Tubes（Operating Environment：Antistatic）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Junflon Tube (Fluoride Polymer Tube), Junflon FEP Tube (Fluoride Polymer Tube)
JUNKOSHA
[Features]
· Product has superior low-temperature and heat-resistance properties.
· Non-load continuous operating temperature PFA < -65°C to +260°C, FEP < -65°C to +200°C.
· Inactive to most chemicals and solvents.
· Product has superior weather-resistance properties and does not deteriorate over time.
· Most substances are unlikely to adhere, and easy to remove if they do.
· Flame retardant.
· Superior electrical characteristics.
· No risk of poisonous substances being released.Configure nowMin. Shipping Days ： 10 Days -
Tubes / Antistatic Type
MISUMI
[Features] Hose suitable for piping in environments where static electricity should be avoided.- Volume Discount
- 2D / 3D CAD data available
Configure nowMin. Shipping Days ： 5 Days -
The Anti-Static Straight Anti-Static Tube
NIHON PISCO
A tube using a static dissipative resin.- Volume Discount
Configure nowStarting from∗ ： 21.88 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
- Promotional pricing
TOMBO No. 9003 Nylon PTFE Tube
NICHIAS
Fluororesin (PTFE) tube. Excellent chemical resistance, heat resistance, and weatherproof performance.
[Features]
· Chemical permeation is minimal (reduced to approximately 60% of PFA-HG (measured with hydrochloric acid, nitrogen, and oxygen)).
· The amount of permeation for a PFA-HG tube is reduced to approximately 50% that of a standard PFA tube (HCl comparison).
· Elution of fluorine ions is minimal (equivalent to a PFA-HG tube).
· The inner surface of the tube is smooth (Equivalent to a PFA-HG tube).- Volume Discount
Configure nowStarting from∗ ： 43.29 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
TOMBO No. 9003-BT, Naflon BT Tube
NICHIAS
Tube with superior flexibility and transparency which employs a single type of fluorine resin. Suitable for use for piping in narrow spaces.
[Features]
· Bends easily and thus is not prone to buckling even when the turning radius is tight.
· More transparent than normal PTFE tubes.Configure nowStarting from∗ ： 133.74 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Touch Tube, TE-EP Antistatic Polyurethane Tube
CHIYODA TSUSHO
Prevents build-up of static electricity and dust adhesion.Configure nowStarting from∗ ： 17.26 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
- Promotional pricing
Junflon Tube (Fluoride Polymer Tube), Junflon FT (PFA Fluoride Polymer Coil Tube)
JUNKOSHA
[Features]
·A fitting with a superior heat/low-temperature resistance.
· Non-load continuous operating temperatures: PFA < -65–260℃/FEP < -65–200℃.
· Inert to most of chemicals and solvents.
· This fitting has superior weather resistance and resistance to ageing.
· Adhesion-resistant and easy to keep clear.
· Flame retardant.
· Superior electrical characteristics.
