Adjuster（Thread Material：Steel Page 2）

?* Information on days to ship and prices

• • Promotional pricing ends 30/11/2024

  

  Adjuster for Anchor Fixing D-E II /D-E II-ST

  DAIWARASHI

  A standard item adjuster bolt for anchor fixing. Note: Please be advised that the model number in VONA has been changed from "D-E II" to "D-E2."
  
  [Features]
  · Similar to D-A, it is structured so that fixing of the receiver and bolt is performed by placing the bolt protrusion into the receiver and pressing a nut into it.
  · Can easily be fixed using an anchor bolt.
  · Please use an anchor bolt.
  · Please use a 12 mm anchor bolt.
  · Bolts shorter than 12 × 70 are not recommended for complete fixing due to safety concerns.
  · Note: The screw rotates and tilts somewhat.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.12 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Adjuster, Rubber Receiver Type D-G / D-G II

  DAIWARASHI

  An adjuster with a rubber-made base that is also optimal for slip prevention. Note: Please be advised that the model number in VONA has been changed from "D-G II" to "D-G2."
  
  [Features]
  · A rubber cover is used for the entire receiver, and an iron core is included inside.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	15.24 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Standard Receiver Adjuster, Space Saving Type D-B50 / D-A60 / D-A65

  DAIWARASHI

  A standard type adjuster in which the adjuster base is compact
  
  [Features]
  · An adjuster whose pedestal part is a compact type.
  · The screw rotates and tilts somewhat.
  · Since the receiver diameter is designed to be smaller than D-A/D-B, it is useful for saving space.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.81 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Adjuster KC-270

  TAKIGEN

  Selections are possible from a variety of types based on the application.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.22 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Adjuster Pad (Standard Type)

  WOOJIN

  [Features]
  · Since reinforced polyamide is used, it features excellent chemical resistance and oil resistance.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.24 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Level Adjuster (Anchor Type) (KAF)

  IMAO CORPORATION

  [Features] The stainless steel type has excellent corrosion resistance and water resistance. Approved load: 5 kN.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.29 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Level Adjuster (with Rubber) (KA)

  IMAO CORPORATION

  Excellent cost performance
  
  [Features]
  · Mounting is performed using the Phillips head slot on the bottom of the foot and the hex nut on the top of the foot.
  The bottom pad rubber has slip-prevention effect, cushioning properties, light vibration-proof performance, and liquid resistance.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.17 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Adjuster Bolt (500 / 600 kg Type) (with Foot Stop Plate)

  TRUSCO NAKAYAMA

  · Features an anchor hole for fixing to the floor.
  · A hole is provided to the pedestal part and to enable it to be fixed to the floor with an anchor. Used to prevent equipment movement caused by intense vibrations.
  · Machine tools, vending machines, conveyors, work benches, control panels, and scientific instruments.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	10.85 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  OHNO RUBBER, Vibration-Proof Leveling Pad O-Leg Level Adjuster, Horizontal Vibration-Proof Type

  OHNORUBBER

  [Features]
  · Devices are securely fixed by the friction of rubber.
  · A non-polluting material is used for the rubber part.
  
  [Uses]
  · Vibration prevention for various industrial equipment.
  · Level adjustments for equipment height.
  · Installation on floor surfaces.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	23.12 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Leveling Mount Space Saving Type (Light Duty)

  MISUMI

  [Features] This product can effectively use space even in the presence of obstacles.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.79 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Adjustment Pads / Economy

  MISUMI

  A one-piece levelling pin. [Material]SWRCH

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.89 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Adjuster AJ Series

  NANSIN

  A standard adjuster.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.80 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Engineering Plastic Leveling Pad (LSA32, LSAR32)

  IMAO CORPORATION

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.05 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Engineering Plastic Leveling Pad (LVA70, LVAR70)

  IMAO CORPORATION

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.69 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Engineering Plastic Leveling Pad (Adjustment Knob-Included Type) (LVA70-ELK, LVAR70-ELK)

  IMAO CORPORATION

  Features an excellent design.
  
  [Features]
  · Height adjustments are performed by manually turning a knob.
  · Falling off is prevented by a washer on the end surface of the screw part.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	60.01 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Engineering Plastic Leveling Pad (LSA25, LSAR25)

  IMAO CORPORATION

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.88 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Engineering Plastic Leveling Pad (LVA100, LVAR100)

  IMAO CORPORATION

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	28.73 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Engineering Plastic Leveling Pad (LSA40, LSAR40)

  IMAO CORPORATION

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.45 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Engineering Plastic Leveling Pad (LVA125, LVAR125)

  IMAO CORPORATION

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	39.88 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Leveling Foot Jack

  NABEYA

  A leveling foot jack that can be used together with an anchor bolt. Convenient for adjusting the levels of machine tools.
  
