Clamping Knobs（Page 7）

Shipping Days	All Same day 1 Day or Less 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less

?* Information on days to ship and prices

• • Promotional pricing ends 30/11/2024

  

  Hand knobs, Plastic, protruding Stainless Steel bushing, Stainless Steel-Threade

  GANTER

  The hand knobs have an immaculate contact or clamping surface thanks to the protruding Stainless Steel bushing.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.96 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Knobs, Stainless Steel

  GANTER

  Stainless Steel-Knobs GN 676.5 are used in applica-tions where a push or pull movement is required. Their concave top gives a more comfortable thumb grip.
  The knurled model (Type B) can be used as an attractively shaped knurled knob with a threaded blind hole.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.78 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Knurled screws with recessed stud for loss prevention

  GANTER

  Knurled screws GN 653.2 can be used for to prevent loss of the thumb screw, due to the d4 recessed portion of the stud.
  When using, instead of a typical tapped and bore hole, it is necessary to provide tapped bores with a thread d1 on each of the two elements to be assembled. Additionally, a clearance bore of d5 on one or both sides must be cut.
  Depending on the design and required clamping length a1 ... a3 of the component being attached, there are a number of assembly options as shown above.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.12 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Knurled screws, with pivot

  GANTER

  Knurled screws GN 7336.5, type MS/KU with brass or plastic pivots are used when pressure dents or damage must be avoided.
  Knurled screws GN 7336.5, type ZK feature a spherical pivot whose Ø d6 is smaller than the core Ø of the thread. The version with spherical pivot is suitable for holding GN 631 / GN 631.5 thrust pads, which must be ordered separately.
  The knurled screws GN 7336.5 distinguish an attractive design in combination with closed shape (no recess on the underside of the handles).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.26 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Quick release star knobs, Plastic, bushing, Stainless Steel

  GANTER

  Quick release star knobs GN 6336.3 are used in such applications where the knob has to be completely removed after the releasing operation and refitted rapidly for re-clamping.
  The knob is tilted over the threaded spindle. When in position, the knob is brought into a straight position for meshing of the two threads on nut and spindle. The knob will then have to be turned only by fraction of a rotation to achieve clamping.
  Functional safety exists only if the clamping surface lies at a right angle to the threaded bolt.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.08 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Stainless Steel-Flat knurled screws with brass / plastic pivot

  GANTER

  Stainless Steel-Flat knurled screws GN 653.10 with pivot in brass or plastic are used in applications, where marks and damages on the workpiece are unacceptable.
  The head dimensions comply with flat knurled thumb screws DIN 653.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.44 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel-Indexing mechanisms

  GANTER

  Stainless Steel-Indexing mechanisms GN 200 replace and simplify complicated indexing and safety mechanisms.
  Besides the standard scale (Type AS) the control knob version may be supplied with any scale.
  Regarding design, numbering run, numbering position and numbering sequence of the scale please see the layout for scale rings on the order sheet „How to order Graduations“.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	123.10 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Stainless Steel-Star knobs AISI 316L (A4)

  GANTER

  The original ELESA design with 5 recess grips is typical for GN 5334.4 star knobs.
  This form gives these grips an appealing look and additionally allows a high torque to be achieved.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	15.18 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Stainless Steel-Star knobs with threaded bolt AISI 316L (A4)

  GANTER

  The original ELESA design with 5 recess grips is typical for GN 5334 star knobs.
  This form gives these grips an appealing look and additionally allows a high torque to be achieved.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	15.44 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Stainless Steel-Star knobs with threaded stud

  GANTER

  Stainless Steel-Star knobs with threaded stud GN 5335 are a special development intended for the food processing machinery industry. The smooth and enclosed areas as well as the large corner radii comply with the requirements of hygiene standards.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	21.98 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Star knobs with protruding Stainless Steel bushing

  GANTER

  Star knobs GN 6336.1 with all Stainless Steel bushing (main dimensions of DIN 6336) have important advantages:
  The face of the bushing is exactly square to the bore and is with the complete diameter out of Stainless Steel. The protruding Stainless Steel bushing allows a perfect cross-dowels connection.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.02 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Star knobs, Aluminum

  GANTER

  Star knobs, Aluminum

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.44 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Tommy nuts, with movable bar

  GANTER

  The movable bar of the tommy nut DIN 6307 is held in any position by the pressure spring.
  The plastic end caps limit the travel distance. They are pressed on with form-lock and may be supplied separately if the parts are to be electro-plated. The official DIN standard sheets provides for steel rings at this point.
  

