 have to be ordered seperately.
  

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.28 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel- Angled ball joints

  GANTER

  Stainless Steel-Angled ball joints DIN 71802 consist of a ball socket DIN 71805 and a ball shank DIN 71803.
  The angle of rotation for the type with safety catch (Type CSN) is 15°, without safety catch (Type CN) is 18°.
  For assembly the ball ist pushed through the circlip which acts as a retainer. Should the retaining force (see pull-off force in the table above) between ball and socket not be sufficient, this can be increased by adding a safety catch, which can easily be fitted.
  To protect the angled ball point, a dust cap GN 710 can be added.
  The hexagon nut is part of the angled ball joints.
  Dust caps GN 710 have to be ordered seperately.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	16.26 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rod End Bearing, Right Male Thread, Fluoropolymer Type 3 Piece HRT-E

  MINEBEA

  Comprised of a spherical bearing placed into the rod end body. The main body material is chrome molybdenum steel which has a hardness of HRC35 and tensile strength of 980N/mm2 or more. The 3-piece rod end is widely used in places with extreme performance requirements. The spherical race material can be selected to suit the application.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	43.42 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Pillow Ball

  IKO

  [Features]
  · Contains an oil groove and one oil hole on the outer ring.
  · Does not contain grease.
  · Use with sufficient lubrication.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.02 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Spherical Bearing SRJ

  HEATH & HEATHER

  · The movable part has less frictional resistance due to its rolling joint structure under preload, achieving high precision with zero clearance.
  · Higher rigidity and smaller size than other joints combining roller bearings with 3 degrees of freedom.
  · Ideal for achieving high precision, high rigidity and downsizing of parallel mechanism.
  · Achieved using HEPHAIST's ultra-precision spherical inner surface machining technology.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	314.22 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  None Open Bearing Rod ends E Series / Male thread, Female thread

  SKF

  [Specifications]
  ・Thread type: Male thread, Female thread
  ・Seal: None open bearing
  
  None Open Bearing Rod ends E Series

  Select to compare

  Configure now
  Starting from∗ ：	38.15 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  TRUSCO Rod End, Oil Free Type, Female Thread【1-2 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · An oil free type rod end with a self-lubricating plastic liner bonded to the surface of the raceway for the ball.
  
  [Applications]
  · Various transport machinery parts
  · Various manufacturing machinery parts
  · FA equipment.
  ·
  Packaging machinery parts·
  Textile machinery parts·
  Agricultural machinery parts· Robot parts.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	17.54 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  TRUSCO Rod End, Lubricated Type, Male Thread【1-2 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Excellent abrasion and corrosion resistance with superior rigidity
  · Lubricant can be supplied to the sliding surface via a grease nipple on the body.
  
  [Applications]
  · Various transport machinery parts
  · Various manufacturing machinery parts
  · FA equipment.
  ·
  Packaging machinery parts·
  Textile machinery parts·
  Agricultural machinery parts· Robot parts.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	17.96 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rod End Bearing, Right Male Thread, Fluoropolymer Type 2 Piece RBT-E

  MINEBEA

  The rod end requires no lubrication, and is made of stainless steel (303 for the body, 440C for the ball),
  giving it excellent anti-corrosion characteristics so it can be used in a wide range of general purpose applications.
  
  [Features]
  · The fluoropolymer liner is bonded to the inner diameter of the body.
  · The moving load should be kept within the rated static load since the load performance of the fluoropolymer liner is larger than the static fracture load of the body.
  · If exposed to shock and vibration, damage is possible even if the load is kept under the rated load. Internal diameter sizes 15 mm and above are built-to-order.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	18.77 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Rod End Bearing, Standard Type, Oil Free Type, Male Thread (Fluoropolymer PTFE) - [NTLOS]

  STRUENING

  MISUMI-VONA provides carefully chosen products from fast-growing Asian manufacturers to meet our customers' needs. Select a product to suit your applications. A Taiwanese manufacturer established in 1989. Obtained ISO9001: 2000 certification in 2006 and continues to implement world-class quality standards. Sells products to companies all over the world and has a high share of the Asian, European, and North American markets. MISUMI-VONA supplies rod end bearings.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.37 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Rod End, Female Thread Type PHS Series

