Air Cylinders（Additional Function：Standard Page 2）

?* Information on days to ship and prices

• 

  Compact Guide Cylinder JMGP Series

  SMC

  [Features]
  · Compact with overall length reduced by 30.5 mm and height by 16 mm.
  · Weight is reduced by up to 69% (0.32 kg → 0.1 kg).
  · Can be mounted from 3 directions
    Top mounting, bottom mounting, base mounting.
  · Piping is possible from 4 directions.
  · Suitable for pushing, lifting and clamping on a transport line.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	149.60 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Air Cylinders / Panel Mount / Single Acting

  MISUMI

  [Features] This is a very compact air cylinder. It can be mounted on a plate.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	19.15 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  MQQ, Compact Cylinder, Metal Seal, Low Friction

  SMC

  A compact low-friction cylinder suitable for low pressures, low speeds, uniform speeds and low friction actuation.
  [Features]
  · Covers a range of actuation speeds and output controls thanks to its metal seal structure with minimal sliding resistance.
  · Its minimal sliding resistance allows for low-pressure actuation at 0.005 MPa.
  · Smooth and uniform-speed actuation ranges as low as 0.3 mm/s.
  · Long lifespan: Long service life of 10,000 km or 100 million full cycles.
  · Lateral load resistance: Features built-in ball bushings in the bearings for improved lateral load resistance. (MQQL)
  · Its low sliding resistance allows output control in approximately 0.05‑N increments. (Based on cylinder piston area × pressure accuracy)
  · No change to sliding resistance, even after extended periods of non-use.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	227.92 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  MLGC Series Compact External Guide Cylinder With Fine Lock

  SMC

  MLGC Series Compact External Guide Cylinder With Fine Lock has a built-in fine locking mechanism.
  [Features]
  · Can be locked in both directions.
  · Maximum piston speed: 500 mm/s.
  · Air cushion equipped as standard.
  · Can detect the operating position.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	198.53 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  Air Cylinder With End Lock, CBM2 Series

  SMC

  An air cylinder manufactured by SMC
  [Features]
  Female rod end available as standard
  · Rod-end type can be selected to fit the application
  · Easy fine adjustment of auto switch position
  · Transparent switch bracket improves visibility of indicator LED
  · Single clevis and trunnion pivot brackets are available
  · Holds the cylinder's home position even if the air supply is cut off
  · Non-locking type and locking type are standardized for manual release
  

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	92.13 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  Compact Guide Cylinder, MGP Series Improved Water Resistance Type

  SMC

  [Features]
  ・ Possible to use in environments exposed to water and coolant.
  ・ With improved water resistance 2-color display type auto switch.
  ・ Machine tools, food machines, car wash machines, etc.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	283.98 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  Space-Saving Super-Compact Cylinder, SSD2 Series

  CKD

  Cylinder switch grooves are installed on all four sides in the super compact cylinder.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	8 Days

• 

  Compact Cylinder, Standard Type, Single Acting, Single Rod, CQ2 Series

  SMC

  A space-saving cylinder designed with a short overall length. Helps to make jigs and equipment more compact.
  [Features]
  · Remodeled with a new body for more flexibility. Small auto switches can be mounted on the 4 surfaces.
  · Auto switches can be mounted at any position on the 4 surfaces to best match the installation conditions. (ø12 to ø25: 2 surfaces)
  · Improved design flexibility.
  · The auto switch rail has been removed. A round groove for mounting small auto switches has been provided on the 4 surfaces. · Supports up to ø200.
  · No projection of auto switches.
  · Lightweight: Reduced by 5 to 13% (compared to conventional CQ2 Series)
  · With auto switch.

