Adjustable Feet（Page 3）

?* Information on days to ship and prices

• 

  Vibration-Proof Wedge Mount PKA (Bolt-On Type)

  NABEYA

  A wedge mount that features a vibration-proof function.
  
  [Features]
  · A type for fixing machinery and mounts.
  · A precision leveling wedge mount featuring a precise leveling mechanism, a large adjustment stroke, and a vibration-proof function.
  · In particular, it can be used for vibrations caused by machinery, die-cast machines that cause strong shocks, as well as injection molding machines and impact testing machines, etc.
  · Leveling screw for flexible connection (BNVRBF) can be used for the fixing screw.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	360.09 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Foot Jack FJR Model (Rubber Type)

  NABEYA

  Since it includes rubber, floors are not damaged and slipping is prevented.
  
  [Features]
  · Since it includes rubber, floors are not damaged and slipping is prevented.
  · A hex nut is press-fitted to the bottom of the base to enable quick assembly with an impact wrench, etc.
  · The rubber has liquid resistance (gasoline, kerosene, acid, alkali) and can be used from -22°C to 100°C.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.29 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Leveling Element BNRSV (Stainless Steel)

  NABEYA

  A leveling element suitable for industrial machinery, such as used for the chemical and industrial machinery.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	100.56 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Adjuster with Bottom Part Rubber for Light Vibration-Proofing D-A III / D-A III FR / D-A III SI / D-B III / D-B III FR / D-B III SI

  DAIWARASHI

  An adjuster for light vibration-proofing equipped with rubber on the back side of the adjuster base. Note: Please be advised that the model number in VONA has been changed from "D-A III" to "D-A3."
  
  [Features]
  · Since the rubber part comes in contact with the floor, floor damage is prevented.
  · A light vibration-proof type adjustment bolt.
  · However, since the rubber hardness is 80°, repulsion is higher than low elasticity rubber and does not demonstrate much of a vibration-proofing effect. For this reason, please compare with other vibration-proof types such as the D-G series when using.
  · Can easily be mounted using a screwdriver since a Phillips head slot has been provided on the bottom of the bolt.
  · A nylon washer is used between the receiver and bolt, and rotation is smooth.
  · The FR type uses non-migratory rubber so traces of rubber do not remain when moving the machinery.
  · The SI type is white and is characterized by hardly leaving traces of rubber.
  · Suitable for office equipment, etc.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.01 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Adjuster for Heavy Weights D-C / D-C / S

  DAIWARASHI

  A standard type adjuster for heavy loads
  
  [Features]
  · The receiver is a forged item.
  · Since it is a mold release surface that has undergone hot forging, unevenness does not stand out, unlike mold casting.
  · D-C-S has a luxurious feel since the surface of the receiver is grind-processed with a lathe.
  · Since the receiver is forged, it features a load resistance of 10 tons or more. However, since the screw is buckled first, load resistance depends on the screw diameter.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.98 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Adjuster for Heavy Weights (Long Screw Type) D-C-L / D-C-L/S

  DAIWARASHI

  A long screw adjuster with a wide adjustment range
  
  [Features]
  · Although the dimensions in the table are in increments of 50 mm, dimensions can be cut as desired upon request.
  A limited quantity of 500 mm total length products are available for M16 and M20.
  · D-C-LS has a luxurious feel since the surface of the receiver is grind-processed with a lathe.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.04 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Adjuster with Rubber for Heavy Weights (Thrust Bearing Equipped) WD-C-R

  DAIWARASHI

  A rubber type adjuster for medium loads with a thrust bearing that enables smooth leveling
  
  [Features]
  · Receiver features a chloroprene rubber coating.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	49.08 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Adjuster with Rubber for Heavy Weights (Wide Receiver Type) D-C III-R

  DAIWARASHI

  A wide base type adjuster for medium loads with rubber. Note: Please be advised that the model number in VONA has been changed from "D-C III" to "D-C3."
  
  [Features]
  · The receiver features a chloroprene rubber coating and the rear side of the rubber has undergone groove processing to make it resistant to slipping.
  · Has a larger outer diameter than D-C-R and feels more stable and heavy.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	23.14 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Quick Adjuster KC-24-3

  TAKIGEN

  Height adjustment can be easily performed just by pushing a button. After fixing, fine adjustments are possible by rotating the leg portion.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.05 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Level Adjuster KC-275-A

  TAKIGEN

  Suitable for machine tools and vending machines.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.27 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Level Adjuster KC-282

  TAKIGEN

  A low cost type in which the shaft part and bottom part are integrated.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.01 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel Head Swinging Leveling Foot for Heavy Loads K-1277-B

  TAKIGEN

  Stainless steel with superior corrosion resistance.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	132.08 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Adjuster 111A, Wheel Diameter 32-38mm

  TAKIGEN(HAMMER CASTER)

  A glide in which an adjusting screw is inserted into a resin base. The product is used widely for furniture, etc., and is essential for the protection of floor surfaces and carpets.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.60 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Adjuster Pad (KC-2731P)