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	15.66 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  ELK. - Knobs with rear lobes -Technopolymer

  ELESA

  Knob with rear lobes.
  Glass-fibre reinforced polyamide based technopolymer, grey-black colour.
  Technopolymer cover in Ergostyle colours, ultrasonically welded to the body of the knob.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.26 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  GFL - Lobe threaded nut -Technopolymer

  ELESA

  Lobe threaded nut.
  Glass-fibre reinforced polyamide based technopolymer.
  The ergonomic seven-lobe shape allows an effective grip to the operator when tightening.
  Suitable for axial locking; it can be used as a nut.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.80 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  I.281 - Cylindrical revolving handles -Duroplast

  ELESA

  Revolving handles.
  Phenolic based (PF) Duroplast, black colour, glossy finish.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.31 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  I.580 N - Cylindrical handles -Technopolymer

  ELESA

  Cylindrical handles.
  High-resilience polypropylene based (PP) technopolymer, black colour, matte finish.
  Blind hole.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.46 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  I.622 - Tapered handles -Technopolymer

  ELESA

  Tapered handles.
  Polyamide based (PA) technopolymer, six standard colours: black, orange, grey, yellow, light-blue, red. Glossy finish.
  threaded blind hole.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.28 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  I.622 N - Tapered handles -Technopolymer

  ELESA

  Tapered handles.
  High-resilience polyamide based (PA) technopolymer.
  I.622 N-CLEAN: white colour with glossy finish.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.43 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  I.631+x - Revolving handle -Technopolymer

  ELESA

  Revolving handle.
  High-resilience polypropylene based (PP) technopolymer, black colour, matte finish.
  Zinc-plated steel pin, hexagon socket at threaded end.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.60 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  I.680 SOFT - Cylindrical handles -Soft-touch technopolymer

  ELESA

  Cylindrical handles.
  High-resilience polypropylene based (PP) technopolymer, coated with "soft-touch" thermoplastic elastomer (TPE) chemically bonded, hardness 70 Shore A, black colour, matte finish.
  Produced from FDA compliant raw material (FDA CFR.21 and EU 10/2011).
  threaded blind hole.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.50 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  IEL.N SOFT - Mushroom handles -Soft-touch technopolymer

  ELESA

  Mushroom handles
  High-resilience polypropylene based (PP) technopolymer, coated with "soft-touch" thermoplastic elastomer (TPE) chemically bonded, hardness 70 Shore A, black colour, matte finish.
  Produced from FDA compliant raw material (FDA CFR.21 and EU 10/2011).
  Plain blind hole.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.72 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  IEL+X SOFT - Mushroom revolving handles -Soft-touch technopolymer

  ELESA

  Mushroom revolving handles.
  High-resilience polypropylene based (PP) technopolymer, coated with "soft-touch" thermoplastic elastomer (TPE) chemically bonded, hardness 70 Shore A, black colour, matte finish.
  Produced from FDA compliant raw material (FDA CFR.21 and EU 10/2011).
  Zinc-plated steel pin, hexagon socket at threaded end.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.22 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  IZN.380 - Knurled control knobs -Technopolymer

  ELESA

  Knurled control knob in black glass fibre reinforced polyamide-based technopolymer with light grey acetal-based technopolymer boss cap, push-fit assembly and removable by pressing on the outer edge.
  Option to have plain knob, knob with matte anodized aluminium flange and triangular black index, knob with matte anodized aluminium flange and graduation in black with 40 marks or 100 marks.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.58 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  IZP. - Knurled control knobs -Technopolymer

  ELESA

  Glass-fibre reinforced polyamide based technopolymer adjustable knurled knob, black colour, with anodised aluminium self-adhesive front plate.
  Option to have plain knob, knob with triangular index and knob with standard graduation, 20 marks, numbering from 0 to 9 increasing by turning the knob clockwise (precision laser engraved graduations).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.26 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  LBR. - Control levers -arranged for clicking operation technopolymer

  ELESA

  Control lever arranged for clicking operation with central body in glass fibre reinforced polyamide-based technopolymer, chrome matte steel arm with cylindrical handle I.280 in duroplast and self-adhesive front plate in matte anodized aluminium to be applied after assembly.
  A limited manoeuvre angle is possible by fitting stop pins in the rear guide slot.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.08 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  MA. - Labels with marks and symbols -Self-adhesive aluminium

  ELESA

  Labels with marks and symbols.
  Self-adhesive vinyl film, suitable for sticking to the inner surface of the magnifying lens of all the following handles: SH.N, IH.N, IEL.N-H-SOFT, EBK-H SOFT.
  The visibility of the symbol is improved by the magnifying effect of the lens provided with the handle.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.77 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  TMB. - Magnetic plugs -Aluminium

  ELESA

  Magnetic caps in black anodized aluminium with the word "MAGNETIC" and relevant graphic symbol laser engraved, permanent magnetic element in aluminium, nickel, cobalt (AlNiCo) with high power of attraction for the retention of any metal particles present in the oil and NBR synthetic rubber packing ring (max. operating temperature 100°C) or FKM (max. operating temperature 180°C).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.24 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  VB.639 - Three-arm knobs -Technopolymer