  [Features]
  · Convenient for adjusting the levels of machine tools.
  · Can be used together with an anchor bolt.
  · Ductile casting is used for the base plate and the load resistance is sufficient.
  · The adjustment stroke is large and can be used where ground subsidence is extreme.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	61.02 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Foot Jack FJV Model

  NABEYA

  [Features] Inexpensive foot lifter. [Bolt material] SWRCH15R

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.14 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Adjuster for Anchor Fixing with Reinforced Rib Receiver D-E V

  DAIWARASHI

  [Features]
  · It has been pointed out that the receiver of D-E II is easily bent since its thickness is zero. In response to this, the product has been modified to have about twice the strength of the conventional product, not by changing the plate thickness, but by increasing its hardness.
  · A steel plate reinforced type adjuster for which the base for anchor fixing includes ribs.
  · Please be advised that the model number in VONA has been changed from "D-E V" to "D-E5."

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.03 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Adjuster for Anchor Fixing (Thrust Bearing Equipped) WD-E II

  DAIWARASHI

  An adjuster for anchor fixing that features a thrust bearing capable of smooth leveling even when a load is applied. Note: Please be advised that the model number in VONA has been changed from "WD-E II" to "WD-E2."

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.35 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Adjuster for Anchor Fixing (Large Pedestal Type) D-E-W

  DAIWARASHI

  A medium load type adjuster for anchor fixing in which the base is wide and stable
  
  [Features]
  · By increasing the size and thickness of the pedestal part, the stability after installation and the resistance horizontal shaking of the anchor fixing part have been improved.
  · Note: The screw shaft tilts somewhat

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	20.90 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Adjuster for Slopes D-U-A

  DAIWARASHI

  A standard type adjuster for slopes in which the screw shaft part tilts even more.
  
  [Features]
  The receiver part has a larger hole· than the D-A type in order to enable it to receive the spherical structure of the upper part.
  · The spherical structure is divided into a sphere and a receiver.
  · The receiver has undergone spherical processing to enable the sphere to moves smoothly.
  · When M12/M16/M20 bolts are used, in the case of M16/M20, it is limited to about 15° since the hexagonal part comes in contact with the spherical portion.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.98 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Adjuster for Slopes, for Anchor Fixing D-U-E II

  DAIWARASHI

  An anchor fixing type adjuster for slopes in which the screw shaft part tilts even more. Note: Please be advised that the model number in VONA has been changed from "D-U-E II" to "D-U-E2."
  
  [Features]
  · The receiver part has a larger hole than the D-A type in order to enable it to receive the spherical structure of the upper part.
  · The spherical structure is divided into a sphere and a receiver.
  · The receiver has undergone spherical processing to enable the sphere to moves smoothly.
  · M12/M16/M20 bolts can be used.
  · The angle 35° is when using an M12 bolt, and when using M16/M20, since the hexagonal part contacts the spherical portion, it is limited to about 15°

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.08 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Adjuster with Bottom Part Rubber for Light Vibration-Proofing (Thrust Bearing Equipped) WD-A III /WD-B III

  DAIWARASHI

  An adjuster for light vibration-proofing with a thrust bearing that enables smooth leveling. Note: Please be advised that the model number in VONA has been changed from "WD-A III" to "WD-A3."
  
  [Features]
  · Since the rubber part comes in contact with the floor, floor damage is prevented.
  · A light vibration-proof type adjustment bolt.
  · However, since the rubber hardness is 80°, repulsion is higher than low elasticity rubber and does not demonstrate much of a vibration-proofing effect. For this reason, please compare with other vibration-proof types such as the D-G series when using.
  · Can easily be mounted using a screwdriver since a Phillips head slot has been provided on the bolt bottom.
  · A nylon washer is used between the receiver and bolt. and rotation is smooth.
  · Suitable for office equipment, etc.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.03 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Adjuster for Heavy Weights D-C / D-C / S

  DAIWARASHI

  A standard type adjuster for heavy loads
  
  [Features]
  · The receiver is a forged item.
  · Since it is a mold release surface that has undergone hot forging, unevenness does not stand out, unlike mold casting.
  · D-C-S has a luxurious feel since the surface of the receiver is grind-processed with a lathe.
  · Since the receiver is forged, it features a load resistance of 10 tons or more. However, since the screw is buckled first, load resistance depends on the screw diameter.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.98 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Adjuster for Heavy Weights with Rubber D-C-R

  DAIWARASHI

  A rubber equipped type adjuster for medium loads
  
  [Features]
  · Receiver features a chloroprene rubber coating.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.19 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Adjuster with Rubber for Heavy Weights (Bearing Equipped) D-H-R

  DAIWARASHI

  An adjuster equipped with rubber for medium loads featuring a built-in thrust bearing.
  