  OZAK

  (Features)
  Using a high precision steel bearing as the inner ring, a special copper alloy ring is inserted into the carbon steel holder structure or outer ring, providing smooth and wear-resistant self alignment, rotation and oscillating movement.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	13.04 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rod ends PB Series

  ELGES

  Select to compare

  Configure now
  Min. Shipping Days ：	Quote

• 

  Rod ends PW Series

  ELGES

  Select to compare

  Configure now
  Min. Shipping Days ：	Quote

• 

  None Open Bearing Rod ends ES Series / Male thread, Female thread, Welding end

  SKF

  [Specifications]
  ・Seal: None open bearing
  ・Thread type: Male thread, Female thread, Welding end

  Select to compare

  Configure now
  Starting from∗ ：	49.10 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  ELGES Rod End Bearings, Spherical Bearings / Male thread, Female thread, Welding end, Threaded clamping device

  ELGES

  [Specifications]
  ・I.D. D(mm): 15~110
  ・Connection screw direction: Right Screw, Left Screw
  ・Outer diameter(mm): 30~180
  ・Width(mm): 14~115
  ・Thread type: Male thread, Female thread, Welding end, Threaded clamping device

  Select to compare

  Configure now
  Min. Shipping Days ：	Quote

• 

  ELGES Rod ends DO Series / Female thread, Threaded clamping device

  ELGES

  [Specifications]
  ・Thread type: Female thread, Threaded clamping device
  ・Seal: None open bearing

  Select to compare

  Configure now
  Min. Shipping Days ：	Quote

• 

  ELGES Rod End Requiring Maintenance with External Thread, Dimension Series K, Open

  ELGES

  Select to compare

  Configure now
  Starting from∗ ：	28.05 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Rod End, Female Threaded Type (Oil Free) NHS-T Type

  THK

  An oil free type rod end that uses self-lubricating synthetic plastic formed between the steel holder and the spherical inner ring.
  The gap on the sliding surface is minimized, allowing accurate link motion to be achieved.
  
  [Features]
  · NHS-T Type (oil free type)

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.92 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rod End Bearing, Right Female Thread, Fluoropolymer Type 3 Piece HRT

  MINEBEA

  Comprised of a spherical bearing placed into the rod end body. The main body material is chrome molybdenum steel which has a hardness of HRC35 and tensile strength of 980N/mm2 or more. The 3-piece rod end is widely used in places with extreme performance requirements. The spherical race material can be selected to suit the application.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	55.01 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Rod End Bearing, Standard Type, Female Thread (Copper Alloy) [PTLHS]

  STRUENING

  A standard female threaded type rod end bearing. SB is a Taiwanese manufacturer that was established in 1989. Obtained ISO9001: 2000 certification in 2006 and continues to implement world-class quality standards. Sells products to companies all over the world and has a high share of the Asian, European, and North American markets. MISUMI-VONA supplies rod end bearings.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.58 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Rod End Bearing, Standard Type, Oil Free Type, Female Thread (Fluoropolymer PTFE) - [NTLHS]

  STRUENING

  A standard oil free female threaded type rod end bearing. SB is a Taiwanese manufacturer that was established in 1989. Obtained ISO9001: 2000 certification in 2006 and continues to implement world-class quality standards. Sells products to companies all over the world and has a high share of the Asian, European, and North American markets. MISUMI-VONA supplies rod end bearings.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.84 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  TRUSCO Rod End, Lubricated Type, Female Thread【1-2 Pieces Per Package】

  TRUSCO NAKAYAMA

  [Features]
  · Excellent abrasion and corrosion resistance with superior rigidity
  · Lubricant can be supplied to the sliding surface via a grease nipple on the body.
  
  [Applications]
  · Various transport machinery parts
  · Various manufacturing machinery parts
  · FA equipment.
  ·
  Packaging machinery parts·
  Textile machinery parts·
  Agricultural machinery parts· Robot parts.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	16.26 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rod ends C Series

  SKF

  Select to compare

  Configure now
  Starting from∗ ：	52.73 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Rod ends ES2RS Series

  SKF

  Select to compare

  Configure now
  Starting from∗ ：	146.72 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

Loading...