  RICH ENGINEERIN

  Select to compare

  Configure now
  Starting from∗ ：	14.99 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Level Adjuster (KA)

  IMAO CORPORATION

  [Features] The stainless steel type has excellent corrosion and water resistance. Approved load: 3 kN, 5 kN.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.39 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Level Adjuster (for Heavy Loads) (KA)

  IMAO CORPORATION

  Excellent cost performance
  
  [Features]
  · Fixing is possible using the KACP (clamp plate for level adjusters) sold separately.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	11.41 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Clamp Plate for Level Adjuster (KACP)

  IMAO CORPORATION

  [Features] Use KA60 level control for fixing heavy loads.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.71 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Adjuster Bolt (500 / 600 kg Type) (with Foot Stop Plate)

  TRUSCO NAKAYAMA

  · Features an anchor hole for fixing to the floor.
  · A hole is provided to the pedestal part and to enable it to be fixed to the floor with an anchor. Used to prevent equipment movement caused by intense vibrations.
  · Machine tools, vending machines, conveyors, work benches, control panels, and scientific instruments.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	10.85 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Adjusting Nut

  SUNCO

  [Nominal of Thread M (mm)] 8/10/12/16/20
  [Material] Iron / Stainless Steel
  [Surface Processing] None / Bright Chromate Plating / Trivalent Chromate
  [Main Body Height (mm)] 19/20/27/29/32.5
  [Width (mm)] 38/60/75/78

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.62 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Foot adjustable PA6 110 / M16-160 - 55 / 85 / 195

  EUROFLEX

  PA 6/Galvanized Steel incl. fastening elements
  System width: 55/85/195

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	42.63 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Foot adjustable Stainless Steel 80 / M16-180 - 55 / 85 / 195

  EUROFLEX

  Stainless Steel/NBR rubber
  System width: 55/85/195

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	64.02 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  6465 Precision wedge block

  AMF

  Precision wedge block Centring hole 12 mm. Case-hardened steel and fine-machined wedge surfaces. A spherical attachment no. 6440 is included with every precision whipstock. The product is available per 1 peace.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1,482.69 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Levelling Feet with Vibration Damping Element / GN 148 / with two-hole flange, with four-bolt flange

  GANTER

  Levelling feet GN 148 are designed for setting up heavy machinery and units with insulation against vibrations.
  This has a positive impact on the lifetime of machines and additionally reduces the noise pollution.
  The structure is such that horizontal forces are also absorbed.
  The design with tear-off lock (Type 2) protects the levelling feet from destruction caused by tear-off under excessive tension loads.
  The details relating to the load bearing capacity are non-binding recommended values and rule out any liability. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	41.82 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Support Legs

  HALDER

  The support legs are universally usable as adjustable legs.
  The plate is screwed to the threaded pin and nut by a stainless steel fastening screw, and is also glued.

  Select to compare

  Configure now
  Starting from∗ ：	4.70 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Support Legs, impact cushioning

  HALDER

  The support legs are universally usable as adjustable legs.
  These support legs with a rubber foot have a damping, noise-reducing effect, and prevent damage to the support surface.

  Select to compare

  Configure now
  Starting from∗ ：	5.05 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Foot plates, without central fastening hole

  GANTER

  [Specifications]
  ・Material: Steel
  ・Surface treatment: Powder coated
  ・Color: Black
  ・Type: without rubber underlay, with rubber underlay, with O-ring
  ・Foot diameter d1: 80-200
  ・Radius r: R20-R35
  
  Foot plates GN 36.1 are characterized by their solid construction and large variety. They are used especially on large and heavy systems and machines.
  The foot plates are ideal for use with customized adjustment or compensation stems that have the spherically shaped absorption radius "r" at the contact point. DIN screws or threaded studs with chamfer or pointed nose used as an alternative reduce the load capacity due to the lack of full-surface contact.
  Type B with rubber underlay prevents slipping to the side, protects delicate surfaces and dampens vibrations and tremors. Type C with O-ring provides a seal over the ground to prevent the build-up of dirt under the foot.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	13.10 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Foot plates, central fastening hole

  GANTER

  [Specifications]
  ・Material: Steel
  ・Surface treatment: Powder coated
  ・Color: Black
  ・Type: without rubber underlay, with rubber underlay, with O-ring
  ・Foot diameter d1: 80-200
  ・Radius r: R20-R35
  
  Foot plates GN 37.1 are characterized by their solid construction and large variety. They are used especially on large and heavy systems and machines. The through-hole allows the machine feet to be attached centrally to the ground, making them ideal for compressive and tensile loads.
  The foot plates are ideal for use with customized adjustment or compensation stems that have the spherically shaped absorption radius "r" at the contact point. DIN screws or threaded studs with chamfer or pointed nose used as an alternative reduce the load capacity due to the lack of full-surface contact.
  Type B with rubber underlay prevents slipping to the side, protects delicate surfaces and dampens vibrations and tremors. Type C with O-ring provides a seal over the ground to prevent the build-up of dirt under the foot.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	13.16 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Levelling feet in Hygienic DESIGN, Form A (K1303)