  Select to compare

  Configure now
  Starting from∗ ：	19.06 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  RS2H, Heavy Duty Stopper Cylinder

  SMC

  Easily replaced air cylinder shock absorbers.
  [Features]
  · Can be replaced simply by loosening the set screw.
  · The adjustable shock absorber allows for a gentle stop.
  · Resistance value can be adjusted by rotating the adjustment dial.
  · Improved handling and visibility of the lock mechanism. (Option)
  · Piping is available from 2 directions, allowing for interchangeable mounting with previous series (RS1H).
  · Compact auto switch (D-M9□) and strong magnetic field resistant auto switch (D-P3DW) can be mounted on 3 sides.
  · 2 roller materials are available to suit the application. (Resin, carbon steel)
  · The roller lever direction can be changed in 90° steps.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	442.65 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  RSH, Stopper Cylinder, Heavy Duty

  SMC

  Air cylinder with built-in shock absorber to stop pallets gently.
  [Features]
  · Amount of energy absorption can be adjusted to suit the load.
  · Easy replacement of shock absorbers.
  · The roller lever direction can be changed in 90° steps.
  · Side piping (flange) is possible.
  · Bore size 20 mm: Standard stroke 15 mm.
  · Bore size 32 mm: Standard stroke 20 mm.
  *See the manufacturer's catalog for detailed specifications.
  *Product pictures are representations. CAD data is not supported for some model numbers.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	295.32 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Free Mount Cylinder, Double Acting: Single Rod CU Series

  SMC

  An air cylinder manufactured by SMC.
  [Features]
  · A space-saving air cylinder with multiple surfaces capable of direct mounting.
  

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	36.24 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Free Mount Cylinder, Long Stroke, CU Series

  SMC

  An air cylinder manufactured by SMC.
  [Features]
  · A space-saving air cylinder with multiple surfaces capable of direct mounting.
  

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	53.68 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  CQU Series Compact Cylinder Plate Type, Double Acting, Single Rod

  SMC

  Light and compact CQU Series Compact Cylinder Plate Type, Double Acting, Single Rod.
  [Features]
  · Easy maintenance.
  · The auto switch can be mounted with the support bracket attached.
  · Can be equipped with a small auto switch from 4 directions.
  · Designed so that the auto switches do not protrude.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	63.71 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  JC(D)Q, Compact Cylinder, Double Acting Single Rod

  SMC

  [Features]
  · Compact (compared to CDQS Series; overall length reduced by 6.5 mm, width by 6 mm, height by 4 mm).
  · Maximum weight 45% lighter (from 150 g to 82 g compared to CDQS Series ø25, 10‑mm stroke).

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	19.06 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Low Speed Cylinder, Standard Type, Double Acting, Single Rod, CQ2X Series 10- / 11-CQ2X Clean Series

  SMC

  [Features]
  · Reduced seizing and extending too quickly.
  · Realizes a smooth operation even at 0.5 mm/s (1 mm/s at ø16 or less).
  · Improved functionality (new structure equivalent to the standard models).
  · Interchangeable (mounting compatibility) with standard products.
  
  [10-/11-/12-Series, Clean Series]
  · Compatible with a clean environment.
  · Prevents generation of dust in cleanrooms.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	54.85 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  ISO Standard Compliant, Air Cylinder, Standard, Single Acting / Spring Return, Extend C85 Series

  SMC

  [Features]
  ・ ISO standard (6432) compliant
  ・ Parts numbers with mounting support brackets, rod tip brackets, and auto switch have been set.
  · Easy to make fine adjustments to the auto switch position.
  · Transparent switch bracket improves visibility of the indicator LED.
  ・ Made-to-order settings
  · Various mounting bracket options

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	31.42 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Thin cylinder with guide MGP series guide part with Lubretainer

  SMC

  [Features]
  ·Lubrication (lubrication holding function) is attached to the guide part.