  ELESA

  Three-arm knob.
  Glass-fibre reinforced polyamide based (PA) technopolymer or glass-fibre reinforced polypropylene based (PP) technopolymer.
  Designed for heavy duty work for a firmer clamping action.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.54 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  VC.692-CLEAN - Lobe knobs -Technopolymer easy cleaning

  ELESA

  Five-lobe knob with solid section, easy cleaning.
  Glass-fibre reinforced polyamide based technopolymer, white colour.
  The exclusive five-lobe shape offers the operator's fingers a proper grip and prevents unhealthy residues from depositing thanks to its solid shape without cavities.
  This knob is particularly suitable for applications on machines and equipment whose parts must be frequently cleaned by using water jets or steam.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.93 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  VCR.192 - Shortened lobe knobs -Duroplast square hole

  ELESA

  Shortened five-lobe knob in phenolic-based duroplast with square pass-through hole with brass insert.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.70 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  VTT - Knobs with solid section -Technopolymer easy cleaning

  ELESA

  Three-lobe knob with solid section.
  Glass-fibre reinforced polyamide based technopolymer.
  The three-lobe shape with large recesses is particularly ergonomic also for smaller knobs, ensuring an effective grip even with work gloves.
  The design without rear cavities, generally adopted for reducing thickness, prevents unhealthy residues from depositing, ensuring easy cleaning.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.39 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  VTT-CLEAN - Knobs with solid section -Technopolymer easy cleaning

  ELESA

  Three-lobe knob with solid section, easy cleaning.
  Glass-fibre reinforced polyamide based technopolymer, white colour.
  The three-lobe shape with large recesses is particularly ergonomic also for smaller knobs, ensuring an effective grip even with work gloves.
  The design without rear cavities, generally adopted for reducing thickness, prevents unhealthy residues from depositing, ensuring easy cleaning.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.60 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Safety star knobs, Plastic

  GANTER

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	11.86 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Stainless Steel-Three-lobe knobs AISI 303

  GANTER

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	22.28 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Star knobs, Cast iron, zinc plated, blue passivated

  GANTER

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.42 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Ball knobs smooth DIN 319 enhanced, Form E, with tapped bush (K0159)

  KIPP

  · Can be used as a clamping, retaining and fastening element
  
  · Application fields: machine, plant and fixture construction, toolmaking
  
  · For manually adjusting assemblies, machines and aggregates
  
  · Form E: tapped bush
  
  · Different thread sizes

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.55 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Ball knobs thermoplastic DIN 319 enhanced, Form M, with tapered bore (K0158)

  KIPP

  · Can be used as a clamping, retaining and fastening element
  
  · For manually adjusting assemblies, machines and aggregates

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.55 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Five lobe grips external thread (K0255)

  KIPP

  · Can be used as a clamping, retaining and fastening element
  
  · Application fields: machine, plant and fixture construction, toolmaking
  
  · For manually adjusting assemblies, machines and aggregates
  
  · K0255_AG
  
  · Various colours available

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.23 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Five lobe grips plastic lockable with female thread (K1378)

  KIPP

  · Prevent unauthorised loosening of the fastening
  
  · The key can be removed in both positions (open and closed)
  
  · The five lobe grips are supplied with 2 keys

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	19.99 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Flat four lobe grips with external thread (K0278)

  KIPP

  · Can be used as a clamping, retaining and fastening element
  
  · Application fields: machine, plant and fixture construction, toolmaking
  
  · For low installation spaces
  
  · SYMPA touch: optimum grip and hold due to high ergonomics
  
  · The non-slip material perfectly adapts to the human hand during grip movements

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.21 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing and clamping grip (K1582)

  KIPP

  · Indexing and clamping with one product
  
  · Ergonomic operation via star grip

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.52 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Knurled knobs aluminium (K1099)

  KIPP

  · Suitable for manual positioning and clamping
  
  · Application fields: machine and plant construction, toolmaking
  
  · Advantage: knurled nut is tightened and loosened with tools
  
  · Thread sizes: M4 and M5

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.81 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Knurled knobs for hex head screws, Form A (K1138)

  KIPP

  · Suitable for manual positioning and clamping
  
  · Application fields: machine, plant and fixture construction, toolmaking
  
  · Advantage: knurled nut is tightened and loosened with tools
  
  · Especially for use with ISO 4014 screws
  
  · Colours: black and orange

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.54 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Knurled knobs with external thread (K0247)

  KIPP

  · Suitable for manual positioning and clamping
  
  · Application fields: machine, plant and fixture construction, toolmaking
  
  · Advantage: knurled nut is tightened and loosened with tools
  
  · 7 colour variants

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.33 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

Loading...