· No risk of toxic substance elution.- Volume Discount
Configure nowStarting from∗ ： 51.00 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
UP-94 Series for Air Fiber One-Touch Fitting
CKD
[Features]
· Ultra-fine type with φ1.8 outer diameter and φ1.2 inner diameter.- Volume Discount
Configure nowStarting from∗ ： 51.65 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
UP-9102-F1 Series for Air Fiber Dedicated Fitting
CKD
An ultra-fine tube with an outer diameter of φ1.8 and minimum bending radius of 4mm.- Volume Discount
Configure nowStarting from∗ ： 120.45 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Type |
| Cutting Service Usage |
| Outer Diameter D(Ø) |
| O.D. [Distinction] |
| Inner Diameter d(Ø) |
| Material |
| I.D. [Distinction] |
| Applicable Fluid |
| Operating Environment |
| Color |
| Number of Bores(Core) |
| Material, Urethane |
| Material, Fluororesin |
| Material: Nylon |
| Outer Diameter (2nd Core) |
| Outer Diameter (3rd Core) |
| Outer Diameter (4th Core) |
| Outer Diameter (5th Core) |
| Inner Diameter (2nd Core) |
| Inner Diameter (3rd Core) |
| Inner Diameter (4th Core) |
| Inner Diameter (5th Core) |
| Type of Related Component |
|
|
|
|
|
|
|
|
| |
| Brand | JUNKOSHA | MISUMI | NIHON PISCO | NICHIAS | NICHIAS | CHIYODA TSUSHO | JUNKOSHA | CKD | CKD |
| Product Series | Junflon Tube (Fluoride Polymer Tube), Junflon FEP Tube (Fluoride Polymer Tube) | Junflon Tube (Fluoride Polymer Tube), Junflon FT (PFA Fluoride Polymer Coil Tube) | |||||||
| CAD |
| ||||||||
| Starting from∗ | - | - Volume Discount | 21.88 € *Unit price with basic configuration Volume Discount | 43.29 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 133.74 € *Unit price with basic configuration | 17.26 € *Unit price with basic configuration | 51.00 € Special price *Unit price with basic configuration Promotional pricingVolume Discount | 51.65 € *Unit price with basic configuration Volume Discount | 120.45 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | 10 Days | 5 Days | 5 Days | Same day | 8 Days | 10 Days | Same day | 6 Days | 6 Days |
| Type | Straight | Straight | Straight | Straight | Straight | Straight | Coil | Straight | Straight |
| Cutting Service Usage | Not Provided | Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Outer Diameter D(Ø) | 6 | 4 ～ 12 | 3 ～ 12 | 1.7 ～ 14 | 3.17 ～ 12.7 | 4 ～ 12 | 4 ～ 10 | 1.8 | 1.8 |
| O.D. [Distinction] | Up to 6 | - | Up to 3 ～ Up to 15 | Up to 2 ～ Up to 15 | Up to 4 ～ Up to 15 | Up to 4 ～ Up to 15 | Up to 4 ～ Up to 10 | Up to 2 | Up to 2 |
| Inner Diameter d(Ø) | 4 | 2.5 ～ 8 | 2 ～ 8 | 0.7 ～ 12.5 | 1.59 ～ 9.52 | 2.5 ～ 8 | 2 ～ 8 | 1.2 | 1 |
| Material | Fluororesin | Urethane | Urethane | Fluororesin | Fluororesin | Urethane | Fluororesin | Urethane | Urethane |
| I.D. [Distinction] | Up to 4 | - | Up to 2 ～ Up to 8 | 1 or Less ～ Up to 15 | Up to 2 ～ Up to 10 | Up to 3 ～ Up to 8 | Up to 2 ～ Up to 8 | Up to 2 | 1 or Less |
| Applicable Fluid | Water / Air / Chemical / General Hydraulic Oil | Air | Air | Water / Air / Chemical | Water / Air | Air | Water / Air / Chemical / General Hydraulic Oil | Air | Air |
| Operating Environment | Antistatic | Antistatic | Antistatic | Antistatic | Antistatic | Antistatic | Antistatic | Antistatic | Antistatic |
| Color | Others | Black | Black | Transparent (including non-white colors) | Transparent (including non-white colors) | Black | Others | Black / White | Black / White / Transparent (including non-white colors) / Red |
| Number of Bores(Core) | - | - | 1 | 1 | 1 | - | - | 1 | 1 |
| Material, Urethane | - | Conductive, Antistatic Urethane | Conductive, Antistatic Urethane | - | - | Conductive, Antistatic Urethane | - | Conductive, Antistatic Urethane | Conductive, Antistatic Urethane |
| Material, Fluororesin | Others | - | - | Standard Fluororesin | Soft Fluororesin | - | Others | - | - |
| Material: Nylon | - | - | - | - | - | - | - | - | - |
| Outer Diameter (2nd Core) | - | - | - | - | - | - | - | - | - |
| Outer Diameter (3rd Core) | - | - | - | - | - | - | - | - | - |
| Outer Diameter (4th Core) | - | - | - | - | - | - | - | - | - |
| Outer Diameter (5th Core) | - | - | - | - | - | - | - | - | - |
| Inner Diameter (2nd Core) | - | - | - | - | - | - | - | - | - |
| Inner Diameter (3rd Core) | - | - | - | - | - | - | - | - | - |
| Inner Diameter (4th Core) | - | - | - | - | - | - | - | - | - |
| Inner Diameter (5th Core) | - | - | - | - | - | - | - | - | - |
| Type of Related Component | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Type
-
Cutting Service Usage
- Provided
- Not Provided
-
Outer Diameter D(Ø)
-
O.D. [Distinction]
- Up to 2
- Up to 3
- Up to 4
- Up to 5
- Up to 6
- Up to 7
- Up to 8
- Up to 9
- Up to 10
- Up to 15
- Up to 20
- Up to 30
- Up to 40
* ~2 represents over 5, and 3 or less.