  Select to compare

  Configure now
  Starting from∗ ：	265.85 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  C(D)BG1, Air Cylinder, Double Acting, Single Rod, End Lock

  SMC

  Standard-type cylinder with end lock.
  [Features]
  · Cylinder with female rod end available as standard.
  · Improved auto switch operability, easy to adjust position.
  · No trunnion mounting female thread added to basic type variation.
  · Part numbers are set for products with rod-end brackets and pivot brackets. (No need to order separately.)
  *See the manufacturer's catalog for detailed specifications.
  *Product pictures are representations. CAD data is not supported for some model numbers.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	97.03 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Air Cylinder, Standard Type, Lube / Non-Lube Type, Air-Hydro Type CS1 Series

  SMC

  Tie-rod type air cylinder.
  [Features]
  · Square cover.
  · Large bore size.
  *See the SMC catalog for specification details.
  *Product pictures are representative images. CAD data is not supported for some model numbers.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	513.10 €
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  C(D)G5-S, Stainless Steel Cylinder, Double Acting, Single Rod

  SMC

  A standard cylinder applicable for use in environments with water splashing such as for food machines.
  [Features]
  ・ For use with grease for food processing machines is used (NSF-H1 certified product).
  · All stainless steel specification (external parts).
  ・ 2 types of seal materials
  · External appearance which reduces liquid pooling.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	62.06 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Air Cylinder, Direct Mount Type: Double Acting, Single Rod CJ2R Series

  SMC

  An air cylinder manufactured by SMC.
  [Features]
  · Improved freedom in mounting.
  · Easy fine adjustment of auto switch position.
  · Transparent switch bracket improves visibility of indicator LED.
  · A head cover port location that is perpendicular to the axis has been added to ø6.
  · Part numbers are set for products with rod-end brackets.
  · Can be directly mounted with a square rod cover.
  

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	32.15 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  C(D)U-A, Free Mount Cylinder with Air Cushion

  SMC

  Air cylinder that adopts a new air cushion mechanism.
  [Features]
  · Multiple-surface direct mounting with a square body and no brackets lets you freely choose the mounting surface.
  · This enables space-saving designs for equipment.
  · Slightly extended dimensions relative to the CU standard models.
  · There is no protrusion of the cushion valve, and the width is the same.
  · 3 types of mounting orientations can be accommodated according to the installation conditions.
  · Approximately 2.4 times more allowable kinetic energy.
  · Improved sound insulation (reduced impact of noise at the stroke end).
  · Interchangeable mounting.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	105.13 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  MUW Series Plate Cylinder, Double Acting, Double Rod

  SMC

  Compact cylinder that allows small auto switches to be mounted in 4 directions.
  [Features]
  · Designed so that the auto switches do not project out. · Facilitates the mounting of an auto switch.
  · Reduction of labor for work.
  · Available with a stroke up to 300 mm.
  · Width: up to 62% smaller (compared to CA2 cylinder).
  · Can be mounted in flexible ways without needing brackets.
  · Can be mounted with a short pitch.
  · Various brackets are available to accommodate a wide range of applications.
  · 2-color indicator solid state auto switch.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	94.55 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  High-Precision Stroke Reading Cylinder, Non-Rotating Piston Type, CEP1 Series

  SMC

  Achieves streamlining of the production line.
  Movable scale cylinder / Stroke Reading Cylinder.
  [Features]
  · Measurement is possible for the full cylinder range.
  · The home position can be anywhere within the cylinder stroke.
  · Can be used in environments exposed to fluids (water, oil, coolant, etc.).

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1,057.69 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  ISO standard (15552) compliant smooth cylinder double acting single rod C96Y series

  SMC

  [Features]
  ·ISO standard (15552) compliant
  ·Lightweight: Up to 17% reduction
  ·New cushion method (air cushion + damper cushion) shortens tact time
  ·Damper cushion reduces metal noise when the piston is stopped

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	148.13 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Air Cylinder, Standard Type, Double Acting, Single Rod 55-CG1 Series

  SMC

  [Specifications]
  ・Cylinder Operation Method: Double Acting
  ・Main Body Shape: Standard
  ・With Auto Switch
  ・Bore Size 25 mm
  ・Cylinder Stroke: Standard Stroke 75 mm

  Select to compare

  Configure now
  Starting from∗ ：	48.73 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Air Cylinders / Pen / Double Acting

  MISUMI

  [Features] Compact, double-acting cylinder in pin shape that does not require much space.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	26.19 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  General cylinder tight cylinder CMK2 Series

  CKD

  Medium grooves in general cylinder, high corrosive resistance and long operating life. Caulking type cylinder.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	13 Days

• 

  Space Saving Super Compact Cylinder SSD Series

  CKD

  Rectangular, space saving cylinder in which the cylinder switch is integrally housed in the body and total length of the cylinder is ultimately shortened.