  [Features]
  · Since the receiver features a chloroprene rubber coating, there is no need to worry about it falling off, enabling it to be used with confidence.
  · Groove processing is applied to the rear surface of the rubber to make it non-slippery.
  · Effectively protects floors.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	71.86 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Adjuster for Heavy Weights (Bearing Equipped) D-H

  DAIWARASHI

  An adjuster for heavy weights with a built-in thrust bearing
  
  [Features]
  · Suitable for the adjustment of heavy machinery.
  · Stability is outstanding since a large diameter bolt is used.
  · Smooth adjustments can be made even for non-heavy machinery.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	43.81 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Adjuster for Heavy Weights (Long Screw Type) D-C-L / D-C-L/S

  DAIWARASHI

  A long screw adjuster with a wide adjustment range
  
  [Features]
  · Although the dimensions in the table are in increments of 50 mm, dimensions can be cut as desired upon request.
  A limited quantity of 500 mm total length products are available for M16 and M20.
  · D-C-LS has a luxurious feel since the surface of the receiver is grind-processed with a lathe.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.04 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Adjuster with Rubber for Heavy Weights (Wide Receiver Type) D-C III-R

  DAIWARASHI

  A wide base type adjuster for medium loads with rubber. Note: Please be advised that the model number in VONA has been changed from "D-C III" to "D-C3."
  
  [Features]
  · The receiver features a chloroprene rubber coating and the rear side of the rubber has undergone groove processing to make it resistant to slipping.
  · Has a larger outer diameter than D-C-R and feels more stable and heavy.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	23.14 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Standard Receiver Adjuster with Plastic D-A II /D-B II

  DAIWARASHI

  A standard type adjuster with plastic that does not damage the floor. Note: Please be advised that the model number in VONA has been changed from "D-A II" to "D-A2."
  
  [Features]
  · Does not stain or damage floors since a special plastic is molded into the receiver.
  · The plastic part has elasticity, feels good to touch, and features excellent aging resistance and temperature resistance.
  · Suitable for any machinery or office equipment since the external appearance also features a beautiful finish.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.36 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Standard Receiver Adjuster, Small Diameter Type D-F / D-F-C

  DAIWARASHI

  An adjuster whose screw and base have small diameters
  
  [Features]
  · Similar to the D-A and D-B types, it is structured so that a nut is pressed into the bolt protrusion inside the receiver, eliminating worries regarding the receiver falling off.
  · Manufactured to enable some play between the screw part and receiver, enabling its use on surfaces with a slight slope.
  · A light load type with a receiver diameter that is also small.
  · Thanks to the plastic coating on the outer circumference of the receiver, floors are not stained or damaged.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.11 €
  	Special price
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Adjuster for Walls D-D I

  DAIWARASHI

  A base cut type adjuster that does not protrude from the upper part and that prevents interference with other parts. Note: Please be advised that the model number in VONA has been changed from "D-D I" to "D-D1."
  
  [Features]
  · A special adjuster for walls.
  · Please use together with D-D II.
  · Please use accessories such as hex nuts, etc.
  · The portion that makes contact with the wall is folded.
  · As a result, the structure features a load resistance that is dramatically higher than products from other manufacturers in which the receiver is cut.
  · In terms of its relation to the wall surface, the bolt hole has undergone special machining different from that of normal catch plates.
  · Please refer to the drawings for use.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.73 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  AD-12 Adjuster with Bracket

  GIFU SANKEN KOGYO

  [Features] This is a levelling bracket for JM-65/75 castors.

  Select to compare

  Configure now
  Starting from∗ ：	14.11 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  AE Type Adjuster

  GIFU SANKEN KOGYO

  [Features] This is a levelling bracket for the TH-50/65 castors.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	18.05 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Recycle Adjuster K-287

  TAKIGEN

  Both disassembly and recycling are easy.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.09 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Adjuster Plastic Part KC-27

  TAKIGEN

  Selections are possible from a variety of types based on the application.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.09 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Quick Adjuster KC-24-3

  TAKIGEN

  Height adjustment can be easily performed just by pushing a button. After fixing, fine adjustments are possible by rotating the leg portion.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.05 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Level Adjuster KC-274

  TAKIGEN

  An adjuster that features a structure in which the screw part can freely swing within a range of about 15° and levels can be maintained even on tilted floors.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.39 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Level Adjuster KC-275-A

  TAKIGEN

  Suitable for machine tools and vending machines.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.27 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Level Adjuster KC-280

  TAKIGEN

  The rubber on the bottom portion is flame-retardant and non-migratory. Installation is easy since there is a Phillips head slot has been provided on the back of the screw part.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.43 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing ends 30/11/2024

  

  Level Adjuster KC-282

  TAKIGEN

  A low cost type in which the shaft part and bottom part are integrated.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.01 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

Loading...