-
Inner Diameter d(Ø)
-
Material
- Urethane
- Nylon
- Fluororesin
- Polyamide
- Fluororubber
- Silicone Rubber
- Polyolefin Resin
- Others
- Nylon/Fluoropolymer
-
I.D. [Distinction]
- 1 or Less
- Up to 2
- Up to 3
- Up to 4
- Up to 5
- Up to 6
- Up to 7
- Up to 8
- Up to 9
- Up to 10
- Up to 15
- Up to 20
- Up to 30
* ~2 represents over 5, and 3 or less.
-
Applicable Fluid
- Water
- Air
- Chemical
- General Hydraulic Oil
- Thermal Media Oil
-
Operating Environment
- Standard
- Clean Environment
- Corrosion Resistant
- Antistatic
- Sputter Resistant
- Mold Cooling
- Water Resistance
- Pressure Resistance
- For Vacuum
- Heat Resistance
- Abrasion Resistance
- Oil Resistance
- Low Temp. Resistance
- Weather Resistance
- Ozone Resistance
- Sulfur Resistance
- Chemical Resistance
-
Color
- Black
- White
- Milky White
- Transparent (including non-white colors)
- Red
- Blue
- Yellow
- Green
- Orange
- Ocher
- Gray
- Multi Color
- Others
- Purple
-
Number of Bores(Core)
-
Material, Urethane
-
Material, Fluororesin
-
Material: Nylon
-
Outer Diameter (2nd Core)
-
Outer Diameter (3rd Core)
-
Outer Diameter (4th Core)
-
Outer Diameter (5th Core)
-
Inner Diameter (2nd Core)
-
Inner Diameter (3rd Core)
-
Inner Diameter (4th Core)
-
Inner Diameter (5th Core)
-
Type of Related Component
Brand
-
- CKD (2)
- JUNKOSHA (2)
- NICHIAS (2)
- CHIYODA TSUSHO (1)
- NIHON PISCO (1)
- NITTA (0)
- CHUKOH CHEMICAL INDUSTRIES (0)
- MIRUC OPTICAL (0)
- YODOGAWA HU-TECH (0)
- IFIELD (0)
- TAIYO (0)
- KOKUGO (0)
- PREVOST (0)
- TRUSCO NAKAYAMA (0)
- FESTO (0)
- AOI (0)
- ESCO (0)
- CHELIC (0)
- IWATA MFG (0)
- NORGREN (0)
- SMC (0)
- NORELEM (0)
- KIPP (0)
- MUROMOTO TEKKO (0)
CAD data type
-
- 2D
- 3D
Examples how you can use these components
Categories related to Tubes
-
- Cylinders, Rotary Actuators
- Cylinder Connecting Components
- Filters, Regulators, Lubricators
- Solenoid Valves
- Electromagnetic Valves
- Pneumatic Pipe Fittings
- Speed Controllers
- Silencers
- Manual-Type Valves, Mechanical-Type Valves
- Tubes
- Fluororesin Products for Chemicals
- Pressure, Flow Rate Sensors
- Dryers
- Compressors, Blowers
- Other Pneumatic Devices
-
Metody płatności
Faktura
Przedpłata
Produkcja na zamówienie
Certyfikaty
Copyright © MISUMI Corporation All Rights Reserved.