  2D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	7 Days

• 

  High Speed Type High Energy Absorbing Cylinder - HCM Series

  CKD

  The cylinder can perform with high speed and undertake high energy absorption. Can be used to remove molded products like resin.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Min. Shipping Days ：	9 Days

• 

  Compact Guide Cylinder, Heavy Duty Guide Rod Type MGPS Series

  SMC

  A heavy duty guide rod type compact cylinder with guide that has improved load capacity.
  [Features]
  · Saves space.
  · Heavy duty guide rod type.
  · By reducing the guide rod length by as much as 22 mm, the amount of machining work required to create clearance between the bottom of the cylinder body and the equipment has been reduced.
  · Bearing type: slide bearing.
  · Inner diameter: 50 mm, 80 mm.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	487.27 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  ZC(D)UK, Free Mount Cylinder w / Vacuum Pad

  SMC

  A compact square cylinder with high installation accuracy.
  [Features]
  · CU Series with a vacuum passage in the rod for easy mounting of vacuum pads.
  · Helps save space.
  · Not necessary to provide vacuum tubing space at the end of the rod.
  *See the SMC catalog for specification details.
  *Product pictures are representative images. CAD data is not supported for some model numbers.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	79.27 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  MTS, Precision Cylinder (Bores 12-40)

  SMC

  A precision cylinder with an internal guide function that can be mounted with high accuracy.
  [Features]
  · Deflection: 0.1 mm or less (within the allowable lateral load value of MTS12-25).
  · Requires less mounting space. Reduced labor for design and assembly.
  · Auto switches can be mounted on 4 surfaces (bore size 8 mm: 2 surfaces).
  · 3 types of mounting are possible. Tapped mounting (bottom mounting, front mounting), Through-hole mounting (both sides mounting).
  · 2 types of rod end configuration (Standard: rod end female thread, Option: rod end male thread, using stud bolt).
  · Air cushion available as standard (bore size 8 mm: rubber bumper).
  · Head side end lock type added to series (bore size 12 to 40 mm).
  · The specially configured rod seal design delivers sealing and durability equivalent to conventional round rod models.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	286.77 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Lateral Load Resisting Cylinder, Low Friction, MQM Series

  SMC

  An air cylinder suitable for all driving ranges, from low pressure, low speed, uniform speed and low friction to high pressure, high speed and high-speed response (high frequency).
  [Features]
  · Covers a range of driving speeds and output controls not possible with standard cylinders thanks to its metal seal structure with minimal sliding resistance.
  · Minimal sliding resistance allows low-pressure actuation at 0.005 MPa.
  · Low- and uniform-speed actuation. Smooth, uniform-speed actuation ranges as low as 0.3 mm/s.
  · Low sliding resistance allows output control in approx. 0.05 N increments. (Based on cylinder piston area × pressure accuracy)
  · No increased sliding resistance after not operating for a long period of time.
  · Long lifespan: Long service life of 10,000 km or 100 million full cycles.
  · Lateral load resistance increased by built-in ball bushing.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	366.82 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  HYG Series Hygienic Design Cylinder

  SMC

  HYG Series Hygienic Design Cylinder with an easy-to-clean format.
  [Features]
  · Air cylinder with improved water resistance.
  · To keep the product flat, grooves for auto switches and holes for cushion needles, etc. have been eliminated.
  · Approximately 5 times increase in lifespan (compared to manufacturer's current models).
  · Able to handle food grease (NSF-H1 certified).
  · NBR or FKM can be selected as the external sealant material.
  · Mounting part: ISO standard (VDMA) compliant (HYC).