  KIPP

  · Specially for the hygiene sector
  
  · Application sectors: foodstuff industry, breweries, dairies, beverage and pharmaceutical industries
  
  · High surface quality
  
  · 3-A certified
  
  · Swivel angle 15°

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	71.15 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Levelling feet round with hex collar (K0675)

  KIPP

  [Specifications]
  ・Main material: Polyamide
  ・H=Height(mm): 16
  
  [Features]
  ・Compensates for uneven ground
  ・Application sectors: machine and equipment construction, logistics and assembly
  ・Assembly aid: hexagon and cross slit in plate base
  ・Various versions

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.47 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Levelling feet with hex base (K0676)

  KIPP

  · Compensates for uneven ground
  
  · Application sectors: machine and equipment construction, logistics and assembly
  
  · Hexagonal base
  
  · Various versions

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.36 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Levelling feet with hole (K0678)

  KIPP

  [Specifications]
  ・Main material: Steel
  
  [Features]
  ・Compensates for uneven ground
  ・Application sectors: machine and equipment construction, logistics and assembly
  ・The rotatable threaded spindle is pressed into the foot plate
  ・Various versions

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.71 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Swivel feet, Form C and D (K0395)

  KIPP

  · Components for assembling a swivel foot
  
  · Application sectors: machine and equipment construction, logistics and assembly
  
  · The anti-slip plate absorbs vibrations and prevents swivel foot slipping
  
  · Various materials

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.56 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Levelling feet in Hygienic DESIGN, Form A (27791)

  NORELEM

  · Specially for the hygiene sector
  
  · Application sectors: foodstuff industry, breweries, dairies, beverage and pharmaceutical industries
  
  · High surface quality
  
  · 3-A certified
  
  · Swivel angle 15°

  Select to compare

  Configure now
  Starting from∗ ：	87.96 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Levelling feet steel or stainless steel Form A (27790)

  NORELEM

  · Components for assembling a swivel foot
  
  · Application sectors: machine and equipment construction, logistics and assembly
  
  · Rubber pad dampen structural sound
  
  · Suitable nuts included
  
  · Material: Foot plate and threaded spindle, steel or stainless steel

  Select to compare

  Configure now
  Starting from∗ ：	10.21 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Levelling Pads 2259, Type A

  MAEDLER

  Material Type A: Ball bearing: free cutting steel, induction hardened, black oxide finish.
  Pad: steel, heat-treated, black oxide finish.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.49 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Precision Levelling Adjusters - Precision Levellers with Lock Nut MN 686.2, Standard

  MAEDLER

  Material:
  Standard Version: 42CrMo4V, Nr. 1.7225, zinc-plated and blue passivated.
  • For parallel surfaces.
  • Larger overall height with more adjustment travel.
  • With lock nut.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	39.96 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Precision Levelling Adjusters - Precision Levellers MN 686.1, Standard

  MAEDLER

  Material:
  Standard Version: 42CrMo4V, Nr. 1.7225, zinc-plated and blue passivated.
  • For parallel surfaces.
  • Larger overall height with more adjustment travel.
  • Without lock nut.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	31.14 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Precision Levelling Adjusters - Precision Adjusters MN 686.6, Standard

  MAEDLER

  Material:
  Standard version: 42CrMo4V, No. 1.7225, zinc-plated and blue passivated.
  • For parallel surfaces.
  • Low overall height with short adjustment travel.
  • With lock nut.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	43.77 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Precision Levelling Adjusters - Ball Head Precision Adjusters MN 686.4, Standard

  MAEDLER

  Material:
  Standard version: 42CrMo4V, No. 1.7225, zinc-plated and blue passivated.
  • For non-parallel surfaces up to 4º slope.
  • Low overall height with short adjustment travel.
  • Without lock nut.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	41.53 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Levelling Pads 2259, with External Thread, Type AG

  MAEDLER

  Material Type AG: Ball with threated bolt: free cutting steel,induction hardened, black oxide finish.
  Pad: steel, heat-treated, black oxide finish.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	23.50 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Plug with felt glide, form B square (27799)

  NORELEM

  · For round and square tubes
  
  · With felt glide surface
  
  · Gentle gliding
  
  · Noise dampening
  
  · For sensitive and hard floors

  Select to compare

  Configure now
  Starting from∗ ：	1.64 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Levelling wedge free-standing, steel (27710)

  NORELEM

  · Compact
  
  · Highly precise
  
  · High load capacity

  Select to compare

  Configure now
  Starting from∗ ：	128.15 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Levelling wedge free-standing, insulated, steel (27710)

  NORELEM

  · Spacious support surface
  
  · Millimetre-precise fine adjustment
  
  · Continuous insulation

  Select to compare

  Configure now
  Starting from∗ ：	112.37 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Leveling Mount Space Saving Type (Light Duty)

  MISUMI

  [Features] This product can effectively use space even in the presence of obstacles.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.79 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Adjuster AJ Series

  NANSIN

  A standard adjuster.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.59 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

Loading...