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	401.65 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  M(D)U Plate Cylinder, Double Acting, Single Rod w / Auto Switch Mounting Groove

  SMC

  Plate Cylinder, Double Acting, Single Rod MU Series that allows small auto switches to be mounted in 4 directions.
  [Features]
  · Auto switches can be mounted easily.
  · Can be mounted without brackets and in flexible ways.
  · Can be mounted with a short pitch.
  · Various brackets are available to accommodate a wide range of applications.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	68.77 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Air Cylinder, Double Acting, Single Rod (JCM / JCDM Series)

  SMC

  An air cylinder with a wide variety of cover types available.
  [Features]
  · There are no parts near the indicator LED, so visibility is improved.
  · To mount the auto switch, simply insert it and position it correctly.
  · Overall length shortened by up to 97 mm.
  · Selectable port sizes: M5, Rc, NPT1/8.
  · Male and female rod ends are available.
  · With auto switch (JCDM).

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	53.73 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  JMB Series Air Cylinder, Double Acting, Single Rod

  SMC

  Air cylinder with auto switch (built-in magnet).
  [Features]
  · Air consumption reduced by up to 29% thanks to optimal size selection.
  · Reduces labor time: no air cushion adjustment required thanks to non-adjustable air cushion.
  · RoHS compliant.
  · Mounting: basic type.
  · Port thread types: Rc, NPT, G.
  · *Not available without magnet.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	159.77 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  CA2W Series Air Cylinder, Standard Type: Double Acting, Double Rod (Standard / Heat Resistant)

  SMC

  Air cylinder that is up to 15% lighter in weight.
  [Features]
  · Standard type: double acting, double rod specification.
  · Easy air cushion control.
  · Available with (CDA2W) or without (CA2W) auto switch.
  · RoHS compliant.
  · Mounting: basic, axial foot, rod-side flange, center trunnion.
  · Bore size: 40 mm / 50 mm / 63 mm / 80 mm / 100 mm.
  · Port thread types: Rc, NPT, G.
  · Tube material: aluminum tube, steel tube (*Not available for products with auto switch.)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	189.23 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  ISO standard compliant thin cylinder double acting single rod C55 series

  SMC

  [Features]
  ·ISO standard (21287) compliant
  ·Small auto switch can be mounted on 4 sides

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	41.68 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Compact Cylinder, Standard Type, Double Acting, Single Rod 55-CQ2 Series

  SMC

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	32.03 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Air Cylinder With Lubrication Retainer (Lube-Retainer), Standard Type, Double Acting, Single Rod CM2 Series

  SMC

  [Features]
  ·Durability is improved by forming a grease film on the surface of the piston rod.
  ·Prevents powder and foreign matter from entering
  ·The number of operations can be improved even in a general environment.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	72.90 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  Air Cylinder With Lubrication Retainer (Lube-Retainer), Standard Type, Double Acting, Single Rod CA2 Series

  SMC

  [Features]
  ·Durability is improved by forming a grease film on the surface of the piston rod.
  ·Prevents powder and foreign matter from entering
  ·The number of operations can be improved even in a general environment.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	279.05 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

• 

  ISO Standard Compliant Air Cylinder, Standard Type, Double Acting, With Cushion CP96 Series ø125

  SMC

  [Features]
  ·ISO standard (15552) compliant
  ·Easy adjustment of cushion valve
  ·Grooves for CNOMO, D-M9□, A9□ are arranged on 4 sides

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	383.79 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Guide Cylinder MGG Series Improved Water Resistance Type / Copper and Fluorine-Free Specification Type

  SMC

  [Specifications]
  ・Type of Shaft Bearing: Ball bushing bearing type, Slide bearing type
  ・Cylinder Operation Method: Double Acting
  ・Main Body Shape: Guided
  ・MGG Series
  
  [Features]
  ・Can be used in environments where contact with water or coolant occurs
  ・With water-resistant 2-color indication auto switch
  ・Suitable for factory machinery, food manufacturing machinery, car washes, etc

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	602.32 €
  Min. Shipping Days ：	26 Days

  *Unit price with basic configuration

Loading...